Tender For Repair/Renovation Of Executive Engineer Office Bathroom Along With All The Bathrooms Of Divisional Complex And Other Allied Works
Tender Value
7.54 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
3 days left
EMD
15086
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Executive Engineer Office Bathroom Along With All The Bathrooms Of Divisional Complex And Other Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floors and wall laid in cement mortar including stacking material within 50 m lead for thickness 10 mm – 25 mm.Executive Engineer’s RoomExecutive Engineer’s BathroomGeneral Bathroom (Ladies and Gents) on Ground FloorTotal =196.35sqm |
| 2 | VITRIFIED FLOOR TILES(Floor Tiles)Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mmExecutive Engineer’s BathroomGeneral Bathroom (Ladies and Gents) on Ground FloorTotal Area = 17.84m2 |
| 3 | Wall TILESProviding and fixing Ist quality c wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. The Tile is fixed with chemical on walls with epoxy filling between tiles with the help of spacers.Executive Engineer’s BathroomGeneral Bathroom (Ladies and Gents) on Ground Floor (Walls)Total area=114.46sqm |
| 4 | Walls TilesProviding and fixing of Plank Tile of size 4’-0”x0’-6” of Standard quality on the walls. The Plank Tile is fixed with chemical on walls with epoxy filling between tiles with the help of spacers. The color, material and design of the panel shall be approved by Engineer in charge. The job is inclusive of material cost, labour cost and all kinds of taxesExecutive Engineer’s Room(12’+5’+17)x9’+(20’+12’+8’)x9’=472sq.mNet Area=472sq.ft LMR |
| 5 | Floor TilesProviding and laying of Plank Tile of size 4’-0”x0’-6” on floor to be laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete The color, and design of the panel shall be approved by Engineer in charge. The job is inclusive of material cost, labour cost and all kinds of taxesExecutive Engineer’s RoomRoom =400 ft2 |
| 6 | Painting of ceiling and walls with superior quality plastic emulsion (readymade) of approved manufactures and of required shade and colors complete as per manufactures specifications, one or more coats on old workGeneral Bathroom (Ladies and Gents) on Ground FloorTOTAL=11.70sqm |
| 7 | Repair to Executive Engineer’s Bathroom and General Bathroom (ladies and gents) of way providing and laying of 4”/6” /8” pvc for disposal of waste into newly constructed septic tank and making of connection of waste pipe coming from top floor and other bathrooms into new pipe including construction of 4nos main hole with C.I Covering and ring. Dismantling all sanitary items in bathrooms and pipe. Providing and fitting of Wall hung seat with all accessories 1nos, wash basin with granite base with all accessories, fitting of already existing urinal to new place including its repair, single piece English seat 02nos with all accessories, wash basin 24” o2nos, urinal with all accessories o2nos,waste coupling and waste pipe, 6 No. angle Valve ½”Ø, 8 No. pillar Cock ½”Ø, 4 No. PVC Connection 18” Ø, 3 No. Tap ½”Ø, Screw 1 ½”, Towel ring 01 nos, mirror o3 nos, soap holder 03 nos, PVC Trap 03nos, CPVC Pipe ½” for water connection, M Seal, White Cement, Steel Jaali, Fastener, Nut Bolts, cement solvent. Job including cost of material, labour charges and taxes. |
| 8 | Blinds in Executive Engineers RoomProviding and Fixing Blinds Executive Engineer’s Room of size (8’-0”x7’-0”) made out of HDPE waterproof fabric cloth with control chain or cord for smooth raising and lowering to be fitted with L Bracket and expansion screws for mounting of blinds The job includes cost of material, labour charges and taxes. |
| 9 | Renovation of 03 nos. wooden doors in Executive Engineer’s Room by way of dismantling the doors from their installed position. Dismantling all the fitting and then fixing plywood 6mm thick on both sides for fitting of1mm thick mica. Providing a and fixing mica on both sides of doors with Fevicol, Heatex, paper tape and fitting such as door handle, tower bolt lock, hinges, door stopper. Re- fitting of all the doors at their installed position including providing and fitting of new chowkatt of bathroom. The design and colour of mica is to be approved by Engineer in charge. Complete job includes material cost, labour cost and taxes |
| 10 | Executive Engineers RoomProviding and fixing scratch resistant, water proof vinyl based wallpaper on walls of retiring room with the help of acrylic adhesive and smoothing to remove bubbles Job includes material cost , labour cost and taxes.320sqft |
| 11 | Dismantling false ceiling in Executive Engineer’s office and then re- fitting it in retiring room and then making grid in bathroom for fitting of dismantled false ceiling from retiring room. Job includes material cost of grid, labour cost and taxes |
| 12 | Providing and fitting Charcoal/ fluted panels of thickness not more than 14mm on ceiling in Executive Engineer’s room by creating a sturdy metal grid securing it to the roof and interlocking the panels using nails, screw and clipping systemRoom Ceiling =400 ft2 |
| 13 | Fabrication, Providing and installation of three seater stainless steel benches with back rest as per design and drawing approved by Engineer in-charge. The benches shall be manufactured using stainless steel 316 grade of 16 gauge, round pipe shall be of 40 dia and 2mm thickness, square pipe shall be of size 50x50x2mm thickness, base plate shall be 8mm thick .The argon welding shall be done by TIG ARC WeldingLength-1300mmWidth=450mmBase plate=400x120x8mmConnecting leg 320x40mmBack RestLength=1300mmWidth=300mmSeat and back rest connecting pipe shall be of 50x40mm dia and 2mm thick |
| 14 | Providing and fitting of PVC Fluted panels with aluminium frame of thickness not less than 10 mm by creating a sturdy metal grid securing it to the roof and interlocking the panels using nails, screw and clipping systemMain Entrance wall=178.5ft2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender