Tender For Restoration Of Rain Damages Of Lwss Dhurli Samoun In Tehsil Lad Bharol Distt Mandi (Hp)(Sh: - Repair Of 30 Hp Motors Make Cromton & Cast Iron Nrv & Sluice Valve, 6 Mm Sqmm Wire, Cleaning Of Centrifugal Pump Rkb 40/9, Common Head Set No. 1
Tender Value
1.37 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
2 days left
EMD
2749
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Dhurli Samoun In Tehsil Lad Bharol Distt Mandi (Hp)(Sh: - Repair Of 30 Hp Motors Make Cromton & Cast Iron Nrv & Sluice Valve, 6 Mm Sqmm Wire, Cleaning Of Centrifugal Pump Rkb 40/9, Common Head Set No. 1 )
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding of 30 HP motor along with insulated mateial such as copper wire complete in all respect as per the satisfaction of Engineer in charge. |
| 2 | Providing and fixing of ball bearing No. 6312 make SKF India complete in all respect as per the satisfaction of Engineer in charge. |
| 3 | Providing and fixing of bearing sleeve DE+NDE complete in all respect as per the satisfaction of Engineer in charge. |
| 4 | Providing and fixing of rotor bearing sheet complete in all respect as per the satisfaction of Engineer in charge. |
| 5 | Providing and fixing of copper thimble of 75 Amp sizes complete in all respect as per the satisfaction of Engineer in charge. |
| 6 | Providing and fixing of new coupling for complete in all respect as per the satisfaction of Engineer in charge. |
| 7 | Providing and errection of grease for electric motor complete in all respect as per the satisfaction of Engineer in charge. |
| 8 | Providing and fixing of rubber coupling motor for electrical cnnection complete in all respect as per the satisfaction of Engineer in charge. |
| 9 | Providing and fixing of connection plate for electrical cnnection complete in all respect as per the satisfaction of Engineer in charge. |
| 10 | Providing and fixing of nut & boly 5/8 x 3 \\" long complete in all respect as per the satisfaction of Engineer in charge. |
| 11 | Providing and fixing of double flanged cast iron 80 mm dia sluice valves PN- 1.6 make Kirlosker/Leader/Kartar for the section pipe of the pump and capable of with standing the normal seat pressure as per IS: 780 - 1984 with up to date ammendments complete in all respect sa per the satisfaction of Engineer in charge. |
| 12 | Providing and fixing of water proof cable 3 core 6 sqmm as per IS- 674- Part - II 1964 siuable for above pump set from starter to pump set , subject to the approval od HPSEB authority as per the satisfaction of Engineer in charge. |
| 13 | Providing and fixing of transformer oil complete in all respect as per the satisfaction of Engineer in charge. |
| 14 | Providing and fixing double flanged 80x65x80 mm piping work layout to be approved by Engineer in charge for suction and delivery pipes suitable to pump (s) offered and common header as per the rising main respectively complete with all specilas such as bends, tees, reducers/ incereser with companion flanges matching with the reloevent specifications of the accessories including rubbers / asbestos gasket of minimum 3 mm thickness as per IS 2712-1979 and required numbers of nuts and bolts as per IS : 1364-1983 as per the satisfaction of Engineer in charge. |
| 15 | Carriage of motor from a work site to a workshop for dismentling, reapir and subsquent reinstallation at the site, , all as per the direction and satisfaction of Engineer in charge. |
| 16 | Centrifugal pump RKB 40/9 Isolate the pump, remove the casing and impeller, clean componenets with a soft brush, then thoroughly rinse and dry before reassenbling complete in all respect as per the satisfaction of Engineer in charge. |
| 17 | Providing and fixing of new ball bearing NU. - 206 C3 make India complete in all respect as per the satisfaction of Engineer in charge. |
| 18 | Providing and fixing of new ball bearing No. 7304 C3 make SKF India complete in all respect as per the satisfaction of Engineer in charge. |
| 19 | Providing and fixing of double flanged cast iron 65 mm dia sluice valves PN- 1.6 make Kirlosker/Leader/Kartar for the section pipe of the pump and capable of with standing the normal seat pressure as per IS: 780 - 1984 with up to date ammendments complete in all respect sa per the satisfaction of Engineer in charge. |
| 20 | Carriage of motor from a work site to a workshop for dismentling, reapir and subsquent reinstallation at the site, , all as per the direction and satisfaction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender