Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #56564803

Tender For Provision Of Certain Minor And Revenue Works Under Age B/R-I At Ge Gurdaspur.

Issued by Statutory Bodies & Commissions/Committees · Gurdaspur, Punjab
Tender Value
31 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
17 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Provision Of Certain Minor And Revenue Works Under Age B/R-I At Ge Gurdaspur.= 1 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surface In Any Type Of Soil Complete All As Specified And Directed. 2 Removal Of Excavated Soil To A Distance Not Exceeding 50 Mtrs And Depositing Where Directed At A Level Not Exceeding 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. 3 M&L For Pcc 1:3:6 Type C-2 (Using 40 Mm Graded Crushed Stone Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. 4 S&F Of Rolled Mild Steel Gde Fe-410-W Gde E-250 Quality-A In Roof Trusses (Framed), Trussed, Purlins Crane Gantries, Joist, Channel, Steel Tube, Rails, Fastenings & Heavy Brackets Framimg (Beam, Tee, Angle, Coulmn, Gusset Plates, Channel, Hollow Square/Rectangular Or Flat Section) Including Distance Pieces, Cleats With Riveted, Bolted Or Welded Attachment Etc Complete All As Specified And Directed By Engr-In-Charge. 5 M&L For Preparation Of Steel Surfaces Upto And Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Of Red Oxide Primer Complete All As Specified And Directed. 6 S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Coloured Steel Sheet 0.50 Mm Thick Having Tensile Strength Of 550 Mpa As In Roof Covering Fixed With Self Tapping Screws Complete All As Specified And Directed. 7 S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Coloured Sheet 0.50Mm Thick Having Tensile Strength Of 550 Mpa As In Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified & Directed. 8 Surface Excavation Not Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/ Loose Soil Complete All As Specified And Directed. 9 M&L For 100Mm Thick Pcc 1:4:8 Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) As In Sub Base Complete All As Specified And Directed 10 M&L For Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved, Design And Pattern As In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc Of Required Strength, Thickness And Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Laying Of Interlocking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling Joints With Sand And Cutting Of Paver Block As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Specified And Directed. 11 M&L For Cement Concrete 1:2:4 Type B-0 (Using 12.5Mm Graded Crushed Stone Aggregate) As In Coping And Chamfered For Edges Complete All As Specified And Directed. 12 M&L For Brick Work With Sub Class B Bricks (Old Size) Straight Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 All As Specified And As Directed. 13 M&L For Preperation Of New Plastered/ Unplastered Surfaces Of Wall And Applying Two Coats Of White Wash Complete All As Specified And Directed. 14 Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sqm On Plan And N Exc 1.5 M In Depth And Getting Out In Soft/Loose Soil All As Directed.

BOQ

Name of Work:- Provn of certain minor and revenue works under AGE B/R-I at GE Gurdaspur.
Sl. No. Item Description
1Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil complete all as specified and directed.
2Removal of excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
3M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
4S&F of rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails, fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by Engr-In-Charge.
5M&L for preparation of steel surfaces upto and over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
6S&F pre-painted galvalume aluminium zinc coating GI based corrugated coloured steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
7S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel coloured sheet 0.50mm thick having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws complete all as specified & directed.
8Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
9M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed
10M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
11M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in coping and chamfered for edges complete all as specified and directed.
12M&L for brick work with sub class 'B' bricks (old size) straight curved on plan exc 6m mean radius built in CM 1:4 all as specified and as directed.
13M&L for preperation of new plastered/ unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed.
14Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as directed.
15Demolition of PCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.
16M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.
17M&L for mild steel bolt factory made with hexagonal or square heads at one end and screwed the other, to be fitted with washer etc and one hexagonal or square nut exc 5cm and not exc 10cm long and dia of neck 10 to 16 mm complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56564803
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 31 Lakhs
LAST DATE 07-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Provision Of Certain Minor And Revenue Works Under Age B/R-I At Ge Gurdaspur.= 1 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surface In Any Type Of Soil Complete All As Specified And Directed. 2 Removal Of Excavated Soil To A Distance Not Exceeding 50 Mtrs And Depositing Where Directed At A Level Not Exceeding 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. 3 M&L For Pcc 1:3:6 Type C-2 (Using 40 Mm Graded Crushed Stone Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. 4 S&F Of Rolled Mild Steel Gde Fe-410-W Gde E-250 Quality-A In Roof Trusses (Framed), Trussed, Purlins Crane Gantries, Joist, Channel, Steel Tube, Rails, Fastenings & Heavy Brackets Framimg (Beam, Tee, Angle, Coulmn, Gusset Plates, Channel, Hollow Square/Rectangular Or Flat Section) Including Distance Pieces, Cleats With Riveted, Bolted Or Welded Attachment Etc Complete All As Specified And Directed By Engr-In-Charge. 5 M&L For Preparation Of Steel Surfaces Upto And Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Of Red Oxide Primer Complete All As Specified And Directed. 6 S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Coloured Steel Sheet 0.50 Mm Thick Having Tensile Strength Of 550 Mpa As In Roof Covering Fixed With Self Tapping Screws Complete All As Specified And Directed. 7 S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Coloured Sheet 0.50Mm Thick Having Tensile Strength Of 550 Mpa As In Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified & Directed. 8 Surface Excavation Not Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/ Loose Soil Complete All As Specified And Directed. 9 M&L For 100Mm Thick Pcc 1:4:8 Type D-2 (Using 40Mm Graded Crushed Stone Aggregate) As In Sub Base Complete All As Specified And Directed 10 M&L For Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved, Design And Pattern As In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc Of Required Strength, Thickness And Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Laying Of Interlocking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling Joints With Sand And Cutting Of Paver Block As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Specified And Directed. 11 M&L For Cement Concrete 1:2:4 Type B-0 (Using 12.5Mm Graded Crushed Stone Aggregate) As In Coping And Chamfered For Edges Complete All As Specified And Directed. 12 M&L For Brick Work With Sub Class B Bricks (Old Size) Straight Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 All As Specified And As Directed. 13 M&L For Preperation Of New Plastered/ Unplastered Surfaces Of Wall And Applying Two Coats Of White Wash Complete All As Specified And Directed. 14 Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sqm On Plan And N Exc 1.5 M In Depth And Getting Out In Soft/Loose Soil All As Directed.
Basic Detail
Tender No GE GSR-63/2026-2027
Bidding Type Tender
Location
City Gurdaspur
State Punjab
Key Dates
Publish Date 17 Jul 2026
Submission Date 07 Aug 2026
Open Date 14 Aug 2026
Finance
Tender Value 31 Lakhs
Tender Fee 500
EMD 62000
Exemption Not Available
Document List
63TenderDocuments.pdf
6c5e2282-3a57-431c-b5b1-29821b420853.html
BOQ_872709.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Aug 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 24 days

Tender Documents

Download All (ZIP) ↓
pdf

63TenderDocuments.pdf

html

6c5e2282-3a57-431c-b5b1-29821b420853.html

xls

BOQ_872709.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders