Tender For Repair / Replacement Of Internal Wiring, Socket, Switches Etc And Other Allied Works At Technical Area Under Ge (Af) Srinagar
Tender Value
25 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
13 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Internal Wiring, Socket, Switches Etc And Other Allied Works At Technical Area Under Ge (Af) Srinagar
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of unserviceable light point, Fan point, socket point 5A / 15A, switches, sockets or regulator, light fixtures any type any type MCBs, replacement of connected wire from ceiling rose to fitting etc in day to day / door to door maintenance and making it serviceable in all respect with provision of adhesive tape and screws & washers etc. Work shall also include to check & removal of breakages in service connection / sub main of houses as and when directed, complete all as specified and directed. (All items such as switch / socket / switch socket combination / light fitting / regulator / MCBs, connection wire etc required to be replaced for this job will be measured seperately and paid under ser Item No 2.00 to 47.00 as supply only.)Note : (a) Contractors representative / electrician will report to JE E/M / Engr-in-charge daily at forenoon and afternoon to collect routine / urgent works related to internal electric supply till completion of contract. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job including every type of requisite T&P items to his trades man. All routine / urgent jobs received on job slip will be repaired & got signature of user's and will be deposited to JE E/M with in 24hrs. In case of any delay in attending the complaint more than 8 hrs after handing over of routine and 2 hrs for urgent works, the contractor shall be liable to pay the penalty as described in penalty clause given here as under. |
| 2 | Note : (a) Contractors representative/engineer will report to JE E/M/Engr-in-charge daily at forenoon and afternoon to collect routine/urgent works related to internal electric supply till completion of contract. The contractor will ensure availability of manpower equipped with all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job including every type of requisite T&P items to his trades man. All routine/urgent jobs received on job slip will be repaired & got signature of user's and will be deposited to JE E/M with in 24hrs. In case of any delay in attending the complaint more than 8 hrs after handing over of routine and 2 hrs for urgent works, the contractor shall be liable to pay the penalty as described in penalty clause given here as under.(b) The penalty shall be applicable to the contractor if the delay is noticed by the EIC more than 12 hrs after handing over works of urgent nature to the contractor. The Engr-In-Charge / JE E/M shall handover the slip containing specification of work to the contractor. The contractor shall attend the job immediately and report to Engr-In-Charge within 12hrs. The contractor will keep his tradesmen in stand by for attending any routine / urgent works from the executive. If the nature of job is such that the work cannot be completed within period of 12 hrs then the facts shall be brought to the notice of the GE / Engr-in-charge |
| 3 | and the period for the working to the complaint shall be decided by the GE / EIC. If the delay is more then twelve hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 50.00 (Rs fifty only) per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 56 of IAFW –2249 and shall be treated as interim condition of the contract and shall enforceable as and delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. The decision of the Accepting Officer is this regard shall be final and binding.(c) One Complaints slip to be treated as One Complaint irrespective of No. of Repairs mentioned in the same.(d) Contractor to keep his Electrician ready for Urgent Complaints, During odd hours (0600 Hrs to 0900 Hrs and 1700 Hrs to 2200 Hrs) Other than the Regular complaints during working Hrs (0900 Hrs to 1700 Hrs) (e) Procurement of Security gate passes of the Electrician , will be sole responsibility of the Contractor.(f) If the work is repeated due to poor workmanship, he will be liable to repair the same without any extra expenditure to the govt. |
| 4 | Supply only Switch piano flush type SP, one way 5 Amps / 6 Amps 230 Volt. |
| 5 | Supply only Switch piano flush type SP, one way 15 Amps / 16 Amps, 230 Volt. |
| 6 | Supply only Switch socket combination 2 in1, 5 Amps, flush type, 230 Volt. |
| 7 | Supply only Switch socket combination 2 in1, 5 Amps / 15 Amps, flush type, 230 Volt. |
| 8 | Supply only Socket outlet 2 in 1, 5 pin, 5 Amps |
| 9 | Supply only Socket outlet, 2-in-1, 5 pin, 5 and 15 Amps flush |
| 10 | Supply only Switch piano flush type SP, two way 5 Amps 230 Volt. |
| 11 | Suppy only bed Switch 5 Apms, 230 volts |
| 12 | Supply only Angle lamp holder Polycarbonate with back plate. |
| 13 | Supply only Bell push 230 volts, AC |
| 14 | Supply only Call bell ding-dong 230 volts. |
| 15 | Supply only Switch modular type, 1 module, 6 Amps one way. |
| 16 | Supply only Switch modular type, 1 module, 16 Amps one way. |
| 17 | Supply only Socket outlet modular type, 2 module, 3 pin, 6 Amps. |
| 18 | Supply only Socket outlet, modular type, 2 module, 2-in-1, 6 / 16 Amps combined. |
| 19 | Supply only Two way switch modular type, 1 module, 6 Amps. |
| 20 | Supply only Bell push with indicator modular type, 1 module, 6A. |
| 21 | Supply only Fan regulator modular type, 2 module, step type,120 watts. |
| 22 | Supply only switch socket combination 5 Amps, 5 pin multipurpose with PVC Box, 4 holes. |
| 23 | Supply only switch socket combination 15 Amps, 5 pin multipurpose with PVC Box, 4 Holes. |
| 24 | Supply only LED tube light fitting Garnet 18W / 20W Batten LED (Warm white / white), Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one. |
| 25 | Supply only LED tube light fitting Garnet 10W Batten LED (Warm white/ white), Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one. |
| 26 | Supply only LED 10 watt Bulk Head Light energy saving with IP65 with opal diffuser , pressure die cast aluminium housing and making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as per the directions of Engg-in - Charge. |
| 27 | Supply only plugtop 6 Amp, 230V, 50Hz |
| 28 | Supply only plugtop 16 Amp, 230V, 50Hz |
| 29 | Supply only PVC box two holes best quality (ISI marked) for use MCB SPN. |
| 30 | Suypply only 10 Watt LED Bulb capacity, warn white, model No B-22 / E-27. |
| 31 | Supply only LED Bulb capacity 10 Watt, white, model No B-22 / E-27. |
| 32 | Supply only LED Bulb capacity 10 Watt, warm white, thread type insertion. |
| 33 | Supply only LED Bulb capacity 10 Watt, white, thread type insertion. |
| 34 | Supply only MCB Single Pole, 230 Volt, 'C' Series, raiting 6 to 32 Amp. |
| 35 | Supply only MCB Single Pole and Neutral , 230 Volt, 'C' series, rating 40 Amp. |
| 36 | Supply only MCB Single Pole and Neutral , 230 Volt, 'C' series, rating 63 Amp. |
| 37 | Supply only MCB Three Pole and Neutral, 230 Volt, rating 63 A. |
| 38 | Supply only insulation tape roll of high quality . |
| 39 | Supply only Modular plate 1 module |
| 40 | Supply only Modular plate 2 module |
| 41 | Supply only Modular plate 3 module |
| 42 | Supply only Modular plate 4 module |
| 43 | Supply only Modular plate 6 module |
| 44 | Supply only Modular plate 8 module |
| 45 | Supply only Modular plate 12 module |
| 46 | Supply only PVC flexible copper cable twisted two core wire of size 1.5 sqmm. |
| 47 | Supply only PVC flexible copper cable twisted two core wire of size 2.5 sqmm. |
| 48 | Supply Driver for 2'x2' LED Panel with all necessary fixing arrangement. |
| 49 | Supply only PVC casing caping of size 20 / 25mm including all accessories i.e nail, tee, elbow etc. |
| 50 | Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed. |
| 51 | M&L for Point wiring for one light point controlled by one switch with 1.5 Sqmm PVC insulated FRLHS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC Conduit / Casing caping ( ISI marked ) and 1.25 mm thick mild steel terminal boxes (Modular Type) concealed in walls for fixing of modular switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLHS 1.5 Sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification, complete all as specified and directed. |
| 52 | All as per Ser item No 49.00 here in above but for fan / exhaust fan point controlled by one switch 6 amps 240 volts. |
| 53 | All as per Ser item No 49.00 here in above but for one bell point controlled by one bell push switch 6 amps 240 volts. |
| 54 | All as per Ser item No 49.00 here in above but for one light point control by two nos two way switches on independent Board. |
| 55 | All as per Ser item No 49.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on same Board. |
| 56 | All as per Ser item No 49.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on independent Board. |
| 57 | All as per Ser item No 49.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 Amps power point. |
| 58 | M&L for concealed Point wiring for one light point controlled by one switch with 1.5 sqmm PVC insulated FRLHS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC conduit for Concealed wiring ( ISI marked ) and 1.25 mm thick mild steel terminal boxes (Modular Type) concealed in walls for fixing of modular switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLHS 1.5 Sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification, complete all as specified and directed. |
| 59 | All as per Ser item No 56.00 here in above but for fan / exhaust fan point controlled by one switch 6 amps 240 volts. |
| 60 | All as per Ser item No 56.00 here in above but for one bell point controlled by one bell push switch 6 amps 240 volts. |
| 61 | All as per Ser item No 56.00 here in above but for one light point control by two nos two way switches on independent Board. |
| 62 | All as per Ser item No 56.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on same Board. |
| 63 | All as per Ser item No 56.00 here in above but 3 pin 6 Amps socket outlet point controlled by one switch on independent Board. |
| 64 | All as per Ser item No 56.00 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 Amps power point. |
| 65 | S&F Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. |
| 66 | S&F Modular switch 1 way, 16 Amp, 240 volts ,1 Module, complete all as specified and directed. |
| 67 | S&F Modular switch 2 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed. |
| 68 | S&F modular Socket 6 Amp, 230 volts, 5 Pin universal, 2 Module, complete all as specified and directed. |
| 69 | S&F Modular socket 6/16 Amp, 250 volts, 2 Module, complete all as specified and directed. |
| 70 | S&F modular bell push switch with indicator 6 Amp 240 volte, 1 Module, complete all as specified and directed. |
| 71 | S&F bell electric AC,230V, single phase ,ding dong type, complete all as specified and directed |
| 72 | S&F modular step type fan regulator suitable for 120 watt 250 volts, 2 Module, complete all as specified and directed. |
| 73 | S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed. |
| 74 | S&F in repairs 18/20 Watt (White/warm white) LED baton fitting 4 feet length including drivers having energy consumption, 230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. |
| 75 | S&F in repairs 10/11 Watt (White/warm white) LED baton fitting 2 feet length including drivers having energy consumption, 230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as specified and directed. |
| 76 | S&F in repairs LED 10 Watt bulkhead light energy saving with IP65 with opal diffuser, pressure die cast aluminium housing and making all connection with suitable size flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 77 | S&F in repais LED 36 Watt panel light 2'x2', extruded aluminium housing with milky diffuser recess mounting ultra modern desinged architectural LED luminaire which provides soft light and glare free symmetrical illumination suitable for armstron / grid ceiling including driver 36 Watt capacity complete making all connection with suitable size flexible cable from ceiling rose to fitting, complete all as specified and directed. |
| 78 | S&F in repairs 25 Watt LED street light fitting, system efficiency not less than 110 lumen / watt, IP-66 protection, consisting of high / low voltage cut off, maintenance free isolated electronic driver circuits, Low THD, PMMA grade high quality transmittance lens, epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp and driver compartment, fitted in cast aluminium housing with SS screws fixed on existing bracket and connecting, complete all as specified and directed. |
| 79 | S&F in repairs LED 15 Watt recess mounting fitting round type, housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting, complete all as specified and directed. |
| 80 | S&F in repairs LED 15 Watt recess mounting fitting square type, housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting, complete all as specified and directed. |
| 81 | S&F of Exhaust fan, made of sturdy Engineering steel body, complete with louvers shutter, 300mm sweep, voltage 230V, 50 Hz, RPM 1200, copper winding, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangment and making good to disturbed surfaces including taking down old unserviceable exhaust fans after disconnecting the wire from ceiling rose and deposited to store yard of AGE E/M, complete all as specified and directed . |
| 82 | S&F in repairs metal clad plug & socket board single pole and neutral enclosure with 3 pin and earth plugs and socket complete with one single pole 20 Amps MCB, 415 Volts, C type, complete all as specified and directed. |
| 83 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 6 sqmm copper cable & 1 run of 6 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 84 | Sub main wiring with two runs of single core PVC insulated multistranded un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistranded unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green volour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note :2 runs of 4 sqmm copper cable & 1 run of 4 sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit. |
| 85 | S&F in replacement 1.5 Sqmm PVC insulated FRLSH unsheathed copper conductor single core multi stranded flexible copper cable, 1100V grade, complete all as specified and directed. |
| 86 | S&F in replacement 2.5 Sqmm PVC insulated FRLSH unsheathed copper conductor single core multi stranded flexible copper cable, 1100V grade, complete all as specified and directed. |
| 87 | S&F in replacement 4 Sqmm PVC insulated FRLSH unsheathed copper conductor single core multi stranded flexible copper cable, 1100V grade, complete all as specified and directed. |
| 88 | S&F in repairs sheet metal enclosure MCB distribution board single pole & neutral, 240 volts, 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 89 | S&F in repairs sheet metal enclosure MCB distribution board single pole & neutral, 240 volts, 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 90 | S&F in repairs sheet metal enclosure MCB distribution board single pole & neutral, 240 volts, 04 way with IP-43 IK-09 protection double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 91 | S&F in repairs sheet metal enclosure distribution board, double door type, as per IEC 61439-3 (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed. |
| 92 | S&F in repairs MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'C' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 93 | S&F in repairs MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40 Amps 10 KA breaking capacity etc all as specified and directed. |
| 94 | S&F in repairs MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed. |
| 95 | S&F in repairs MCB triple pole and neutral ISI marked, C series, working on 415 volts 50HZ AC supply for incoming and outgoing controlling system capacity 63 Amps, 10 KA breaking capacity, complete all as specified and directed. |
| 96 | M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm gradedcrushed stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe including taking down old one, complete all as specified and directed.Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. |
| 97 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 59,870.00 during AOC. (Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender