Tender For Construction Of Dak Banglow At Bomai Under 14Th Fca Block Tujjar Sharief District Baramulla
Tender Value
2.42 Crore
Estimated cost
Bid Submission
12 Aug 2026
20 days left
EMD
4.84 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Dak Banglow At Bomai Under 14Th Fca Block Tujjar Sharief District Baramulla
BOQ
| Sl. No. | Item Description |
| 1 | PART A(MEETING HALL) Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil |
| 3 | Providing and laying of stone solling hand Packed |
| 4 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying of Rainforcement Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.50:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying of Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 10 | Providing and laying of Reinforcement Cement Concrete excluding the cost of centring and shuttering. All work in Suspension Slabs beams Etc with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Using Imported kail (KD) wood |
| 13 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 14 | Centering and shuttering including strutting, propping etc. and removal for foundation in Footing up to plinth level |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Centering and shuttering including strutting, propping etc. and removal for Column. Pillers, Abutments ETC |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 18 | 12 mm thick cement plaster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls. |
| 19 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in roof Ceilling and Stair Steps |
| 20 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 21 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface using 12 mm thick Second Imported Ready made Penelling |
| 22 | Providing of Imported Qourian Wall paper and Fixing with CMC Chemical/ adhasive as required and the design and shade will be finilized by the Engineer in Charge (Complete Job) |
| 23 | Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 24 | Providing and fixing factory made UPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 25 | Providing and Fixing of Door and Shutters of 35 mm thick imported Kail Wood with 30 mm thick Walnut Wood Panal with groued design of Wood Carving and also including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws 250x10 mm |
| 27 | Providing and fixing bright finished Antique handles with screws 150 mm |
| 28 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws Single rubber stopper |
| 29 | Providing and Fixing of 300 mm lock system Aldrope Antique Type heavy Duty Superior Quality |
| 30 | Providing and Fixing of 200 mm Aldrope Antique Type heavy Duty Superior Quality with Lock system |
| 31 | Filling by available excavated earth (excluding rock) in trunches, plinth, sides of fondation etc, in layers not exceding 20 Cm in depth, consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 32 | Providing and laying of RBM in rooms including Ramming and all Carriage of materials by MT |
| 33 | Providing and laying of Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 34 | Providing and laying (600x600) mm size Antisked/ Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting of joints with white cement and matching pigments etc. complete ( Using kajria, Somany, Nitco, or equivalent to it of standred compant. male) |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. ( Using kajria, Somany, Nitco, or equivalent to it of standred compant. male) |
| 36 | Providing and fixing of gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels using Raj Nagar plain white marble/Udaipur green marble/zebra black marble etc or equivalent to it. |
| 37 | Providing wood work in frames of false ceiling, partitions and fixed in position using Imported KD Wood Complete Job. |
| 38 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Flat pressed 3 layer particle board or graded wood particle board IS:3087 (12 mm Thick) |
| 39 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Pre-laminated with decorative lamination on both sides MDF board conforming to IS:14587. (12 mm Thick) |
| 40 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Paanch Murabah. |
| 41 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 42 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/ 0sqm) |
| 43 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 44 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 45 | Dry RR Masonry using Quarry Stones including bond stones |
| 46 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 48 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including Painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 49 | Providing and fixing kitchen sink including making all connections excluding cost of fittings White glazed fire clay sink of size 600x450x250 mm. |
| 50 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make |
| 51 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make 15 mm nominal dia |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 53 | Providing and fixing toilet paper holder C.P. brass |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes fittings and including the base support for tank |
| 55 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 20mm OD(SDR-7.4) PPR |
| 56 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 32mm OD(SDR-7.4) PPR |
| 57 | Providing and fixing PPR Unions PPR Union 20 mm |
| 58 | Providing and fixing PPR Unions PPR Union 32mm |
| 59 | Providing and Fixing of PVC 100 mm Soil Waste Pipe |
| 60 | Providing and Fixing of PVC 75 mm Soil Waste Pipe |
| 61 | Providing and Fixing of PVC100 mm Plan bend |
| 62 | Providing and Fixing of PVC 75 mm Plan bend |
| 63 | Providing and Fixing of PVC 100 mm Color |
| 64 | Providing and Fixing of PVC 75 mm Color |
| 65 | Providing and Fixing of PVC Vent Pipe with Covel |
| 66 | Providing and Fixing of PVC 100 mm Door Junction |
| 67 | Providing and Fixing of PVC 75 mm Door Bend |
| 68 | Providing and Fixing of 15 mm Bore Brass Bibcock |
| 69 | Providing and Fixing of 15 mm Bore Angle Cock Mixer hot and Cold |
| 70 | Providing and Fixing of Brass Angle value |
| 71 | Providing and Fixing of MS Clamps for PVC Pipes |
| 72 | Providing and Fixing of Brass Stop Cock |
| 73 | Providing and Fixing of PVC 75 mm Floor Trap |
| 74 | Providing and Fixing of CP jalli |
| 75 | Providing and Fixing of CP Towel Rod including Towel Plug ETC |
| 76 | Providing and Fixing of CP Towel Ring including Towel Plug ETC |
| 77 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 78 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 79 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeaves etc., wherever necessary complete 20 mm dia. |
| 80 | Add Provision of 50 Ltr Water Heater (Gyser) includinhg all accossories of registerd Quality (Jaguar or equant to it of approved Company. Made) |
| 81 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 82 | Providing and Fixing iof 1.50 HP Unidirectional flow Water Motor of make Kirloskar or equlant to it including necessary fitting etc as required |
| 83 | P/F of Structual Steel built up section in truss rfters, Purlins, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 84 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 85 | P/Fixing of 0.20 mm colour coated G.I Panelling sheets for soffits and eaves boarding & sides incl all fixtures complete job |
| 86 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 87 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 (0.50 mm Sheets) |
| 88 | Carriage of sand by MT up to an average 20 kms |
| 89 | Carriage of aggrigate by MT up to an average 30 kms |
| 90 | Carriage of Bricks by MT up to an average 65 kms |
| 91 | Carriage of Stones by MT up to an average 30 kms |
| 92 | Carriage of Cement/ Iron by MT up to an average 20 kms |
| 93 | Add for Foundattion Stone, Inaugration Stone of required size made of Granite including cost of writing charges (Engraved letters) to be Paid as per actual measurment by the Engineer in Charge |
| 94 | PART B (GUEST HOUSE ) Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 95 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 96 | Providing and laying of stone solling hand Packed including all Carriages |
| 97 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 98 | Providing and laying of Rainforcement Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 99 | Providing and laying ofCement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 100 | Reinforced cement concrete work including attached Plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 101 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 mix (1 Cement :6 Course sand) |
| 102 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 103 | Providing and laying of Rainforcement Cement Concrete excluding the cost of centring and shuttering. All work in Suspension Slabs beams Etc with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 104 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 105 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Using Imported kail (KD) wood |
| 106 | Providing 40x5 mm flat iron hold fast 22 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 107 | Centering and shuttering including strutting, propping etc. and removal of form for foundation in Footing up to plinth level |
| 108 | Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 109 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts. |
| 110 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 111 | 12 mm thick cement Plaster in 1 : 6 (1 cement : 6 fine sand) on Brick Work in side Room Walls |
| 112 | 6 mm thick cement plaster in 1 : 4 (1 cement : 4 fine sand) in roof Ceilling and Stair Steps |
| 113 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 114 | Providing and fixing plain panelling with skirting chair rails, and cornice with necessary screws, priming coat on unexposed surface using 12 mm thick Imported ready made Penelling |
| 115 | Providing of Imported Qourian Wall paper and Fixing with CMC Chemical/ adhasive as required and the design and shade will be finilized by the Engineer in Charge (Complete Job) |
| 116 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). |
| 117 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 118 | Providing and Fixing of Door and Shutters of 35 mm thick imported Kail Wood with Walnut Wood Panal of 30 mm thick with groued design of Wood Carving and also including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick |
| 119 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws 250x10 mm |
| 120 | Providing and fixing bright finished Antique handles with screws 150 mm |
| 121 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws Single rubber stopper |
| 122 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws Single rubber stopper |
| 123 | Providing wood work in frames of false ceiling, partitions and fixed in position Using Imported KD Wood |
| 124 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Flat pressed 3 layer particle board or graded wood particle board IS:3087 (12 mm Thick) |
| 125 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) Pre-laminated with decorative lamination on both sides MDF board conforming to IS:14587. (12 mm Thick) |
| 126 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately Paanch Murabah |
| 127 | Filling by available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth, consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 128 | Providing and laying of RBM in rooms including Rmming and all Carriage of materials by MT |
| 129 | Providing and laying of Cement Concrete excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 130 | Providing and laying of 40 mm thick Cement Concrete flooring in 1:2:4 Mix (1 cement : 4 coarse sand : 4) graded stone aggregate 20 mm N/S) |
| 131 | Providing and laying (600x600) mm size Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting of joints with white cement and matching pigments etc. complete |
| 132 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 133 | Providing and fixing of gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels using Raj Nagar plain white marble/Udaipur green marble/zebra black marble etc or equalint to it |
| 134 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 135 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 136 | Dry RR Masonry using Quarry Stones including bond stones |
| 137 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 138 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including paneting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 139 | Providing and fixing kitchen sink including making all connections excluding cost of fittings White glazed fire clay sink of size 600x450x250 mm. |
| 140 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make |
| 141 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make 15 mm nominal dia |
| 142 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 143 | Providing and fixing toilet paper holder C.P. brass |
| 144 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with the base support for tank |
| 145 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 20mm OD(SDR-7.4) |
| 146 | Providing and Fixing of Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, using PN-16 pipe , 32mm OD(SDR-7.4) |
| 147 | Providing and fixing PPR Unions PPR Union 20mm |
| 148 | Providing and fixing PPR Unions PPR Union 32mm |
| 149 | Providing and Fixing of PVC 100 mm Siol Waste Pipe |
| 150 | Providing and Fixing of PVC 75 mm Soil Waste Pipe |
| 151 | Providing and Fixing of PVC100 mm Plan bend |
| 152 | Providing and Fixing of PVC 75 mm Plan bend |
| 153 | Providing and Fixing of PVC 100 mm Color |
| 154 | Providing and Fixing of PVC 75 mm Color |
| 155 | Providing and Fixing of PVC Vent Pipe with Covel |
| 156 | Providing and Fixing of PVC 100 mm Door Junction |
| 157 | Providing and Fixing of PVC 75 mm Door Bend |
| 158 | Providing and Fixing of 15 mm Bore Brass Bibcock |
| 159 | Providing and Fixing of 15 mm Bore Angle Cock Mixer hot and Cold |
| 160 | Providing and Fixing of Brass Angle value |
| 161 | Providing and Fixing of MS Clamps fpr PVC Pipes |
| 162 | Providing and Fixing of Brass Stop Cock |
| 163 | Providing and Fixing of PVC 75 mm Floor Trap |
| 164 | Providing and Fixing of CP jalli |
| 165 | Providing anf Fixing of Shower Arm with flange 225 mm |
| 166 | Providing and fixing of C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter |
| 167 | Providing and Fixing of CP Towel Rod including Rawal Plug ETC |
| 168 | Providing and Fixing of CP Towel Ring including Rawal Plug ETC |
| 169 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 170 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 171 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia. |
| 172 | Add Provision of 50 Ltr Water Heater (Gyser) includinhg all accossories of registerd Quality (Jaguar or equant to it of approved Company. Made) |
| 173 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 174 | P/F of Structual Steel built up section in truss rfters, Purlins, Tie Beams Gusset Plates ETC including Cutting, Welded hoisting and Placing in Position |
| 175 | Providing of Colour Coated high Rib Profile G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved panet on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 176 | P/Fixing of 0.20 mm colour coated G.I Panelling sheets for soffits and eaves boarding & sides incl all fixtures complete job |
| 177 | Providing and Fixing of Ridges or hips /valley of width 60cm overall width plain Colour Coted G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 178 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 (0.50 mm Sheets) |
| 179 | Carriage of sand by MT up to an avariage 20 kms |
| 180 | Carriage of aggrigate by MT up to an avariage 30 kms |
| 181 | Carriage of Bricks by MT up to an avariage 65 kms |
| 182 | Carriage of Stones by MT up to an avariage 30 kms |
| 183 | Carriage of Cement/ Iron by MT up to an avariage 20 kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender