Tender For Providing Of Chain Link Fencing / Barbed Wire Fencing At Certain Locations Under Ge (Af) Srinagar.
Tender Value
43.55 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
87100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Chain Link Fencing / Barbed Wire Fencing At Certain Locations Under Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in any type of soil, complete all as specified and directed. |
| 2 | M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), benching / copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 3 | M&L for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E -165, complete all as specified and directed. |
| 4 | Supply only MS galvanised chain link fencing any size and dia of mesh, straining bolts, etc. including provision of binding wire & fixed to angle iron post, complete all as specified and directed. |
| 5 | Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc., complete all as specified and directed.Note: (i) Supply only fencing, will be measured and paid separately.(ii) Mild steel nut bolt, line wire and flat will be measured and paid separately. |
| 6 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, as in repair etc. (each line of wire to be measured), complete all as specified and directed. |
| 7 | S&F MS round bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for colm & backing ends and binding with and include MS wire (annealed) not less than 0.90 mm dia conforming to Fe-410 W (Gde E-250) quality-A, complete all as specified and directed. |
| 8 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other to be fitted with washers and one hexagonal or square nut length of bolt exc.5 cm but n exc 10 cm long & dia of neck 11 to 15mm, complete all as specified and as directed. |
| 9 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 10 | Excavation over areas n.exc 1.5m deep and getting out in any type of soil, complete, all as specified and directed. |
| 11 | Excavation over areas exc 1.5m deep but n.exc 3.0m deep and getting out in any type of soil, complete, all as specified and directed. |
| 12 | M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 13 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter Flat rough finished surfaces of concrete, complete all as specified and directed. |
| 14 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc. vertical (flat) or to batter for fair finished surface of concrete, complete all as specified and directed. |
| 15 | M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 16 | M&L for Reinforced cement concrete, M-30 (Design Mix) (using 20 mm graded crushed stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses, complete all as specified and directed. |
| 17 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 18 | M&L for MS TMT bars 05mm dia and over upto 10mm in in stirrups, spacers and binders, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 19 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 20 | Preparation of new surface of wall and applying two coats of cement based paint over one coat of primer, complete all as specified and directed. |
| 21 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-410- W (GdeE-250) quality B (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed. |
| 22 | Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm, complete all as specified and directed. |
| 23 | Removal of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed. |
| 24 | S&L 6mm thick MS sheet as in gate conforming to Fe 410 Gde E-250 quality- A, complete all as specified and directed. |
| 25 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender