Tender For Construction Of Vehicle Parking Shed For Heavy Vehicles Size 72X40 At 7Th Bn Tsr Sangkumabari J Uijala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
16 days left
EMD
28438
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sepahijala → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Vehicle Parking Shed For Heavy Vehicles Size 72X40 At 7Th Bn Tsr Sangkumabari J Uijala
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m widh or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slop, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level: (i) 1:3:6 ( 1 Cement: 3 fine sand: 6 graded well burnt brick aggregate 40 mm nominal size) |
| 4 | (ii) 1:11/2 : 3 ( 1 Cement: 11/2 fine sand : 3 graded well burnt brick aggregate 20 mm nominal size) |
| 5 | Centering shuttering including strutting, propping etc. and removal of form work for : (i) Columns, Pillars, Piers, Abutments, Posts and Struts with wooden plank |
| 6 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand) |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (i) Hot finished welded type tubes |
| 8 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc, complete |
| 9 | 12 mm cement plaster of mix in/c. neat cement punning (i) Cement mortar 1:4 ( 1 Cement : 4 fine sand) |
| 10 | Supply & installation of pre-painted Galvalume sheets roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zine Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge (i) 0.50mm thickness |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. all kinds of soil |
| 12 | Providing and laying dry flat brick flooring in required pattern complete |
| 13 | Painting with synthetic enamel point of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacture]: Two or more coats on new work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender