Tender For Addition/Alteration To ‘L Block Of Kv School At Sector 47 Chandigarh
Tender Value
63.51 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
4 days left
EMD
1.27 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To ‘L Block Of Kv School At Sector 47 Chandigarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Aug-2026 | Date Corrigendum | Date | 13-Aug-2026 |
| 2 | 13-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches in any type of soil , not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches , complete all as specified and directed. |
| 3 | Removing excavated soil to a distance exceeding 1.50 kilometre but not exceeding 5.00 Kilometre and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed. |
| 4 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for Plain cement concrete (1:3:6), type D-2, using 40 mm graded mechanically crushed stone aggregates and finished the surface rough to provide adequate bond for the topping as in sub base ,foundations, filling and mass concrete, complete all as specified and directed. |
| 6 | M&L for Providing cement concrete 1:2:4 type B0 (12.5mm crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 7 | M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement sand mortar 1:6 complete in and including demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc for area where servicable bricks retrived and removal of rubbish outside MoD land ,complete all as specified and as directed. |
| 8 | M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius (except bricks) built in cement sand mortar 1:4 complete in and including demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc for area where servicable bricks retrived and removal of rubbish outside MoD land ,complete all as specified and as directed.Notes: (i) Servicable bricks retrived from demolition of item No.07 and this item shall be used under this item after proper cleaning and washing of old bricks.(ii) Brickwork work to be executed in any position or in any patches or as per site requirement. |
| 9 | S&F 2nd class Hardwood plain, solid, straight battens and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed and removing of old unserviable frames/battens complete all as specified and directed. |
| 10 | S&F 35 mm thick factory made Flush shutters ,solid core construction with block board core and plywood face panels commercial type on both sides, duly provided with 6mm thick Teakwood leeping on edges alround, fitted to chowkats, , complete all as specified and as directed. |
| 11 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed surface with PCC 1:2:4 type B-0 and CM 1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 12 | Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed surface with PCC 1:2:4 type B-0 and CM 1:4 & finished with similar specification as exists, complete all as specified and as directed. |
| 13 | S&F barrel tower bolts aluminum anodizes of extuded section and fixed of 150 mm long size (length of bolt) , complete all as specified and directed. |
| 14 | S&F handles 'D' type of size 125 mm ,extruded aluminium alloy , fabricated type anodized ,complete all as specified and directed. |
| 15 | S&F aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed. |
| 16 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length of cover plate 140mm , complete all as specified and directed. |
| 17 | S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed to steel frames with stainless steel tacks, or stainless steel wire staples, or fixed to wooden frame with first class hard wood bead, ,complete all as specified and directed. |
| 18 | S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 19 | M S work as Framed works such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes,framed guard bars barred iron doors ladders, framed balusters walk ways railing, framed work of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding sliding bolts etc ,drilling bolting or reveting etc and similar work conforming Fe-290 Gde E-165 ,complete all as specified and directed. |
| 20 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunkfor screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 ,complete all as specified and directed. |
| 21 | S&F bands, straps, supports or stays for rainwater, plain angle cleat for securing purlin, knee piece inserts, two way and three way straps, plate washer and similar small articles, confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 22 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc ( Fe-410,Gde-E-250) quality B including all fittings omplete all as specified and directed. Please Enable Macros to View BoQ information |
| 23 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc ( Fe-410,Gde-E-250) quality B including all fittings omplete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 13, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 20, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender