Tender For Special Repair To Bldg No P-12 And T-20 At Tibri Mil Stn Under Ge Gurdaspur.
Tender Value
29 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
4 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-12 And T-20 At Tibri Mil Stn Under Ge Gurdaspur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Aug-2026 | Corrigendum No 1 | Other | 11-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing existing treatment, all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and cleaning the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/crack sand enhance the adhesion of the coating. The following procedure to be adopted :-• Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . (Note : Application of water proofing treatment will be done by Authorised Applicator of company only) . |
| 2 | M&L for PCC 40mm thick 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in flooring, sub-base, padding making surface even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of RCC of any description complete all as specified and directed by Engr-in charge. |
| 5 | M&L for RCC 1:1.5:3 type B-0(using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 6 | M&L for mild steel deformed TMT bars 5mm to 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & directed. |
| 7 | Form work to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja landing and similar work n exc 200mm thick complete all as specifed & directed. |
| 8 | Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 9 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 10 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 11 | Removing excavated materials not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed. |
| 12 | M&L for hardcore of gauge of broken stone/boulder n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed |
| 13 | M&L for 15 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 14 | M&L for 12 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 15 | M&L for 15 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L for 12 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M&L for preparation of new surfaces of wall, making good holes, cracks, etc and applying two coats of 100% premium exterior acrylic emulsion paint of apex ultima or equivalent having volatile organic compound (VOC) less than 50gm/litre and ulraviolet resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior weather paint of required shade company depot tinted with silicon additives incl one coat of alkali resistance primer with min 1mm thick putty complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper of wall over a coat of white putty on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for granite (of any type) work (table rubbed and polished) 18 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of existing work complete all as specified and directed. (Granite shall be laid in one piece only. No joints shall be permitted). |
| 21 | M&L for dark/light coloured vitrified tiles (double charged) 8-10 mm thick joint free (square/rectangular) area of each tile exc 0.42 sqm but n.exc. 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including demolition of existing tile complete all as specified. |
| 22 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado and demolition of existing tile complete all as specified. |
| 23 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 24 | M&L for 75mm thick cement cocnrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repair 4mm thick aluminium composite pannel (ACP) sheet for wall cladding, ceiling etc, colour approved by GE incl necessary aluminum frame work as required including necessary fixing arrangment such as screwing, bolting, adhesive solvant on PVC frame all as specified by Engineer-in-Charge. |
| 26 | M&L for glass fibre reinforced gypsum board 12 mm thick for insulation and accoustic purposes, 595mm x 595mm in size, fire resistance with micro tegular & tegular edge, fixed with nails to timber frame work or with staples on snap grid fixed in ceiling incl dismantling of existing board with frame work complete all as specified and directed by Engineer-in-Charge. (Note:-Frame work for ceiling shall be measured and paid separately). |
| 27 | S&F hangers 6mm dia GI (upto 1200mm length adjusting level) as required fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long incl anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 28 | M&L for wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 29 | M&L for 80 mm thick PCC (M-35) factory made with grey cement interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand including dismantling of existing tiles complete all as specified and as directed by Engineer-in-Charge. (Note Sand will be paid under relavent item). |
| 30 | M&L for vitrified designer, heavy duty tile of size 400mm x 400mm, 12mm thick, coloured, outdoor, set, jointed and pointed in neat cement slurry including cement screed bed 15mm thick in CM 1:4 incl demolition existing tiles with screed complete all as specified and directed. |
| 31 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 33 | S&F pre-painted galvanlume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls,fixed with self tapping screws including dismantling of old asbestos/ corrugated/ semicorrugated sheet all as specified and directed. |
| 34 | Dismantling framed work timber scantlings 40sqcm and over in section, in any position complete all as specified and directed. |
| 35 | S&F of rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface all as specified. |
| 37 | M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and as directed. |
| 38 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 39 | S&F 500 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 40 | S&F in repair 20 mm float ball brass valve high pressure with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 41 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 42 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 43 | S&F gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 44 | S&F in repair vitreous china coloured WC Italion finish pedestal pan with attached vitreous china flushing cistern (monolithiic type) of push button type having dual flushing cistern of same colour including pvc seat cover same colour including CP Jet chromium plated with PVC connection 15mm bore complete all as specified and directed. |
| 45 | S&F in repair vitreous china table top wash basin, white rectangular bowl, size 550X400X140mm excluding taps but including coupling complete all as specified and directed. |
| 46 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed. |
| 47 | S&F in repair for 15mm bore stop/angle valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed. |
| 48 | S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed. |
| 49 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as directed by Engineer-in-Charge. |
| 50 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 51 | S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor including dismantling of existing all as specified and directed |
| 52 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor including dismantling of existing complete all as specified and directed. |
| 53 | S&F in repair PVC (SWR ) bends 110 mm bore any radius complete all as specified and directed. |
| 54 | S&F in repair PVC (SWR ) bends 75 mm bore any radius complete all as specified and directed. |
| 55 | S&F in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 56 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed |
| 57 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 58 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy bracket and guard rail etc complete all as specified and directed. |
| 59 | S&F toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 60 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, including taking down existing all complete and the directions of Engineer-in-Charge. |
| 61 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 62 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges(as required) tower bolt (02), anodised aluminum snap beading screws etc. complete all as specified |
| 63 | S&F 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 1.00 sqm in each pane in aluminium door or window shutter complete all as specified and directed |
| 64 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 65 | S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed. |
| 66 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 67 | S&F in repair floor door stopper 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete complete all as specified and directed by Engineer-in-Charge. |
| 68 | E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 69 | M&L for point wiring with PVC insulated and PVC unsheathed multistranded FRLSH copper conductor cable of size 1.5 Sqmm including existing concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way modular switch complete all as specified and directed. |
| 70 | All as per Srl item No 69 above but one 5 amp modular socket outlet on independent board. |
| 71 | All as per Srl item No 69 bove but one 5 pin modular socket outlet 5 amp on same board. |
| 72 | All as per serial item No.69 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. |
| 73 | M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt, FRLSH cable of size 6 sqmm (red for phase and black for neutral) including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 32mm dia and 6 sqmm multistranded copper conductor cable PVC unsheathed green colour for earthing with complete accessories duly connected with earth dolly complete including taking down old unserviceable wiring complete all as specified and directed. |
| 74 | S&F in replacement of LED tube light fitting 20 watt for all purpose surface and wall mounted with single side connection polycarbonate LED batten with aluminium housing and integrated electronic driver of capacity 20W, four feet and connection with PVC insulated twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. |
| 75 | S&F modular fan regulator 5 step type size 100 watt complete all as specified and directed. |
| 76 | S&F modular lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten/ angle fittings complete al as specified and directed. |
| 77 | M&L for ceiling rose surface bakelite 65x50mm three terminal complete al as specified and directed. |
| 78 | S&F modular switch 1 way, 1 module 6 amps single pole one way complete all as specified and directed. |
| 79 | S&F modular socket, 2 module 6A 2/3 pin complete all as specified and directed. |
| 80 | S&F modular switch 1 way, 16 amps, 1 module complete all as specified and directed. |
| 81 | S&F modular socket, 6A/ 16A -2/3 pin combined, 2 module, complete all as specified and directed. |
| 82 | S&F modular switch 2 way, 6 amps, 1 module complete all as specified and directed. |
| 83 | S&F LED light fitting 1x9 watt/ 1x 10 watt bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 84 | S&F decorative type 9W, LED wall mounting fittings complete set including 9W LED lamp complete all as specifed and directed. |
| 85 | S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 32mm thick with nuts, bolts and washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts and bolts etc complete all as specified and directed. |
| 86 | S&F LED street light fitting 45 Watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 87 | S&F ceiling fans, complete with three blade, down rods, electronic regulators and accessories 230V, 1400mm sweep, min air delivery 245 CFM with services value 6.00 Bee, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 88 | S&F ceiling fans, complete with three blade, down rods, electronic regulators and accessories 230V, 1400mm sweep, min air delivery 245 CFM with services value 6.00 Bee, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender