Tender For Provision Of Shed Near Veer Yodha Dwar, Partitions In Asi And Addition Alteration Of Gate At Gyaniti, Shed With Cetain Other B/R Items In No 2 Coy At Subathu Under Ge Kasauli .
Tender Value
28.98 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
7 days left
EMD
57960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Shed Near Veer Yodha Dwar, Partitions In Asi And Addition Alteration Of Gate At Gyaniti, Shed With Cetain Other B/R Items In No 2 Coy At Subathu Under Ge Kasauli .
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I |
| 2 | Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed. |
| 4 | Material and labour for broken stone hard core of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 5 | Material and labour for 100 mm thick cement concrete 1:2:4, type B1 (using 20mm graded agg) as in path etc finished even and smooth w/o using extra cement. |
| 6 | Excavation over areas not exceeding 1.50 metre deep and getting out in hard/dense soil complete all as specified and as directed. |
| 7 | Material and labour for plain cement concrete 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation filling and mass concrete, complete all as specified and directed. |
| 8 | Material and labour for cement concreteType C2 1:3:6 (40 mm graded stone aggregtes) in surface channels and drains complete all as specified |
| 9 | Supply and fixing for Rolled sections as in main post and cross beams, hip and jack rafters; purlins Fe-410-W(Gde-E-250)quality-B where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 10 | Supply and fixing for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410W (Gde Fe 250 quality B) with riveted, bolted or welded attachment complete all as specified and directed. |
| 11 | Supply and fixing roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position,conforming to Fe-410(Gde 250), complete all as specified and as directed. |
| 12 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 13 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed.Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 14 | Material and labour for two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed. |
| 16 | Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in soft/disintegrated rock complete, all as specified and as directed. |
| 17 | Material and labour TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 18 | Material and labour TMT bars, 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed. |
| 19 | Material and Labour for form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work rough finished flat surfaces of concrete complete all as specified and as directed. |
| 20 | Material and Labour for form work to sides of columns, pillars, posts, struts, etc. for rough finished surfaces of concrete complete all as specified and as directed. |
| 21 | Material and Labour for form work chulla hoods, chajjas, troughs and similar items including edges for fair finished surface of concrete, complete all as specified. |
| 22 | Material and Labour for formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified. |
| 23 | Material and labour for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) as in foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed. |
| 24 | Material and labour for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) as in columns, pillars, posts, etc. complete all as specified and as directed |
| 25 | Material and labour for reinforced cement concrete (design mix) M-20 (using 20mm graded mechanically crushed stone aggregates) as in chajjas, complete all as specified and directed. |
| 26 | Material and labour for providing reinforced cement concrete (design mix) M-20 (using 20mm graded mechanically crushed stone aggregate) in beams, cantilevers, lintels over 1.50m span, complete all as specified and directed. |
| 27 | Material and labour for brick work with sub class ‘B’ bricks burnt, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified |
| 28 | Material and labour for plain cement concrete, 1:2:4 type B-1 (using 20 mm graded mechanical crushed aggregate) for levelling course, benching, coving, roof kerbs complete all as specified and directed. |
| 29 | Supply and fixing framed work such as as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, angle iron chowkats for door ,barred iron doors, ladders framed balusters, walk ways, railings, in hung shutter,gates including pintle hinges, stops,hand-made sliding door bolts, grills, gratings, etc. and similar work conforming to Fe-290.Gde-E-165, complete all as specified and directed. |
| 30 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil of any description, complete all as specified and as directed.. |
| 31 | Removing excavated soil to a distance exceeding 250 metre and not exceeding 500 metre and deposited where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed. |
| 32 | Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc. complete, all as specified and directed. |
| 33 | Material and labour for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified. |
| 34 | Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified. |
| 35 | Material and labour for two coat of cement base paint over a coat of primer over newly plastered surface including preparation of surface complete all as specified and directed |
| 36 | Material and Labour for preparation of new steel surfaces of any description not otherwise described, not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint on steel surfaces over a coat of red oxide primer , complete all as specified. |
| 37 | Supply and fixing mild steel, plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections conforming to Fe-410(Gde 250), complete all as specified and as directed. |
| 38 | Supply and fixing for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290-Gde E-165, complete all as specified and as directed. |
| 39 | Supply and fixing of factory made steel windows with side hung shutter including projecting type hinges (with 10 mm dia Mild Steel handle of 125 mm size-01 No., MS stove enameled black tower bolts of size 100 mm-02 No. for each shutters) & mild steel peg stay complete with glazing bars, dovetailed on welded with one shop coat of red oxide primer, complete all as specified and as directed. |
| 40 | Supply and fixing of factory made steel windows with side hung shutter including projecting type hinges (with 10 mm dia Mild Steel handle of 125 mm size-01 No., MS stove enameled black tower bolts of size 100 mm-02 No. for each shutters) & mild steel peg stay complete without glazing bars, dovetailed on welded with one shop coat of red oxide primer, complete all as specified and as directed. |
| 41 | Supply and fixing Factory made pressed steel frames of size 105 x 60 mm for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming complete ,all as specified and as directed. |
| 42 | Material and Labour for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded mechanically crushed stone aggregates) as in filling of door frame, complete all as specified and directed. |
| 43 | Supply and fixing factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified. |
| 44 | Supply and fixing extruded aluminum alloy handle, anodized 150 mm long, fabricated type complete all as specified and directed. |
| 45 | Supply and fixing 200 mm mild steel barrel tower bolt, ISI marked, stove enameled black with bright bolt and fixed, complete all as specified and directed. |
| 46 | Supply and fixing 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. |
| 47 | Supply and fixing mild steel butt hinge of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed. |
| 48 | Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 49 | Supply and fixing galvanized steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and as directed. |
| 50 | Material and labour for forming dovetailed cavities, n exc 10cm x 10cm at top and 20cm x 20cm at bottom in concrete cast-in-situ (plain or reinforced) for holding down bolts, etc. for machinery, stanchions, etc. including temporary forms or moulds and carefully grouting round bolts (after fixing) with cement concrete type B1, 1:2:4 (20mm graded aggregate) or cement mortar 1:3, as directed complete all as specified and as directed . |
| 51 | Material and labour for PCC 1:2:4 Type B2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed. |
| 52 | Material and labour for cutting channels, grooves or rebates n exc 15cm girth, and trimming surface, with or without reinforcement complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 54 | Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified. |
| 55 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of primer over a coat of birla wall care putty , complete all as specified. |
| 56 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller over over 1mm thick wall care putty white cement based in two or more coats to achive smooth surface over prepared surface complete all as specified and as directed. |
| 57 | Supply and fixing for sheet glass 4mm thick, ordinary quality , in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified. |
| 58 | Excavating in post holes (or similar holes) in soft/ disintegrated rock each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified |
| 59 | Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed. |
| 60 | Material and labour for Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 61 | Supply and fixing for 2 mm thick coloured Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap/plain sheeting fixed with coach screw and washer in roof, wall, view cutter etc complete all as specified and as directed. |
| 62 | Amount of credit of Rs. 6785.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender