Tender For Providing Of Mt Veh Shed Hard Standing For B Vehilces At Kiari And Special Repair To Bldg No. Ta-155/010C And Construction Of Two Sockage Pit At Karu Under Ge 860 Ews
Tender Value
48.57 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
97500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Mt Veh Shed Hard Standing For B Vehilces At Kiari And Special Repair To Bldg No. Ta-155/010C And Construction Of Two Sockage Pit At Karu Under Ge 860 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling post or struts (wood, steel or RCC) any section incl taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L Cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, post hole, filling and mass concrete etc complete all as specified and directed by Engr-in-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and as directed by Engr-in-charge. |
| 5 | S&F of mild steel work in angle iron posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe – 290 Gde E -165complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F Rolled MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 Gde E-165), complete all as specified and directed. |
| 7 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugation side lap, fixed withL-type or J-type or cranked hook bolts and washers as in roofs, walls etc complete all as directed by Engr-in-Charge. |
| 9 | S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), with grade of zinc coating 275 as complete all as specified and direct by Engineer-in-Charge. |
| 10 | M & L for two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described including preparing new zinc(or galvanised) surfaces to receive painting by coating with mordant solution incl washing and cleaning, etc. over a coat of red oxide complete all as specified and directed. |
| 11 | Dismantling of timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section frame workcomplete all as specified and as directed by E-in charge . |
| 12 | M&L second class hard wood timber scantling plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13 Sq cm n.exc 25 Sq cm secured with nails or brads.complete all as specified and as directed by E-in charge . |
| 13 | Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc. 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for 100mm thick cement concrete type B1, 1:2:4 using 20mm graded stone aggregates as floor finish even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F in repair for SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring, all as directed by the Engr-in-Charge. |
| 16 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs blankets any thickness, including cover fillets complete all as specified and directed by Engr-in Charge |
| 17 | S&F M&L for readymade soft wood wall /Ceiling panelling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included ) as per manufacturers instruction including polishing complete all as specified and as directed by Engr-in- Charge .Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement without any cost different complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L second class hard wood timber scantling bullnosed, splayed,chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads.complete all as specified and as directed by E-in charge . |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing, complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F of 5.5mm thick sheet glass, ordinary quality and glazing with oil putty and glazing pins in square n exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 21 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge. |
| 22 | Taking down Chowkhats or frames exc. 1.5 sq. m but n.exc 4 sqm each with shutters without taking of shutter from the framecomplete all as specified and directed by Engr-in-Charge. |
| 23 | S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F for 30mm thick 2nd class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides(feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F MS butt hinges medium weight cold rolled mild steel size of hinges 75 mm complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F 200 mm long Aluminium, anodised, barrel tower bolt, fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F 150 mm long Aluminium, anodised, barrel tower bolt, fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F 150 mm size, Aluminium anodised handles fabricated type polished complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F of 250 mm long, aluminium alloy,anodised,sliding door bolts, with hasp, staple ( bolt type) and fixing clip of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded section section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F in repair of aluminum body door closer (extruded section) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F in repair of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge. |
| 33 | Demolition of old unserviceable soakage well of any size and make good the surface by filling or removing debris/ Earth, complete all as specified and directed by Engr-in-Charge. |
| 34 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed. |
| 35 | Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in hard/dense soil complete. |
| 36 | Excavating over areas, exc 3 m and n.exc. 4.50 m deep and getting out in hard/dense soil complete. |
| 37 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundation, filling and mass concrete complete. |
| 38 | M&L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:4 complete all as specified. |
| 39 | M&L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified. |
| 40 | M&L for providing RCC type B-1 1:2:4 using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 41 | M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in cover slab for manholes set in CM 1:4 including necessary form work complete all as specified and directed by Engineer in Charge. |
| 42 | M&L for formwork to soffits of suspended slabs, flat, such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc rough finished surfaces of concrete complete all as specified and as directed. |
| 43 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ® rough finished surfaces of concrete complete all as specified and as directed. |
| 44 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed. |
| 45 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 46 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engr-in-Charge. |
| 47 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 48 | Demolition and breaking up drain pipes (salt glazed ware, PVC or re-inforced concrete) set in cement mortar internal dia of pipe 100mm complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 50 | M&L PCC 1:3:6 type C-2 as in 110mm bore of pipe in concrete bed to drain pipes including packing under and haunching against the sides of pips after they are laid and tested complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F 110mm dia bore PVC (SWR) bends complete all as specified and directed.complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F 75mm dia bore PVC (SWR) bends complete all as specified and directed.complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F PVC(SWR) vent cowl of dia 75 mm complete all as specified and directed by Engineer in Charge. |
| 55 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing dismantled tile and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and joint free including 15 mm thick screed bedding in CM 1:4. for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for Coloured Glazed ceramic tiles in vertical surfaces of size 450mm x 300mmx 7mm thick over and including 10mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair One piece European WC viterus china with S/P trap & slow motion seat cover as per Cera part no. S1014124 or equivalent approved in CENC of Jaguar/Hindware etc complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in Repairs 15mm bore Bib tap brass chromium plated fancy type with capstan head handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. |
| 61 | S&F in Repairs 15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed.complete all as specified and directed by engr-in-charge |
| 62 | S&F for 25mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair stop valves 15mm bore chromium plated, cast copper alloy screwed down high pressure fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repairs PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer. Complete all as specified and directed. |
| 65 | Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 20mm bore of pipe complete all as specified and directed by Engr-in-Charge. |
| 66 | Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 25mm bore of pipe complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F 25 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repair rotational moulded polythylene water storage tanks 500 ltrs ( cylindrical vertical with closed top) hoisted and fixed in position all specified in SSR Part-I complete all as specified and directed by Engr-in-Charge. |
| 70 | M&L Concrete bed 1:4:8 type D-2 to drain pipes incl packing under hauching against the sides of pipes after they are laid and tested bore of pipes in 110 mm complete all as sepecified and directed by Engr-in-Charge |
| 71 | S&F PVC(SWR) pipes single socketed in any length 75mm dia with rubber joints fixed to walls completed all as specified and directed by Engr-in-Charge. |
| 72 | M&L 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, for ven pipe completed all as specified and directed by Engr-in-Charge. |
| 73 | Surface dressing n.exc 15cm deep in soft/loose soil. |
| 74 | M&L Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations including rafts, footings complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1988 grade St-240 |
| 76 | M&L Plate (plain or cheqered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted bolted or welded attachment comfirming to Fe 410-W (Gde E-250), complete all as directed by Engr-in-Charge. |
| 77 | Mild steel bolts neck exc 10 mm dia and n exc 15mm dia, purpose made, with hexagonal or square head end one and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long |
| 78 | M&L for Hardcor of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 79 | M&L for cement concrete 1:3:6 100mm thick type C-2 using 40mm graded stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified. |
| 80 | Providing and laying 80mm thick factory made chamferred edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine said and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 81 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded aggregate). |
| 82 | S&F for 0.50 mm thick pre-painted galvatume aluminium zinc coating GI based plain steel sheet inridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) having tensile strength 550 Mpa fixed with self tapping screws complete all as directed by Engr-in-Charge |
| 83 | S&F pre-painted galvtume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/clading to wall, fixed with slef tapping screws/J hooks and bolts as reqd and specified. |
| 84 | M&L for preparation of new steel surface of any description over 10 cm width or girth not otherwise and treating with two coats fo systhetic enamel paints over a coat of red oxide primer. |
| 85 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 86 | Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender