Tender For Welcome Maintenance Including Certain B&R Works In Omq Area At Afs Bareilly Under Ge (Af) Bareilly
Tender Value
30 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Including Certain B&R Works In Omq Area At Afs Bareilly Under Ge (Af) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc complete all as directed. |
| 2 | M&L for applying 2mm (average) thickness white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified. |
| 3 | M&L for applying two coats of oil bound distemper over one coat of primer on wall using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface all as specified.(Note :- The work shall be executed by authorised applicator of manufacturer of paints as approved by GE). |
| 4 | M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface all as specified and directed. (Note-: The work shall be executed by authorized applicator of manufacturer of Paints as approved by Garrison Engineer). |
| 5 | M&L for preparation of surfaces of wall by scrapping down old loose treatment, smoke soot, moulds, moss and efflorescent salt etc and applying three coats of white wash complete all as specified. |
| 6 | M&L for complete removal of existing treatment of ceiling by scrapping with mechanical sander (having mechanical vacuum mechanism), scrapping down old loose treatment, smoke soot, moulds, moss and efflorescent salt etc and applying three coats of white wash complete all as specified. |
| 7 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint first quality complete all as specified. |
| 8 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint first quality all as specified. |
| 9 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc including removal of debris from site to outsite MoD Land. |
| 10 | M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar (1:6) all as specified. |
| 11 | Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris from site to outsite MOD Land |
| 12 | M&L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces as on ceiling including finishing surface even and smooth without using extra cement all as specified. |
| 13 | M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces including finishing surface even and smooth without using extra cement all as specified. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding/ terrazo dado (but not backing) including removal of debris from site to outsite MoD Land |
| 15 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or all as specified. |
| 16 | S&F for 15 mm bore galvanized steel tubing medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified. |
| 17 | S&F in repair cast iron floor trap long neck type 100 mm bore of outlet without grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 18 | S&F in repair 100 mm bore cast iron (spun) soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor all as specified. |
| 19 | S&F in repair chromium plated grating 125 mm dia with or without hole including pointing in coloured cement to match with the colour of floor tile all as specified. |
| 20 | M&L for 25mm thick cement concrete 1:2:4 type, B-0 using 12.50 mm graded stone aggregate as in sub base for floor finishes all as specified |
| 21 | M&L for vitrified ceramic tiles 10mm thick first quality (square/ rectangular) nano polished single charged (light shade) area of each tile not exc. 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including screed bed or bedding layer 20mm thick in cement mortar 1:6 all as specified. [Note: The colour / shade / design of tiles shall be as approved by GE.] |
| 22 | All as per item No. 21.00 above but on vertical surface such as skirting, dado, walls etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10 mm thick rendering in cement mortar 1:4 all as specified. [Note: The colour / shade / design of tiles shall be as approved by GE.] |
| 23 | M&L for non skid coloured ceramic tiles of size 400 mm x 400 mm x 7-8mm thick first quality as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed in cement mortar (1:6) all as specified. |
| 24 | M&L for digital coloured light shade glazed ceramic tiles of size 300 mm x 600 mm x10 mm thick first quality as on vertical surface such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white and coloured cement to match the surface of tile with over 10mm thick rendering in cement mortar (1:4) complete all as specified. |
| 25 | M&L for Glazed ceramic coloured/printed tiles first quality of size 350 mm x 250x 7 mm/ 450X 350X 7mm thick on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CM 1:4 all as specified and directed. |
| 26 | S&F for 18 to 20 mm thick single piece perfect black granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of granite including rounding exposed edge and making hole for gas pipe all as specified and as directed. |
| 27 | S&F in repair 15mm dia bib taps long body, chromium plated with fancy head with or without lettered ‘Hot’ or “Cold” screwed down, screwed for iron pipe all as specified. |
| 28 | S&F in repair 15mm bore chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down, high pressure with or without lettered ‘Hot’ or “Cold” with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule all as specified. |
| 29 | S&F in repair 15 mm dia chromium plated brass wash hand basin mixer with swinging spout mark \\"Hot\\" and \\"Cold\\" complete all as specified and as directed. |
| 30 | S&F in repair 15 mm dia chromium plated brass wall mixer three-in-one with shower leg accessories with marking of Hot and Cold complete all as specified. |
| 31 | S&F in repair 15 mm dia chromium plated brass concealed type stop cock with long shank, cast copper alloy screwed down, high pressure, with crutch handle, screwed for iron pipe all as specified. |
| 32 | S&F in repair 15 mm dia chromium plated angle valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed for iron pipe complete all as specified. |
| 33 | S&F in repair PVC waste pipe with adopter in any length & 32 mm dia suitable for WHB or sink all as specified. |
| 34 | S&F in repair PVC connection 450mm long and 15 mm dia with chromium plated check nut and washers complete all as specified. |
| 35 | S&F in repair toilet paper holder chromium plated as approved quality all as specified. |
| 36 | S&F in repair chromium plated shower rose 50 mm size with chromium plated arm for 15mm dia pipe with swivel joints all as specified. |
| 37 | S&F in repair chromium plated Jet with flexible cord min 1.2 mtr long for EWC including fixing to steel pipe or union complete all as specified. |
| 38 | S&F in repair vitreous china squatting pan \\"Orissa pattern\\" of size 580 mm x 440 mm white with integral foot rests including cast iron \\"P' of S' trap and PVC flush pipe and making good to floor complete all as specified. |
| 39 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern but including PVC flush pipe & PVC sheet cover white with closed pattern and hinges device all as specified. |
| 40 | S&F in repair EWC seat cover closed pattern type for pedestal pattern white including chromium plated locking bolt all as specified. |
| 41 | S&F in repair vitreous china wash hand basin, white, flat back of size 550 mm x 400mm including CP waste coupling, PVC waste pipe & brackets complete all as specified. |
| 42 | S&F in repair push type PVC low level flushing cistern 10 Litres capacity with inlet ball valve, float and handle with and including brackets all as specified. |
| 43 | S&F for in repairs kitchen sink with drainage board made of 1 mm thick stainless steel overall size of 1000 mm x 460 mm bowl size 560 mm x 405 mm x 250 mm make as approved with coupling and waste pipe all as specified. |
| 44 | S&F in repair chromium plated towel rack with lower hanger 450mm long fixed with and including chromium plated brass screws and plastic cleats all as specified. |
| 45 | S&F in repair 250 mm dia towel ring round chromium plated including chromium plated brass screws and plastic cleats complete all as specified. |
| 46 | S&F for fancy type soap dish, chromium plated all as specified. |
| 47 | S&F in repair 5.50 mm thick looking mirror of size (600x450) mm approved quality fixed to walls with suitable stainless steel brackets and screws complete all as specified. |
| 48 | S&F in repairs corner shelf fancy type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug of size not less than 450mm as suitable for bath room as per manufacturer's instructions complete all as specified |
| 49 | S&F in replacement of rotational moulded polyethylene water storage tanks, three layer of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including necessary GI tank nipples all as specified. |
| 50 | S&F in repair PVC ball cock 20mm bore high pressure of PTMT with epoxy coated aluminium rod, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified. (Minimum weight -210gm) |
| 51 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) and fittings area exc 1.5 but not exc 4 Sqm each all as specified. |
| 52 | Taking down shutter from frame with fittings of area exc 1 Sqm but not exc 2 Sqm each all as specified. |
| 53 | Taking down shutter from frame with fittings of area not exc 1 Sqm each all as specified. |
| 54 | Taking down shutters from chowkats, resecuring, or easing & adjusting & refixing in same opening of area exc 1 Sqm but not exc 2 Sqm each shutter all as specified. |
| 55 | M&L for mild steel angles, bars, flats etc as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar articles conforming to Fe-490 grade-E-165 all as specified. |
| 56 | S&F in repair 19 / 20 mm thick block board, exterior grade with decorative choice lamination on both side for cupboards, lockers, cabinets etc with necessary anchoring complete all as specified. |
| 57 | S&F in repair 12 mm thick block board, exterior grade with decorative choice lamination on both side for cupboards, lockers, cabinets etc with necessary anchoring fixed in repair complete all as specified . |
| 58 | M&L for 0.90 mm thick decorative laminate type-1 of surface finish, coloured and pattern as approved fixed with approved adhesive as per manufacturer's instructions all as specified. |
| 59 | M&L for 35 mm thick factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on one side and one face is covered with decorative face veneer with lipping/frame to match complete all as specified. |
| 60 | M&L for second class hard wood glazed and skeleton door shutter 35 mm thick, open rebated and prepared to receive glass, gauze etc fitted with cut and mitred beads for securing glass, gauze etc for door shutters; sizes of members of shutters as specified in SSR Part-I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified. |
| 61 | S&F for 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Part-I Section 8, clause 8.24 (b) complete all as specified. |
| 62 | S&F for factory made solid panel wood grain printed PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified. |
| 63 | S&F for wood grain printed solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified. |
| 64 | M&L for preparation of newly wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified. |
| 65 | S&F for 125 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked all as specified. |
| 66 | S&F for 100 mm long stainless steel butt hinges with SS hinge pin ISI marked all as specified. |
| 67 | S&F for 75 mm long medium weight, cold rolled mild steel butt hinges ISI marked all as specified. |
| 68 | S&F for continuous (piano) hinges, bright finish, mild steel 30mm each flaps (when open) all as specified. |
| 69 | S&F for 150 mm long aluminium, anodized, barrel tower bolts of extruded section ISI marked all as specified. |
| 70 | S&F for 100 mm long aluminium, anodized, barrel tower bolts of extruded section ISI marked all as specified. |
| 71 | S&F in repair 300 mm mild steel ordinary door springs, ISI marked including roller and roller plate complete all as specified. |
| 72 | S&F for 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy all as specified. |
| 73 | S&F in repair 140 mm long floor door stopper brass body and tongue with hard drawn steel spring, fixed in floor all as specified. |
| 74 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified. |
| 75 | S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square in not exc 0.50 Sqm in each pane. |
| 76 | S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified. |
| 77 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples all as specified. |
| 78 | S&F in repair 40 mm dia cupboard knobs fixed with nut screws of brass bright all as specified. |
| 79 | S&F in repair ball catches with 8 mm dia steel ball and brass body suitable for cupboard and striking plate including letting in and fixed complete all as specified. |
| 80 | S&F in repair 25 mm dia CP curtain rod with fixing brackets, stops, rollers etc complete all as specified. |
| 81 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings including cleaning (measured overall as fixed along the centre line over fittings and accessories) all as specified. |
| 82 | S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including mild steel clamps complete all as specified. |
| 83 | S&F for PVC (SWR) bends any radius of 110 mm bore all as specified. |
| 84 | S&F in repair stainless steel wall hanger set of six not less than 450 mm long approved shape and design all as specified. |
| 85 | S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe & fixed all as specified. |
| 86 | S&F in repair Mortice lock, brass, 2 levers, vertical type, size 65 mm all as specified. |
| 87 | S&F in repair cylindrical lock, brass finish SS finish with computer key compete all as specified. |
| 88 | S&F in repair 125 mm dia grating doom with or without waste hole of PTMT (minimum weight 40 gram) complete all as specified. |
| 89 | S&F in repairs chromium plated health faucet with hand shower & flexible cord minimum 1.2 mtr for EWC including fixing to steel pipe or union complete all as specified. |
| 90 | S&F in repair vitreous china half stall urinal wall type including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe. (complete all as specified. |
| 91 | S&F in repair internal kit for PVC flushing cistern of 10 Ltr capacity, concealed type all as specified. |
| 92 | S&F in repair internal kit concealed type PVC flushing cistern of 10 ltr capacity, embedded in wall including CP face plate all as specified and directed. |
| 93 | S&F in replacement of rotational moulded polyethylene water storage tanks, three layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples all as specified. |
| 94 | S&F for 5.50 mm thick sheet glass (tinted/ reflective type) in square each pane including rubber beading, cleat all as specified. |
| 95 | S&F in repair PVC cabinet of size 355 mm X 455 mm with 5.5 mm thick looking mirror, sliding type, approved quality, fixed to walls with stainless steel screws all as specified. |
| 96 | S&F in repair stainless steel plate rack of size 36 inch X 31 inch X 10 inch made of 1 mm thick stainless steel sections all as specified. |
| 97 | S&F in repair 25 mm wide aluminium door seal with gasket complete all as specified. |
| 98 | M&L for cleaning of PVC service tank of capacity 500 ltrs located at various places at any height by removing the inlet and outlet coupling connections, cleaning and removing all dirty/muddy water from the service tank, removing mud deposited on the tank floor, including scrapping all the scale formation using hard scrubbers, broom etc, cleaning uinside surfaces using bleaching powder, writing the details of tanks like date of cleaning, capacity of tanks and due date for next cleaning etc on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over yellow background of size 60 cm x40 cm including cleaning of bottom surfaces of platform, replacement of unserviceable/defective inlet and outlet coupling and fittings etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender