Tender For Petty Electrical And Mechanical Repairs To Md Accommodation & Otm Accommodation Under Age E/M-Ii Of Ge (N) Mamun.
Tender Value
15 Lakhs
Estimated cost
Bid Submission
08 Aug 2026
18 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Petty Electrical And Mechanical Repairs To Md Accommodation & Otm Accommodation Under Age E/M-Ii Of Ge (N) Mamun.
BOQ
| Sl. No. | Item Description |
| 1 | Repair, maint and making the continuity of supply after rectifying the minor defects of the electrical fitting/ accessories such as switches, sockets, distribution boards, MCB (light/power), lamp holders , bel, push button, ceiling rose lamp, plug top and other similar electrical items/fittings etc. including providing of small pieces of electrical wire copper conductor of size 1.5 sqmm to 10 sqmm single core and length not exceding 0.50 mtrs where required and all types of screws, nuts, bolts & washers if required at site complete all as specified and directed. Note :- (i) Any accessories found unserviceable that shall be supply and paid under respective items of this BOQ (ii) Contractor/ superviser of contractor will collect complaint slip on daily morning from MES complaint cell and deposit the same after rectify on next day morning (iii) Complaint slip book, registers as per sample will be provided by the contractor. (iv) Wire/ cable more than 0.5 Mtr if required will be paid under respective of BOQ. |
| 2 | Supply only cable PVC insulated unsheathed with flexible multistranded copper conductor single core of size 3 X 1.5 Sqmm. |
| 3 | All as per item No 2 above but size 2.5 Sqmm. |
| 4 | All as per item No 2 above but size 4.0 Sqmm. |
| 5 | All as per item No 2 above but size 6.0 Sqmm. |
| 6 | Supply only for switch piano flush button single pole one way 5 amps 240 volts all as specified and directed. |
| 7 | Supply only for switch socket combination 2 in 1, 5 Amp flush type, 240 Volts compete all as specified and directed. |
| 8 | Supply only for switch socket combination 5 in 1, 5 Amp and 15 Amp flush type, 240 Volts compete all as specified and directed. |
| 9 | Supply only for socket outlet, 3 pin 5 Amp flush type, 240 Volts compete all as specified and directed. |
| 10 | Supply only for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 240 volts. |
| 11 | Supply only for switch piano flush button single pole one way 15 amps 240 Volts. |
| 12 | Supply only for bell push flush button single pole one way 5 amps 240 volts. |
| 13 | Supply only for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified and directed. |
| 14 | Supply only for switch piano flush button single pole two way 5 amps 240 volts. |
| 15 | Supply only for ceiling rose surface bakelite 3 terminals PVC/Polycarbonate insulated body 65mm dia. |
| 16 | Supply only stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. all as specified and directed. |
| 17 | Supply only Lamp holder insulated body with back plate for dome batten fittings. |
| 18 | Supply only LED lamp 12 Watt suitable for fixing in lamp holder all as specified and directed. |
| 19 | Supply only plug top 2 pin and earth plug and socket of metal plug, 20 Amp with 20 Amp MCB SPN, 240 Volts complete all as specified and directed. |
| 20 | S&F for SPN MCB DB 8 way sheet metal enclosures double door 230V AC, 50 Hz AC with IP 43 and IK 09 for comperising MCB rating having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 21 | All as per item No 20 above but 4 Way DB 230V with 200 A rated busbar. |
| 22 | All as per item No 20 above but 12 Way DB 230V with 200 A rated busbar. |
| 23 | S&F for TPN MCB DB 4 way sheet metal enclosures double door 415V AC, 50 Hz AC with IP 43 and IK 09 rating for comperising MCB having fully insulated copper busbar, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 24 | S&F in replacement for VTPN MCB DB 4 way sheet metal enclosures double door 415V AC, 50 Hz AC with IP 43 and IK 09 rating for comperising MCB having fully insulated 200 Amps copper busbar, neautral bar including MCCB 160 Amp four pole 16 KA with fixed magnetic and therm at setting, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 25 | Supply and fixing of MCB TPN 40 Amps 3 Pole 415 Volts C Curve, 50 Hz, 10kA breaking cap with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 26 | Supply and fixing of MCB SPN 06 to 32 Amps 230V C Curve, 50 Hz, 10kA breaking cap with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 27 | Supply and fixing of MCB SP 06 to 32 Amps 230V C Curve, 50 Hz, 10kA complete all as specified and directed. |
| 28 | Supply and fixing in replacement 20W, not less than 3.7' long, energy efficient surface / wall mounted box type batten LED batten luminire fitting having polycarbonate housing and diffuser and integrated electronic driver complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 29 | Supply and fixing in replacement LED flat panel 1'x4', panel 36 W, 220 V AC recessed/surface type having white powder coated CRCA housing and high quality diffuser for glare free light with driver and mounting clips suitable for POP/gypsum ceiling and connecting up suitable size flexible copper conductor cable incl making good the disturbed POP surface complete all as specified. |
| 30 | Supply and fixing in replacement surface mounted, bulk head LED luminaire 10 W box type LED batten as mirror light with and integrated electronic driver, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable 3 core from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 31 | S & F in replacement of LED post top lantern 35/40 Watt warm white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection including fixing of GI pipe of suitable dia dia, 300 mm long light grade, partly embedded on column of gate with fixing arrangement complete and making electrical connection complete all as specified. |
| 32 | S&F in replacement 35/36 watt LED 2'x2' flat panel, 230 V AC recessed type having white powder coated CRCA housing and high quality diffuser for glare free light with driver and mounting clips suitable for POP/gypsum ceiling and connecting up suitable size flexible copper conductor cable incl making good the disturbed POP surface complete all as specified. |
| 33 | S&F in replacement surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 34 | Supply and fixing in replacement LED 18 watt surface mounted round/square shaped rimless downlight panel having polycarbonate housing, high quality PC diffuser for glare free light with separate driver, CRI>80, BEAM ANGLE 120' and mounting arrangement suitable for surface/roof mounting including connecting up suitable size flexible copper conductor cable complte all as specified and directed. |
| 35 | S&F in replacement LED wall security lights of 60 Watt having pressure die cast aluminium housing, IP65 protection, IK07 rating, inbuilt electronic driver incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 36 | Supply and fixing in replacement plastic laminated top sheet cover 3 mm thick of size 7\\"x4\\" all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box. |
| 37 | All as per item No 36 above but of size 8\\"x5\\". |
| 38 | All as per item No 36 above but of size 11\\"x9\\". |
| 39 | All as per item No 36 above but of size 4\\"x4\\". |
| 40 | Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 24,877.00 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender