Tender For Renovation To Setting Up And Commissioning Of Project Data Centre At Dgre Sector 37A Chandigarh
Tender Value
9.35 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
15 days left
EMD
18700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation To Setting Up And Commissioning Of Project Data Centre At Dgre Sector 37A Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Taking down existing old unsv copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 2 | Material and labour for Wiring for light point/ fan point/ exhaust fan point with 1.5 sq.mm FRLS insulated copper conductor single core cable in recessed (concealed) medium class suitable size conduit as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group C) Note: (i) The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, metal flush boxes, modular cover plate with frame, modular switches etc. and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. (ii) Fan regulator shall be measured and paid for separately under relevant item. |
| 3 | Supply and fixing for modular switch one way 6 Amp,1 module complete all as specified and directed. |
| 4 | Supply and fixing for modular socket, 6 amps-3 pin combined, 2 Module complete all as specified and directed. |
| 5 | Supply and fixing for modular switch , one way, 16 amps, one module complete all as specified and directed. |
| 6 | Supply and fixing for modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and directed. |
| 7 | Supply and fixing for DBOXx MCB protected socket , single phase, with MCB 20 Amps 'C' curve with sheet metal enclosure 4 module recessed/concealed in wall suitable for AC and other electrical connection complete all as specified and directed. |
| 8 | Supply and fixing for 3 module (100mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(For power socket and 5 A indp socket) complete all as specified and directed. |
| 9 | Supply and draw sub main wiring of two run with 2.5 sqmm PVC insulated and unsheathed FRLS copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC heavy duty conduit in concealed after cutting the chases of suitable size conduit as per actual site requirement in accordance with clause No 19.125 of SSR Part I, ISI marked including conduit and accessories like bends, tees, junction boxes etc fixed concealed with all accessories suitable for modular type fitment along with PVC insulated and unsheathed FRLS 2.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed by Engineer-in-Charge. Note: (i) The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit,and making good the disturbed surface is deemed to be included in overall rate quoted and nothing extra shall be paid for this. (ii) Two runs of single core cable with one run of earth continuity conductor including PVC conduit and accessories shall be measured and paid as one unit (RM) including making good disturbed surface complete all as specified and directed. |
| 10 | All as per serial Item No. 9 above but for 2x4.0 Sqmm+1x4.0 Sqmm earth wire -ditto-. |
| 11 | All as per serial item No. 9 above but for 2x10.0 Sqmm+1x10.0 Sqmm earth wire -ditto-. |
| 12 | All as per serial item No. 9 above but for 4x16.0 Sqmm+2x6.0 Sqmm earth wire ditto-. |
| 13 | Supply and fixing in repairs Ceiling rose surface type, PVC/Polycarbonate islated body size 50x28 mm two to three terminals complete all as specified and directed. |
| 14 | Supply and fixing for surface/wall mounted LED light fitting four feet long 20 watt with decorative end caps, rated voltage 220-240 volts, 50 Hz, Input voltage range 120 -265 Volt, IP 20 with system efficacy 100 lm/W, PF≥ 0.9, surge protection upto 2 kV, alumunium housing and connecting to ceiling rose with flexible conductor cable with suitable size complete all as specified and directed. |
| 15 | Supply and fixing for air circulating fan 230 volts ,single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed. |
| 16 | Supply and fixing for exhaust fan 230 volts ,single phase 450 mm sweep complete all as specified and directed. |
| 17 | Supply and fixing for sheet metal enclouser distribution board 415 volt, Vertical TPN 4 Way (MCCB+12 modules) with provision for suitable MCCB FP/TP up to 125 A as incomer & MCB/TPN as out going as per IS including compact insulated bus bar and rounded neutral bar, earthing complete double door reccess mounting IP-43 protection, , including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc complete all as specified and directed.Note - MCCB & MCBs/TPN shall be measured separately. |
| 18 | Supply and fixing for sheet metal enclosure MCB distribution board TPN 415 volts 04 way with IP-43 double door complete with 200 Amps rated bus bar and neutral link with provision for MCB TPN as incomer and MCBs/TPN as outgoing switchgears, fixed flush in wall including chases cutting in wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.Note - MCBs shall be measured separately. |
| 19 | Supply and fixing for sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 double door complete with 200 Amps rated bus bar, earth link and neutral link with provision for fixing incomer and outgoing MCBs as outgoing switchgears, fixed flush in wall including chases cutting in wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. Note - MCBs shall be measured separately. |
| 20 | Supply and fixing for MCB SP 6 to 32 Amps 240 volts 10 KA ''C''series complete all as specified and directed. |
| 21 | Supply and fixing for MCB SPN 40 to 63 Amps 240 volts 10 KA ''C'' series complete all as specified and directed. |
| 22 | Supply and fixing for MCB TPN ,40 to 100 Amps 415 volts 10 KA ''B'' Series complete all as specified and directed. |
| 23 | Supply and fixing in repairs MCCB, 4-pole, adjustable breaking capacity 36 KA, 415 volts, 125 Amps including taking down unservicable one complete all as specified and directed. |
| 24 | Supply and fixing for rigid non-metallic PVC conduit 25 mm dia concealed in wall exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bellmouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipehooks etc. Note: The rate of cutting chases required for concealing the PVC conduits alongwith the fittings / fixtures like elbow, bends , conduit, etc. and making good the disturbed surface shall deemed to be included in overall rate quoted and nothing extra shall be paid for this complete all as specified and directed. |
| 25 | Supply and fixing for telephone sockets RJ 11 (4 wire) modular type 01 module suitable for telephone cable incl Jack, Gang box, face plate complete set all as specified and directed. |
| 26 | Supply and fixing for LAN sockets RJ 45 Cat 6 Modular type 01 Module suitable for LAN cable incl Jack, Gang box, face plate complete set all as specified and directed. |
| 27 | Supply and fixing for modular blanking plate, 1 module complete all as specified and directed. |
| 28 | Supplying, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core(panel to VTPN) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 29 | Supplying, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core(panel to VTPN) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender