Tender For Special Repair To Bldg No. T-815, T-295 At Karu And Bldg No. T-210 At Tangtse Under Ge 860 Ews
Tender Value
47.26 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
9 days left
EMD
95500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No. T-815, T-295 At Karu And Bldg No. T-210 At Tangtse Under Ge 860 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2026 | Revised BOQ | BOQ | 10-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge |
| 2 | M&L for wall paneling 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and as directed by Engr-in Charge |
| 3 | M&L for false ceiling 6 mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decoretive face veneers on one faces ; fixed with screws to timber frame works complete as directed by Engr-in-Charge . |
| 4 | Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame work complete all as specified and as directed by E-in charge . |
| 5 | S&F in repair for SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring, all as directed by the Engr-in-Charge. |
| 6 | M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm n.exc 25 Sq cm secured with nails or brads.complete all as specified and as directed by Engr-in Charge |
| 7 | M&L second class hard wood timber scantling bullnosed, splayed,chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads.complete all as specified and as directed by Engr-in Charge |
| 8 | Taking down chowkhats or frame exc 1.50 sqm each but n exc 4 sqm each with shutters (without taking off shutters from the frame) of door & window complete all as specified and directed by Engr-in Charge |
| 9 | S&F for 2nd Class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed |
| 10 | S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge |
| 11 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in Charge |
| 13 | S&F in repair 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge |
| 14 | S&F in repair 150mm Aluminium handles,fabricated type , anodised complete all as specified and directed |
| 15 | S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 16 | S&F in repair 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all as directed. |
| 18 | Supply and fixing 3 mm sheet glass thick ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing dismantled tile and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors 1:4 CM 15 mm. etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15 mm CM 1:4 sceed bed complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for coloured Glazed ceramic tiles in vertical surface 450 x300 mm with 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing finished even and rough to receive tiles in CM 1:3 complete all as specified and directed by Engr-in-Charge. Make : Somany |
| 22 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, laid 1:4 CM in floors etc. 15 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 23 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 24 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (20mm graded crushed stone aggregate) as in floor plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for 50 mm thick PCC (1:3:6) type C2 (Using 20mm graded aggregatre) as in floor levelling and finished even and fair without using extra cement complete all as specified and as directed. |
| 26 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-Charge |
| 27 | Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge |
| 28 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet .50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for Pre- painted galvatume aluminum zinc coating GI based plain steel sheet .50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F in repair15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repair of 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) and waste pipe complete all as specified and directed by Engr-in-Charge |
| 33 | S&F in repairs vitreous china water closet (Squatt Pan) Orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe' complete all as specified and directed including 100mm CI/PVC 'P' trap.complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge |
| 35 | S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 36 | S&F Sheet glass of size 5.5 mm thick ordinary quality and glazing with with beads fixed with metal panel pins/neoprene beadings, size of pane/ partition n exc 0.5 sq. m in each. |
| 37 | M&L 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in Ceiling and Ceiling complete all as specified and as directed by E-in charge .(Note : 1. Ladders, scaffolding will be provided by Contractor where required. 2. size of Ceiling & frame may have to be changed as per the site reqmt) |
| 38 | M&L preparation of new Surfaces untreated surface apply one coat of red oxide,zink chrome and two coat of synthetic enamel (ordinary tint) paint on steel surface, over 10cm in width or girth,not otherwise described complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for 100 mm thick PCC (1:2:4) type B2 (Using 20mm graded aggregatre) as in floor levelling and finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 41 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for Fe 410-W (Gde-E-250 qanlity-A) roof trusses(framed) ,trussed,purlins,crane gantries ,rail and fastening and heavy bracket framing (Beam,tee ,angle,channel or flat iron sections) including distance pieces, cleats etc directed by Engr-in-Charge . (Note : Ladders, scaffolding will be provided by Contractor where required) |
| 43 | Demolition of Brickwork / concrete block or stone/ boulder masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 44 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete type C1 1:3:6 (20 mm graded agg) set in CM 1:4 completed all as specified and directed by Engr-in-charge . |
| 45 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 is to be finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for preparing new surfaces of plastered or unplastered and applying two coat of cement base paint over chalk whiting complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required) |
| 47 | S&F grid false ceiling GI system powder coated prelude (Main runner sec 32x24x0.30x3600mm,Cross Tee 25x24x0.30x1200 mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre laminated aluminium foil backed Gypsum tile of size 595x595x9mm thick fixed in ceiling frame work suspended by GI wire complete all as specified and as directed by Engr-in-Charge |
| 48 | M&L for Coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 49 | M&L for coloured light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed. |
| 50 | S&F in repair Sheet glass of size 5.5mm thick ordinary quality and glazing with beads fixed with metal panel pins/neoprene beadings size of pane/parition but exc 0.5 sq. m in each panel |
| 51 | S&F in repair Prelaminated particle board 12mm, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 52 | Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site. |
| 53 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site. |
| 54 | Taking down shutters of any description exc 2.00 sqm sqm each and removing form site. |
| 55 | S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with Single rebates including necessary fixing lugs, hinges, lock strike plate etc, M & L for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 56 | S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face on both sides veneer with lipping/frame to match complete all as specified. |
| 57 | S&F 125mm long Aluminium, anodised, barrel tower bolt, Mild steel or stainless steel having dia/shoot not less than 10 mm with screws complete all as specified and directed. |
| 58 | S&F 125mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 59 | S&F in 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 60 | Material and labour for preparation of old steel and iron surfaces/roof sheets of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified. |
| 61 | M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 62 | M&L for preparation of old decorated plastered or unplastered surfaces of wall, and applying two coat of cement base paint (white or tinned) complete all as specified and directed. |
| 63 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 64 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender