Tender For Addn/Altn And special Rep To Balconies Of A, B, C Block Qtrs At Vvra For Installation Of Upvc Frames/Windows .
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn And special Rep To Balconies Of A, B, C Block Qtrs At Vvra For Installation Of Upvc Frames/Windows .
BOQ
| Sl. No. | Item Description |
| 1 | M&L brick work with Flyash light weight bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. |
| 2 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 3 | M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. |
| 4 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. |
| 5 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 6 | M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified. |
| 7 | Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick Tinted/plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and including Dismantling/Cutting of existing windows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified. |
| 8 | Supply & fixing of UPVC windows fixedtype made out of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted float glass and including Dismantling/Cutting of existing windows any type and make good and match with existing walls at any hight complete all as directed by Engr-in-charge all as specified. |
| 9 | Providing and fixing factory made uPVC white colourcasement (Openable) Farme with Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Windowprofile with hollow section with mitlti chamber, frame 60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point.locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality tinted glass and Partical board. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender