Tender For Repair / Maintenance Of Street Light, Security Light, Perimeter Security Lights And Connected Works In Tech Area Under Ge (Af) Palam, Delhi Cantt - 10
Tender Value
21 Lakhs
Estimated cost
Bid Submission
18 Aug 2026
2 days left
EMD
42000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Street Light, Security Light, Perimeter Security Lights And Connected Works In Tech Area Under Ge (Af) Palam, Delhi Cantt - 10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Jul-2026 | CORRIGENDUM NO 1 | BOQ | 11-Aug-2026 |
| 2 | 11-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed. |
| 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid, tested complete all as specified and as directed. |
| 3 | Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed. |
| 4 | M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable ie total 23 cm) complete all as specified and as directed. Note:- Only punned thickness shall be measured and paid. |
| 5 | M&L for brick laid in trenches for cable protection of burnt clay sub class ‘B’ complete laid dry flat complete all as specified and as directed. |
| 6 | Taking out old unserviceable LT under ground cable any type from trenches, pipes & poles complete all as specified and as directed. |
| 7 | Supply and laying in replacement of XLPE LT 1100 Volt Grade, armoured under ground cable of size 10 Sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc complele all as specified and as directed. |
| 8 | Description all as per srl item No 7.00 above but 16 Sqmm 2 core complele all as specified and as directed. |
| 9 | Description all as per srl item No 7.00 above but 16 Sqmm 4 core complele all as specified and as directed. |
| 10 | Description all as per srl item No 7.00 above but 25 Sqmm 4 core complele all as specified and as directed. |
| 11 | Description all as per srl item No 7.00 above but 35 Sqmm 3.5 core complele all as specified and as directed. |
| 12 | Description all as per srl item No 7.00 above but 50 Sqmm 3.5 core complele all as specified and as directed. |
| 13 | Description all as per srl item No 7.00 above but 70 Sqmm 3.5 core complele all as specified and as directed. otes for ser item No. 7.00 to 13.00:- Excavation, earth work and protection of cable shall be measured and paid seperately. |
| 14 | Supply & jointing heat shrinkable straight through joint kit suitable for LT 1100 Volt grade XLPE cable of size 400/500 Sqmm 3.5 core complete with treating of cable to make ready for jointing etc complete all as specified and as directed. |
| 15 | Description all as per item No. 14.00 here in before but suitable for cable size 240-300 sq mm complete all as specified and as directed. |
| 16 | Description all as per item No. 14.00 here in before but suitable for cable size 150-185 sq mm complete all as specified and as directed. |
| 17 | Description all as per item No. 14.00 here in before but suitable for cable size 70-120 sq mm complete all as specified and as directed. |
| 18 | Description all as per Srl item No. 14.00 here in before but suitable for cable size 25-50 sq mm complete all as specified and as directed. |
| 19 | M&L for galvanised steel tube, light grade with all fitting complete laid in trenches/ road / Path/ on pole of 80 mm bore complete all as specified and as directed. |
| 20 | Description all as per srl item No 19.00 above but GI pipe of 100mm bore complete all as specified and directed. |
| 21 | Description all as per srl item No 19.00 above but GI pipe of 150mm bore complete all as specified and directed. |
| 22 | Description all as per srl item No 19.00 above but GI pipe of 50mm bore complete all as specified and directed. |
| 23 | Description all as per srl item No 19.00 above but GI pipe of 40mm bore complete all as specified and directed. |
| 24 | Dismantling concrete poles/steel tubular poles,struts of any size complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (09 Mtr long) with and including two coats of bituminous paint internally and externally for the portion embedded in concrete and two coats of aluminium paint over one coat of red oxide primer to external/exposed surfaces complete all as specified and as directed. Note:- Excavation, earth work and PCC shall be measured and paid separately under relevant items. |
| 26 | M&L in replacement of lugs/thimbles at termination of LT cable by cutting the end portion and removing insulation and fixing new aluminium lugs /thimble properly with crimbing tool of size 185 -400 sqmm complete all as specified and as directed by Engr-in-Charge. |
| 27 | Description all as per srl item No. 26.00 here in before but for cable size 50-150 sqmm complete all as specified and directed by Engr-in-Charge. |
| 28 | Description all as per srl item No. 26.00 here in before but for cable size upto 35 sq mm complete all as specified and directed by Engr-in-Charge. |
| 29 | Cutting and trimming of tree branches to clear street light lines in the area of the street light sorrounding area (including repairing and jointing of street light connection damaged during cutting of tree) and removal of the trimmed branches of trees and depositing the same in MCD waste bins inside the campus complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for preparing existing old surface of steel tubular poles including cross arms and clamp of any type 09 Mtr long and painting one coat of aluminium paint on the surface of steel tubular pole, with white /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia yellow paint complete all as specified and as directed. |
| 31 | M&L for painting to PCC pole with cross arms and clamp of any type and any size with a coat of synthetic enamel paint with white /blue 30 cm wide strip upto the height of 1.5 mtr above ground level and marking the pole No in 4” dia yellow paint circle complete all as specified and as directed. |
| 32 | M&L for augering of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 15 Mtrs long with and including laying HDPE pipe of 150mm dia complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for defect rectification LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc. including and additional excavation in normal alluvial strata required for exposing the cable fault, removal of deteriorated portion of cable treating of cable and keeping the same ready for jointing work for cable of size up to 400 Sqmm 3.5 core. The fault locating equipments shall be brought to site within the hours of instructions from Engr-in-Charge |
| 34 | M&L for Earthing complete with galvanized steel earth plate electrode (60cm x 60cm)mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I of 2009 and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-1 with 40 mm thick RCC (1:2:4) type B-1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundtion of PCC poles/struts complete all as specified and as directed. |
| 36 | M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundtion of pole/stay assembly etc including necessary use and waste of form work complete all as specified and as directed. |
| 37 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/coping around poles, including necessary use and waste of form work, finishing surface even and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L in replacement Junction box outdoor type, 3 phase 415 Volts of size (350x250x150)mm made out of hot press moulded SMC front openable hinged type including 4 Nos. Al bus bars mounted on insulators heavy duty of rating 32 Amps with necessary fixing arrangements to pole with MS calmps, nuts, bolts etc of size (25 x 4) mm duly painted with two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 39 | Taking down unserviceable Perimeter/street/security light fitting complete (LED) from the pole/tower/bldg etc for repair, replacement and re-fixing the same back to its original position after made the fitting serviceable including replacement of LED strip and driver of suitable DC voltage / miliamper (mA) current output or replacement of new fittings complete all as specified and as directed by Engr-in-Charge. Note :- S& F of Spares like LED driver etc required for making the fittings serviceable shall be measured and paid separately under relevant items of the schedule. |
| 40 | Supply and fixing in replacement of LED street light fitting 60 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top maintainable type, IP66 complete all as specified and directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton |
| 41 | Supply and fixing in replacement of LED street light fitting 90 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top maintainable type, IP66 complete all as specified and directed by Engr-in-Charge. Make:-Halonix cat Pt No. HLSLD-10-90-CWL-I or equivalent in Havells/Crompton |
| 42 | Supply and fixing in replacement of LED street light fitting 120 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top maintainable type, IP66 complete all as specified and directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton |
| 43 | Supply and fixing in replacement of LED street light fitting 45 watt consist of a high efficent LED street light made of aluminium die cast aluminium housing with lens, toughened glass top maintainable type, IP66 complete all as specified and directed by Engr-in-Charge. Make:- Wipro/ Havells/Crompton |
| 44 | Taking down unserviceable light fittings from High Mast Lighting Systems by lowering the mast through the existing winch and motor arrangement, including inspection, testing and identification of defective components such as LED drivers, LED strips, control gear assemblies and other associated accessories. Carrying out necessary repairs to make the fitting serviceable, refixing the light fitting at its original position, raising the mast back to its normal operating position and testing the complete installation to ensure satisfactory performance and serviceability, replacement of defective LED drivers, if required, shall be measured and paid for separately under the relevant items. complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | S&F in replacement of electronic driver suitable for LED light any type upto 150 watt complete all as specified and as directed. |
| 46 | S&F in replacement of electronic driver suitable for LED light any type 200 to 250 watt complete all as specified and as directed. |
| 47 | S&F in replacement of electronic driver suitable for LED light any type 300 to 400 watt complete all as specified and as directed. |
| 48 | S&F in replacement of highly efficient LED flood light fitting 400 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable complete in all respects as specified and directed. |
| 49 | S&F in replacement of highly efficient LED flood light fitting 300 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 50 | S&F in replacement of highly efficient LED flood light fitting 250 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 51 | S&F in replacement of highly efficient LED flood light fitting 200 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 52 | S&F in replacement of highly efficient LED flood light fitting 180 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 53 | S&F in replacement of highly efficient LED flood light fitting 150 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 54 | S&F in replacement of highly efficient LED flood light fitting 120 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 55 | S&F in replacement of highly efficient LED flood light fitting 100 watt, Warm White/Natural White, with integrated lens/optics, housing made of pressure die-cast aluminium with an extruded aluminium heat sink, enclosed with shatterproof toughened glass, IP-66 rated, internally prewired including an electronic driver, and connecting up with a three-core flexible copper conductor 1.5 sq.mm cable, complete in all respects as specified and directed. |
| 56 | S&F in replacement of traffic light LED type red/green/white/Blue/Orange, 24 hrs operation 300 mm round light source, visibility> 500 mtrs, operating voltage 230 Volt AC complete with polycarbonate enclosure and clear diffuser complete all as specified and as directed. |
| 57 | S&F in replacement LED Aviation 6 W Obstruction Light with yellow painted die cast aluminium alloy housing with polycarbonate enclosure complete all as specified and as directed. |
| 58 | Supply and fixing of Ruby clear post top 25W LED, 5700K New generation energy saving & environmental friendly, long life versatile aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs light source IP 65 complete all as specified and directed. |
| 59 | S&F LED bollard with MS pipe housing with glare free PMMA diffuser, IP 65, 10W complete all as specified and as directed. Make-Halonix/Bajaj/Havells or equivalent make. |
| 60 | Supply and fixing in replacement of Outdoor Lighting Control Panel of size 600 mm (H) × 500 mm (W) × 250 mm (D) or suitable size as required to accommodate all components, , weatherproof and IP-65 protected, fabricated from 14 SWG MS sheet steel with sloping rain canopy, double-sided hinged doors with heavy-duty locking arrangement, and bottom gland plate complete with cable glands for incoming and outgoing cables. The panel shall be equipped with 01 No. 40A, TP MCCB (16kA) with adjustable thermal and fixed magnetic release, 01 No. 40A TP power contactor, 01 No. 6-10A SP MCB for control circuit protection and 01 No. electronic programmable timer, complete with internal wiring, terminations, installation, testing and commissioning, all as specified and as directed by the Engineer-in-Charge. |
| 61 | S&F in repalacement of street light bracket made out of 20/25/40 mm dia light grade GI pipe bend to shape 1.2 m long suitable for light fittingwith 02 Nos clamp made out of (25 x 4)mm GI strip including drilling holes bending welding and made to clamps on building/concrete/Rail/Tubular pole complete all as specified and as directed. |
| 62 | M&L in replacement of PVC insulated service cable flat or round, sheathed, aluminium, multistranded conductor 1100V grade size 10 sqmm 2 core complete all as specified and as directed. |
| 63 | S&F in replacement of analog type time switch 3P module, DIN 24 hours programmable every 30 minutes of current capacity 16 Amps with one change over including connecting to existing power contactor complete all as specified and as directed. Make :- Havells/ IndoAsian/HPL |
| 64 | S&F in replacement of digital type time switch 3P module, DIN 24 hours programmable every 1 minutes with 28 memory location of current capacity 16 Amps with one change over including connecting to existing power contactor complete all as specified and as directed. Make:-Havells/ IndoAsian/ L&T |
| 65 | Supply and fixing in replacement of Power contactor 40 A, 4 pole of timer panel complete all as specified and as directed. Make:- HPL/ L&T/ Havells |
| 66 | Material and labour in replacement of three core 2.5 sqmm copper conductor cable for connecting up street/ secuirity light with pole junction box complete all as specified and as directed. |
| 67 | S&F in replacement of IP65 Heavy-Duty Tricolor LED Rope Light complete all as specified and directed by Engr-in-charge. Make:- HPL/ Indo asian/ L&T |
| 68 | Supply only 1.5 sqmm single-core multistrand copper conductor cable, Red/Yello/Blue/green/black, as required, FRLSH (Flame Retardant Low Smoke Halogen) insulated, 1100V grade, complete all as specified and directed. |
| 69 | Supply only 2.5 sqmm single-core multistrand copper conductor cable, Red/Yello/Blue/green/black, as required, FRLSH (Flame Retardant Low Smoke Halogen) insulated, 1100V grade, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender