Tender For Special Repairs To Fafa Block 5 (Qtrs 3 To 6) And Bldg No Lix At Mh Wellington Under Ge Wellington 8202/E8
Tender Value
46.30 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
5 days left
EMD
92600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Fafa Block 5 (Qtrs 3 To 6) And Bldg No Lix At Mh Wellington Under Ge Wellington 8202/E8
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick, concrete or stone walls or ceiling including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish off all as specified and as directed. |
| 2 | Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, in ceiling of chajjas/ roof projection, etc finished even and smooth without using extra cement all as specified and directed |
| 3 | Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 in walls finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed. |
| 5 | Demolition of Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm /350 x 250 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:3 on fair face of brick or concrete surface complete all as specified and directed. |
| 7 | Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 8 | Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:6 complete all as specified and as directed. |
| 9 | Coloured Non - skid Ceramic joint free tiles 7 to 8 mm (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting / dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick as backing coat in cement mortar 1:4 complete all as specified and as directed. |
| 10 | Taking down PVC/ wooden chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed. |
| 11 | Taking down PVC / wooden chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr all as specified and directed. |
| 12 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet and edges will be printed to mactch with printed sheet, reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed. |
| 13 | Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing. |
| 14 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extrudedprofiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 15 | Providing and fixing factory made UPVC white colour Sliding window Three track, Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ((+) or (-)0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+) or (-)0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2 SqmNote: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose. |
| 16 | Providing and fixing factory made UPVC white colour Sliding window Three track, Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ((+) or (-)0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+) or (-)0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area exceeding 2 SqmNote: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose. |
| 17 | Toughened glass 5.0mm thick of selected quality, fixing to the frame any type all as specified and directed. |
| 18 | Taking down Shutter of any description exceeding 1 sqm but not exceeding 2sqm each all as specified and directed. |
| 19 | Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings, framework of water tanks and simialr work conforming to Fe290 Gde E-165 all as specified and directed. |
| 20 | Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 21 | Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed |
| 22 | 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 23 | Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed. |
| 24 | Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed. |
| 25 | Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed. |
| 26 | Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor including fixed in repairs all as specified and as directed. |
| 27 | 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed. |
| 28 | Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm and refixing in the same opening each all as specified and directed. |
| 29 | 35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on one faces with lipping / frame on one faces, complete all as specified and as directed. |
| 30 | Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed. |
| 31 | Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 32 | Demolition of cement Concrete reinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed. |
| 33 | Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work complete all as specified and directed. |
| 34 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed. |
| 35 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 36 | Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately. |
| 37 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed. |
| 38 | 20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. |
| 39 | 40mm dia light grade PVC pipe at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed. |
| 40 | Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, in sunken portion complete all as specified and directed. |
| 41 | Demolition and breaking up drain pipe any description of size 100mm complete all as specified and directed. |
| 42 | PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 43 | PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. |
| 44 | PVC (SWR) 110mm dia bore pipe single socketed in any length, with rubber ring joint fixed to walls with PVC clamps complete all as specified and directed. |
| 45 | PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with PVC clamp, complete all as specified and as directed. |
| 46 | PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed. |
| 47 | PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed. |
| 48 | PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed. |
| 49 | PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed. |
| 50 | PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed |
| 51 | PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed |
| 52 | PVC (SWR) branch piece double, (double Y) equal or un equal of 75mm bore of pipe complete all as specified and directed |
| 53 | Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified. |
| 54 | Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified. |
| 55 | PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed |
| 56 | PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed |
| 57 | Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 58 | Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed |
| 59 | Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, fixed in repairs complete all as specified and directed. |
| 60 | Taking up or down steel tubing and connections for 15mm dia and connections including cleaning for refixing or removing from site all as specified and directed |
| 61 | Taking up or down steel tubing and connections for 20mm dia and connections including cleaning for refixing or removing from site all as specified and directed |
| 62 | Supply, laying and testing steel water tubing of size 15 mm bore medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified. |
| 63 | Supply, laying and testing steel water tubing of size 20 mm bore medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified. |
| 64 | Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed. |
| 65 | PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed. |
| 66 | Vitreous chian wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed. |
| 67 | Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed |
| 68 | Stop valves, fancy type, 15mm bore chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed |
| 69 | Stop valve cast copper alloy, 15mm bore screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed |
| 70 | PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed. |
| 71 | Chromium plated 125mm shower rose with or without swivel joint, any size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed. |
| 72 | Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete fixed in repairs all as specified and directed. |
| 73 | Sheet Glass shelves assembly corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long and fixed in repairs complete all as specified and directed. |
| 74 | Supply and fix in repairs of Chromium plated soap dish complete all as specified and directed. |
| 75 | Supply and fix repairs of brass chromium plated tubular towel ring 20mm dia, D type 60cm long complete all as specified and directed. |
| 76 | PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed. |
| 77 | Gratings 125mm dia with / without waste hole, fixed in repairs complete all as specified and as directed. |
| 78 | Preparation of old decorated plastered or unplastered surface of ceiling by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coats of white wash on ceiling complete all as specified and directed. |
| 79 | Preparation of old decorated plastered or unplastered surface of walls by brooming down or steel wire brushing scraping down smoke spots, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and directed. |
| 80 | Complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Emulsion Distemper (washable) over a coat of primer (water thinable/ solvent thinable), over one coat of white wall care putty even and smooth complete all as specified and directed. |
| 81 | Applying one coat of sythentic enamel painting on old steel painted sufaces including prearation of surfaces10 cm width or girth all as specified and as directed. |
| 82 | Preprtion of old wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 83 | 600 mm x 450 mm bevelled edges looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete fixed in repairs all as specified and as directed. |
| 84 | Anodised aluminium curtain rod fixing with brackets all as specified and directed. |
| 85 | Stainless steel plate rack of size 0.9m X 1.2m as approved complete all as specified and as directed. |
| 86 | Acid resistance lead free ceramic tiles in vertical surfaces 25mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:4 on fair face of brick/stone or concrete surface complete all as specified and directed. |
| 87 | Acid resistance lead free ceramic tiles 25mm thick in floors etc. (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick plaster as backing coat in cement mortar 1:4 on fair face of brick/stone or concrete surface complete all as specified and directed. |
| 88 | Vitrified Ceramic tile 10mm thick, Light shade (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 89 | Demolition of Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work in which cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 90 | Steel reinforcement for concrete with Mild steel TMT bars 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed. |
| 91 | Reinforced cement concrete Type A1, (1:1:5:3), using 20mm graded stone aggregate for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 92 | Reinforced cement concrete (1:1:5:3) type A1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 93 | 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigmet to match with shade of granite complete all as specified and directed. |
| 94 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and frame work all as specified and directed. |
| 95 | GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed. |
| 96 | Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed. |
| 97 | Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat of 3mm thick putty including preparation of surfaces complete all as specified and as directed. |
| 98 | Fatory made UPVC white colour fixed glazed ventilator made of (small series) frame 47x50mm mullion 47x68mm both having wall thickness of 1.9± 0.2mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drillng of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quiality, all complete as per approved drawing and all as specified and directed. |
| 99 | Factory made uPVC white colour casement door with 3D hinges made of (big series) frame 67x64mm and sash 67x110mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead/ bouble glazing bead of appropriate dimention. (Area of door upto 2.00 Sqm) comprising of uPVC multi-chambered frame sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile) uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drinage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and approved quality complete all as specified and directed. |
| 100 | Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane thick of selected quality, fixing to the frame any type all as specified and directed. |
| 101 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed. |
| 102 | Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in PVC casing and caping complete with fittings / accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/ Ex-fan point controlled by one switch 5 Amps SP all as specified and directed.Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.2. Cutting chases in stone masonry wall will be measured and paid separately. |
| 103 | All as per Item No.102 hereinbefore but One light point controlled by two way switches, with cable 1.5 Sqmm size all as specified and directed. |
| 104 | All as per Item No.102 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed. |
| 105 | All as per Item No 102 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed |
| 106 | All as per Item No 102 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed. |
| 107 | All as per Item No.102 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed. |
| 108 | Bell Multi Music type 230 volts single pole all as specified and directed. |
| 109 | Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed. |
| 110 | Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed. |
| 111 | Modular switch two way 6A 230V AC 50 HZ SP one module all as specified and directed. |
| 112 | Modular bell push switch 6A 230V AC 50 HZ SP one module all as specified and directed. |
| 113 | Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed. |
| 114 | Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed. |
| 115 | Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed. |
| 116 | Modular Metal Flush Box 1/2 module rectangular block for mounting, switches, sockets, fan regulator all as specified and directed. |
| 117 | Modular Metal Flush Box 3 module rectangular block for mounting, switches, sockets, fan regulator all as specified and directed. |
| 118 | Modular Metal Flush Box 4 module rectangular block for mounting, switches, sockets, fan regulator all as specified and directed. |
| 119 | Modular Metal Flush Box 6 module rectangular block for mounting, switches, sockets, fan regulator all as specified and directed. |
| 120 | Modular White Cover Plate with Frame 1 module all as specified and directed. |
| 121 | Modular White Cover Plate with Frame 2 module all as specified and directed. |
| 122 | Modular White Cover Plate with Frame 3 module all as specified and directed. |
| 123 | Modular White Cover Plate with Frame 4 module all as specified and directed. |
| 124 | Modular White Cover Plate with Frame 6 module all as specified and directed. |
| 125 | Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. |
| 126 | Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles neutral and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 127 | All as per item No. 126 hereinbefore but SP 240V, 6 to 32 Amps capacity all as specified and directed. |
| 128 | Taking down old unsv FTL fittings, Supply and fix 25W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed.Make. Havells Cat Part No. LHEXAWPN7IN1W025 or equivalent make in CG/ Philips / Bajaj. |
| 129 | Taking down old unsv FTL fittings, Supply and fix 12W LED Surface panel light colour white all as specified and directed.Make. Lucker Cat Part No. LNPSRR12 or equivalent make in CG/ Philips / Bajaj. |
| 130 | Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXACP5IN1W010 / Philips/CG/Orpit |
| 131 | Taking down old unservicable indoor wall light fitting, supply and fixing of suitable size complete all as specified and directed. Make - HAVELLS Cat Part No- LHFOFWE1TZ1W012 / Philips/CG/Orpit |
| 132 | Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 10A SP MCB all as specified and directed. |
| 133 | Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC casing and caping with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM |
| 134 | Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.Note: 3 runs of cable and one run of conduit pipe together measured as one RM |
| 135 | Cutting chases in Brick/ stone masonry wall for laying GI pipe or concealed conduit wiring and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed. |
| 136 | Supply and fix exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers including making opening brick/ ston masanory wall as per requirement of Exhaust fan and make good and matching with existing surface complete all as specified and directed. |
| 137 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making openeing brick/ stone Masaonary Wall as per reqiurement of Exhuast Fan and make good and matching with existing surfaces complete all as specified and directed. |
| 138 | Taking out unsv heating element and supply and fix new heating element 1.5 KW Dual clip type with rubber gasket suitable for geysers up to 25 Ltr capacity all as specified and directed. |
| 139 | Taking out unserviceable Copper Drum and supply and fix new Copper Drum suitable for geyser upto 25 Ltr Capacity all as specified and directed. |
| 140 | Schedule of Credit (Minus) Rs. 23720.00 NOTE: Bidder shall insert credit amount of Rs. 23720.00 as rate in Green field under Col-5. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender