Tender For Restoration Of Water Supply Scheme Bhajrala Sandral In Gp Matroo In Tehsil Joginder Nagar Distt Mandi (Hp) (Sh: Construction of Reinforced Cement Concrete Storage Tank 20000 Ltr Capacity )
Tender Value
2.23 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
1 days left
EMD
4468
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Water Supply Scheme Bhajrala Sandral In Gp Matroo In Tehsil Joginder Nagar Distt Mandi (Hp) (Sh: Construction of Reinforced Cement Concrete Storage Tank 20000 Ltr Capacity )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work,lifts up to 1.50 meters atacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacking soil in 15cm .layers, when required in to plinths sides of foundations etc, consolidating each deposted layer by ramming and watering and then deposing of all surplus excavated earth as directed with in a lead of 20 metres in all respect with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6(1cement :3 sand : 6 graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts: a) Foundation and Plinth complete in all respect with in all leads and lifts as per the direction of Engineer in charge. |
| 3 | Providing & laying cement concrete 1:1.5:3 (1 cement 1.5 sand 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement of RCC work in foundation with in all leads lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 4 | Foundation footings bases of column and the like and mass concrete as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 5 | Walls ( any thickness but not less than 0.1 mtr. Thickness) attached pilasters, buttresses, plinth and string courses etc. from top pf foundation level up to floor two level in all leads and lifts. |
| 6 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work in:- |
| 7 | Flat surface such as soffits and suspended floors, roofs, landings and the like: Floors etc. up to 200mm in thickness within all leads and lifts |
| 8 | Vertical surfaces such as Walls ( any thickness but attached pilasters, buttresses, plinth and string courses etc. and the like complete in all leads and lifts. |
| 9 | Providing and laying cement concrete 1:2:4(1cement:2sand:4graded stone agg.20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work |
| 10 | Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers upto floor two levels |
| 11 | Providing mild tor steel reinforcement for RCC work including bending, binding and placing in position i/c binding wire complete up to floor two level complete in all respect as per direction & to the entire satisfaction of engineer in charge upto all lead & lifts. |
| 12 | White washing with lime on undecorated wall surfaces(two coats) to give an even shade I/c thoroughly brooming the surface to remove all dust dirt & other foreign matter as per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts. |
| 13 | Providing and fixing 3.15 mm MS sheet manhole cover 600 x 600 mm with locking arrangrment as per the direction of Enginer in charge. |
| 14 | Laying jointing and testing in trenches GMS tubes (LG) tube fittings ( earth work in trenches to be measured and paid separetly). |
| 15 | 25 mm dia nominal bore |
| 16 | Providing and fxing gun metal whel valve 25 mm dia as per the direction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender