Tender For Repair And Replacement To Doors, Windows, Flooring, Sanitary Fittings And Related B/R Work To Various Energy Conservation Utility Support Installations At installation Tunir Area Under Age B/R-Ii At Naval Station Karanja
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Replacement To Doors, Windows, Flooring, Sanitary Fittings And Related B/R Work To Various Energy Conservation Utility Support Installations At installation Tunir Area Under Age B/R-Ii At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 2 | All as per item No.1 above but exc 1.5 sqm and not exc 4 sqm each, complete all as specified and as directed |
| 3 | Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge. |
| 4 | Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each and refixing in same opening after resecuring or easing, and adjusting complete all as specified and directed by Engr-in-charge |
| 5 | S&F 2nd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered or ornamental type put together with glue pinned at joints, complete all as specified and directed |
| 6 | M&L for second class hardwood, 30 mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed |
| 7 | M&L for second class Hardwood 30 mm thickness, glazed and skeleton door shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and directed by Engr-in-Charge. |
| 8 | Material and Labour for Flush shutter, 30mm thick factory made, solid core construction, with block board core, suitable for exterior & interior grade door, both faces covered with decorative face veneer with lipping/frame to match, complete all as specified and directed by Engr-in-Charge. |
| 9 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer and necessary S S screws shall be paid separately), complete all as specified and directed |
| 10 | S& Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 11 | S& Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge.Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 12 | S&F in repair 18/19mm thick medium density fibre boards, exterior grade, commercial type, and both faces covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick, and all around side faces is covered with decorative lipping complete prepared as cupboard shutter and fixed with wooden frame-work complete alll as specified and directed |
| 13 | S&F in repair to cabinet Hinges soft close SS 8 crank complete all as specified and directed |
| 14 | S&F magnetic catcher 55x29 mm size for continuous opening and closing of doors shutter like use for door megnet lock, cupboard magnetic lock, wardrobe, and similar use including all fitting like screw etc. complete all as specified and directed |
| 15 | S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified and directed |
| 16 | S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC ,C\\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 17 | S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items,with and making good to the disturbed portion with its original specifications incl taking down existing members / frame any position complete all as specified and directed. |
| 18 | S&F in repair 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F concealed star lock, powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and directed |
| 20 | M&L for 4 mm thick plain sheet glass ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows / doors / partition etc complete all as specified and directed. |
| 21 | S&F 4 mm thick Sheet glass, ordinary quality, ground or obscured or frosted, on one side and glazing in wooden, Aluminium, steel frame in square of any size complete all as specified and directed. |
| 22 | Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 23 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane, complete all as specified and directed by the Engr-in-Charge. |
| 24 | S&F for rubber beading suitable for fixing 4-5mm thick glass in aluminium window / doors etc complete all as specified and as directed. |
| 25 | S&F in repair aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed. Make of grill Deco grill or equivalent |
| 26 | S&F in repair aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed |
| 27 | S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F stainless steel bright polished Handle, 10mm dia of shoot and 200mm long complete all as specified directed by Engr in Charge. |
| 29 | S&F extruded aluminium alloy handles fabricated type anodized 150 mm size, complete all as specified and directed |
| 30 | S&F 125mm size stainless steel Butt hinges medium weight, cold rolled and fixed, complete all as specified and as directed. |
| 31 | S&F 100mm size butt hinges extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21, complete all as specified and as directed. |
| 32 | S&F 200 mm stainless steel barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F 250mm dia Stainless steel sliding door bolts, Clip type with bright bolt not less than 12mm dia with a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified by Engineer-in -Charge. |
| 35 | S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed |
| 36 | S&F two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed. |
| 37 | M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 38 | Material and Labour for preparation of old wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by the Engr-in-Charge. |
| 39 | M&L for petty repairs to taking down steel / wooden window / ventilator frame with shutters exc .5 sqm nexc 1.5 sqm each shutter, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minors such as screws, clamps, cleats etc and refixing in the same opening (no extra payment will be paid for external window shutters of upto 10th floor) complete all as specified and as directed by Engineer-in-Charge. |
| 40 | M&L for Petty repairs to taking down wooden/PVC door shutters exc. 1.5 sqm n. exc. 4 sqm each shutter, repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc, replacement of minor items such as screws, cleats, clamps etc and re-fixing on the same opening with and including fixing of new hinges on existing steel chowkhat frame by way of welding etc. complete all as specified and as directed by Engineer-in-Charge |
| 41 | M&L for carefully cutting and removing the required portion of the existing window frame, shutters, and glazing to create an opening suitable for installation of a window-type air conditioner, including all necessary supports and making good the remaining portion of the window matching with existing frame sections, panels, or glazing to restore aesthetics and weatherproofing. All cutting, fixing, sealing, and finishing shall be carried out in a workman like manner, ensuring no damage to the surrounding structure, complete in all respects as directed by the Engineer-in-Charge |
| 42 | Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 43 | M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like with and including 15mm thick bedding layer in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 44 | M&L for Granite (of any type) tiles 20mm thick machine cut, in floors, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including screed bed 20mm thick in CM 1:4 complete all as specified and directed. |
| 45 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 46 | M&L 20-25 mm thick machine cut Kota stone slab flooring laid over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L 20-22 mm thick machine cut Kota stone in riser of steps, skirting, dado, and pillar laid over and including 10mm thick backing coat in cement mortar 1:3 and jointed with with grey cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge. |
| 48 | M&L for providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed |
| 49 | M&L for chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with grey cement and pigments in any colour machine preassed glazed, laid over and including cement screed bed, 15mm thick in cement motor 1:6 complete all as specified and as directed by Engr-in-charge. |
| 50 | Material and Labour for machine pressed precast concrete interlocking paver block glossy finish, any shape & size with grey cement & pigment conforming to IS 15658-2006 of 60 mm thick, M-35 grade, complete all as specified and directed by Engineer-in- Charge. |
| 51 | Material and Labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 52 | Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed. |
| 53 | M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 1:2:4 (20mm graded aggregate) and setting in mortar (1:6) complete all as specified and as directed |
| 54 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m, complete all as specified and directed |
| 55 | M&L for 15mm thick ready mix rendering on brick work or concrete surfaces, mixed with water proofing compund, finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. (Note for item nos. 55, 57 & 58:- (i). Water proofing compund shall be measured and paid separtately(ii). The quoted unit rate shall be deemed to include the cost of scaffolding, all necessary arrangements, and safety measures for work at any building height. No additional payment shall be admissible on this account |
| 56 | Supply only water proofing liquid compound complete all as specified and directed. |
| 57 | M&L for 10mm thick ready mix rendering on fair faces of brick/concrete surfaces, mixed with water proofing compund, finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L for 5mm thick ready mix rendering on ceiling or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed |
| 59 | M&L for three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specified and directed |
| 60 | M & L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed |
| 61 | M&L for preparation of new plastered surfaces on walls of any description not otherwise described over 10cm width or girth and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed |
| 62 | Dismantling of floor, hearth or wall tiling including cement mortar bedding including backing coat etc., removing serviceable tiles to store and rubbish off the premises and removal outside complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L for glazed ceramic coloured tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry including 10mm thick backing coat in cement mortar 1:3 and pointed in coloured cement to match for work on vertical surface etc complete all as specified and as directed by Engr-in-Charge.Note:- Designer concept tiles matching with existing tiles. |
| 64 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm in floor laid over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as directed by Engr-in-Charge. |
| 65 | M&L for Vitrified ceramic coloured light shade tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed by Engineer-in-Charge |
| 66 | M&L for Vitrified ceramic coloured light shade tiles 10mm thick such as skirting, dado, on walls etc jointed in neat cement slurry including 10mm thick backing coat in cement mortar 1:3, pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for 10-12 mm thick glossy finish heavy duty vitrified tiles for parking/ path etc (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in 1:4, complete all as specified and as directed by Engr-in-charge. |
| 68 | Demolition of Cement concrete of any description and in any position complete all as specified and directed. |
| 69 | M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregates) as in sub base, sub floors, pavings, etc, complete all as specified and as directed by Engr-in-Charge. |
| 70 | M&L for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and directed. |
| 71 | M & L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggretate) as in surface channel or drain complete all as specified and directed. |
| 72 | M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping bed black etc including necessary form work complete all as specified and directed. |
| 73 | Material and labour for 75mm thick cement concrete type C-1, 1:3:6, using 20mm graded crushed stone aggregate as in plinth protection, finished fair even, laid in bays n.exc. 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 74 | M&L PCC 1:2:4 type B2 using (40mm graded aggregate) as in flooring, ramp, surfaced even and fair without using extra cement and mixed with metallic floor hardener @3 % by weight of cement complete all as specified and directed. Note:- Metallic floor hardener shall be measured and paid separately. |
| 75 | Supply only Metallic floor hardener, complete all as specified and directed |
| 76 | M&L for machine cut broken stone or boulders of gauge not exc 63mm as in hard core n exc 150mm thick spread and levelled including watering & ramming complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 78 | S&F brass chromium plated shower rose 125mm size with CP arms of length upto 60 cm for 15mm bore pipe. complete all as specified and as directed by Engineer-in-Charge. |
| 79 | S&F in repairs wash down water closet pan (pedestal pattern), with P or S trap including 10 ltr flushing cistern valveless, syphonic action type high level with inlet ball valve float and flush pipe and fixed with seat cover for pedestal pan with plastic water closet seat etc complete all as spectified and directed by Engr-in-Charge. Make:- Cera/Jaquar/Hindware |
| 80 | S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of concrete bedding complete all as specified and directed.Make:- Cera/Jaquar/Hindware |
| 81 | S&F in repair vitreous china coloured half stall urinal of size 480x300x740mm brass chromium plated brackets, fitting and waste coupling, CP bottle trap, urinal spreader, PVC connection etc complete all as specified and as directed by Engineer-in-Charge.Make:- Cera/Jaquar/Hindware |
| 82 | S & F in repair vitreous China wash hand basin white, flat back of size 550x400mm fixed on and including cast iron cantilever bracket, Waste fittings, 32 mm dia waste coupling of brass, chromium plated including fixing of tap, waste fitting etc complete all as specified and directed.Make:- Cera/Jaquar/Hindware |
| 83 | Supply and Fix in repair curved shaped urinal partition with frosted 8 mm thick glass chrome finish fittings of size 900 x 450 mm fixed with stainless steel bracket with SS screw on wall mounted complete all as specified and directed by Engr-in-Charge. Make:- Jaquar cat part No JSE-CHR-810UC450X or equivalent |
| 84 | Supply and Fix in repair vitreous china ceramic white urinal partition of size 650 x 320 mm fixed with stainless steel bracket with SS screw on wall mounted complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F in repair 75mm bore PVC(SWR) bends any radius with access door complete all as specified and directed |
| 86 | S&F in repair 110mm bore PVC(SWR) bends any radius with access door complete all as specified and directed |
| 87 | S&F of 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down of Old PVC/CI Pipe line complete all as specified and directed |
| 88 | S&F of 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down of Old PVC/CI Pipe line complete all as specified and directed |
| 89 | S&F in repair of stainless steel soap dish fancy type chromium plated fixed in wall complete all as specified and as directed. |
| 90 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed |
| 91 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed |
| 92 | S&F in repair LED Mirror with Touch Sensor, 50 Inch x 30 Inch Wall Mounted, 3 Light Effects Decorative Mirror complete all as directed by Engr-in-Charge. |
| 93 | Supply and Fix in repair brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed |
| 94 | S&F in repair bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type chromium plated as complete all as specified and directed Make:- Cera/Jaquar/Hindware |
| 95 | S&F 15 mm bore Pillar tap in repair cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with long screws shanks and nut complete all as specified and directed Make Cera/Jaguar/Hindware |
| 96 | S&F in repair Stop cock or angle valve cast copper alloy ,chromium plated fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe, complete all as specified and directed. Make Cera/Jaguar/Hindware |
| 97 | S&F in repair Brass CP waste coupling 31/32mm bore of discharge (Half or full threaded), complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F in repair for designer bevelled edge looking mirror of selected quality glass of 6mm thick having four holes on corners fixed to walls with CP Brass screws with fancy type head top complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F in repair 100 mm dia stainless steel floor grating with hole or without hole all as specified and directed by Engr-in-Charge. |
| 101 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking down of old Pipe line complete all as specified. |
| 103 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking down of old Pipe line complete all as specified. |
| 104 | S&F 15 mm bore Gl tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down of old Pipe line all as specified and directed. |
| 105 | S&F 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down of old Pipe line all as specified and directed. |
| 106 | S&F 40 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down of old Pipe line all as specified and directed. |
| 107 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed |
| 108 | Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering, complete all as specified and directed |
| 109 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 110 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 111 | Dismantling structural steel works in doors, gates etc but excluding framed truss etc complete all as specified and directed |
| 112 | S&F of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E- 250) quality A, complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F of framed work such as grills, gratings,post of angle iron etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engr-in-Charge.Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using generator sets or any alternative arrangement complete all as specified and as directed. |
| 115 | S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, holdfast etc, of grade Fe 410-W (Gde E-250) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed. |
| 116 | S&F of mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410 W (Gde-E-250) quality-A complete all as specified and directed by Engr-in-Charge |
| 117 | M&L for preparing new or previously untreated steel surface of any decription over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 118 | M&L for preparing old steel surface of any decription over 10cm in width or girth and applying two coats of applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 119 | S&F in repair stainless steel 25mm dia tubular curtain rods (Medium weight) fancy type with brackets ,stops, rollers etc complete all as specified and direced by Engr-in-Charge. |
| 120 | Supply and Fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 121 | Raking out joints of ceramic tiles as in wall or floor upto 6-7mm deep and repair with neat epoxy adhesive and white cement as required with pigment using chemical for quick setting and stop leakage as specified by manufacturer and making good and check up to 7 days for stop leakage complete all as specified and as directed by Engineer-in-Charge. |
| 122 | Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MoD land, complete all as specified and as directed by Engr-in-charge. Note :- 1. Taking down earthing strips including insulators from roof for treatment and re-fixing of same with existing specification in the same position after laid APP membrance including replacement of broken insulators, PVC rawl plus & screws etc are deemed to be inclusive of rate quoted by the contractor.2. Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.3. APP work shall be carried out on RCC PENT roof at 12 -15 mtr height (non accessible roof). |
| 123 | Demolition of cement concrete ground floor and paving nexc. 15 cm thickness (below above ground floor ) complete all as specified and directed by Engr-in-Charge. |
| 124 | M&L for PCC (1:2:4) type B-0, using 12.5 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope, mixed with WPC by weight of total cement, same like as in chajjas, balconies, canopies, desk slabs and in shelves and finished the surface even and smooth without using extra cement, complete all as specified and directed.Note : WPC shall be measured and paid separately. |
| 125 | M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specifed and directed |
| 126 | M&L for 10 mm thick ready mix cement plaster on roof top and chajja and concrete surface mixed with WPC as per manufacturer’s instructions on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 127 | M&L water proofing treatment of roof consisting of the following provisions:-(a) Apply oil bound bituminous primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of 4mm thick APP polymeric membrane of weight not less than 4.50 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions and as decribed under particular specifications.(c) The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications |
| 128 | M&L for applying two coats of Bitumen water proofing aluminium heat resistance paint on the roof as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge. |
| 129 | M&L for preparation of plastered or unplastered old decorated surfaces of walls and ceiling by all as specified and filling cracks/hole by applying walls and ceiling putty (multipurpose mixer will be used for uniform and proper mixing of putty) and M&L for applying one coat of distemper oil emulsion white or coloured by auto roller complete including removal of nails etc and grinding where necessary complete all as specified & directed. |
| 130 | M&L For Preparation old decorated plastered and unplastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by complete scraping with wire brush and washing with water and applying applying wall care putty upto 2 mm thick (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed. Note:- 1. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 131 | Complete removal of existing treatment of walls and M&L for applying two coats of acrylic (antifungal) exterior grade paint of camouflage pattern over one coat of primer on wall/roof by auto roller complete upto 4th storey including necessary scaffolding etc complete all as specified and directed. |
| 132 | Preparation of old wall surfaces of any description and M&L for applying one coat of acrylic (antifungal) exterior grade paint of camouflage pattern by auto roller upto 4th storey including necessary scaffolding etc complete all as specified and directed. |
| 133 | M&L for old wall complete removal of existing treatment on external wall surface by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc. and fill the visible cracks/joints with crack seal caulking compound after cleaning the surface by clean water. Apply a coat of primer (water based primer) and allow to dry for six hours. Thereafter, apply two coats of water proofing treatment on wall (WB high build anti carbonation cum water proofing including a coat of exterior grade weather proof acrylic emulsion paint by using Airless Paint Sprayer machine at any height of the building by using scaffolding complete all as specified and manufacturer instruction and directed by Engineer-in-charge/GE.Make:- Pidilite, Berger, Asian Paints and Chemistic. Note:- (i) The material used for the teratment must have crack binding ability, water proofing properties and flexible (i.e cover hairline cracks upto 2mm effectively) and be elastomeric.(ii). External water proofing treatment on wall at any height of the building including acrylic paint shall be applied by mechnaically Airless paint sprayer machine only.(iii). The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender