Bids Are invited for Facility Management Services - Lumpsum Based - Commercial; M R Of Electrical And Civil; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Supply And Replacing Of Angle Holder Of Anchor Or Equivalent Ma

Sharing tender

Bids Are invited for Facility Management Services - Lumpsum Based - Commercial; M R Of Electrical And Civil; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Supply And Replacing Of Angle Holder Of Anchor Or Equivalent Make Of Approved Quality Including All Materials, Labour And T&P Etc.(Csi No. 22.01) , Supply And Replacing Of 6 Piano Tyre Switch Of Anchor Or Equivalent Make Of Approved Quality Including All Material, Labour And T&P Etc.(Csi No. 22.02) , Supply And Replacing Of 6 Piano Tyre Socket Of Anchor Or Equivalent Make Of Approved Quality Including All Material, Labour And T&P Etc.(Csi No. 22.03) , Supply And Replacing Of 16 Piano Type Switch Of Anchor Or Equivalent Make Of Approved Quality Including All Material, Labour And T&P Etc.(Csi No. 22.04) , Supply And Replacing Of 16 Piano Type Socket Of Anchor Or Equivalent Make Of Approved Quality Including All Material, Labour And T&P Etc.(Csi No. 22.05) , Supply And Laying 1.5 Sq. Mm Gauge Copper Wire Of Plaza Or Equivalent Make Of Approved Quality Including Connecting With Existing Wiring In Existing P.V.C Pipe Including All Materials, Labour And T&P Complete.(Csi No. 22.06(A)) , Supply And Laying 2.5 Sq. Mm Gauge Copper Wire Of Plaza Or Equivalent Make Of Approved Quality Including Connecting With Existing Wiring In Existing P.V.C Pipe Including All Materials, Labour And T&P Complete.(Csi No. 22.06(B)) , Supply And Laying 4.0 Sq. Mm Gauge Copper Wire Of Plaza Or Equivalent Make Of Approved Quality Including Connecting With Existing Wiring In Existing P.V.C Pipe Including All Materials, Labour And T&P Complete.(Csi No. 22.06(C)) , Supply And Installation Of 4X3 Ft Led Board Of Electricity Traning Institute With Acp, Iron Frame With 3D Acrylic Letter Normal Led Strip Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge.(Nsi) , Rewinding Of Burnt Ceiling Fan/Wall Fan/Exhaust Fan With Approved Copper Wire Including Cost Of All Materials Labour And T&P Etc. Complete (Burnt Wire Will Not Be Taken Back)(Csi No.22.08) , Supply And Replacing Of Burnt And Damaged Condenser Of Ceiling Fan/Exhaust Fan Of Approved Quality Including All Materials, Labours And T&P Etc.(Csi No. 22.09) , Extraction Of Defective Vt Submersible Pumps And Motor With 60 X 90 Column Pipe Then Lowering Of The Repaired Pump And Motor With Pipe And Testing The Same Including Checking Main Cut Out Fuse And Operation Of Tubewell For 24 Hours To Rits Smooth Working With All Cost Of Materials, Labour And T&P Etc Required For The Proper Completion Of The Work. (Csi No. 20.28) , Greasing Of Ceiling Fan After Cleaning The Bearing And Shaft With Oil/Petrol And Its Testing (Csi No. 22.11) , Supply And Fixing Of Led Tube Light With Batten Suitable For Up To 1 X 22 Watt Led Tube Light On Surface Complete In All Respect. Psi (1413) Cat- Aaa , Supply And Fixing Of Led Street Light Fitting Having Die Cast Aluminium Body And Diffuser With Driver Set Suitable For 30Watt. To 40 Watt. Confirming To Ip 66 Protection Complete In All Respect. Cat-Aa( Psi 1420) , Supply And Fixing Of Recess/ Surface/ Pendent Mounting Round 10 To 15 Watt Led Down Lighter Having Powder Coated Die Cast Aluminium Housing With Heat Sink, Diffuser/ Reflector And Driver Set Complete In All Respect.Cat-Aa ( Psi 1402) , S&F Of 6 To 32 . Spmcb (10 Ka) C Curve Cat-A (Psi 1002) , S&F Of 100 . 4 Pole. Isolator Cat-A{Psi 1007}(C) , Supply And Fixing Of 36 Watt To 46 Watt Indoor Recess Mounting Led Square Fitting For Armstrong Ceiling Having Powder Coated Die Cast Aluminium Housing Body With Extended Heat Sink And Diffuser Of Special Polycarbonate Meterial And Driver Set Complete In All Respect. Cat-Aa, (Csi No-1406) , Supply And Fixing Of Call Bell Of Approved Make On Polished Mdfeg/ Teak Ply Board Including Making Connections Etc. Complete In All Respect.(Csi No-1101) , Repairing Of Led Street Light For 30 To 50 Watt Complete In All Respect. (Nsi) , Supply And Fixing Of 5 Blade Exhaust Fan Ventile Air Dx 225 Mm Of Havells Or Equivalent Make Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge.(Csi No. 28.38) , Supply And Fixing Of Electronic Fan Regulator 120-280 V. Isi Marked, On The Existing Switch Board Including Making Connections, Required Material, Labour T&P Etc. For Proper Completion Of Work To The Satisfaction Of Engineer In Charge Of Work. (Csi No. 1203 (A) , Supply And Fixing Of Switch Box 100 X 100 X 50 Mm Size Of Approved Make Made Up Of 1.0 Mm Thick Isi Marked G.P.Sheet All 4 Corners Folded & Spot Welded For Screw And Holes Plugged With Pvc Nylon Caps. Two Or More Holes For Pipe Entry Of 25.4 Mm On Upper And Lower Sides Of The Box All Materials, Labour And T&P Required For Proper Completion Of Work As Directed At Site By The Engineer In Charge. (Csi No. 159) , Suppy & Fixing Of 16 , 240 Volt 3 Pin Plug Top (Psi No. 997) , Suppy & Fixing Of 2 Pole 20 240 Volt Matel Clad Plag Top For Ac .Cat-A(Psi No. 1205) , Servicing & Repairing Of Water Geyser With Material. (Nsi) , Cleaning & Servicing Of Water Geyser With Material. N , Repairing Of Room Heater Blower , Supply And Fixing 400 Tpn Sandwich Alumininum Bus Bar Trunking Complete Shutable For Ip 54 Protection With Top End Cover Plate Of 1.6Mm Thik G.I. Sheet With Sutaible Arrangement For Fixing Etc Complete In All Respect. (Psi No 921) , Supply And Fixing Of 3 Blade Ceiling Fan 1200 Mm Of Havells Or Equivalent Including All Material, T&P Etc Required For Proper Completion Of Work As Approved By Engineer In Charge.(Csi No. 28.39) , Dismantling Existing Plaster Including Disposal Of Refuse As Directed By The Engineer-I/C Within A Distance Of 60 M. (Csi No. 15.11) , Scrapping Old White Or Colour Wash Or Distemper Including Disposal Of Refuse As Directed By The Engineer-I/C Within A Distance Of 60 M. (Csi No. 15.12) , 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Six Part Of Coarse Sand(1:6), Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. (Csi No. 11.09) , Providing And Laying Floor Of 8 Mm Thick Vitrified Tiles In Flooring Or Skirting Of Approved Brand (Bell, Johnson Or Equi. Make) Size Of 600X600 Mm Of Approved Shade, Colour And Pattern , Laid Over Base Cement Mortar 1:4 Mix Including Finishing The Joints With White Cement Mixed With Pigment To Match The Shade Of Tile Including Cost Of All Material, Labour And T&P Required For Proper Completion Of The Work. (Csi No. 12.18) , Cleaning Of Septic Tank Including Disposal Of Waste Out Side The Uppcl Area As Per Direction Of The Engineer-In-Charge Including Cost Of All Labour,T&P Etc.Required For Proper Completion Of The Work.(Csi No. 20.12) , Cleaning And Opening Of Chocked W.C./ Bath / Kithchen Pipe Line Including Opening And Refixing Of Chamber Cover Including Washing Etc. Complete.(Analysis Based On Nbo - 11 25.020.(Csi No. 20.19) , Applying Two Coat Tapcrete Mixed With White Cement And Water To Proper Consistany On Leaky Surface Including Supply Of All Materials, Labour Etc. Required For Proper Completion Of Work. (Csi No. 28.16) , Applying Birla Or Equivalent Putty On New Interior Or Exterior Surface Over One Coat Of Water Based Cement Primer Of Ici Or Equivalent Brand For Smoothening And Levelling Of The Surface As Per Requirement And Direction Of Engineer I/C Including Cost Of All Material, Labour, T & P Etc Required For Proper Completion Of Work. (Csi No. 13.20) , Applying Birla Putty Or Equivalent Putty On Previousaly Bila Putty Smoothen Surface Over One Cost Of Water Base Cement Primer Of Ici Or Equivalent Brand For Smoothining And Leveling Of The Surface As Per Requirement And Direction Of E/I Including Cost Of All Material , Labour And T&P Required For Proper Completion Of Work.(Csi No.13.21) , One Priming Coat And One Coat Oil Bound Distemper On New Work Including Supply Of All Materials,Labour And T&P Etc. Required For Proper Completion Of The Work. (Csi No. 13.08) , As In Item 10 But For Every Coat After The First Coat. (Csi No. 13.09) , One Coat On Previously Old Oil Bound Distemper Surface.(Csi No. 13.10) , Providing And Fixing Flat Back 465 Mm.X 355 Mm X 265 Mm. Size Lipped Front Urinal Basin Of White Glazed Earthern Ware First Quality (Hindutan, Neycer Make) I.S.I. Marked Including Supply Of All Materials,Labour And T&P Etc. Required For Proper Completion Of The Work. (Csi No. 27.05) , Supply And Fixing Of 32 Mm Thick Single Leaf Flush Door Shutter ( Boiled Water Resistance, Phenol Maldehide Resin Bonded, Hot Pressed Factory Made) Commercial Quality To I.S.2202 Part-1 (1983) Isi Marked Including Fixing Of Wooden Cleats And Stoppers And Including Fixing And Adjustment Of Hinges,Bolts.Locks,Handles, Springs And Other Fittings But Excluding Their Supply Including All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. (Csi No. 8.54) , Painting Or Varnishing New Iron Work In Small Areas Or New Wood Work With One Coat Of Ready Mixed Priming Paint And One Coat Of Approved Superior Quality Ready Mix Paint Luxol Or Equivalent Brand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. (Csi No. 13.01) , As In Item 15 Above But For Every Coat After First Coat. (Csi No. 13.02) , Painting Or Varnishing Of Previously Painted Old Wood Or Iron Work Including Its Sand Papering,Rubbing And Cleaning As Required, For Proper Completion Of Work. (Csi No. 13.03) , Providing And Fixing Plastic Seat Cover Complete With Plastic Lid For European Type Wc Isi Marked Including Supply Of All Materials,Labour And T&P Etc.Complete. (Csi No. 27.04) , Providing And Fixing In Position 32 Mm. Dia P.V.C. Flush Pipe. For W.C. With Unions, Bends Etc. Including Supply Of All Materials,Labour And T&P Etc.Required For Proper Completion Of The Work. (Csi No. 27.13) , Providing And Fixing In Position 32 Mm. Dia P.V.C. Waste Pipe For Wash Basin. Including Supply Of All Materials,Labour And T&P Etc.Required For Proper Completion Of The Work. (Csi No. 27.14) , Providing And Fixing 600 Mm X 450 Mm Beveled Edge Mirror Of Atul, Kiran Makeglass With Indian Polish 6.50 Mm Thick Complete With Back Of 600 Mm X 450 Mm X 6 Mm Hard Board Sheet Fixed To Wooden Cieats With C.P. Brass Screws And Washers Including Supply Of All Materials, Labour And T&P Etc.Required For Proper Completion Of The Work. (Csi No. 27.15) , Supply And Fixing Of Aluminium Door Stoper. Aluminium Door Stoppers Or Cleats (Rubber & Long Screw) 18(I) , Renewing Panes Of 4.8 To 5.7 Mm Glass Including Supply Of Glass With Putty And Brads Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.(A) Glass Of 5 Mm Thick. (Csi No. 20.04) , Repairing/Serviceing Of Gas Chulha Such As Burner, Pipes And Others Required Materials For Porper Completion Of Work. (Nsi) , Job Attending By One No. Plumber/Welder/Mason/Carpenter With One No. Helper Per Hour Or Part Of An Hour. (Csi No. 20.18) , Supply And Fixing Of False Celling. 12 Mm Thlck Soft Mineral Tiles Of Size 595X595mm (Arm Strong Made)(22-2) , Neoprene Gasket For Aluminium Frame Doors/ Windows/ Fixed Glazing. 18(K) , Repairing Wooden Chair/Table As Requirement With Materials, Labour T&P Etc.Required For Proper Completion Of The Work. (Nsi) , Repairing Single Bed Through Carpanter Mistri . (Csi No.-1.08) , First Class Brick Work In 1:6 Cement And Coarse Sand Mortar In Super Structure Of One Brick Thick Including Supply Of All Materials, Labour & T&P Etc. Required For Proper Completion Of Work. (Csi No. 6.01+6.08) , Providing And Fixing Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 400Gm) ( L & K And Equi.) Fittings, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. (Csi No. 26.16A) , Cp Brass Wall Mixer Heavy Quality( L & K And Equi.) (Csi No. 26.16G) , Cp Brass Bib Cock15 Mm Dia. Heavy Quality ( 200Gm) ( L & K And Equi.)(Csi No. 26.16B) , Cp Brass Piller Cock Heavy Quality ( L&K Or Equi. ) (Csi No. 26.16J) , Cp Brass Shower Heavy Quality ( > 225 Gms ) (Csi No. 26.16E) , Providing And Fixing Full Way 15Mm Dia G.M. Gate Valve With Wheel, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. (Csi No. 26.04A) , Deep Cleaning And Servicing Of Commercial Ductable Modular Chimney Of Mess With Necessary Material, Labour, T&P Etc.Required For Proper Completion Of Work As Per Direction/Satisfaction Of Engineer In Charge. (Nsi) , Providing And Fixing Full Way 65Mm Dia G.M. Gate Valve With Wheel, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work.(Csi No. 26.04G) , Providing And Fixing Of 110 Mm Dia Pvc Pipe 4 Kg/ Sq.Cm For With Special Such As Tee, Bend, Socket, Elbow Etc Including Supply Of All Labour,Material,T & P Etc Complete Required For Proper Completion Of Work. (Csi No. 26.18) , Providing And Fixing 15 Mm Dia Isi Approved Cpvc Pipes Complete With Special Such As Bend, Tee, Socket, Cross, Cl Etc Earth Work Including Filling The Trenches Etc Required For Proper Completion Of The Work. The Rate Also Includes Concealed Gi Fitting Where Required, Cutting And Making Good The Walls Etc And All Materials, Labour And T&P Complete. (Csi No. 26.19) , Repairing/Serviceing Of Commercial Mixi For Mess In Eti As Per Required Materials, Complete In All Respect. (Nsi) , Providing And Fixing First Quality White Glazed Orissa Pattern W.C.Pan Hindustan, Cera Make. Size 580 Mm.(Hindustan,Cera Make) With Out P Trap Including Supply Of All Materials,Labour And T&P Etc.Complete. (Csi No. 27.01) , Providing And Fixing 10 Litres Low Level Pvc Flushing Cistern, Complete With All Fittings Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. (Csi No. 27.12) , Providing And Fixing 550X400 Mm Wash Hand Basin Of White Glazed Earthern Ware First Quality I.S.I. Marked (Hindustan,Neycer / Cera Make) Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.(Csi No. 27.08) , Providing And Fixing First Quality White Glazed Of European Type Hindustan, Cera Make With Out P Trap Including Supply Of All Materials,Labour And T&P Etc.Complete. (Csi No. 27.02) , Supply And Fixing Brass Polished Hydraulic Door Closure Of Approved Make & Quality Its Fixing And Adjustment With The Help Of Screws, Nuts And Bolts Including Supply Of All Labour, T & P Etc. Required For Proper Completion Of The Work. (Csi No. 8.57) , Supplying & Fixing 24 Gauge Annodized Aluminium Sheet Of Approved Quality Including Cutting, Wastage And Fixing The Same Over The Wooden Door Shutters With Nails With All Material, Labour And T&P. (Csi No. 8.60) , Repairing Of Mixture Toti For Hostels Bathroom With Labour, Material, T&P Etc. Equired For Proper Completion Of Work.(Nsi) , Supply And Fixing Of Syntex Or Equivalent Make Water Storage Tank Including All Materials, Labours, T&P Etc Required For Proper Completion Of Work. (Csi No. 26.12) , Providing & Fixing Half Turn 15Mm Dia Gate Valve, Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. (Csi No. 26.05) , Supply And Replacing Of L Drop 16Mm Diax300 Mm Long Chromium Polished Iron Fittings Including Cost Of Nuts, Bolts Etc.Complete.(Csi No. 20.17A) , Tower Bolts 10 Mm Dia X 250 Mm Long.(Csi No. 20.17B) , Aluminium Handles 150 Mm Size(Csi No. 20.17F) , Providing And Fixing Pvc Connection Pipe, 300X15 With 2 Brass Units Isi Mark Heavy Quality Including Supply Of All Materials, Labour And T&P Required For Proper Completion Of Work. (Csi No. 26.09) , Supply And Fixing Galvanised Mosquito Proof Jali (16X24 Gauge) With M.S. Flat Of 20 X 3 Mm. Size, On Both Sides Screwed Or Welded To Window Or Door Frame. (Csi No. 9.18) , Supply And Fixing 24 B.W.G , G.C. Iron Sheet Roofing .Fixed In Position With J Or U Bolts 10 Mm. Dia With G.I. Limpet & Bitumen Washers Including Supply Of All Materials, Labour,Wastage. And T&P Etc. Required For Proper Completion Of The Work. (Csi No. 10.01)