Tender For Petty Repair And Maintenance Day To Day B/R Wks For Joinery Items, Flooring, Walls, Plumbing System, Sanitary Items, Tiling, Roof Repair And Other Allied Works At Dundahera Mil Stn, Manesar C , Indubinola, 227 Fd Wksp, 35 Inf Bde Sig Coy &
Tender Value
30 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair And Maintenance Day To Day B/R Wks For Joinery Items, Flooring, Walls, Plumbing System, Sanitary Items, Tiling, Roof Repair And Other Allied Works At Dundahera Mil Stn, Manesar C , Indubinola, 227 Fd Wksp, 35 Inf Bde Sig Coy & 35 Inf Bde C At Shankar Vihar Under Age B/R-Ii Of Ge (South) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) (in patches also) (area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete including dismantlling of existing floor tiles complete all as specified and as directed. |
| 2 | M&L for joint free glazed ceramic coloured tiles 7 to 8 mm in vertical surface, area of each tiles exc n.exc 0.72 Sqm (in patches also) set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat/ plaster 10 mm thick on fair faces of brick work in CM 1:4 surfaces to receive tiles including dismantlling of existing wall tiles complete all as specified and as directed. |
| 3 | M&L for Vitrified Ceramic tiles double charged (light shade), 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantlling of existing floor tiles complete all as specified and as directed. |
| 4 | M&L for vitrified ceramic tiles double charged (light shade) 9-10 mm thick (Square/ rectangular) area of each tile not exceeding 0.72 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles including dismantlling of existing skirting tiles complete all as specified and as directed. |
| 5 | S&F 20 mm bore (outer dia) CPVC pipes SDR 11 & plain CPVC SCH-40 fitting on walls / ceiling or laying in floors/wall including all fitting such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor including taking down of existing GI tubing 15mm dia and connection complete all as specified and as directed. |
| 6 | S&F of 25 mm bore (outer dia) CPVC pipes SDR 11 & plain CPVC SCH-40 fitting on walls / ceiling or laying in floors/wall including all fitting such as (brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor including taking down of existing GI tubing 20mm dia and connection complete all as specified and as directed. |
| 7 | S&F in repairs 25mm bore PTMT ball valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 25mm bore and fixed complete all as specified and as directed. |
| 8 | S&F in repairs PVC connections 600mm long with brass unions at both ends suitable for 15mm bore pipe complete all as specified and as directed. |
| 9 | S&F in repairs waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 10 | S&F PVC waste pipe 32/40 For WHB and sink complete all as specified and as directed. |
| 11 | S&F in repairs 15 mm angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles, screwed with iron pipes or for union complete all as specified and as directed. |
| 12 | S&F in repairs bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed. |
| 13 | S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and as directed. |
| 14 | S&F in repairs mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed. |
| 15 | S&F in repairs mixing valve for wall 15 mm dia, CP brass fancy including joints to steel pipe or unions, including fittings complete all as specified and as directed. |
| 16 | S&F in repairs,sink mixer for mixing valve 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings complete all as specified and as directed. |
| 17 | S&F in repairs chromium plated grating with 100mm dia of approved make including fixing with 1:4 CM to floor/ nahni trap etc complete all as specified and as directed. |
| 18 | S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed. |
| 19 | S&F chromium plated ABS body health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed. |
| 20 | S&F in repairs 15 mm size brass chromium plated Two way bib cock fancy type cast copper alloy complete all as specified and as directed. |
| 21 | S&F in reapairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 22 | S&F in repairs stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 23 | S&F in repairs stainless steel sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of steel having minimum section 45mmx 45mm x 5mm section and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 24 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as specified and as directed. |
| 25 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 26 | S&F in repairs PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed. |
| 27 | S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 28 | S&F in repairs Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes complete all as specified and as directed. |
| 29 | S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows complete all as specified and as directed. |
| 30 | M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm complete all as specified and as directed. |
| 31 | S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 920mm x 760mm x 250mm complete all as specified and as directed. |
| 32 | S&F in repairs aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 33 | S&F in repairs MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed. |
| 34 | S&F in repairs extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and as directed. |
| 35 | S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed. |
| 36 | S&F 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square including hacking out old brockn glass (any thickness, any size or at any height) complete all as specified and as directed. |
| 37 | S&F 5.5mm thick sheet glass ordinary quality exc 0.50 sqm each pane and fixed with oil putty or with wooden/aluminum/rubber beading in square including hacking out old brockn glass (any thickness, any size or at any height) complete all as specified and as directed. |
| 38 | S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as specified and as directed. |
| 39 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as specified and as directed. |
| 40 | S&F in repair looking mirror fancy type bevelled edges of selected quality glass 5.5mm thick, mounted on wall with SS fancy type mirror button arrangement etc complete all as specified and as directed. |
| 41 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP complete all as specified and as directed. |
| 42 | S&F PVC handle for low level flushing cistern of any capacity complete all as specified and as directed. |
| 43 | S&F in repair Flushing kit complete (containing handle, float valve, syphon washer, PVC nut etc complete set) for low level flushing cistern complete all as specified and as directed. |
| 44 | S&F in repair PVC washer for syphon i.e. of low level flushing cistern of any capacity 15 mm bore complete all as specified and as directed. |
| 45 | M&L for 15mm thick rendering with ready mix plaster (in patches) on brick or concrete surfaces finished even and smooth without using extra cement, levelling the surface, curing etc including taking down existing ceiling plaster complete all as specified and as directed.Note : Rate is included for necessary scaffolding etc required for plastering. |
| 46 | M&L for 5mm thick rendering with ready mix plaster (in patches) on concrete surfaces of ceiling finished even and smooth without using extra cement, levelling the surface, curing etc including taking down existing ceiling plaster complete all as specified and as directed.Note : Rate is included for necessary scaffolding etc required for plastering. |
| 47 | M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coats of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed. |
| 48 | M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coats of weather proof paint over existing prepared putty base surface complete all as specified and as directed. |
| 49 | M&L for preparation of newly plastered surfaces of ceiling and applying 1 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying one coat of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed. |
| 50 | S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling including acoustic gypsum perforated board 10 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid including dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 51 | S&F rotational moulded polythylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule of size 25 mm bore including dismantling of water tanks of any type/pattern not exc 1000 ltr and removing from site of work complete all as specified and as directed. |
| 52 | S&F rotational moulded polythylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule of size 20 mm bore including dismantling of water tanks of any type/pattern not exc 2000 ltr and removing from site of work complete all as specified and as directed. |
| 53 | S&F in repairs 20 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 54 | S&F in repairs 25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 55 | M&L powder coated aluminum anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminum handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/ fixture/ aluminum snap beads, complete all as specified and as directed.Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 56 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & 4 mm thick selected quality frosted and plain glass including necessary fittings/ fixture/ aluminum snap beads, complete all as specified and as directed. |
| 57 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples including necessary fittings/fixture /aluminum snap beads, complete all as specified and as directed. |
| 58 | M&L for Udaipur green marble work 16 to 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in CM 1:6 and making good surface of window cills & jambs complete all as specified and directed. |
| 59 | S&F stainless steel 25 mm dia with wall thickness of 1.25mm AISI 304 of approved quality curtain rod with two numbers stainless stell brackets/hook (either wall to wall or else) as per approved quality and diesign (for each 01 mtr of rod) fixed in brick/concrete wall and same finished knobs on each end of each piece of curtain rod complete all as specified and as directed. |
| 60 | Dismantling wrought iron or mild steel/ cast iron work of any description, complete all as specified and as directed. |
| 61 | S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 62 | S&F fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces including taking down existing aluminium door of any size complete all as specified and as directed. Note : The rate quoted by the tenderer including the Cost of sheet glass Plain/frosted/particle board. |
| 63 | Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and as directed. |
| 64 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed. |
| 65 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and as directed. |
| 66 | S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and as directed. |
| 67 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, S&Fing & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 68 | S&F 35 mm thick Factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 69 | S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and as directed. |
| 70 | S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 72 | S&F in repairs Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 73 | S&F in repairs 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. complete all as specified and as directed. Note: Fixture/fittings shall be measured & paid under relevant item |
| 74 | S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 75 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: Stainless steel butt hinges shall be paid separately under relevant item. |
| 76 | S&F stainless steel butt hinges AISI 304, size 100 mm complete all as specified and as directed. |
| 77 | S&F stainless steel barrel tower bolts AISI 304, 200 mm long, complete all as specified and as directed. |
| 78 | S&F stainless steel handles, 150 mm long AISI 304, complete all as specified and as directed. |
| 79 | S&F stainless steel sliding door bolts AISI 304, 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and as directed. |
| 80 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws dismantling Asbestos/GI sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 81 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling Asbestos/GI sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 82 | M&L for machine cut prepolished kota stone slab flooring 18-20mm thick over 20mm thick cement screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, including dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed. |
| 83 | M&L for machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed. |
| 84 | S & F 18/19mm thick (any colour/pattern) Wood plastic composite ( WPC) board having density of 650 Kg/Cum , solid in cupboard with shelf and shutter full size fitted under or above including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels, continuous piano hinges, magnetic catcher, handle, hasp & staple etc including dismantling of existing boarding/shutter any type any description complete all specified & as directed.Note : Colour/Pattern of WPC board to be decided by Engr-in-Charge/GE. |
| 85 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and including fixing of 5mm thick PVC sheet fillets of width 35mm (spacing @300mm c/c vertically and 600mm c/c horizontally upto any heigt) for fixing sheet on it including dismantling of existing wall panelling/boarding with fillets any type any description complete all as specified and as directed. |
| 86 | S&F hollow WPC Wall panelling made from corrugated (any type of corrugation as directed) wood grain printed WPC sheet, panels interloked with each other and fixed with wall including dismantling of existing wall panelling/boarding with fillets any type any description complete all as specified and as directed. |
| 87 | S&F hollow PVC Wall panelling made from wood grain printed PVC sheet, panels interloked with each other and fixed with wall including dismantling of existing wall panelling/boarding with fillets any type any description complete all as specified and as directed. |
| 88 | S& F roller blind curtain/ Canvas any type/any desing/any pattern including all aceesories required to make it functional complete all as specified. |
| 89 | Disconnecting existing tanks and cleaning exc 500 Ltrs but n.exc 1000 Ltrs capacity, setting aside (or lowering if required) and re-fixing in same position after cleaning the tank complete all as specified and as directed. |
| 90 | Disconnecting existing tanks and cleaning exc 1000 Ltrs but n.exc 2000 Ltrs capacity, setting aside (or lowering if required) and and re-fixing in same position after cleaning the tank complete all as specified and as directed. |
| 91 | Disconnecting existing tanks and cleaning exc 2000 Ltrs but n.exc 2000 Ltrs capacity, setting aside (or lowering if required) and and re-fixing in same position after cleaning the tank complete all as specified and as directed. |
| 92 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender