Tender For Repair/Maint Of Servo Stabilizer, Ups And Its Batteries Alongwith special Power Supply At Afs Phalodi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Servo Stabilizer, Ups And Its Batteries Alongwith special Power Supply At Afs Phalodi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work : REPAIR/MAINT OF SERVO STABILIZER, UPS AND ITS BATTERIES ALONGWITH SPL POWER SUPPLY AT AFS PHALODI Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Shifting after disconnecting/dismantling primary & secondary connection carefully of servo voltage stablizer out door/indoor type complete of capacity 50 KVA to 300 KVA from its foundation and safely shifting one place to another place where directed by Engr-in-charge and reconnection of cabling ,earthing ,install testing and commissoning of the servo voltage stablizer. complete all as specified and directed.Note:- Cost of Necessary tools and plants such as Vehicle, hydra/Crane etc should be deemed to be included in the unit rate quoted. |
| 3 | M&L painting of servo stabilizer extrenally spray painting with one coat synthetic enamel paint of grey colour after cleaning surface throughly with thinner and scrapper and preparing the surface to required standard including writing and making such as MES No on the body of servo stabilizer of capacity upto 75 KVa complete all as specified and directed. |
| 4 | M&L painting of servo stabilizer externally spray painting with one coat synthetic enamel paint of grey colour after cleaning surface throughly with thinner and scrapper and preparing the surface to required standard including writing and making such as MES No on the body of servo stabilizer of caapacity 100 KVA to 300 KVA complete all as specified and directed. |
| 5 | M&L complete servicing of working/non working existing servo voltage stabilizer automatic operation three phase of various makes & capacity exceeding 16 KVA but not exceeding 75 KVA at different locations by dismantling / opening the stabilizer for checking the parts/components, circuit for proper functioning, cleaning inside the stabilizer, replacement of defective minor items i,e. screws, lugs, cut out/fuses etc. Reassembling the stabilizer, testing on rated equipment load for automatic operation to stabilizer standard out put voltage, complete all as specified and directed. Note:- (i) Cost of Necessary tools and plants such as Vehicle, hydra/Crane etc & transportation of any spare part or sub assembly of servo voltage stabilizer to civil work shop for further repairs shall be deemed to be included in the unit rate quoted. (ii) Any spare part of stabilizer if found defective will be measured as supply and fix in repairs under respective item of schedule. |
| 6 | ditto as ser item No. 04 but capacity above 100 KVA but not exceeding 300 KVA complete all as specified and directed. |
| 7 | ditto as ser item No. 04 but capacity above 300 KVA complete all as specified and directed. |
| 8 | S&R Push button switch suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 9 | S&R Auto manual switch suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 10 | S&R Micro switch suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 11 | S&R PCB holder suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 12 | S&R Carbon bush suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 13 | S&R Carbon bush holder suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 14 | S&R Trigger transformer suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 15 | S&R Amp metre selector switch suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 16 | S&R Shunt coil 220 Volt,AC suitable for servo voltage stabilizer of any capacity complete all as specified and directed. |
| 17 | Supply and fix in repair electronic circuit card (PCB) suitable for automatic three phase stabilizer of any capacity of various make with high & low voltage cutout device but excluding ICS, complete all as specified and directed. |
| 18 | Supply and fixing in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,20 to 40 KVA,415 V,50 Hz, complete all as specified and directed. |
| 19 | Supply and fixing in repair Servo motor with RC net work 3Kg Suitable for 3 Phase Voltage Stabilizer ,50 to 75 KVA,415 V,50 Hz, complete all as specified and directed. |
| 20 | Supply and fixing in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,100 to 150 KVA,415 V,50 Hz, complete all as specified and directed. |
| 21 | Supply and fixing in repair Servo motor with RC net work 10Kg Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA,415 V,50 Hz, complete all as specified and directed. |
| 22 | Supply and fixing in repair Control circuit Low/high Cut off with relay suitable for 3 Phase Voltage Stabilizer ,40 to 60 KVA,415 V,50 Hz, complete all as specified and directed. |
| 23 | Supply and fixing in repair Control circuit Low/high Cut off with relay suitable for 3 Phase Voltage Stabilizer ,75 to 300 KVA,415 V,50 Hz, complete all as specified and directed. |
| 24 | M&L in repair gasket Sets suitable for 3 Phase Voltage Stabilizer of capacity 50 KVA to 300 KVA complete all as specified and directed. |
| 25 | S&F in repair gear and driver assembly capacity exceeding 50 KVA but not exceeding 100 KVA per phase of servo vloltage stabilizer complete all as specified and directed. |
| 26 | S&F in repair gear and driver assembly capacity exceeding 100 KVA but not exceeding 300 KVA per phase of servo vloltage stabilizer complete all as specified and directed. |
| 27 | M&L in repair Main Boosting TR rewinding (Copper winding heavy duty) Suitable for 3 Phase Voltage Stabilizer 50 to 150 KVA,415 V,50 Hz, complete all as specified and directed. |
| 28 | M&L in repair Main Boosting TR rewinding (Copper winding heavy duty) Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA,415 V,50 Hz, complete all as specified and directed. |
| 29 | S&F in repair Main boosting transformer core made of CRGO silicon steel suitable for 3 phase voltage stabilizer of capacity 50 to 150 KVA, 415 V, 50 Hz complete all as specified and directed. |
| 30 | S&F in repair Main boosting transformer core made of CRGO silicon steel suitable for 3 phase voltage stabilizer of capacity 200 to 300 KVA, 415 V, 50 Hz complete all as specified and directed. |
| 31 | M&L in repair Dimmer (variac) rewinding with Copper winding Suitable for 3 Phase Voltage Stabilizer ,50 to 150 KVA,415 V,50 Hz complete all as specified and directed. |
| 32 | M&L in repair Dimmer (variac) rewinding with Copper winding Suitable for 3 Phase Voltage Stabilizer ,200 to 300 KVA,415 V,50 Hz complete all as specified and directed. |
| 33 | S & F Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 200 Amps, 36 KA,415 volts AC complete including taking down of existing U/S one complete all as specified and directed. |
| 34 | S & F Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 250 Amps, 36 KA ,415 volts AC complete including taking down of existing U/S one complete all as specified and directed. |
| 35 | S & F Adjustable thermal & Adjuatable magnetic setting MCCB Four pole 350 Amps, 36 KA415 volts AC complete including taking down of existing U/S one complete all as specified and directed. |
| 36 | S & F Adjustable thermal & Adjuatable magnetic setting MCCB three pole 400 Amps, 36 KA rating,Ics=75% Icu ,415 volts AC complete inculding taking down of existing U/S one complete all as specified and directed. |
| 37 | M /L for repair / servicing of existing UPS panel including dismantling electric connection and cleaning of realy junction point, connection & testing of UPS panel relay including replacement &U/S part as 20 KVA &30 KVA complete all as specified and directed. Note:- (a)Minor item / spares parts shall deemed to be included in the above & not to be paid separtely. (b) Replacement & minor U/S item with are covered under respective item & schedule will be measured & paid separately. |
| 38 | M /L for repair / servicing of existing special power supply system incuding dismantling electric connection and cleaning of realy junction point, connection & testing of SPS panel relay including replacement &U/S part of 3 KVA. complete all as specified and directed. Note:- (a) Minor item / spares parts shall deemed to be included in the above & not to be paid separtely. (b) Replacement & minor U/S item with are covered under respective item & schedule will be measured & paid separately |
| 39 | S &F in replacement of U/S of 3 phase DSP suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 40 | S & F in replacement of U/S of IGBT 300/1200 ISP socket suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 41 | S & F in replacement of U/S of IGBT Driver card suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 42 | S & F in replacement of 3 phase chager card suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 43 | S & F in replacement of 99/6 SCR Diode suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 44 | S & F in replacement of 20'' x4'' Display suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 45 | S &F in relacement of 200/1200 IGBT II out going suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 46 | S & F in replacement of IN PUT sensing PCB 3 phase suitable 20 KVA capacity UPS complete all as specified and directed. |
| 47 | S & F in replacement of out put sensing PCB 3 phase 20 KVA capacity UPS complete all as specified and directed. |
| 48 | S & F in replacement of HRC fuse with base 100 Amp soitable for 20 KVA capacity UPS complete all as specified and directed. |
| 49 | S &F in replacement of 20'' x 4'' Display Harness suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 50 | S &F in replacement of DC to ac power card suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 51 | S & F in replacement of main card suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 52 | S & F in replacement of Battery charging card suitable for 20 KVA capacity UPS complete all as specified and directed. |
| 53 | S & F in replacement of U/S 12 Volt , 42 Ah comeplete all as specified and directed. |
| 54 | S & F in replacement of 3 phase DSP suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 55 | S & F in replacement of U/S of IGBT 300/1200 ISP socket suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 56 | S & F in replacement of U/S of IGBT driver card suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 57 | S & F in replacement of 3 phase charger card suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 58 | S & F in replacement of 99/6 SCR Diode suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 59 | S & F in replacement of 20'' X 4'' Display suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 60 | S & F in replecement of 200/1200 IGBT II out going suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 61 | S & F in replacement of INPUT sensing PCB 3 phase suitable for 30 kva capacity UPS complete all as specified and directed. |
| 62 | S & F in replacement of out put sensing PCB 3 phase suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 63 | S & F in replacement of HRC fuse with base 100 Amp suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 64 | S & F in replacement of 20''x 4'' Display harness suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 65 | S & F inreplacement of DC to ac powercard suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 66 | S &F in replacement of main card suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 67 | S &F in replacement of Battery charging card suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 68 | S & F in replacement of 9'' Fan suitable for 30 KVA capacity UPS complete all as specified and directed. |
| 69 | S & F in replacement of U/S Battery 12 Volt 65 Ah complete all as specified and directed |
| 70 | S&F in repair of existing contactor capacitor duty type 3 pole AC of capacity having coil voltage 250 volt up to suitable for 20 KVAR along with 1 NO + 1 NC auxilary contact complete all as specified and directed. |
| 71 | S &F in repair of existing contactor capaciter duty type 3 pole AC of capacity having coil voltage 250 volt up to suitable 25 KVAR along with 1 no + 1nc auxilary contact complete all as specified and directed. |
| 72 | S &F in repair of 4 way selector sitch,63 Amp, 415 Volt,50 Hz complete suitable for 20/30 KVA UPS complete all as specified and directed. |
| 73 | S &F in repair of Battery lead for connection of batteries with two side suitable copper lux complete all as specified and directed. |
| 74 | S &F in replacement of potentiometer of capacity 2.5 K 1 Watt suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 75 | S &F in replacement of capacitor of 2200 mfd 450 Volt DC suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 76 | S &F in replacement of capacitor of 4 mfd 450 Volt AC suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 77 | S &F in replacement of capacitor of 0.1 mfd 1000 Volt AC suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 78 | S &F in replacement of capacitor of 330 mfd 450 Volt DC suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 79 | S &F in replacement of relay 12 Volt DC 1 C/O 10 Amp PRMT Relay 4 in parallel suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 80 | S &F in replacement of HRC fuse of capacity 32 Amp suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 81 | S &F in replacement of Mini Glass fuse of capacity 500 mA suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 82 | S &F in replacement of Fan 120 mm HBT suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 83 | S &F in replacement of Rectifier driver Card 8400-CH24B suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 84 | S &F in replacement of Rectifier Control Card 8400-CH26A suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 85 | S &F in replacement of Low Voltage DC-DC Card 8500-248 suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 86 | S &F in replacement of 2P Toneluck Switch suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 87 | S &F in replacement of IGBT Driver card 8500-179CX6 suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 88 | S &F in replacement of Device Over card 8500-250 Amp suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 89 | S &F in replacement of hooter PCB 8500-139 suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 90 | S &F in replacement of 3TF32 Contactor suitable for 3 KVA capacity SPS complete all as specified and directed. |
| 91 | M&L in replacement for Earthing complete with copper plate 60×60cm×3.15mm thick electrode and 20×3mm copper strip as earthing lead, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed. |
| 92 | M&L in replacement laying of 20X3 mm copper strip as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etccomplete all as specified and directed. |
| 93 | S&F in replacement tall tubular inverter battery of cap 12 Volts 200 Ah complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender