Tender For Mul Growth Centre...M & R To Pwss...Providing Repairs & Partial Replacement Of Damaged Psc Gravity Main At River Bridge Approach.
Tender Value
41.53 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
7 days left
EMD
41600
Bank guarantee accepted
Document Fee
10030
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mul Growth Centre...M & R To Pwss...Providing Repairs & Partial Replacement Of Damaged Psc Gravity Main At River Bridge Approach.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A1/259) |
| 2 | Lift 0 to 1.5 M |
| 3 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, reparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) |
| 4 | Lift 0 to 1.5 M |
| 5 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete |
| 6 | Filling in plinth and floors / trenches with contractors murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) |
| 7 | CI PIPES |
| 8 | Providing D .I. p ipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edi- tion/revision with amendments for Rubber Gaskets. Note: For DI pipe supply from MJP 18% GST would be applicable. Same should be considered for estimation purpose. |
| 9 | a) ( IS:8329-2000 Latest Version) D.I. K-7 |
| 10 | 6) 350 mm |
| 11 | Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. Note : Only SBR Rubber gaskets to be used as per. Only 85 % rate shall be payable till satisfactory Hydraulic testing is given. |
| 12 | b) C.I. ‘L.A. ' Class / Mortar inlined DI K-9/K-7 Without Rubber Rings With Rubber Rings |
| 13 | 8) 350 mm |
| 14 | Hydraulic testing of C .I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able toprovide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. |
| 15 | b) With Rubber Rings |
| 16 | 8) 350 mm. |
| 17 | Providing and supplying ISI standard M S s pecials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. |
| 18 | 1) Machine ends suitable for PSC pipes of all diameters as per detailed drawing with 10 mm thick x 0.7 M long barrel welded to it |
| 19 | 6) MS barrels (pipe pieces) locally manufactured(for small quantities) |
| 20 | Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine andforming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railwaywagon, loading into truck,transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). |
| 21 | Dia of Pipe : 350.00 mm (I. D.) Thickness of pipe : |
| 22 | 4) 8.00 mm. |
| 23 | Lowering, laying in position to correct line and level including M. S. pipes with / without any outcoating on pedestals or chairs upon prepared formation. The rate to include loading, unloading, hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified. |
| 24 | 5 mm to 8 mm thick |
| 25 | ii)) Above 250 mm. Upto 500 mm. dia |
| 26 | Lowering, laying in position to correct line and level including M. S. specials with / without any outcoating such as distance pieces, straps, bends, tapers, etc. on pedestals or chairs upon formation. The rate to include loading, unloading,hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500M etc. complete. |
| 27 | 5 mm to 8 mm thick |
| 28 | ii)) Above 250 mm. Upto 500 mm.dia |
| 29 | Transporting within 500 meters,laying in position to correct line and level M. S. pipes with / without any outcoating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, etc. complete as specified |
| 30 | 5 mm to 8 mm thick |
| 31 | ii)) Above 250 mm. Upto 500 mm. dia |
| 32 | Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification |
| 33 | 8 mm. |
| 34 | Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the length upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary. |
| 35 | Extra work initial km |
| 36 | 1) Upto 600 mm. dia. (I.D.) |
| 37 | Providing and supplying D.I. fittings with I SI mark Mechanical j oint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of blackbitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by Gol and GoM in all respect etc. complete. D.I. FITTINGS (Mechanical Joints) |
| 38 | Double Socket Bend 45 degree |
| 39 | 7) 350 mm dia |
| 40 | Double Socket Bend 22.5 degree |
| 41 | 7) 350 mm dia |
| 42 | MJ Collar/Coupling |
| 43 | 7) 350 mm dia |
| 44 | Double socket bend 90 degree |
| 45 | 12.4.1) 350 mm dia. |
| 46 | Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness. |
| 47 | ii) Above 5 mm. Upto 10 mm. |
| 48 | M.S. Flanges |
| 49 | Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size and thickness with both side machined. |
| 50 | PW 10-2) Above 300 NB |
| 51 | Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. |
| 52 | 350 mm dia |
| 53 | Supply of C. I . Mechanical Compression Collar Coupling suitable for C. I. Spun Pipes ( as per - IS - 1536 /2001) and complete with sealing rubber gasket of SBR,.C.I. follower Glands and M.S. nut Bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. |
| 54 | 350 mm dia |
| 55 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) |
| 56 | Foundation on Murum and Harder Strata. |
| 57 | 1) upto 150mm |
| 58 | Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete. |
| 59 | Air Valve Double Ball Flanged Type - PN -1 |
| 60 | 1) 100 mm |
| 61 | Lowering, laying and f ixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves). |
| 62 | Air Valve Double Ball (PN1 and PN - 1.6) |
| 63 | 9) 100 mm |
| 64 | Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layersincluding hand packing and compacting, etc. complete. (Bd-A-12/264) |
| 65 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
| 66 | (Cement 5.90 bags / cum) Spec. No.- Bd E /1 Page No. 287 and B-7, Page No. 38 |
| 67 | 2) In PCC M-150 |
| 68 | Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) |
| 69 | In RCC M-200 |
| 70 | Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306) |
| 71 | Corrosion Resistant Steel (Fe 500) |
| 72 | Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-incharge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) Note: Only 75% rate shall be payable till satisfactory hydraulic testing is given. |
| 73 | 350 mm |
| 74 | Providing and applying one coat of gamma coating or equivalent such as Dr.Bake, Krishna Conchem, Asian Paint, Atul Limited, Burger Paint, epoxy primer 50 to 60 microns thick and covering two coats of gamma coatings or equivalent such as Dr. Bake, Krishna Conchem, Asian Paint, Atul Limited, Burger Paints 30 microns thick each to new M.S. pipes and structural steel or concrete surface including repainting the surface by finishing by solvent degreasing and de- rusting by applying chemical method and scaffolding if necessary, etc. complete as per manufacturer's specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender