Tender For Findc2627101604 Construction Of Boys Toilet For Primary School Wanchiwadi Block Achgoza Scheme: Abdp
Tender Value
3 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
5 days left
EMD
6000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Findc2627101604 Construction Of Boys Toilet For Primary School Wanchiwadi Block Achgoza Scheme: Abdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected: |
| 2 | Providing and laying of dry soling including all carriages/Leads and lifts |
| 3 | CEMENT CONCRETE (CAST-IN-SITU)Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and Placing of Plum , including all carriages/Leads and lifts |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6 coarse sand)Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.3 Columns, piers, abutments, pillars, posts and struts |
| 10 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix:13.1.2 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.1 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level5.22.1 Mild steel and medium tensile steel bars |
| 13 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.10.2.2 Welded 3 doors and 3 ventilators with 2 coats of metal oxide and paint with all fittings and fixtures as directed by Engineer Incharge |
| 14 | Supplying and placing of precast RCC rings of 6inch width and 3'dia and 1.25 inch thick for soakage RCC cover in M20 grade with reinforcement for soakage pits incl. dewatering of trenches during execution. (if required). Rings |
| 15 | Supplying and placing of precast RCC rings of 6inch width and 3'dia and 1.25 inch thick for soakage RCC cover in M20 grade with reinforcement for soakage pits incl. dewatering of trenches during execution. (if required). Rings TOPLIDS |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.11.3.1 25mm thick with 12.5 mm nominal size stone aggregate. |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.11.50.1 In colour such as White, Ivory, Grey, Fume Red Brown |
| 18 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 19 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 21 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.88.1 1 mm thick |
| 22 | EXTERIOR FINISHINGFinishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) |
| 23 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. and other fixtures and fittings (Complete Job)19.2.1.2 PN-16 pipe , 20mm OD(SDR-7.4) |
| 24 | P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete Tank Nipple |
| 25 | P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete PPR Union 20mm |
| 26 | P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete P/F Door Tee 100mm dia pvc of approved make type B |
| 27 | P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 11 0mm dia PVC SWR pipes complete job (Type B) |
| 28 | P/F soil waste and vent pipes IS 13592& fittings (IS14735) suitable to rubber ring joints which includes bends, rubber rings,jointing, junctions, etc all fittings complete job 75 mm dia PVC SWR pipes complete job (Type B) |
| 29 | P/F PVC cowel over vent pipe of approved quality type B |
| 30 | P/F 100x75 mm reducer PVC of approved quality |
| 31 | P/F of floor traps 110 mm with double chrome plated cover one grated and one closed and all other fittings required of standard quality, complete job. |
| 32 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, incl pvc connection & 50 mm waste pipe incl cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with asingle 15 mm C.P. brass pillar taps with pedestal |
| 33 | P/F CP brass bib cock of approved quality 15 mm dia of standard brand Complete Job |
| 34 | P/F brass angle value of approved quality Complete Job |
| 35 | P/F gun metal gate valve of approved quality 20mm nominal board Complete Job |
| 36 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/c padlock arrangement with lock, fixed in 1:1.5:3 mix,, inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 |
| 37 | Carriage of Sand and Agg by MT |
| 38 | Carriage of Bricks by MT |
| 39 | Add provision for signboard , photographs, SBM Logo , fittings and fixtures for main connection , H/L if any 0ther unforseen itmes . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender