Public Administrative Department Local Bodies Closing in 6 days TDR #56573336

Tender For Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27)

Issued by Local Bodies · Jalgaon, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Jul 2026
6 days left
EMD
10000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27)

BOQ

Name of Work:- Water Supply Deppt. (Annual rate maintenance contract for Electrical and Mechanical works) (2026-27)
Sl. No. Item Description
1Supplying and replacing MNX three pole power contactors {L&T MNX Power Contactors 415V AC (3 Pole)}/ Siemens/Metasol make 3 Pole, 3 Phase, AC (AC magnetic contactor, suitable for use with 3TF series motor control systems) for motor starter:
2MNX 9
3MNX 12
4MNX 18
5MNX 25
6MNX 40
7MNX 140
8MNX 185
9MNX 225
10MNX 300
11MNX 400
12MNX 550
13MNX 650
14SIEMENS - 3TF51
15SIEMENS - 3TF53
16LS Make MC - 225 a/4
17Supplying, erecting & marking MCB with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board:
1825 AMP 415 Volt mark
1932 AMP 415 Volt ISI mark
2040 AMP 415 Volt Isl mark
2163 AMP 415 Volt ISI mark
22125 AMP 415 Volt ISI mark
23200 AMP 415 Volt ISI mark
24Supplying and erecting electrical control panel electrical components:
25INDICATOR R, Y, B MAKE- TECNIC, 22.5 mm
26VOLT METR, range 0 - 500 volts, 96x96
27CT OPERATED AMMETER, range 0 - 200 amp., 96x96
28ROTARY SWITCH RYB AMP./VOLTMETER
29C- channel
30Rewinding of electric motor of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.:
31Upto 10 HP
32Upto 20 HP
33Upto 40 HP
34Upto 100 HP
35Upto 150 HP
36Upto 250 HP
37Upto 350 HP
38Upto 450 HP
39Supplying and replacing No-Volt-Coil for motor having DOL starter and Star-Delta Starter from:
40Upto 15 HP
41Upto 30 HP
42Upto 90 HP
43Upto 125 HP
44Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe:
452CX10 SQMM
464CX10 SQMM
474CX16 SQMM
484CX25 SQMM
494CX35 SQMM
504CX50 SQMM
513.5CX70 SQMM
523.5CX95 SQMM
533.5CX120 SQMM
544CX70 SQMM
554CX95 SQMM
564CX120 SQMM
574CX150 SQMM
584Cx180 SQMM
594CX240 SQMM
604CX300 SQMM
61Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe:
621CX25 SQMM
631CX35 SQMM
641CX50SQMM
652CX2.5 SQMM
662CX4 SQMM
672CX6 SQMM
682CX10 SQMM
693CX2.5 SQMM
703CX4 SQMM
713CX6 SQMM
723CX10 SQMM
734CX4 SQMM
744CX6 SQMM
754CX10 SQMM
76Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material:
772.5 to 16 sq.
7825 to 50 sq.
7970 to 95 sq.
80120 to 185 sq. mm.
81240 sq. mm.
82300 sq. mm.
83400 sq. mm.
84Supplying & erecting crimping type copper lugs for cable complete:
85Upto 50 sqmm
86Upto 70-120 sqmm
87Upto 150-300 sqmm
88400 sqmm
89Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), aluminium conductor laid in provided trench / pipe:
90Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 150 sq. mm. aluminiumconductor laid in provided trench / pipe
91Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminiumconductor laid in provided trench / pipe
92Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 240 sq. mm. aluminiumconductor laid in provided trench / pipe
93Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 300 sq. mm. aluminiumconductor laid in provided trench / pipe
94Supplying , erecting & terminating XLPE insulated galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 400 sq. mm. aluminiumconductor laid in provided trench / pipe
95Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material:
962.5 to 16 sq.
9725 to 50 sq.
9870 to 120 sq.
99150 to 185 sqm.
100240 to 300 sqm.
101400 sqm.
102Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )XLPE HT cable with necessary material:
103Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial
104Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
105Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial
106Providing and erecting Heat shrinkable out door termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial
107Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
108Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial
109Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial as
110Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
111Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessarymaterial
112Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x 400 sq. mm. with necessary material
113Fault detection and repairing of MCC panel and ATS panel:
114Fault detection and repairing of MCC panel and ATS panel as per site requirement (labour part only)
115Sub Stations (SS) works:
116Supply of transfomer oil
117Overhauling of 200 KVA transformer
118Overhauling of 800 KVA transformer
119Overhauling of 1000 KVA transformer
120Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 200 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp.
121Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 400 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp.
122Supplying and erecting, 11 kV outdoor type drop out fuse with insulatorcomplete with fuse holders, fuse barrel with metal fitting, fuse elementmounted on M.S. channel with working current of 15A capacity completeerected on provided cross arm.
123Supplying and erecting fencing of section having size 2450 mm in height fromground level and 1200 mm width with angle iron frame work erected in CCfoundation and painted complete as per specification no SS-AS/FSG
124Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m longfixed at the middle of the fencing frame and the other side inclined at 30 degreeangle, in cement concrete foundation of 15 x 15 x 40 cm complete duly paintedwith one coat of red oxide and two coats aluminium paint complete.
125Supplying and erecting double leaf hinged door each 1500 mm in width x 1850mm in height using B class, GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and paintedcomplete
126Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barbwith a gap between two bars of 75 mm. firmly fixed on provided angle supportswith necessary materials complete. (6.044 meters/kg.).
127Transportation of 11/22 kV transformer above 315 kVA to 1000 kVA withoutloading & unloading (for handing over to section store/ repair works only)
128Dismantling the existing distribution transformer of any capacity from theplinth / foundation safely without any damages.
129Dismantling existing DO / AB switch set complete from D.P. structure in anapproved manner.
130Supplying and erecting 11 kV fuse barrel with metal fittings complete.
131Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWGcomplete erected for connections on H.T. sides.
132Supplying and erecting extra thick alkathene pipe 10 mm dia. erected toenclose bare conductor wires complete.. (use shall be restricted to H.T.)
133Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mmsuitable for 11 kV with brass couplings etc. for removing drop out fuses at 6meters length, 4 pieces each with rain shade with hand grip including earthlingchain 1.5m complete.
134Supplying and erecting copper tubular bus 20 mm dia 1.6 mm (16 SWG) thickfor the use of high tension over head bus and erected on provided HTinsulators with clamps, nuts and bolts complete. (weight per meter of bus isabout 1.7 kg.)
135Supplying and erecting clamps, made out of 25x3 mm, copper strips to befixed to tubular bus for connecting the bare copper wire to other equipment, withbrass nuts bolts of suitable dia complete.
136Supplying and erecting anti climbing devices, fabricated from pole clamps ofMS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erectedon pole complete.
137Supplying and fixing PVC synthetic elastomer electrically insulating matwith class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thicknessup to 11 kV
138Supplying , erecting Indoor LED Fittings:
139Supplying and erecting CRCA powder coated corridor/passage light LEDfitting (4 feet) Max. 17W with high transitivity diffuser with system lumensoutput of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCTupto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95,operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / woodenboard with 3 years warranty.
140Supplying , erecting Outdoor LED Fittings:
141Supplying and erecting integrated LED flood light fitting Max. 100W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty
142Supplying and erecting integrated LED flood light fitting Max. 195W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty
143Supplying , erecting point wiring and MCBDBs:
144Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduitwith 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthingand required accessories as per specification No: WG-PW/SW
145Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type)
146Supplying , erecting Cable Enclosures / Excavation and Earthing:
147Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete erected at the position with necessary materials dulypainted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority.
148Supplying and laying (including excavation of suitable width & depth up to 90 cm)120 mm outside dia. double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
149Supplying and laying (including excavation of suitable width & depth up to 90 cm)160 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
150Supplying and laying (including excavation of suitable width & depth up to 90 cm)200 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
151Excavating hard Rock or bituminous road by chiselling for preparing pit forpole / stay/earth plate / for laying cable/ pipe & clearing the site by removingdebris & making the site as required complete.
152Excavating hard murum / stone metal road by chiselling for preparing pit forpoles stay or earth plates or for laying cables, pipes & clearing the site byremoving debris & making the site as required complete.
153Excavating soft murum / soft soil road by chiselling for preparing pit for polesstay or earth plates or for laying cables, pipes & clearing the site by removingdebris & making the site good complete.
154Supplying & laying (including excavation) half round reinforced cementconcrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in properline, level and slope including providing and fixing collars in cement mortar 1:2and curing etc. complete.
155Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm withfunnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results
156Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results
157Supplying, installation and testing of maintenance free earthing comprising ofElectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecularcopper bonded earthing rod of Length 3m along with 25 kg Carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the results
158Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnelwith a wire mesh for watering and brick masonry block C.l. cover with minimum25 kg Carbon based environment friendly back fill Ground Enhancing compoundcomplete with all materials, testing & recording the results
159Supplying and erecting GI strip of high purity required size used for earthing onwall and/or any other purpose with necessary GI clamps fixed on wall paintedwith bituminous paint with joints required.
160Service charges for Manpower of Services:
161Service charges for Manpower of Helper Services
162Service charges for Manpower of Skilled Electrician Services
163Supply and installation of Lifting tools and tackels:
164Manual chain pulley block with trolly (capacity- 5 Tonnes)
165Electrical hoist of capacity- 5 Tonnes with trolley
166Supply and installation of Steel Poles:
167Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm diawith 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively andtotal 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg)
168Supply and installation of Accessories for Outdoor Fittings:
169Supplying and erecting Street light bracket for erection of Double fittingmade from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole capof 300 mm length 100 mm dia duly welded
170Supply and installation of WIRING:
171Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire.
172Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire.
173Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories
174Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories
175Repairing work for 20 HP Centrifugal Motor Pump set:
176Supply of Following spares for above pumpset:
177Motor Cooling Fan
178Rotter Balancing
179Best Quality grease AP 3
180Bearing Cap
181Motor Top bearing
182Motor Bottom bearing
183Motor top and bottom Shaft Welding Turning
184Oil Seal
185Bearing check - nut
186Motor housing Cover Top
187Motor housing Cover Bottom
188Motor connection plate
189Motor connection lugs
190Pump Shaft Sleeve S/S
191Pump Shaft S/S (New)
192Pump Shaft Balance
193Pump Impeller
194Impeller Neck Ring
195Impeller Balance
196Impeller diffuser
197Oil seal & Mechanical Seal
198Coupling Bush
199Repairing work for 30 HP Centrifugal Motor Pump set:
200Supply of Following spares for above pumpset:
201Motor Cooling Fan
202Rotter Balancing
203Best Quality grease AP 3
204Bearing Cap
205Motor Top bearing
206Motor Bottom bearing
207Motor top and bottom Shaft Welding Turning
208Oil Seal
209Bearing check - nut
210Motor housing Cover Top
211Motor housing Cover Bottom
212Motor connection plate
213Motor connection lugs
214Pump Shaft Sleeve S/S
215Pump Shaft S/S (New)
216Pump Shaft Balance
217Pump Impeller
218Impeller Neck Ring
219Impeller Balance
220Impeller diffuser
221Oil seal & Mechanical Seal
222Coupling Bush
223Repairing work for 40 HP Centrifugal Motor Pump set:
224Supply of Following spares for above pumpset:
225Motor Cooling Fan
226Rotter Balancing
227Best Quality grease AP 3
228Bearing Cap
229Motor Top bearing
230Motor Bottom bearing
231Motor top and bottom Shaft Welding Turning
232Oil Seal
233Bearing check - nut
234Motor housing Cover Top
235Motor housing Cover Bottom
236Motor connection plate
237Motor connection lugs
238Pump Shaft Sleeve S/S
239Pump Shaft S/S (New)
240Pump Shaft Balance
241Pump Impeller
242Impeller Neck Ring
243Impeller Balance
244Impeller diffuser
245Oil seal & Mechanical Seal
246Coupling Bush
247Repairing of 60 HP V.T Pumpset
248Removing and Dismaintling of 60 HP V.T pump set with allied equipments etc complete
249Supply Of Submersible Pump
2501 HP Submersible Pump
2512 HP Submersible Pump
2523 HP Submersible Pump
2535 HP Submersible Pump
25410 HP Submersible Pump
25512.5 HP Submersible Pump
25615 HP Submersible Pump
2571 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
2585 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
2597.5 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26010 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26112.5 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26215 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26320 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26425 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26530 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
26640 एच.पी.सबमर्सिबल मोटर मोटर रिवाईन्डींग करणे
2671 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
2685 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
2697.5 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27010 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27112.5 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27215 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27320 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27425 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट
275बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
27630 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
277सबमर्सिबल पंप दुरुस्ती
27840 एच.पी.सबमर्सिबल पंप काम करणे.(थ्रस्ट बेरिंग,बुशिंग,स्लीव्हज,इम्पेलर ईत्यादी आवश्यक सर्व कामे व वाहतूक,पंप काढणे टाकणे कार्यन्वित करणे सहित
279केबल वायर पुरवठा करणे
280केबल वायर 1 एम.एम. Alluminium
281बल वायर 1.5एम.एम. Alluminium 3 core
282बल वायर 2.5 एम.एम. Alluminium 3 core
283बल वायर 4 एम.एम. Alluminium 3 core
284बल वायर 10 एम.एम. Alluminium 3 core
285केबल वायर 1 एम.एम. Copper 3 core
286केबल वायर 1.5 एम.एम. Copper 3 core
287केबल वायर 2.5 एम.एम.Copper 3 core
288केबल वायर 4 एम.एम. Copper 3 core
289केबल वायर 10 एम.एम. Copper 3 core
290मल्टी मीटर टेस्टिंग
291स्‍टार्टर पेटी पत्री
292स्‍टार्टर पेटी लोखंडी
293बोअर क्‍लॅम्‍प
294सर्व्‍हीस वायर Alluminium
295सर्व्‍हीस वायर Copper
296टेस्‍टर
297स्‍कूरू डायव्‍हर
298पेंचीस (पकड)
299टेफलॉन टेप
300Supplying & erecting DOL starter:
3017.5 H.P.
302Supplying & erecting Star Delta Starter:
30320 H.P.
30415 H.P
305Supplying & erecting HRC fuse cartridge 415V:
30660 Amp
30780 Amp
308100 Amp
309125 Amp
310150 Amp
311200 Amp
312Supplying & replacing timer for STAR/DELTA motor starter:
313GIC Stardelta Timer
314GIC Timer SM-301
315Select 800SD
316Time Switch Timer
317Supplying and replacing thermal over load relay for motor starter:
318Relay Range 4 to 6 Amp
319Relay Range 9 to 14 Amp
320Relay Range 13 to 21 Amp
321Relay Range 45 to 75 Amp
322Supplying & erecting four pole ON LOAD change over switch, 415V, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3:
32325 AMP 415 Volt mark
32432 AMP 415 Volt ISI mark
32540 AMP 415 Volt ISI mark
32663 AMP 415 Volt ISI mark
327125 AMP 415 Volt ISI mark
328200 AMP 415 Volt ISI mark
329Repairing of motor starter (Rate quoted per HP of pump) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56573336
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 28-07-2026
Authority
Authority Name Directorate Of Municipal Administration
Work Description Tender for Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27)
Basic Detail
Tender No MC/WS/2026-27/02ELECTRICAL
Bidding Type Tender
Location
City Jalgaon
State Maharashtra
Key Dates
Publish Date 21 Jul 2026
Submission Date 28 Jul 2026
Open Date 29 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee 2000
EMD 10000
Exemption Not Available
Document List
bc2c5fee-66bb-4f6c-a0ca-eb34e732af2f.html
BOQ_2261264.xls
NIt.pdf
Tendernotice_1.pdf
TP.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Jul 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

bc2c5fee-66bb-4f6c-a0ca-eb34e732af2f.html

xls

BOQ_2261264.xls

pdf

NIt.pdf

pdf

Tendernotice_1.pdf

pdf

TP.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders