Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #56564562

Tender For Provision Of Toilet And Bathroom For Jcos Living For Cg Bn At Base C -Ii Under Ge 873 Ews

Issued by Statutory Bodies & Commissions/Committees · Leh, Ladakh
Tender Value
38.52 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
14 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Provision Of Toilet And Bathroom For Jcos Living For Cg Bn At Base C -Ii Under Ge 873 Ews

BOQ

Name of Work:- PROVN OF TOILET AND BATHROOM FOR JCOs LIVING FOR CG BN AT BASE C -II UNDER GE 873 EWS
Sl. No. Item Description
1Surface dressing n exc 15 cm deepin hard/dense soil and getting out complete all as specified and directed.
2Excavation over areas , n.exc. 1.5m deep in hard/dense soil and getting out complete all as specified and directed.
3Excavation in trenches n.exc 1.5 mtr wide & n.exc 1.5 mtr deep in hard/dense soil and getting out complete all as specified and directed.
4M&L for Cement concrete Type B-2, 1:4:8 mix using 40mm graded stone aggregae as in foundation fillings, mass concrete complete all as specified and directed.
5M&L for RCC M-30 (Design Mix) (20mm graded crushed stone aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs,under-reamed piles and mass concrete complete all as specified and directed.
6Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm Thk in hard/dense soil complete all as specified and directed.
7Removing excavated materia ln. exc 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
8M&L for RCC M-30 (Design Mix) (20mm graded crushed stone aggregates) in Columns,pillars, piers, posts and struts complete all as specified and directed.
9M&L for RCC M-30 (Design Mix) (20mm graded crushed stone aggregates) in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.
10M&L for RCC M-30 (Design Mix) (20mm graded crushed stone aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and directed.
11M&L for mild steel TMT bars, 10 mm dia and over , cut to length, bent to required shape including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
12All as per item No 11 above but 5mm dia and over upto andincluding 10mm as in stirrups, spacers and binders complete all as specified and directed.
13M&L for flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.
14M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions (Square,rectangular/or polygonal) for rough finish surfaces of concrete, complete all as specified and directed.
15M&L for flat Formwork to soffits of flat surface suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and directed.
16M&L for flat Formwork to sides and soffits of floor or roof beams, beam haunch-ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc for rough finished surfaces of concrete complete all as specified and directed.
17M&L Precast cement concrete block masonry with solid blocks exc 20 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded crushed stone aggregate) complete all as specified and directed.
18M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick Type B1 (1:2:4) with 20mm graded crushed stone agg (with plain or interlocking joints as directed) setting in mortar (1:4) , complete, in walls complete all as specified and directed.
19S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
20S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165MS work as in hold fast made in flat iron complete all as specified and directed.
21Material and labour for plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and directed.
22S&F 35mm thick 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm thick BWP commercial; ply or 12mm thick veneered particle boards on both sides. The size of rail and style as per IS-1003 (part-I) kiln seasoned and chemicaly pressure treated complete all as specified and directed.
23M&L for 30mm thick IInd class Hard wood glazed and skeleton shutters open rebated ventilator and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain, chemfered fitted with cut and mitred beads for securing glass, etc fitted to chowkat complete all as specified and directed.
24S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
25S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n,exc 0.5 Sqm, each pane complete all as specified and directed.
26S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube opening as per specification and drawing complete all as specified and directed.
27S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.
28M&L 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even complete all as specified and directed.
29M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement complete all as specified and directed.
30M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.
31M&L for Preparation of new surface of wall and applying three coat of white wash complete all as specified and directed.
32M&L for Preparing of new plastered surface and applying two coats cement base paints on walls over a coat of alkine risistant primer.
33M&L Preparing of new surface of plaster and applying three coats of white wash on ceiling complete all as specified and directed.
34M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete all as specified and directed.
35M&L 75mm Thk. PCC 1:4:8 type D2 under flooring , using 40mm graded crushed stone aggregates as in sub base complete all as specified and directed.
36M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in sub floor complete all as specified and directed.
37M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
38M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete all as specified and directed.
39S & F puff water tank 1000 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over and incl PCC platform complete all as specified and directed.
40S&F for PP-R Outer dia of pipes in 25mm Gate valves (brass insert) as per requirement of the site etc complete all as specified and directed. .
41S&FVitreous china white squatting pan orrissa pattern of size 580mm x 440mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints complete all as specified and directed.
42S&F plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed.
43S&F vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed
44S&F vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified and directed.
45S&F for medium weight butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long complete all as specified and directed.
46S&F for medium butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 75mm long complete all as specified and directed.
47S&F for 150mm medium weight aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
48S&F for 75 mm medium weight aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
49S& F for 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
50S&F for 125mm aluminium handles, cast type ,anodised and pattern/design as approved complete all as specified and directed.
51M&L for hard core of broken stone of bouders n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true a surface complete all as specified and directed.
52M&L for 75 mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) as in paving / plinth protection finished even and smooth , without using extra cement incl necessary form work complete all as specified and directed.
53S&F for 3 layer PPR polypylene random copolymer concealed pipes 20 mm dia SDR 7.4 (PN-16)UV stabilized and anti microbial fusion welded having thermal stability for & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
54S&F for 3 layer PPR polypylene random copolymer concealed pipes 25 mm dia SDR 7.4 (PN-16)UV stabilized and anti microbial fusion welded having thermal stability for & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or in floors etc complete all as specified and directed.
55M&L for Elastometric Nutral rubber insulation to PP-R pipes suitable for 25mm outer dia 22/19mm thick with chiken wire mesh wire netting 25mm gauge, 20mm mesh with 0.01mm aluminium foil including jointing and fixing material such as solvent adhesive SR-998 ccomplete all as specified and directed.
56S&F for Bib taps, fancy type cast copper alloy, chromium plated with crutch and butterfly handle ,screw down screw for iron pipe or brass ferrule of 15 mm bore & fixed complete all as specified and directed.
57S&F for PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed
58S&F for Pillar taps cast copper alloy with capstan heads screw for 15 mm dia high pressure with or without letters hot or cold with long screwed shank and fly nuts complete all as specified and directed.
59S&F Stop/angle cock 15mm bore, fancy type cast copper alloy , screwed down, high pressure, with crutch or butter- fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
60S&F PVC low level flushing cistern 10 ltrs capacity, white symphonic action with ball valve, float and handle including flush pipe and brackets complete all as specified and directed.
61M&L 75 mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
62S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed.
63S&F Brass chromium plated tubular towel rail, 20mm dia between flanges complete all as specified and directed.
64S&F Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified and directed.
65S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified and directed.
66S&F 32mm bore waste pipe for WHB complete all as specified and directed.
67S & F PVC (SWR) 110mm dia bends any radius complete all as specified and directed.
68S&F PVC (SWR) 75mm dia pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
69S & F PVC (SWR) 75mm dia bends any radius complete all as specified and directed.
70S & F 110 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and directed.
71S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed
72S&F 110mm dia vent cowl PVC (SWR) complete all as specified and directed.
73S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches including taking down of old pipes complete all as specified and directed.
74S & F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms complete all as specified and directed.
75M&L for PCC 1:2:4 Type B0 using 12.50 mm graded crushed stone aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc complete all as specified and directed.
76Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound will be measured and paid separately under relevant item in this schedule
77Supply only water proofing compound of ISI marked complete all as specified and as directed.
78M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.
79M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) land on primered surface by torced application complete all as specified and directed.
80M & L for heat resisting paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc.,exceeding 10cm in width or girth complete all as specified and directed.
81Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil.complete all as specified and as directed
82Removing excavated material of soil n exc. 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
83M&L for 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded crushed stone aggregate) as in hardstanding surfaced finished even and smooth without using extra cement complete all as specified and directed.
84M&L for Sand filling/sand cushioning under floors or in foundations complete all as specified and directed.
85M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade complete all as specified and directed.
86M&L for providing cement cencrete types C-1 1:3:6 (20 mm crushed stone agg) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
87Constr of Septic tank designed to carry sewage and sullage water, excavation in hard/dense soil, PCC 1:4:8 below foundation,block masonry Walls and Roof Slab including manhole openings with cover connection etc.,complete for 10 Users complete all as specified and directed.(Ref TD Drg - CESZ/TD-01/2015 dt 22 Feb 2015)
88Construcion of Soakage well exe, in hard/dense soil, foundation in PCC 1:3:6, well of honey combed and solid in M-30 concrete, including intercepting chamber, screen chamber stone masonry in CM, RCC cover slab in M-30/RR Masonry/Filling with brick bats complete of size 3.00mtr dia and 3.0mtr deep n etc.,complete all as specified and directed. (Drawing No : CESZ/TD-1078/2011 Sheet 1/1)
89Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified and directed.
90Plain cement concrete(1:3:6) type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore RCC NP3 pipe complete all as specified and directed.
91S&F 150mm bore RCC NP3 pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.
92Plain cement concrete (1:3:6), type C-2 (40mm graded crushed stone agg) as in foundation all as specified and shown on drawings complete all as specified and directed.
93M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in cement mortor 1:4 complete (Type C-1 1:3:6) using 20mm graded agg crushed stone complete all as specified and directed.
94M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured seprately.
95Supply only Integral water proofing compound complete all as specified and directed.
96Precast reinforcement cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes etc.) chullas hoods, chajjas, shelevs and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and as shown on drawings.
97M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
98M & L for Mild steel bars 8mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
99M & L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
100Returning filling hard/dence Soil in including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/loose soil complete all as specified and directed.
101Removing excavated material to a distance beyond 50 m and upto a total distance of 100 m.and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
102M&L for point wiring for one light or one fan point controlled by one switch with using 1.5 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl suitable size switches /sockets PVC board ISI marked fire retardent as required at site complete all as specified and directed.
103All as per Serial item No 102 above but point wiring for 3/ 5 pin switch socket outlet , 5 amps on same board.
104All as per Serial item No 102 above but point wiring for 3/ 5 pin switch socket outlet combination, 5 amps on independent board.
105All as per Serial item No 102 above but point wiring with using 2.5 sq.mm (nominal area) copper FRLS PVC insulated unsheathed stranded copper conductor incl same size continuous earth wire on independent board for one 5/6 pin switch socket outlet combination, 5 &15 amps (independent) complete all as specified and directed.
106S & F switch piano type 230 volts, 5 Amps, single pole
107S & F Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts
108S & F switch Socket out let combination 2 in 1, 3 pin, 5 Amps flush type 230 volts
109S & F switch Socket out let combination 2 in 1, 6/5 pin, 5 &15 Amps flush type 230 volts
110S & F ceiling rose surface bakelite, three terminals
111Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 8 way with having copper bus bars suitable for 200 amps rating including taking down old unserviceable one complete all as specified and directed.
112S & F in MCB single pole & neutral (SP&N), 16 to 32 Amps, 240 volts, 10KA, ‘C’ series, with proper size lugs and connections complete all as specified and directed.
113S & F in MCB single pole (SP) 6 to 32 Amps, 240 volts, 10KA, ‘B’ series, with proper size lugs and connections complete all as specified and directed.
114S & F in LED light fitting mirror type with high out put diffuser 2 feet, 10/12 watt 220 V AC Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square shape, Beam Angle 120° including connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and directed.
115S & F in Surface and wall mounted high efficacy 1x20 watt LED LED lighting fixture with extruded polycarbonate, Beam Angle 120° environmental friendly complete with all accessories internally pre wired and including connection up with twin core flexible copper conductior cable complete all as specified and directed.
116S & F in LED 10 watt inverter polycarbonate channel batten , Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours suitable for 180 volt to 250 AC volt, complete all as specified and directed
117S & F in LED light fitting 1X10W bulkhead luminaires including LED light holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
118S& F in steel body 300 mm sweep exhaust fan , heavy duty 230 volt complete all as specified and directed
119Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
120M & L for maintenance free GI earthing Electrode 2 mtr length shall be based on ready capsule type, Pipe-in-Cage technology concept in which, One Galvanized hollow pipe (Electrode) 50 mm dia filled with a specially developed earth enhancement material (EEM) made up of Conductive Cement, Graphite carbon powder, Sodium montmorillonite/ Sodium Bentonite Powder, Hydrous aluminum silicate etc. to reduce earth resistivity, 50kg Chemical , GI earthing Electrode buried directly in ground vertically to a depth not less than 2.0 meter below normal ground level and connected by means of galvanized bolts, nuts and washers with including necessary earth work and RCC moulded earth pit with cover, 15 mm dia pipe with watering funnel and GI earth wire 4.0 mm dia upto 7.5 RM connecting to MCB DB complete all as specified and directed and taking out old unserviceable earthing of any position complete all as specified and directed.
121Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 Core complete all as specified and directed.
122Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in hard/ dense soil for taking up/ laying cable/pipe etc completed all as apecified and directed.
123Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for hard/ dense soil complete all as specified and as directed.
124Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and as directed.
125Sand cushioning for under ground cable 8 cm before laying the cable and 15 cm after laying and streching the cable complete all as specified and directed.
126M&L Un-reinforced precast factory made concreate cable covers, class LV type-I, with flat size 250x150x40 mm complete all as specified and directed.
127Supply and laying/fixing, GI pipe medium grade 40 mm bore (dia)including all type fittings fixed on walls/to poles with clamps /laid in trenches as cable protection complete all as specified and directed.
128S&F 3- layer PP-R ( Polypropylene random copo lymer) pipes ISI marked, IS-15801, 32 mm SDR 7.4 (PN16) UV stabilized hot & cold PP-R pipe incl fusion joint, polypropylene random fittings laid in trenches /walls/ceilings or laying in floors complete all as specified and directed.
129Supply and fixing PP-R Gate valve (brass insert) suitable for 32 mm dia pipe complete all as specified and directed. Make : SFMC/Prince or equivalent.
130Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in hard/ dense soil for taking up/ laying cable/pipe etc completed all as apecified and directed.
131Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for hard/ dense soil complete all as specified and as directed.
132Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for hard/ dense soil complete all as specified and as directed.
133Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56564562
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.52 Lakhs
LAST DATE 06-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Provision Of Toilet And Bathroom For Jcos Living For Cg Bn At Base C -Ii Under Ge 873 Ews
Basic Detail
Tender No GE/873/EWS-64/2026-27
Bidding Type Tender
Location
City Leh
State Ladakh
Key Dates
Publish Date 17 Jul 2026
Submission Date 06 Aug 2026
Open Date 08 Aug 2026
Finance
Tender Value 38.52 Lakhs
Tender Fee 500
EMD 78000
Exemption Available
Document List
04a072b8-f0d6-4c1a-96f5-0ece3ba12543.html
BOQ_872877.xls
Tender64.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Aug 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

04a072b8-f0d6-4c1a-96f5-0ece3ba12543.html

xls

BOQ_872877.xls

pdf

Tender64.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders