Tender For Restoration Of Rain Damages To Water Supply Scheme Passal Sukhbag In Tehsil Joginder Nagar Distt Mandi (Hp). (Sh:- Construction of Intake Chamber = 03 Nos , Butt Welding Of 65 Mm & 100 Mm Dia And Construction of Anchor Block) Under Pdna
Tender Value
1.64 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
1 days left
EMD
3284
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Water Supply Scheme Passal Sukhbag In Tehsil Joginder Nagar Distt Mandi (Hp). (Sh:- Construction of Intake Chamber = 03 Nos , Butt Welding Of 65 Mm & 100 Mm Dia And Construction of Anchor Block) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work,lifts up to 1.50 meters atacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacking soil in 15cm .layers, when required in to plinths sides of foundations etc, consolidating each deposted layer by ramming and watering and then deposing of all surplus excavated earth as directed with in a lead of 20 metres in all respect with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth. |
| 3 | P/L cement conc 1: 1½ :3 (1cement:1:1½ sand :3 graded stone agg. 20mm nominal size) and curing complete excludidng cosot of form work and reinforcement for RCC work in foundation and plinth with in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge |
| 4 | Foundations, footings, basses of columns and the like and mass concrete in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 5 | Walls (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and strining courses etc.from top of foundation level upto floor two level in all leads and lifts as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 6 | Providing and laying cement concrete 1:2:4(1cement:2sand:4graded stone agg.20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work |
| 7 | Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers upto floor two levels |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work in:- |
| 9 | Vertical surfaces such as Walls ( any thickness but attached pilasters, buttresses, plinth and string courses etc. and the like complete in all leads and lifts. |
| 10 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position i /c binding wire complete up to floor two level complete in all respectas per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts. |
| 11 | Providing and fixing CI man hole cover with frame 455 x610 mm rectangular CI cover ( Light duty) weight of cover and frame is 38 kg. |
| 12 | Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: - Foundation and plinth in anchor block |
| 13 | Repair & Maintanace of gravity main and rising main of various diameters i.e by Welding two layres to GI/MSERW pipes and carriage of welding set and DG Set by mechanical transport and head load up and down side complete job in all repect and to the entire satisfaction of the Engineer-in-Charge. |
| 14 | 100 mm dia |
| 15 | 65 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender