Tender For Special Repair To Building No P 101, Provision Of Hard Standing And Addition Alteration To Bldg No T 2976 Under Age B/R I At Chandimadir
Tender Value
27.60 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
18 days left
EMD
55200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P 101, Provision Of Hard Standing And Addition Alteration To Bldg No T 2976 Under Age B/R I At Chandimadir
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part I (B/R Work)Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed. |
| 2 | Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 4 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge |
| 5 | 100mm size, butt hinges, medium weight, stainless steel cmplete all as specified and directed. |
| 6 | 150 mm Extruded aluminum alloy handles (D type), fabricated type complete all as specified and directed |
| 7 | 150mm aluminium alloy barrel tower bolts of extruded section, complete all as specified and directed. |
| 8 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 9 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.NOTE : Glass will be mesured and paid sepreately |
| 10 | Powder coated decorative aluminium grill (minimum thickness of powder coating 50 micron) of approved design / pattern (aperture of grill should not be more than 75mm) with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening , including aluminium ‘U’ channel and all necessary fitting complete all as per requirement of Engineer-in-Charge. |
| 11 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples, complete all as specified & directed. |
| 12 | 4.80mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n. exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 13 | 4.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 14 | Mortice lock, verticle type, mild steel, 2 levers, size 75mm , complete all as specified and directed |
| 15 | Door closer hydraulically regulated aluminum (die cast) body, designation No 2, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, fixed complete all as specified and directed. |
| 16 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of hollow frame in PCC 1:3:6, type C-1 complete all as specified and directed. |
| 17 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of hollow frame in PCC 1:3:6, type C-1 complete all as specified and directed. |
| 18 | Factory made flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 19 | Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated,complete all as specified & directed. |
| 20 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed. |
| 21 | Aluminum alloy, anodized, sliding door bolt 300mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 22 | 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 23 | 25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 24 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 25 | Applying one coat of synthetic enamel paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed. |
| 26 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 27 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 28 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 29 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 30 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 31 | Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 32 | All as per serial item No 31 here-in-above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 33 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 34 | Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 35 | Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete, all as specified and directed. |
| 36 | Dubbing out average 20mm thick on irregular faces of walls, exposed reinforced surfaces upto 15 metre height, in Cement and Sand mortar 1:4 complete all as specified and directed |
| 37 | 5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 38 | Preparation of new plastered ceiling surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 39 | Preparation of old plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed. |
| 40 | Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified. Note : WPC shall be measured and paid separately. |
| 41 | Supply only liquid water proofing compound complete all as specified & directed. |
| 42 | Preparation of new surfacs and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 43 | Preparation of new surfacs and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and directed.NOTE for serial item No 42 & 43 :(i) Acrylic exterior paint shall be done by authorised applicator(ii) All necessary scaffolding, safety equipment and all other tool & material shall be inclusive in rate quoted againt these items |
| 44 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete, all as specified and directed. |
| 45 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 46 | Preparation of newly plastered wall surfaces and applying two coats of oil bound over a coat of chalk whiting complete all as specified and directed. |
| 47 | Preparation of old plastered wall surfaces and applying two coats of oil bound complete all as specified and directed. |
| 48 | PVC (SWR) Nahani traps/ floor trap 75mm dia with grating including jointing to waste pipe and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 49 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 50 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including SS waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 51 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 52 | PVC connection 15 mm size with PTMT nuts of length 600 mm , fixed as in repair complete all as specified and directed. |
| 53 | Stainless steel Towel rail 600mm long of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 54 | Stainless steel Towel ring of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed. |
| 55 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 56 | 20 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified including taking down of existing GI pipe of 15 mm bore complete all as specified and directed. |
| 57 | 25 mm (outer dia) CPVC pipes, SDR 11 and Plain CPVC SDR 11 fittings, fixed on walls/ceiling or laying in floors, complete all as specified including taking down of existing GI pipe of 20 mm bore complete all as specified and directed. |
| 58 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed. |
| 59 | Brass elbow 25mm outer dia for CPVC pipe complete all as specified and directed. |
| 60 | Brass elbow 20mm outer dia for CPVC pipe complete all as specified and directed. |
| 61 | Brass Tee 20mm outer dia for UPVC pipe complete all as specified and directed. |
| 62 | Male Brass Threaded Adaptor 20mm outer dia (MTA/ MTA) ) for CPVC pipe complete all as specified and directed. |
| 63 | Female Brass Threaded Adaptor (FTA/ MTA) 20mm outer dia for CPVC pipe complete all as specified and directed. |
| 64 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. |
| 65 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 66 | Stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 67 | 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, fancy type as in repair complete all as specified and directed. |
| 68 | Corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass, corner shelf, 300mm radius with chromium plated bracket guard and railing, including fixing at site, fixed as in repair complete all as specified and directed. |
| 69 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed |
| 70 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 71 | PVC (SWR) pipes, single socketed, of pressure rating 6 kgf/cm2 in any length with rubber ring joints, laid in trenches, floor etc, 110 mm bore, in any length, including cutting/ boring of brick/ concrete wall/ slab wherever required and making good of the surface complete all as specified and as directed by engineer-in-charge. Note:-(i) Smoke test shall be carried out to check the leakage at joints.(ii) Joint of pipe with RCC slab (in case of floor trap/ ‘P’ trap shall be water sealed with crack repair component of Dr fixit of equivalent. Cost of the shame shall deemed to be included in the rate quoted against this item |
| 72 | PVC (SWR) bends with access door of any radius, pressure rating 6 kgf/cm2, for 110 mm bore pipe complete all as specified and as directed. |
| 73 | PVC (SWR) junction (Single T) equal or unequal with access door for 110 mm bore pipe,of pressure rating 6 kgf/cm2 fixed as in repair complete all as specified and directed. |
| 74 | PVC (SWR) pipes, single socketed, of pressure rating 6 kgf/cm2 in any length with rubber ring joints, laid in trenches, floor etc, 75 mm bore, in any length, including cutting/ boring of brick/ concrete wall/ slab wherever required and making good of the surface including excavation and RFR complete all as specified and as directed by engineer-in-charge. Note:-(i) Smoke test shall be carried out to check the leakage at joints.(ii) Joint of pipe with RCC slab (in case of floor trap/ ‘P’ trap shall be water sealed with crack repair component of Dr fixit of equivalent. Cost of the shame shall deemed to be included in the rate quoted against this item |
| 75 | PVC (SWR) bends with access door of any radius, pressure rating 6 kgf/cm2, for 75 mm bore pipe complete all as specified and as directed. |
| 76 | PVC (SWR) junction (Single T) equal or unequal with access door for 75 mm bore pipe,of pressure rating 6 kgf/cm2 complete all as specified and directed. |
| 77 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 78 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender