Tender For Maintenance Of Army Avn Aseets Under Age B/R-Ii At Dinjan Mil Stn
Tender Overview
Project Description
Tender For Maintenance Of Army Avn Aseets Under Age B/R-Ii At Dinjan Mil Stn= 1 B/R Works : -Dismantling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, In Roof Covering Including Ridges Complete All As Specified And Directed. 2 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Complete All As Specified And Directed. 3 S & F Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Corrugated Stee Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall, Fixed With Self Tapping Screws As Specified Complete All As Specified And Directed. 4 M & L For Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed. 5 Dismantling Of Wall & Celling Boards (Fiber Pulp Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. 6 S&F For Aluminium Anodised Snap Grid Frame Work Of Size 600Mm X 600Mm Frame Work For Ceiling With Aluminium Tee Section Of Size 23.5Mm X 26.4Mm X 1.4Mm Thick And Aluminium Angle Section Of Size 36.5Mm X 25Mm X 1.4Mm Thick, For False Ceiling Including Hangers 4 Mm Dia. G.I. (Upto 1200Mm Length) Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of G.I. Flat 40 X 3 Mm Size 60Mm Long And Expansion Hold Fasteners 12.5Mm Dia, 40Mm Long Including 4 Mm Thick Non Asbestos E-Board (Plain), Hspc Fixed To Frame Including Providing Two Coats Of White Wash Complete All As Specified And Directed.Make Of E-Board : Eternit Everest / Lafarge/ Armstrong/Visaka Industries Ltd. 7 S&F Rolled Mild Steel Work As In Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etcconfirming To Fe -410-W (Gde-E-250) Quality -B Complete All As Specified And Directed. 8 M&L For Preparation Of Old Treated Steel Surfaces Of Roof Of Any Description Over 10Cm Girth Or Width And Applying One Coat Of Antisol Roof/Hangar Paint, Height Up To 20 Meter Complete All As Specified And Directed. 9 Dismantling Timber Scantling 40 Sq Cm & Over In Section , Any Position In Unframed Work Complete All As Specified And Directed. 10 M&L For Second Class Hard Wood Timber Framed Work As In Scantling Complete All As Specified And Directed. 11 M & L Preparation Of New Untreated Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete As Specified And Directed. 12 M & L For Preparation Of New Steel Surfaces Of Any Description, Over 10 Cm In Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zine Chrome Primer Complete All As Specified And Directed. 13 S & F Glass Dividing 3 Mm Thick 38Mm Wide And Inserted In Position To Conforming To Design Complete All As Specified And Directed. 14 M & L For 75 Mm Thick Plain Cement Concrete 1:3:6, Type C-2 (Using 40Mm Graded Stone Aggregate) As In Plinth Protection Etc, Finishing Cement Concrete Surface Even And Smooth With Out Using Extra Cement Including Making Joints With Bitumastic Filling In Proportion Of Bitumen And Sand (1:2) Complete All As Specified And Directed. 15 M&L For Pcc 1:2:4 Type B1 100Mm Thick Flooring Finished Even And Smooth With Using Extra Cement Complete All As Specified And Directed. 16 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. 17 M&L For Coloured Vitrified Ceramic Tiles 10Mm Thick (Square/Rectangular) Polished, Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.36Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Incl 15Mm Thick Screed Bed In Cm 1:6 And Incl Dismantling Floor Tiling And Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. 18 M&L For Coloured Vitrified Tiles (600X600)X10Mm Thick In Floors Etc, Set And Jointed In Neat Cement Slurry As In Skirting And Pointed In White Or Coloured Cement To Match Over 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 19 M&L For Coloured Non Skid Edge Cut Ceramic Tiles 400X400X6 To 7Mm Thick Laid In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match And Incl 15Mm Thick Screed Bed In Cm 1:6 Incl Dismantling Floor Tiling And Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. 20 M&L For Coloured Glazed Ceramic Tiles Of Size 300X450X 7 - 8Mm Thick As In Dados/Skirting Etc Set And Jointed In Neat Cement Slurry And Painted In White Or Coloured Cement To Match Over 10Mm Thick Screed Bed In Cm 1:4 And Incl Dismantling Wall Tiling And Cement Mortar Bedding Adn Removing Rubbish Off The Premises Complete All As Specified And Directed. 21 Dismantling Boarding, Any Description, Fixed In Any Position With Nails (For Cupboard Shelve) Complete All As Specified And Directed. 22 M&L For 19Mm Thick Particle Board, Medium Density, Flat Pressed, Single Layer Type Or Three Layer Type With Bwr Type Adhesive, Fixed With Screws To Timber Frame Work Complete All As Specified And Directed. 23 Taking Down Chowkats Or Frame, N. Exc 1.5 Sqm Each With Shutters Wooden/Aluminium/Steel (Without Taking Off Shutter From The Frame) Complete All As Specified And Directed. 24 Taking Down Chowkhats Or Frames With Shutter Wooden/Aluminium/Steel (Without Taking Off Shutter From The Frame) Exe 1.50 & N.Exc. 4 Sqm In Each Complete All As Specified And Directed. 25 Taking Down Shutters Of Any Descrption N.Exc 1 Sqm Each Complete All As Specified And Directed. 26 Taking Down Shutter Of Any Description But Exc. 1 Sqm And N.Exc. 2 Sqm Each Complete All As Specified And Directed. 27 M&L For 2Nd Class Hard Wood Plain, Solid , Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints, Supplied And Fixed Complete All As Specified And Directed. 28 S&F Anodised Aluminium Frame Powder Coating For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc (Minimum Thickness Of Powder Coating 50 Micron) Complete All As Specified And Directed. 29 S&F Anodised Aluminium Door Shutters, Powder Coated Aluminium Section Weighing 0.55 Kg/ M Including Necessary Joining Cleats, Glazing Clips, Ruber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Anodised Aluminum Snap Beading Screws Etc.(Minimum Thickness Of Powder Coating 50 Micron) Complete All As Specified And Directed. 30 S&F Anodised Aluminium Window And Ventilator Shutters, Powder Coated Side Hung Type Without Sash Bars, Aluminium Sections Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Such As Peg Stays 150Mm Long (1 No.). Hinges Type B-21 100Mm Long (2 No.) Suitable Handle (1 No.) (Minimum Thickness Of Powder Coating 50 Micron) Complete All As Specified And Directed. 31 Supply Only 5.5Mm Thick Sheet Glass, Selected Quality In Squares N Exc. 0.5 Sqm Each Pane Complete All As Specified And Directed. 32 S&F In Repairs Aluminium (Extruded Section Body) Door Closer Hydraulically Regulated, Designation No 3, Universal Type, Suitable For Door Shutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80Kg And Fixed Complete All As Specified And Directed. 33 S & F 35 Mm Thick, 2Nd Class Hardwood Plain, Framed, Panelled Shutters (Any Number Of Panels), With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers All Complete All As Specified And Directed. 34 S & F 35Mm Thick, 2Nd Class Hard Wood, Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc Complete As Specified And Directed . Sizes Of Members Of Shutters As Specified In Ssr Part I, Section -8, Clause 8.24 (A) Complete All As Specified And Directed. 35 S & F Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube, Suppling & Fixing In Opening As Per Specification And Drawing Complete All As Specified And Directed. 36 S & F Factory Made Solid Panel Pvc Door Shutter, 30Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails, Ms Frame Shall Be Covered With Heat Moulded, Plain Colour Pvc \C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement Complete All As Specified And Directed. 37 S&F Mild Steel Hold Fasts Fixed With Ms Screws, Conforming To Fe410-0 Complete All As Specified And Directed. 38 M&L For Pcc (1:2:4) Type B1(Using 20Mm Graded Crushed Stone Aggregate) For Fixing Of Hold Fast Including Necessary Form Work Complete All As Specified And Directed. 39 S&F 300Mm Long Aluminium Alloy Anodised Sliding Door Bolts, With Haps And Staples (Bolt Type) And Fixing Clips Of Sheet, Cast Oions Or Cast Aluminium Alloy And Fixed. With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed Complete All As Specified And Directed 40 S&F 75 Mm Size Stainless Steel Butt Hinges Medium Weight Cold Rolled Complete All As Specified And Directed. 41 S & F Butt Hinges 100 Mm Size, Medium Weight, Cold Rolled Mild Steel Complete All As Specified And Directed. 42 S & F 150 Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 43 S & F 100 Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 44 S & F Aluminium Anodised Barrel Tower Bolts Of Size 150 Mm Extruded Section And Fixed Complete All As Specified And Directed. 45 S & F Aluminium Anodised Barrel Tower Bolts Of Size 100 Mm Extruded Section And Fixed Complete All As Specified And Directed. 46 S & F Galvanised Mild Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.88Mm And Fixed With Tinned Tacks, Or Galvanised Wire Staples Complete All As Specified And Directed. 47 S & F In Repair Galvanized Mild Steel Wire Cloth 0.56 Mm Nominal Dia Of Wire & Average Width Of Aperature 1.18Mm & Fixed With Tinned Tacks Are Galvanized Wire Staples Complete All As Specified And Directed. 48 Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden Frames Or Stone, Concrete Or Brick Surrounds, Glazed With Putty Or Fixed With Beads Complete All As Specified And Directed. 49 S & F 3.0Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each Panes Complete All As Specified And Directed. 50 Taking Up Or Down Steel Tubing And Connections Including Cleaning If Refixing Required For 15 Mm Bore Of Pipe Complete All As Specified And Directed Complete All As Specified And Directed. 51 S & F Steel Tubing 15Mm Bore Medium Grade Galvanised With All Fittings And Fixed Complete To Wall, Ceilings Or Laid In Floors Complete All As Specified And Directed. 52 Taking Up Or Down Steel Tubing And Connections Including Cleaning If Refixing Required For 20 Mm Bore Of Pipe Complete All As Specified And Directed. 53 S & F Steel Tubing 20 Mm Bore Medium Grade Galvanised With All Fittings And Fixed Complete To Wall, Ceilings Or Laid In Floors Complete All As Specified And Directed. 54 S & F In Repairs 15 Mm Bore Bip Taps, Chromium Plated Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed Complete All As Specified And Directed. 55 Supplying And Laying 16Mm Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings In Trenches/Walls Complete All As Specified And Directed. 56 Supplying And Laying 20Mm Cpvc Pipes Sdr 11 & Plain Cpvc Sdr 11 Fittings In Trenches/Walls Complete All As Specified And Directed. 57 M&L For Cutting Chase, Pinning In Making Good To Faceing Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landing, And Cutting Chase For Concealed Water Tubing Or Concealed Conduit Wiring Etc And Making Good Cutting Exc 10Cm But N Exc 20Cm Complete All As Specified And Directed. 58 Demolition Of Un-Reinforced Cement Concrete In Ground Floors And Pavings Not Exceeding 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. 59 M & L For 75 Mm Thick Pcc Type D-2 1:4:8 ( Using 40Mm Graded Stone Aggregate) As In Sub Base Of Floor Complete All As Specified And Directed. 60 Material And Labour For Machine Pressed Precast Concrete Interlocking Coloured Paver Block Any Shape And Size Confirming To Is 15658-2006 Of 60 Mm Thickness M-35 Grade With Grey Cement And Pigment Laid Over 50Mm Thick Sand Cushioning Complete All As Specified And As Directed. (Sand Cushining Shall Be Measured And Paid Separately) Complete All As Specified And Directed. 61 Supply Only Sand For Cushioning Under Interlocking Tiles Complete All As Specified And As Directed Complete All As Specified And Directed. 62 S&F Laquer Coated Chequered Cement Concrete Coloured Tiles 30Cmx 30Cmx25Mm Thick Set Jointed In Neat Cement Slurry And Pointed In Grey Cement Mixed With Pigment To Match The Shade Of Tiles Over And Incl 15 Mm Thck Cement Screed In Cm 1:6 Complete All As Specified And Directed. 63 S & F In Repairs, 15 Mm Bore, Bib Tap, Ptmt (Pvc) With Crutch Or Butter Fly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And Directed. 64 S & F In Repairs, Stop Valves, 15 Mm Bore Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions Acomplete All As Specified And Directed. 65 S & F In Repairs, 15Mm Bore, Pvc Connection Pipe 450Mm Long With Ptmt Nuts At Both Ends Complete All As Specified And Directed. 66 S&F In Repairs Vitreous China Water Closet Pan ( Pedestal Pattern), White Including Fixing Bolts Etc Including Plastic Water Closet Seat, Black/White Closed Pattern With Flat Bottom And Cover And Mild Steel Chromium Plated Hinging Device Complete All As Specified And Directed. 67 S & F In Repairs, Vitreous China Squatting Pan, Orissa Pattern, Size 580Mm X 440 Mm, White With Integral Foot Rest And P Or S Trap, Including Provision Of Lime Concrete Bedding, Connection To Trap And Flushing Pipe Etc Complete Including Making Good To Disturbed Surfaces Of Floor To Match With Existing Complete All As Specified And Directed. 68 S&F In Repairs Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete All As Specified And Directed. 69 S & F In Repairs, 10 Litres Capacity Pvc Valveless Syphonic Action Type, Flushing Cistern (Isi Marked), Low Level With Inlet, Ball Valve, Float Bracket & Flush Pipe Complete All As Specified And Directed. 70 S & F In Repairs Vitreous China Wash Basin, White,Flat Back, Size 550 X 400 Mm With Brackets,Excluding Pillar Cock 15 Mm Bore Cp, Pvc Connection Of 450 Mm Long Including Pvc (Hdpe) 32 Mm Bore Waste Pipe, Brass Couplings 32 Mm Cp Etc Complete All As Specified And Directed. 71 S & F 15 Mm Bore Pillar Taps, Cast Copper Alloy, Chromium Plated, Fancy Type With Capstan Heads, Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe Complete All As Specified And Directed. 72 S & F In Repairs 600 X 450Mm Beveled Edged Mirror Or Selected Qualtity Glass Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup And Washers Complete All As Specified And Directed. 73 Dismantling Water Tanks Capacity Exc 250 Ltrs And N.Exc 500 Ltrs And Removing To Store Complete All As Specified And Directed. 74 Dismantling Water Tanks Capacity Exc 500 Ltrs And N.Exc 1000 Ltrs And Removing To Store Complete All As Specified And Directed. 75 S & F Rotational Moulded Poly Ethylene Water Storage Tanks 1000 Ltrs (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. 76 S & F Rotational Moulded Poly Ethylene Water Storage Tanks 500 Ltrs (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. 77 S & F In Repair 20 Mm Bore, Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High-Density Plastic Bal Screwed For Iron Pipe And Fixed. (Minimum Weight 210 Gms)Complete All As Specified And Directed. 78 S & F In Repairs, Vitreous China Bowl Urinal Flat Back, Of Size 465X355X265Mm, White (Minimum) With Grating And Union For Discharge Pipe (Excluding Flushing Cistern, Flush Pipe & Waste Pipe) Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60 Mm Long Brass Screws, Pointing Around Urinal Back In Cement Complete All As Specified And Directed. 79 Demolition Of Brick Work Built In Cement Mortar Complete All As Specified And Directed. 80 M & L For Brick Work With Sub Class B Bricks Well Burnt Straight Or Curved In Plan Exc 6 Mtr Mean Radius Built In Cm (1:6) Using Old Size Bricks Complete All As Specified And Directed. 81 M & L For Brick Work With Sub Class -B Old Size Bricks Well Burnt, Straight Or Curved On Plan To Any Radius In Half Brick Thick Wall Built In Cm 1:6 Complete All As Specified And Directed. 82 Taking Down Cement Plaster On Brick Or Stone Walls, Etc, Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc Complete All As Specified And Directed. 83 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 And Finished The Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 84 M & L For Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 And Finished The Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 85 M & L For 5 Mm Thick Rendering In Cement Mortar 1:3 On Concrete Surfaces As In Ceilings (Sunshade, Chajja Etc) And Finished The Surfaces Even And Fair Without Using Extra Cement Complete All As Specified And Directed. 86 M & L For Preparing Newly Plastered Surfaces Of Wall And Applying Two Coats Of White Wash Complete All As Specified And Directed. 87 M & L For Preparing New Plastered Surfaces Of Ceiling And Applying Three Coats Of White Wash Complete All As Specified And Directed. 88 M & L For Two Coats Of Oil Bound Distemper Over A Coat Of Primer & Putty On Newly Plastered Wall Surfaces Including Preparation Of Surfaces Complete All As Specified And Directed. 89 M& L For Complete Removal Of Existing Treatment And Treating With Two Coats Of Oil Bound Distemper Over A Coat Of Primer & Putty To Wall Surfaces Incl Preparation Of Old Surface Of Wall Complete All As Specified And Directed. 90 S&F In Repairs 75 Mm Bore Pvc (Swr) Pipes Of Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And Directed. 91 S&F In Repairs 110Mm Dia Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Complete All As Specified And Directed.
BOQ
| Sl. No. | Item Description |
| 1 | B/R WORKS : -Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 3 | S & F pre- painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 4 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed. |
| 6 | S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and directed.Make of E-Board : Eternit Everest / Lafarge/ Armstrong/Visaka Industries Ltd. |
| 7 | S&F rollED mild steel work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etcconfirming to Fe -410-W (Gde-E-250) quality -B complete all as specified and directed. |
| 8 | M&L for preparation of old treated steel surfaces of roof of any description over 10cm girth or width and applying one coat of antisol roof/Hangar paint, Height up to 20 Meter complete all as specified and directed. |
| 9 | Dismantling timber scantling 40 sq cm & over in section , any position in unframed work complete all as specified and directed. |
| 10 | M&L for Second class hard wood timber framed work as in scantling complete all as specified and directed. |
| 11 | M & L preparation of new untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete as specified and directed. |
| 12 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 13 | S & F Glass dividing 3 mm thick 38mm wide and inserted in position to conforming to design complete all as specified and directed. |
| 14 | M & L for 75 mm thick plain cement concrete 1:3:6, type c-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with bitumastic filling in proportion of bitumen and sand (1:2) complete all as specified and directed. |
| 15 | M&L for PCC 1:2:4 type B1 100mm thick flooring finished even and smooth with using extra cement complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for coloured vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles exc 0.18 Sqm but not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 and incl dismantling floor tiling and cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 18 | M&L for coloured vitrified tiles (600x600)x10mm thick in floors etc, set and jointed in neat cement slurry as in skirting and pointed in white or coloured cement to match over 10mm thick rendering in cm 1:4 complete all as specified and directed. |
| 19 | M&L for coloured non skid edge cut ceramic tiles 400x400x6 to 7mm thick laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed in CM 1:6 incl dismantling floor tiling and cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 20 | M&L for coloured glazed ceramic tiles of size 300x450x 7 - 8mm thick as in dados/skirting etc set and jointed in neat cement slurry and painted in white or coloured cement to match over 10mm thick screed bed in CM 1:4 and incl dismantling wall tiling and cement mortar bedding adn removing rubbish off the premises complete all as specified and directed. |
| 21 | Dismantling boarding, any description, fixed in any position with nails (for cupboard shelve) complete all as specified and directed. |
| 22 | M&L for 19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed. |
| 23 | Taking down chowkats or frame, n. exc 1.5 sqm each with shutters wooden/aluminium/steel (without taking off shutter from the frame) complete all as specified and directed. |
| 24 | Taking down chowkhats or frames with shutter wooden/aluminium/steel (without taking off shutter from the frame) exe 1.50 & n.exc. 4 sqm in each complete all as specified and directed. |
| 25 | Taking down shutters of any descrption n.exc 1 sqm each complete all as specified and directed. |
| 26 | Taking down shutter of any description but exc. 1 Sqm and n.exc. 2 Sqm each complete all as specified and directed. |
| 27 | M&L for 2nd class hard wood plain, Solid , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 28 | S&F Anodised aluminium frame Powder Coating for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 29 | S&F Anodised aluminium door shutters, powder coated aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 30 | S&F Anodised aluminium window and ventilator shutters, powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 31 | Supply only 5.5mm thick sheet glass, selected quality in squares n exc. 0.5 sqm each pane complete all as specified and directed. |
| 32 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 33 | S & F 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all complete all as specified and directed. |
| 34 | S & F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed. |
| 35 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed. |
| 36 | S & F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC \\"C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 37 | S&F Mild steel hold fasts fixed with MS screws, conforming to Fe410-0 complete all as specified and directed. |
| 38 | M&L for PCC (1:2:4) type B1(using 20mm graded crushed stone aggregate) for fixing of hold fast including necessary form work complete all as specified and directed. |
| 39 | S&F 300mm long aluminium alloy anodised sliding door bolts, with haps and staples (bolt type) and fixing clips of sheet, cast oions or cast aluminium alloy and fixed. with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 40 | S&F 75 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 41 | S & F Butt hinges 100 mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 42 | S & F 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 43 | S & F 100 mm size Aluminium handles, cast type, anodised complete all as specified and directed. |
| 44 | S & F aluminium anodised barrel tower bolts of size 150 mm extruded section and fixed complete all as specified and directed. |
| 45 | S & F aluminium anodised barrel tower bolts of size 100 mm extruded section and fixed complete all as specified and directed. |
| 46 | S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.88mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 47 | S & F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18mm & fixed with tinned tacks are galvanized wire staples complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 49 | S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed complete all as specified and directed. |
| 51 | S & F steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 52 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed. |
| 53 | S & F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and directed. |
| 54 | S & F in repairs 15 mm bore Bip taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | Supplying and laying 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified and directed. |
| 56 | Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls complete all as specified and directed. |
| 57 | M&L for Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm complete all as specified and directed. |
| 58 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 59 | M & L for 75 mm thick PCC type D-2 1:4:8 ( using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 60 | Material and labour for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over 50mm thick sand cushioning complete all as specified and as directed. (Sand cushining shall be measured and paid separately) complete all as specified and directed. |
| 61 | Supply only sand for cushioning under interlocking tiles complete all as specified and as directed complete all as specified and directed. |
| 62 | S&F Laquer coated Chequered cement concrete coloured tiles 30cmx 30cmx25mm thick set jointed in neat cement slurry and pointed in grey cement mixed with pigment to match the shade of tiles over and incl 15 mm thck cement screed in CM 1:6 complete all as specified and directed. |
| 63 | S & F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S & F in repairs, stop valves, 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions acomplete all as specified and directed. |
| 65 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed. |
| 66 | S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 67 | S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing complete all as specified and directed. |
| 68 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 69 | S & F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and directed. |
| 70 | S & F in repairs Vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets,excluding pillar cock 15 mm bore CP, PVC connection of 450 mm long including PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed. |
| 71 | S & F 15 mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 72 | S & F in repairs 600 x 450mm beveled edged mirror or selected qualtity glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed. |
| 73 | Dismantling water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed. |
| 74 | Dismantling water tanks capacity exc 500 ltrs and n.exc 1000 ltrs and removing to store complete all as specified and directed. |
| 75 | S & F Rotational moulded poly ethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 76 | S & F Rotational moulded poly ethylene water storage tanks 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 77 | S & F in repair 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms)complete all as specified and directed. |
| 78 | S & F in repairs, Vitreous China bowl urinal flat back, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 79 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 80 | M & L for brick work with sub class 'B' bricks well burnt straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and directed. |
| 81 | M & L for brick work with sub class -B old size bricks well burnt, straight or curved on plan to any radius in half brick thick wall built in CM 1:6 complete all as specified and directed. |
| 82 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 83 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 84 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 85 | M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceilings (sunshade, chajja etc) and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 86 | M & L for preparing newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 87 | M & L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 88 | M & L for two coats of oil bound distemper over a coat of primer & Putty on newly plastered wall surfaces including preparation of surfaces complete all as specified and directed. |
| 89 | M& L for Complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer & Putty to wall surfaces incl preparation of old surface of wall complete all as specified and directed. |
| 90 | S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 91 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. |
| 92 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 93 | S&F 110mm bore PVC (SWR) bends with oval access door complete all as specified and directed. |
| 94 | S&F 110 mm PVC (SWR) bend any radius complete all as specified and directed. |
| 95 | M & L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 96 | M&L for preparation of old painted surfaces of wood and wooden based surfaces over 10cm width of girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 97 | M&L for Painting lines, dashes, arrows, letters, etc. or roads pavements and the like exc 10cm wide with white or golden yellow thermoplastic road/Runway marking in all respect with 2.5 mm thick layer of marking and 250 gm/sqm glass beads consumed in per sqm ratio with mechanical meansc omplete all as specified and directed.. |
| 98 | S&F in repairs Super flash strip UV resistant Self-Adhesive flashing Bituminous Tape for waterproofing, bonding, Sealing for Transperent sheets in hangar roof complete all as specified and directed. |
| 99 | S&F in repairs Vitreous china Urinal, Half Stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 100 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 101 | M&L for preparation of old surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots on walls and applying one coat of white wash including cleaning the floor/ joinery surfaces, glass panes complete all as specified and directed. |
| 102 | M&L for raking of joint/removing old any sealing compound, dirt from expansion joints 25mm wide (+3mm) and 40 mm deep, cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polythylene foam backup rod of 20mm dia and applying bond breaker tape on top of backup rod for complete width of the joints priming top with specified primer suitable for polysulfied sealing compound and filling polysulfied based sealant, 10mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specifed and directed. |
| 103 | M&L for raking of joint/removing old any sealing compound, dirt from dummy / construction joints 10mm wide (+3mm) and 30 mm deep, cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polythylene foam backup rod of 10mm dia and applying bond breaker tape on top of backup rod for complete width of the joints, priming top with specified primer suitable for polysulfied sealing compound and filling polysulfied based sealant, 10mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specifed and directed. |
| 104 | M&L for raking of joint/removing old any sealing compound, dirt, upto average depth of 30mm from dummy / construction joints of a average width 12mm wide (+3mm) cleaning the joint sides properly by mechanical means with diamond cutter, filling the joints with closed cell, medium density, cross linked polythylene foam backup rod of 15mm dia and applying bond breaker tape on top of backup rod for complete width of the joints, priming top with specified primer suitable for polysulfied sealing compound and filling polysulfied based sealant, 13mm thick including using masking tape on edges of joints to avoid accidental spillage of sealant on top of surface of pavements complete all as specifed and directed. |
| 105 | E/M WORKS :Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed. |
| 106 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 107 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender