Tender For Renovation Of The Building Of Field Office Of Regulation/ Sstv/Cctv Control At Beas Dam Site.
Tender Value
16.96 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
17 days left
EMD
33928
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of The Building Of Field Office Of Regulation/ Sstv/Cctv Control At Beas Dam Site.
BOQ
| Sl. No. | Item Description |
| 1 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) windows of area 3sqm and below. |
| 2 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3sqm and below. |
| 3 | Supplying pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality fixed in position excluding the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.(d) Doors and windows frame of size 161mm x60mm with 40mm wide double rebate weighing 4.05kg per meter. |
| 4 | Supplying onenable steel windows of standard rolled steel Z section joints mitered and electrically flash welded with iron fittings including necessary iron handles, Peg stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.(b) Above one sqm area. |
| 5 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) glass panes 4mm or 10.75 kg/ sqm exceeding 0.4 sqm of area. |
| 6 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5mm width fixed with machine screws complete in all respects. |
| 7 | Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same ofposition.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick. |
| 8 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.(A)300x16mm |
| 9 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 10 | Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base. |
| 11 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s lessthan 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 finesand), complete. ( Full body vitrified tiles havepigment in entire body / thickness of tile whichmakes chips and scratches less noticeable andmakena ideal choice for high traffic zones.)Size 600x600 mm |
| 12 | Dismantling roofing First class mud roofing |
| 13 | Terracing consiting of tiles 22.86x11.43x3.83cmlaid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including twocoats of bitumen laid hot at 1.65 Kg. /Sqm top ofR.C.C. slab including grouting with cement sandmortar 1:4 and top surface to be left clean afterwire brushing. |
| 14 | Providing and laying anti skid ceramic floor tiles of size 300x300mm x10mm thick of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey. Fume red brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete white cement slurry in joints including corners angels and beading. |
| 15 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy , bottle green, black of size 200x300mm, 100x200mm, 200x200mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 16 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.(using mechanical mixer for mixing of material) |
| 17 | 12.5mm thick cement plaster1:5. |
| 18 | Appling priming coat with metal primer on new steel or iron work including preparation of surface. |
| 19 | Painting two or more coats with aluminum paint to give an even shade excluding priming coat. |
| 20 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. |
| 21 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 22 | Scraping (a) white wash and colour wash. |
| 23 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of parisand chalk mitti including finishing the surface to the required finish complete. |
| 24 | Finishing walls with textured exterior paint ofrequired shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 25 | Wire Gauge deodar wood door shutter without springs housed in chowkats (Single Leaf) 35mm thick |
| 26 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc complete.(a) ISI designation no I (size of door up to 700mm) |
| 27 | RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid inheavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring fan point (Without fan box) |
| 28 | Wiring light point) |
| 29 | Wiring 6 Amp. wall socket point |
| 30 | Wiring 16/20 Amp. power plug control point |
| 31 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 2.5 sq.mm (Un-sheathed) |
| 32 | Overall size 4 sq.mm (Un-sheathed) |
| 33 | MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 34 | MCB Double Pole 50, 63 amp. (10kA, Curve-C) |
| 35 | MCB Four Pole 50, 63 amp. (10kA, Curve-C) |
| 36 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623- 1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuitidentifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-SP&N Double Door Distribution Board 8 way each |
| 37 | SP&N Double Door Distribution Board 12 way each |
| 38 | TP&N Vertical Double Door Distribution Board 12 way each |
| 39 | Providing & Fixing LED bulb 9 watt |
| 40 | DISMANTLING WIRING POINTS & FITTINGS:Dismantling old wiring points including necessary repairs to wall etc:-Fan, light or call bell point |
| 41 | Wall socket, power plug point |
| 42 | Nicking cement concrete surface (over 28days old including preparation and layingslurry |
| 43 | Coloured Granite stone tiles 15mm to 20mm thickin skirting, risers of steps, dado walls and pillarslaid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neatcement slurry mixed with pigment to match theshade of stone, including rubbing and polishingincluding labour for fixing dowel pins and cramps Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender