Tender For Welcome Maintenance To Offers Quarters At Bmc Under Ge (C) Kolkata
Tender Value
37.98 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
6 days left
EMD
75960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance To Offers Quarters At Bmc Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: WELCOME MAINTENANCE TO OFFR QTRS AT BMC UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed. |
| 4 | Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 5 | Demolition of brick work or stone masonry built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 6 | Taking down cement plaster of any description on brick work or stone masonry wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed and directed |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 9 | All as item No. 07 above but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 10 | Taking down of shutters of any description nexc 1.0 Sqm each complete all as specified and directed |
| 11 | Taking down of shutters of any description exc 1.0 Sqm and nexc 2.0 Sqm each complete all as specified and directed. |
| 12 | Taking up or down steel tubing 15mm dia and connection complete all as specified and directed |
| 13 | All as per item No. 11 above but 20mm dia bore. |
| 14 | M&L brick work using old size fly ash bricks pulverized class designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 15 | M&L half brick thick brick work with class designation 75 (kgf/cm2) fly ash bricks pulverized straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed |
| 16 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \\"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\\" or \\"Hind Styrene BR of Hindcon Chemical Ltd\\" or equivalent of M/s Pidilite Industries /Icannano @ 7 Liter per bag of cement complete finished even and smooth without using extra cement complete all as specified and as per manufacturer's specification. |
| 17 | M&L rendering 10mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed |
| 18 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and fair without using extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed |
| 19 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed |
| 20 | Supply only liquid water proofing compound as required |
| 21 | M&L Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for concealed water pipe etc. and making good cutting not exc 10Cm girth complete all as specified and directed |
| 22 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 23 | S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 24 | S&F in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 25 | All as per item No. 23 here in before but double socketed complete all as specified and directed. |
| 26 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 27 | S&F in repair PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 28 | M&L outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed |
| 29 | S&F in repairs 125mm size PTMT Grating Doom with waste hole(Min weight 40 grms) , complete all as specified and as directed. |
| 30 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips quality conforming to fe 410-S. |
| 31 | User and waste of Formwork to soffits of suspended slabs such as roof slabs,floor,slabs,landings and similar work not exceeding 200mm thick rough finished surfaces without using extra cement(Horizontal or sloping ) |
| 32 | M&L RCC (Nominal Mix) 1:1.5:3 type A-1 (Using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like similar works complete all as specified and directed. |
| 33 | M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in of floor, finish even and smooth without using extra cement complete all as specified. |
| 34 | M&L light shade Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) , Polished, area of each tile not exc 0.36 sqm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 35 | M&L light shade Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) , Polished, area of each tile not exc 0.36 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:3) complete all as specified and as directed. |
| 36 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 37 | All as item No. 35 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:3 complete all as specified and directed. |
| 38 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 39 | All as item No. 37 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:3 complete all as specified and directed. |
| 40 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 41 | M&L glazed ceramic coloured tiles 200x300x7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed |
| 42 | M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed |
| 43 | M&L granite slab 16 to 18mm thick of any type work table rubbed and pre polished in kitchen platform and like over and including cement screed bed 15mm thick in CM (1:6) bedded and jointed with grey cement slurry and pointed with white cement mortor (1:2) using marble dust with admixture to match with shade of granite complete all as specified and directed |
| 44 | M&L for Pressed steel frames 1.25mm thick for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 45 | M&L for Pressed steel frames 1.25mm thickness for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 46 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone agg as in bed blocks/hold fast complete all as specified and directed |
| 47 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed |
| 48 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009. |
| 49 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed. |
| 50 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 51 | Providing and fixing factory made uPVC white colour sliding window (Area of each window not exceeding 2.00 sqm) Three track made of extrueded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52 mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mmx57mm) Sliding interlock (one vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+-0.2mm) thick galvanised steel fr Frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm) , sliding mesh sash (36mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mmx 100mm long fasteners, hardware (Touch Lock of Zinc alloyed (white powder coated), steel roller system. including S&F 4.8mm thick tinted glass (pin headed) and Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories complete all as specified and directed. |
| 52 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc. Including S&F 4.8mm thick tinted glass and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. Complete all as specified and as directed.Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. |
| 53 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification. (a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glassNote :- All ventilators/louvers member including fitting & fixture shall be deem to included quoted rate. Only measure opening size of ventilators/louvers |
| 54 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified. |
| 56 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane. |
| 57 | S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified. |
| 58 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 59 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm long complete all as specified and directed |
| 60 | S&F Aluminium anodised, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 61 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 62 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 63 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 64 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 65 | S&F and in repair brass CP angle coak 15mm dia single way with wall flange screwed for CPVC pipe complete all as specified and directed |
| 66 | M&L 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 67 | S&F continuous (piano) Hinge, mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed. |
| 68 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of wooden finished brass as in repair complete all as specified and as directed. |
| 69 | S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed. |
| 70 | S&F, in repair, brass CP sink cock with swinging spout (wall mounted model) screwed for CPVC pipe complete with flange all as specified and directed |
| 71 | S&F and in repair 15mm fancy type chromium plated shower rose with or without swivel joints, with arm 115mm long bend pipe any size, including fixing to CPVC pipe or union complete all as specified and directed |
| 72 | Supply and fix in repair stainless steel kitchen sink without drainage board of overall size 495mm x 120mm of bowl size 410mm x 330mm x160mm, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 Cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed. |
| 73 | S&F in repair 300mm dia CP towel ring complete all as specified and directed |
| 74 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. |
| 75 | S & F in repair for chromium plated Health faucet with 15mm Dia, 1.25 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 76 | S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 77 | S & F in repair CP sink cock with swinging spout (wall mounted model) with Wall Flange screwed for CPVC pipe complete all as specified and colour as directed. |
| 78 | S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 79 | S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 80 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes, including necessary fittings etc as in repair , complete all as specified and as directed. |
| 81 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, white colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 82 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 83 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified. |
| 84 | S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 85 | S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 86 | S&F triple layer PVC water storage tank cylindrical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified & directed. |
| 87 | S&F triple layer PVC water storage tank cylindrical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 25mm outer diameter for CPVC pipe & making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified & directed. |
| 88 | S&F in repair stainless steel towel rod 600mm long complete all as specified and directed |
| 89 | S&F stainless steel utensil plate rack (size 24'' x 30'' x 10'') using 0.8mm thick sheet with all fittings accessories weight not less than 9kg complete all as specified and as directed. |
| 90 | S&F PVC bathroom cabinet (white) of size 430 x 330 x 100 mm (approx) with one single shutter and built in mirror in front of shutter, fixed on walls with wooden plugs and chromium plated brass screw and cup washed as in repair complete all as specified & directed. |
| 91 | S&F in repair corner glass shelf with brackets (heavy duty) complete all as specified and directed |
| 92 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 93 | M&L for preparation of old surfaces of wood or wood based materials of any description and applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 94 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 95 | M&L for preparation of old surfaces of steel or steel based materials of any description and applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 96 | M&L Preparing old surfaces of internal walls and applying one coats of white wash, complete all specified and directed. |
| 97 | M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) including rubbing with emery paper to make wall surface smooth and even complete all as specified and directed. |
| 98 | M&L preparing newly plastered ceiling surfaces and applying 2 coat of oil bound distemper over a coat of primer including a coat of white cement based putty (approx 1.5mm thick) including rubbing with emery paper to make wall surface smooth and even complete all as specified and directed. |
| 99 | M&L preparing old decorated surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 100 | M&L preparing old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 101 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over and including1.5mm thick water proof wall care putty including rubbing with emery paper to make wall surface smooth and even complete all as specified and directed. |
| 102 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 103 | M&L preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint of required shade complete all as specified & directed. |
| 104 | Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed. |
| 105 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 106 | S&F in repair 20mm dia Harrison rail MS Chromium plated with fixing bracket, stops, rollers etc all as specified and directed |
| 107 | S&F in repair safety lever lock mild steel 4 lever for rolling shutter complete all as specified and directed |
| 108 | S&F in repair ball bearing for rolling shutter of existing type and size complete all as specified and directed |
| 109 | M&L for oiling and greasing of rolling shutter for smooth functioning for size nexc 7 Sqm each complete all as specified and directed |
| 110 | M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified & directed. |
| 111 | Supply and fix in repair for cloth drying ceiling hanger with six lines best quality containing of :-(a) Holder (made from chromic metal with 6 openings- 1 Nos(b) Plastic slate with pulley- 2 Nos(c) 1/2\\" SS Pipe attached to strings of dia 4mm nylon 1.80m - 6 Nos(d) Screws and bolts- 9 Nos(e) Conical Grips- 6 Nos |
| 112 | S&F heavy duty auto hinges (zero degree or any) make of godrej or equivalent, complete all as specified and directed Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender