Construction Of Combined Toilet And Bathroom Block With Soakage Pit At 212 Fd Wksp Coy Eme, 114 Inf Bde C , Construction Of Toilet Block With Soakage Pit 19 Armd Regt, Office Bldg No. T-500 At 22 Guards, 626 Sata Bty, Karu, 3 Idsr, Karu And Constr Of Wash
Tender Value
48.76 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
15 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Combined Toilet And Bathroom Block With Soakage Pit At 212 Fd Wksp Coy Eme, 114 Inf Bde C , Construction Of Toilet Block With Soakage Pit 19 Armd Regt, Office Bldg No. T-500 At 22 Guards, 626 Sata Bty, Karu, 3 Idsr, Karu And Constr Of Washing Point Near Jcos Or Living Accn At 34 Ap Under Tangtse And Karu, Ge 860 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n. exc 15 cm deep in hard/dense soil complete all as specified and directed. |
| 2 | Excavating in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and directed. |
| 4 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete etc complete all as specified and directed. |
| 5 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete for rough finished surfaces etc complete all as specified and directed. |
| 6 | Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, helves including sup- ports, overhangs, etc. also splays between floors and beams, etc. vertical or batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 7 | Formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed. |
| 8 | M&L for rough finished formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide rough finished surface of concrete complete all as specified and directed. |
| 9 | M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 10 | TMT bars for reinforcement 5mm to 10mm dia as in stirrups/spacers/binders etc. cut to length bent to shape required including bending cranking and hooking ends and binding with including MS wire not less than 0.9mm(annealed) dia complete all as specified and directed. |
| 11 | M & L RCC M-25 (Design Mix) (20mm graded aggregate) in foundations, including rafts,footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed. |
| 12 | M & L RCC M-25 (Design Mix) (20mm graded aggregate) in columns, pillars, piers, post and struts etc complete all as specified and as directed. |
| 13 | M & L RCC M-25 (Design Mix) (20mm graded aggregate) in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed. |
| 14 | M & L RCC M-25 (Design Mix) (20mm graded aggregate) in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed. |
| 15 | Returning filling in incl spreading leveling, watering, and well, ramming in layer n.exc 25 cm in layers in hard/dense soil complete all as specified and directed. |
| 16 | Removing excavated material (soil) to a distance n. exc50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed. |
| 17 | M&L Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, 10cm in thick and, setting in cement mortar 1:4 complete all as Specified. |
| 18 | M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 19 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete. |
| 20 | M & L for 10 mm thick rendering in cm (1:6) on fair faces of brick work or concrete surface finished the surface even & smooth without using extra cement, complete all as specified and directed. |
| 21 | Rendering 15mm thick in CM (1:4) using water proofing compound as per manufacturer's instruction in two layers, finished even and smooth surface without using extra cement - External Plaster (WPC measured and paid separately) complete all as specified and directed. |
| 22 | M&L for Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cm 1:4 complete all as specified and directed. |
| 23 | M&L for broken stone or boulder hard core of gauge not exc 63 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 24 | M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) 75 mm thick as in plinth protection and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for Cement Concrete type C-2, 1:3:6 (20 mm graded aggregate) - 100mm thick as Sub base complete all as specified and directed. |
| 26 | M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:4 complete all as specified and directed. |
| 27 | M&L for preparation of new plaster surfaces, and applying two coat of white wash on walls complete all as specified and directed. |
| 28 | M&L for preparation of new plaster surfaces, and applying two coat of white wash on ceiling complete all as specified and directed. |
| 29 | M&L for preparation of new plaster surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 30 | Supply only Integral water proofing compound for external plaster complete all as specified and directed. |
| 31 | S&F of 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 32 | S&F plain 2nd class hardwood 35mm thich framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 33 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 34 | S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 35 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 36 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 37 | S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 38 | S&F 250mm long, Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 39 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed. |
| 40 | S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty and glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 41 | S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 16 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilins or in floors etc. |
| 42 | S&F 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 20 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilins or in floors etc. |
| 43 | S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F 15 mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | S&F 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed. |
| 46 | S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 47 | S&F vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets including waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 48 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe including 100mm PVC 'P' trap complete all as specified and directed. |
| 49 | S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. |
| 50 | S&F for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed. |
| 51 | S&F urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed. |
| 52 | S&F 32mm Dia PVC waste pipe with fly nut, copling for sinks/urinals or wash basins etc. complete all as specified and directed. |
| 53 | S&F 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends complete all as specified and directed. |
| 54 | S&F 600mmX450mm bevelled edge mirror 5 mm thick of selected quality glass, mounted on 6mm thick AC building board or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 55 | S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 56 | S&F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed. |
| 58 | S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed. |
| 59 | S&F in repairs grating doom 75mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 60 | S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and directed. |
| 61 | S&F 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 62 | S&F 110mm dia bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed. |
| 63 | S&F 110mm dia bore PVC (SWR) bends complete all as specified and directed.complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F PVC(SWR) gully trap 110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 65 | M & L for 100mm thick Cement concrete type D- 2, 1:4:8 (Using 40mm graded crushed stone aggregate) in sub base complete all as specified and directed . |
| 66 | M & L for 25mm thick Cement concrete type B- 2, 1:2:4 (Using 20mm graded crushed stone aggregate) in floor to recive tile complete all as specified and directed. |
| 67 | Construcion of Soakage well exe, in hard/dense soil, foundation in PCC 1:3:6, well of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber stone masonry in CM, RCC cover slab in M-30/RR Masonry/Filling with brick bats complete of size 3.00mtr dia and 3.0mtr deep n etc.,complete all as specified and directed. |
| 68 | M&L for Reinforced concrete pipes, class NP2 of dia 200 mm , laid and jointed complete with collars in trenches complete all as specified. |
| 69 | M&L Concrete bed in cement concrete 1:4:8 type D-2(using 40mm graded crushed stone aggregate) to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed. |
| 70 | M&L for Providing precast reinforced cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) mangers, shelves and similar articles set in CM 1:6 complete all as specified and as directed. |
| 71 | M&L for Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I(1991) complete all as specified and as directed. |
| 72 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth (with out using extra cement) complete all as specified and directed. |
| 73 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard dense Soil complete all as specified and directed. |
| 74 | M & L for preparation of newly plastered wall/pillasters/vertical surface and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 75 | M&L preparation of new plastered or unplastered surfaces and applying two coats of oil bound distemper on wall over a coat of alkali resistant primer complete all as specified and directed. |
| 76 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing |
| 77 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 78 | S&F 150mm long Aluminium, anodised, barrel tower bolt, fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F Vitreous china ( EWC)pedestal pan and trap , including connection to drain ( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete including concrete and making good to floor. |
| 80 | S&F 15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed.complete all as specified and directed by engr-in-charge |
| 81 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm fixed complete all as specified and directed. |
| 82 | S&F of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 83 | S&F rotational moulded polythylene water storage tanks 500 ltrs ( cylindrical vertical with closed top) hoisted and fixed in position all specified complete all as specified and directed. |
| 84 | S&F 75mm dia bore PVC (SWR) bends complete all as specified and directed.complete all as specified and directed by Engr-in-Charge. |
| 85 | S&F 75mm dia bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed. |
| 86 | M&L for rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, plate sections) including distance pieces, cleats etc Grade of Fe 410-w Gde (E-250) complete all as specified and directed by Engr-in-charge. |
| 87 | M&L for preparation of new painted steel surfaces and applying two coat of synthetic enamel paint on surface of any description over 10cm width or girth complete all as specified and directed by Engr-in-Charge. (Note : Ladders, scaffolding will be provided by Contractor where required) |
| 88 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long |
| 89 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 90 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 91 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion weldedat all corners,mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. indepth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 92 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed by Engineer in Charge. |
| 93 | Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in hard/dense soil complete all as specified and directed by Engineer in Charge. |
| 94 | M & L for PCC 1:3:6 type C-2 (Nominal Mix) 150mm thick using 40 mm graded stone aggregate as in foundation filling mass concrete and similar work complete all as specified and directed by Engineer in Charge. |
| 95 | M& L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:4 complete all as specified and directed by Engineer in Charge. |
| 96 | M& L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed by Engineer in Charge. |
| 97 | M & L for providing RCC type B-1 1:2:4 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as complete all as specified and directed by Engineer in Charge. . |
| 98 | M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in cover slab for manholes set in CM 1:4 including necessary form work complete all as specified and directed by Engineer in Charge. |
| 99 | S&F PVC(SWR) pipes single socketed in any length 75 mm dia with rubber joints fixed to walls complete all as specified and directed by Engineer in Charge. |
| 100 | S&F PVC(SWR) vent cowl of dia 75 mm complete all as specified and directed by Engineer in Charge. |
| 101 | M & L for RCC M30 ( Design Mix ) (Using 20mm graded crushed stone aggregate) in footing, plinth beam complete all as specified and directed. |
| 102 | M&L for RCC M-30 ( Design Mix ) (Using 20mm graded crushed stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 103 | M&L for RCC M30 ( Design Mix ) (Using 20mm graded crushed stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 104 | S&F for 30mm thick 1st class hardwood Plain, framed, panelled door shutters(any number of panels), with panels of timber flat on both sides (feather edged), veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed. |
| 105 | S&F in repair One piece European WC viterus china with S/P trap & slow motion seat cover as per Cera part no. S1014124 or equivalent approved in CENC of Jaguar/Hindware etc complete all as specified and directed by Engr-in-Charge. |
| 106 | S&F viterous china wash hand basin (WHB), white flat/angle back size 630 x 450mm with padestal tall etc complete all as specified and directed. |
| 107 | M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismatling of stone slb complete all as specified and directed. |
| 108 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm |
| 109 | S&F PVC(SWR) floor trap 110mm, setting and jointing with solvent cement complete all as specified and directed. |
| 110 | Point wiring with 1.5 Sq.mm. FRLS PVC insulated unsheathed copper conductor multi stranded 1100 Volts grade, ISI marking drawn through and including non metallic PVC rigid concealed conduit and conduit accessories medium grade, ISI marked, including modular metal flush box with and including modular white cover plate with frame for mounting modular switches/sockets/fan regulators etc. including one run of 1.5 Sq.mm. PVC insulated unsheathed copper cable for earth continuity, connected to earth dolly, for One light point controlled by one switch or One fan (ceiling fan/exhaust fan/wall mounted/air circulator) point controlled by one switch or one 3 pin socket outlet 5 Amps on independent board on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 111 | Description all as per Srl item No. 110.00 here-in-before but for one socket outlet 3 pin, 5 Amps on same board. |
| 112 | Description all as per Srl item No. 110.00 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sq.mm copper conductor (Multi stranded) insulated and unsheathed electric cable 1100 Volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 sqmm copper stranded conductor as continuous earth wire connected to common earth dolly comoplete all as specified and directed by Engr-in-Charge. |
| 113 | Supply and fix of Switch piano flush type single pole, one way 5 Amp , all as specified. |
| 114 | Supply and fixing switch socket combination 2 in1, f;ush type complete all as specified and directed by Engr-in-Charge. |
| 115 | Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge. |
| 116 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 117 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all specified and as directed by the Engineer-in-Charge. |
| 118 | Supply and fixing LED lights fitting mirror type with high output diffuser 2 feet, 10 watt 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all specified and as directed by the Engineer-in-Charge. |
| 119 | Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 09 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge. |
| 120 | Supply and fixing LED lamp 09/10 watt complete all as specified and directed by the Engineer-in-Charge |
| 121 | S & F LED light fitting 1x9w/1x10 watt bulk head fitting luminaires LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge. |
| 122 | Supply and fixing sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge. Make : Schneider Elect / Legrand / C&S / Hager |
| 123 | Supply and fixing MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge. |
| 124 | Supply and fixing MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 125 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion . |
| 126 | Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge |
| 127 | Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cable and getting out in hard and dense soil, complete all as specified and as directed by the Engr-in-Charge. |
| 128 | Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat Size 250mm x 150mm x 40mm thick complete all as specified. |
| 129 | Material and labour for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying , streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. |
| 130 | Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 16 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender