Public Administrative Department Local Bodies Closing in 8 days TDR #56571684

Tender For Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),

Issued by Local Bodies · Meerut, Uttar Pradesh
Tender Value
5.44 Crore
Estimated cost
Bid Submission
05 Aug 2026
8 days left
EMD
29.22 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),

BOQ

Name of Work:- Integrated development work of Jaibhim Nagar and Kas ur slums in Municipal Corporation Meerut under State Smart City Scheme. (Road construction, park construction, community centre, community toilet, library and street lighting work),
Sl. No. Item Description
1Construction work of community building in slum area in Ward-09 Kasampur. Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
2Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
3M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
4M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
5R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
6R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
7Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
8Mild steel or iron such as in plane reinforcement concrete.
9Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
10Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
112.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
1212 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
13Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
14Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
15Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
16Providing wall putty on new surface with approved qwality
17Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
18Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
19For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
20Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
21Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
22Aluminium Tower-bolt
23Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
24providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
25Providing and placing on terrace polythene water tank isi marked
26Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
27b) 20 mm dia. nominal outer dia Pipes
28PVC pipe of 110 mm for drainage system
29Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
30Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
31Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
32White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
33S/F 15 mm C.P. Brass angle valve with comp.
34Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
35Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
36S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
37Supply and fixing of 3.8 cm. (1½\\") thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings
38M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A) for gate .70 kg per gate weight
39S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
40supply of LED Bulb
41Construction work of community building in slum area in Ward-13 Jaibhimnagar. Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
42Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
43M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
44M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
45R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
46R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
47Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
48Mild steel or iron such as in plane reinforcement concrete.
49Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
50Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
512.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
5212 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
53Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
54Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
55Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
56Providing wall putty on new surface with approved qwality
57Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
58Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
59For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
60Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
61Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
62Aluminium Tower-bolt
63Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
64providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
65Providing and placing on terrace polythene water tank isi marked
66Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
67b) 20 mm dia. nominal outer dia Pipes
68PVC pipe of 110 mm for drainage system
69Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
70Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
71Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
72White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
73S/F 15 mm C.P. Brass angle valve with comp.
74Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
75Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
76S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
77Supply and fixing of 3.8 cm. (1½\\") thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings
78M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A) for gate .70 kg per gate weight
79S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
80supply of LED Bulb
81Work of installing interlocking tiles and benches on shed and Earpoch Road in cremation ground in Ward-09, Kasampur slum. Excavation in foundation in ordinary soil (Loam ,clay or sand )including lift upto 1.50 M. And lead upto 30 M. And including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removel and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches.
82Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work SI no.273.
83M-150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
8412 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
85Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
86R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
87M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
88Supply and providing 53mm to 22.5mm size stone aggregate
89Laying spreading and consolidation of 12 cm (loose) thick coat of stone ballast but excluding roller charge As per SI no 755 b
90Supplying & fixing 80 mm thick Precast cement concrete I shape inter locking paver block ISI mark confirming to IS 15658-2006 with top layer of minimum 5 mm thickness having plan dimention 200x( 160+120mm) of op cement , smooth high gloss finish, skid resistant,manufactured from rubur moulds through vibro -compression mechanism. The compressive strength of concrete pavar block shall not be less than 40MPa and weight 4.5 kg per no. including cost of meterial, with blanket layer of 4.00cm thick fine sand including labour T& P etc required for proper completion of the work as directed by Engineer-in-charge. grey and colour tile As S.I. No New Item 17
91Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats
92Providing cement primer on old/new surfaces
93Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,+661
94paniting roofs or other iron work in large area with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644+645 )
95M.S. or iron work in stair case roilling in heavy sizes such as trusses, built up gates, records racks, roof work, Gates etc including rivetting or welding where necessary. S.I. 502 A
96Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Tools &plants etc. required for proper completion of the work and including wastage.
97Supplying & fixing of Rcc bench as portal gem +all comp of work
98Supply & fixing of sign board at site proper completion of work
99Work of installing lights in the slum area of ​​Ward-09, Kasampur Supply and fixing of 6 mtr GI octagonal Pole of approved make (top Dia 70 mm, bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single single arm bracket 1 mtr length in 1:2:4 RCC foundation, Bolt including the cost of foundation,excavaion & back filling and required T & P complete in all respect
100Supply and fixing LED street light fitting having Dia cast aluminium body and differs with driver set suitable for 30 watt 240 watt confirming to IP 66 protection complete in all respect
101Supply and Fixing Sign Board at site.+all comp.of work.
102Work of installing lights in the slum area of ​​Ward-13 Jaibhimnagar. Supply and fixing of 6 mtr GI octagonal Pole of approved make (top Dia 70 mm, bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single single arm bracket 1 mtr length in 1:2:4 RCC foundation, Bolt including the cost of foundation,excavaion & back filling and required T & P complete in all respect
103Supply and fixing LED street light fitting having Dia cast aluminium body and differs with driver set suitable for 30 watt 240 watt confirming to IP 66 protection complete in all respect
104Construction work of park in Ward-09 Kasampur slum. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches.
105Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
106R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
107Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
108M-150 brick work in 1:4one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
109Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
11012 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
111E/W in filling from out site 8km distance from site i/c all comp of work.
112Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats
113Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade
114M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work for grill weight per 60 kg For Gate weight per 85 kg
115Paniting roofs or other iron work in large areas with two coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked. (S.I. 644,645 )
116Su-kam LED solar light 15 watt 35 w pannel
117Swedish Gym structure of pipe -35 mm pipe of leader 25 mm Area - 4.5m x 1.2 m, as item no AE 808
118supply & fixing Cross Walker as item no AE 1303
119supply & fixing High pull chair.
120supply & fixing outdoor Rowing.
121Supplying & fixing united sports emporium garden swing without roof 2 seater all complete work. rate as per gem portal
122Supplying & fixing united sports emporium slide ladder virgin polytheylene terephthalate and full Arch shape all complete work. rate as per gem portal
123Construction work of park in Ward-13 Jaibhimnagar slum. Excavation in foundation in ordinary soil (Loan, clay or sand) including lift upto 1.50M and lead upto 30M. and including filling watering and ramming of excavated earth into the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30M. from the foundation trenches.
124Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work.
125M-150 Brick work in 1:4 one cement and three course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. S.I.No. 305(a)
12612 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
127Cement Concrete with 2 cm gauge approved graded stone grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I.
128R.C.C. 1:1.5:3 in cement coarse sand and grit 2 cm. gauge. SIN 284 A
129Mild steel or iron such as in plane reinforcement concrete.SIN.504
130Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coatsfor plaster area
131Finishing wall with water proof paint of approved make and quality with three coat as per SI No 660,661
132Swedish Gym structure of pipe -35 mm pipe of leader 25 mm Area - 4.5m x 1.2 m, as item no AE 808
133supply & fixing Cross Walker as item no AE 1303
134supply & fixing High pull chair.
135supply & fixing outdoor Rowing.
136supply of fixing of dubble swing jola i/c all complete
137supply of fixing oftwo seater see saw option 1. i/c all complete
138Painting or varnishing two cort with one prining coat SIN 644+645
139M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
140Construction work of study room/library in the slum located in Ward 09, Kasampur. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move )
141(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.
142Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
143M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
144M-150 brick work in 1:4one cement and four course sand . mortar in superstructure including supply of all materials labour, T & P etc required for proper complition of the work
14512 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.
146Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc.
1472.5 cm (1\\") lhick 1:2:4 plain cemeht concrcte floor with cement apprcved coarse sand and 2 cm. (1\\") graded approved stone g t laid in panes linlshed with 3 mm. (1/8\\") floating coat of neat cement oi cemeni and marble dusl in rato 5:1 as specified over and including B cm (3') thick base concrete consisting of cemenl, frne sand of 1.25 lineness modulus and brick ballast 4 cm. (1%')gauge in the plopodion of 1:4:8 and removing any ovedapping modar al the joints of the penals if any and giving lhem F unifo.m iinish, including.supply of all materials, labour, Tools & plants elc. required for proper completion of the work
148Providing wall putty on new surface with approved qwality in all com
149paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked.
150M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
151Oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an eves hade over & including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth ncluding cost of all materials.
152R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5;3 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
153RCC 1:1.5:3 in cement coarse sand and grit 2 cm. gauge.
154Mild steel or iron such as in plane reinforcement concrete.
155Providing and placing on terrace polyethylene water storage tank isi marked.
156P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
157S/F of 550x400 size wash basin including C.I. Bracket c.p brass and c.p. brass waste pipe of standard patter with single 15 mm c. p brasspiller tap
158Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply i/c all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.0 m spacing this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same i/c testing of joints complete as per direction of engineer in charge. 15 mm dia nominal outer dia pipes
15920 mm dia nominal outer dia pipes
160P/F 15 mm nominal CP brass bib cock of approved quality conferming to IS 8931
161S/F 15 mm C.P. Brass angle valve with comp.
162Supply and fixing of 10 cm (4\\") inernal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\\"x1/8\\") fixed to walls with and including supply of 15 cm (6\\") long 6 mm (1/4\\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes.
163Wiring point for light with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131C)
164S/F switch box made up of 16 swq 250x200x65 thick As SI No. 162
165S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
166S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
167Supply and fixing Galvanized comugated iron roofing 24 B.W.G. in position including supply of all materials, labour, tools & plants etc. Required for proper completion of the work and including wastage.
168Construction work of study room/library in the slum located in Ward 13 Jaibhimnagar. (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move )
169(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand.
170Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion are 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
171M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
172M-150 brick work in 1:4one cement and four course sand . mortar in superstructure including supply of all materials labour, T & P etc required for proper complition of the work
17312 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc.
174Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc.
1752.5 cm (1\\") lhick 1:2:4 plain cemeht concrcte floor with cement apprcved coarse sand and 2 cm. (1\\") graded approved stone g t laid in panes linlshed with 3 mm. (1/8\\") floating coat of neat cement oi cemeni and marble dusl in rato 5:1 as specified over and including B cm (3') thick base concrete consisting of cemenl, frne sand of 1.25 lineness modulus and brick ballast 4 cm. (1%')gauge in the plopodion of 1:4:8 and removing any ovedapping modar al the joints of the penals if any and giving lhem F unifo.m iinish, including.supply of all materials, labour, Tools & plants elc. required for proper completion of the work
176Providing wall putty on new surface with approved qwality in all com
177paniting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq Metre) paint (British antesol or equivalent) including supply of all materials labour Tools & plants etc required for proper completion of the work paint to be used ISI Marked.
178M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)
179Oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an eves hade over & including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth ncluding cost of all materials.
180R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5;3 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
181RCC 1:1.5:3 in cement coarse sand and grit 2 cm. gauge.
182Mild steel or iron such as in plane reinforcement concrete.
183Providing and placing on terrace polyethylene water storage tank isi marked.
184P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
185S/F of 550x400 size wash basin including C.I. Bracket c.p brass and c.p. brass waste pipe of standard patter with single 15 mm c. p brasspiller tap
186Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply i/c all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.0 m spacing this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same i/c testing of joints complete as per direction of engineer in charge. 15 mm dia nominal outer dia pipes
18720 mm dia nominal outer dia pipes
188P/F 15 mm nominal CP brass bib cock of approved quality conferming to IS 8931
189S/F 15 mm C.P. Brass angle valve with comp.
190Supply and fixing of 10 cm (4\\") inernal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\\"x1/8\\") fixed to walls with and including supply of 15 cm (6\\") long 6 mm (1/4\\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes.
191Wiring point for light with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131C)
192S/F switch box made up of 16 swq 250x200x65 thick As SI No. 162
193S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
194S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
195Supply and fixing Galvanized comugated iron roofing 24 B.W.G. in position including supply of all materials, labour, tools & plants etc. Required for proper completion of the work and including wastage.
196Construction work of six seater public toilet and five seater urinal in Ward-09 Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
197Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
198M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
199M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
200R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
201R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
202Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
203Mild steel or iron such as in plane reinforcement concrete.
204Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
205Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
2062.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
20712 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
208Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
209Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
210Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
211Providing wall putty on new surface with approved qwality
212Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
213Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
214For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
215Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
216Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
217Aluminium Tower-bolt
218Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
219providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
220Providing and placing on terrace polythene water tank isi marked
221Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
222b) 20 mm dia. nominal outer dia Pipes
223PVC pipe of 110 mm for drainage system
224P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
225Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
226Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
227Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
228White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
229S/F 15 mm C.P. Brass angle valve with comp.
230Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
231Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
232S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
233S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
234supply of LED Bulb
235S/F Sign Bord all Complete
236Construction work of six seater public toilet and five seater urinal in Ward-13 Excavation in foundation in ordinery soil (loam,caly or sand) i/c lift upto 1.5 m and lead upto 30 m and i/c filling watering and ramming of excavated earth
237Concrete with 4 cm. gauge Brick Ballast fine sand of 1.25 F.M. and cement in proportion of 12:6:1 in foundation and under floors, including supply of all materials, labour. T & P etc. Required for proper completion the work.
238M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work
239M-150 brick work in 1:4 one cement and four course sand . mortar in Superstructure including supply of all materials labour, T & P etc required for proper complition of the work
240R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in Columnand T-Beam
241R.C.C. Work with cement, approved coarse sand & 4 cm gauge approved stone grit in proportions of 1:1.5:3 excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. in slabs
242Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
243Mild steel or iron such as in plane reinforcement concrete.
244Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper coinplition of the work. saplings ol gl(h upto 30 cms. measurcd at a he;ght oi1 [4. above grcund level and removal of flrbbish uplo adjstance of 50 i,4. olt slde the periphery of area ctearcd.includiflg cosl ofsand.
245Cement Concrete with 2 cm gauge approved stone grit,coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
2462.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1\\") graded approved stone grit, laid in panels finished with 3 mm. (1/8\\") floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3\\") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
24712 mm thick plaster with1:4 Cement and four course sand including supply all material and labour, T & P required for proper completion of work
248Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer - in- charge
249Supply and fixing 6 mm thick china white glazes tiles in flooring or in skirting or dado laid with 1:3 approved cement and coarse sand mortar finished with white cement slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge.
250Chequerred precast CC tiles 22 mm thick in foothpath and courtyard in neat cement slurry incl. rubbing and cleaning etc complete on 20 mm thick bed on 1:4 cement mortar medium shade pigment using 50% white cement 50% grey cement
251Providing wall putty on new surface with approved qwality
252Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.but for every coat after thefirst coat.
253Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimumthickness of powder coating 50 micron)
254For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimumthickness of powder coating 50 micron)
255Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
256Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-chargePowder coated minimum thickness 50 micron aluminium
257Aluminium Tower-bolt
258Providing and fixing stainlees steel (Grade 304) railing made of hollow tube, channels, plates, etc., including welding, grinding, buffing , Polisihing and making curvture (whereever required ) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccesary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of thr floor side of the waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fastners etc.) S.I.NO-10.28/ D.S.R-2023
259providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11 and K12 B etc. complete of stanard rolled steel sections, joints including providing and fixing of hings, pivot, priming coat of complete all as per approved design, (sectional weight of only steel mebers shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement conc. block 15X10X10 cm of C.C 1:3:6.
260Providing and placing on terrace polythene water tank isi marked
261Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes
262b) 20 mm dia. nominal outer dia Pipes
263PVC pipe of 110 mm for drainage system
264P/F water closed sqm. Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush withk standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required. As SI No. 21.12
265Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.
266Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
267Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 mm nominal bore
268White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
269S/F 15 mm C.P. Brass angle valve with comp.
270Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
271Wiring for Light point with 1.50sq mm FRLS PVC insulated insulated copper conductor single core cable in recessed medium class PVC conduit 2 way piano type switch, phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required
272S/wireing of submain with two number 4 sq mm pvc insulated 1100 v grade single core aluminium conductor cable in 20 mm dia PVC conduit on surface with one number 2.5 sqmm PVC earthing wire continuity wire etc. complite in all respect. As SI No. 211(A)
273S/F of 6 Amp to 32 Amp. SPMCB of As SI No. 1003 (B)
274supply of LED Bulb
275S/F Sign Bord all Complete
276Ward-09, Tikaram Colony, construction of drain and CC road from Sundar Pal to Ravi's house and in the nearby lanes. E/W in filling from out site 12km distance from site i/c all comp of work.
277Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
278M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
279Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
28012 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
281Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
282Consalidation of stoneee ballast excluding of roller charges and excluding all.
283Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
284Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
285Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
286Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
287R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
288Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
289Supply and Fixing Sign Board at site.+all comp.of work.
290In Ward-09, Kasampur Mohalla Tel Mandi, from Manoj's house to Pankaj's house, from Shani to Bunty, in Raju and Sonu's street, construction work of drain and road by CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
291Dismentling of B/W in cement motar with all comp of work
292Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
293Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
294M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
295Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
29612 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
297Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
298Consalidation of stoneee ballast excluding of roller charges and excluding all.
299Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
300Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
301Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
302Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
303R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
304Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
305Deduction cost of old C.C Tiles+all comp of work
306Deduction cost of old brick
307Deduction cost of old brick bat
308Supply and Fixing Sign Board at site.+all comp.of work.
309In Ward-09, Kasampur Mohalla Tel Mandi, from Sohanpal Singh's house to Sadan Lal Manothia's house, from Anar Singh to R.S. Verma, from Thapa to Harishankar Dharampal to Mangu Deepchand to Sanjay, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
310Dismentling of B/W in cement motar with all comp of work
311Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
312Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
313M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
314Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
31512 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
316Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
317Consalidation of stoneee ballast excluding of roller charges and excluding all.
318Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
319Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
320Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
321Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
322R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
323Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
324Deduction cost of old C.C Tiles+all comp of work
325Deduction cost of old brick
326Deduction cost of old brick bat
327Supply and Fixing Sign Board at site.+all comp.of work.
328In Ward-09, Kasampur, from Bhushan's house to Jaipal Singh's house, from Ajay to Dinesh, from Bittu to Rajkumar and from Shailendra to Dhanna Baba Temple and in the street of Valmiki Temple, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
329Dismentling of B/W in cement motar with all comp of work
330Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
331Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
332M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
333Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
33412 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
335Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
336Consalidation of stoneee ballast excluding of roller charges and excluding all.
337Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
338Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
339Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
340Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
341R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
342Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
343Deduction cost of old C.C Tiles+all comp of work
344Deduction cost of old brick
345Deduction cost of old brick bat
346Supply and Fixing Sign Board at site.+all comp.of work.
347In Ward-09, Kasampur Bazaar, in street no. 06 from Suresh Lodhi's house to Natthu's house, in street no. 08 from Deepak to Kedar and from Prem to Master Pritam, construction of drain and road through CC. Dismentling Reinforce cement concrete or reinforce brick work including stacking of material as direct by the engineer charge with in a distance of 60 meter (200 feet)
348Dismentling of B/W in cement motar with all comp of work
349Dismentling of Old interlocking tiles with all comp.S.I No.New Item 4
350Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]
351M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)
352Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]
35312 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)
354Construction of Granular sub base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density,complete as per clause 401
355Consalidation of stoneee ballast excluding of roller charges and excluding all.
356Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including Cost of Polythene Sheet and Dowel bar and also including complete shifting of matrials & Concrete etc.(M-20)
357Trimix for C.C. road etc.including hire & fuel charges of Concrete floater + all comp.of work
358Providing & Applying concrete hardner on C.C. road top surface etc. all comp.of work
359Providing and filling in position rubberized bitumen hot sealing compond for sealing of expansion joints in road/pavement including groove cutting as per norms etc.all complete as per direction of Engineer-in-charge.
360R.C.C. 1:1.5:3 in cement corse sand and stone grit. As SIN 284(A)
361Mild steel or iron such as in plane reinforcement concrete. As S.I. No. 504
362Deduction cost of old C.C Tiles+all comp of work
363Deduction cost of old brick
364Deduction cost of old brick bat
365Supply and Fixing Sign Board at site.+all comp.of work.
366In Ward 13, Jai Bhim Nagar slum, construction of drain and road through CC in the street from Seema Jatni's house via Shri Ram's house to Manoj Yadav's house. E/W in filling from out site 12km distance from site i/c all comp of work.
367Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
368M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
36912 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
370Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
371Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
372Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars)when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
373providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
374providing & applying concrete of hardner of cc road top surface i/c all complete
375providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
376R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
377M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
378In Ward 13, Jai Bhim Nagar slum, construction work of drain and road by CC from Akash's house to Pintu Contractor's house and from Savita Vidya Academy to Dharampal's house and in the street of Radhe Shyam and Ram Preeti. E/W in filling from out site 12km distance from site i/c all comp of work.
379Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
380M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
38112 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
382Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
383Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
384Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
385providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
386providing & applying concrete of hardner of cc road top surface i/c all complete
387providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
388R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
389M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
390Construction of drain and CC road from Neela Khokha to Raj Singh's house in Ward 13, Jai Bhim Nagar slum and in the streets of Ramkesh, Anshika Sharma and Chirag. E/W in filling from out site 12km distance from site i/c all comp of work.
391Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
392M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
39312 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
394Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
395Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
396Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
397providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
398providing & applying concrete of hardner of cc road top surface i/c all complete
399providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
400R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
401M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
402In Ward-13, Jai Bhim Nagar slum, from Bavalu's house to Arjun's house and in the lanes of Sumit Karthik and Arvind Kumar and related lanes, construction of drain and road by C.C. E/W in filling from out site 12km distance from site i/c all comp of work.
403Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
404M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
40512 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
406Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
407Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
408Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars)when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
409providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
410providing & applying concrete of hardner of cc road top surface i/c all complete
411providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
412R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
413M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
414Construction of drain and CC road in Balkishan Kannu and its adjoining lanes from Deepak Dilor's house to Sardar Factory in Ward 13, Jai Bhim Nagar slum. E/W in filling from out site 12km distance from site i/c all comp of work.
415Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
416M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
41712 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
418Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
419Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
420Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
421providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete
422providing & applying concrete of hardner of cc road top surface i/c all complete
423providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
424R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
425M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
426Construction of drain and CC road from Kishan Pal's house to Karan Singh's house and in Shiv Mandir lane in Ward 13, Jai Bhim Nagar slum. E/W in filling from out site 12km distance from site i/c all comp of work.
427Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 8:4:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
428M-150 brick work in 1:4 one cement and four course sand . mortar in foundation and plinth including supply of all materials labour, T & P etc required for proper complition of the work S.I No.305 a
42912 mm thick plaster 1:4 with Cement and four course sand including supply all material and labour, T & etc. SI No.584 (A)
430Cement Concrete with 2.0 cm. gaug;e Approved stone grid coarse sand & cement in the proportion of 4:2:1 including , T&P etc. S.I. 279 (a)
431Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
432Consinction of un-reinforced dowel jointed at expansion and constuction joint only plan cement concrete pavement thickness as per disign over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (1:2:3) coarse and fine aggregates confirming to lS 383 maximum size of coarse aggegate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capicity and appropriate weight batcher using approvd mix design laid in approved fixed side form work (steel channal laying and fixing of 125 micron thick polythene film wedges steel plates including levelling the formwork as per drawing) sprading the concrete with shovels, rakes compacled using needle screed and plate vibrators and finished in constinous operating including provision of contraction and expansion construction joints as per norms applying debonding strips primer sealent dowel bars,near approaches to bridges /culvert and consruction ,joints admixtures , as approved curing of concrete slabs for fourteen days ,curing compound,(where specified) and water finishing to lines and grade as per drawing and technical spercification clause 1501 i/c cost of polyethene sheets and dowel bars and also including complete shifting of material and concrete etc (M-30)(wuthout dowel bars) when thickness of cc is less than 20 cm ( wuthout dowel bars) m-30
433providing of trimix for cc road i/c hire &fuel charge of concrete floter+ all complete total area of road
434providing & applying concrete of hardner of cc road top surface i/c all complete
435providing and filling in posite rubberized hot sealing compound for sealing of expansion joint in road / pavement including groove cutting as per norms etc all complete
436R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra.
437M.S. (tor steel or plain) in Plain work such as R.C.C. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.
438Less labour cess 1 % of (Rs 57901136)
439Less 5 % for stenderd deduction of (Rs 57322124.64) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56571684
AUTHORITY Local Bodies
TENDER VALUE 5.44 Crore
LAST DATE 05-08-2026
Authority
Authority Name Meerut Municipal Corporation
Work Description Tender for Integrated Development Work Of Jaibhim Nagar And Kas Ur Slums In Municipal Corporation Meerut Under State Smart City Scheme. (Road Construction, Park Construction, Community Centre, Community Toilet, Library And Street Lighting Work),
Basic Detail
Tender No 675/SNV-4RT/2026
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 21 Jul 2026
Submission Date 05 Aug 2026
Open Date 05 Aug 2026
Finance
Tender Value 5.44 Crore
Tender Fee 5900
EMD 29.22 Lakhs
Exemption Not Available
Document List
606e31cd-5254-48fc-9d3c-dd043d851a71.html
BOQ_2198041.xls
NNMT2.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Aug 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

606e31cd-5254-48fc-9d3c-dd043d851a71.html

xls

BOQ_2198041.xls

pdf

NNMT2.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders