Tender For Repairs And Maintanance For Mini Power Pumps, Hand Pumps And Replacement And Attending Of Pumping Mains And Distribution Pipe Line Leak (Damaged) Work @ Ward No: 24,25,26,27,29 In Pudukkottai City Municipal Corporation
Tender Value
10 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
14 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pudukkottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintanance For Mini Power Pumps, Hand Pumps And Replacement And Attending Of Pumping Mains And Distribution Pipe Line Leak (Damaged) Work @ Ward No: 24,25,26,27,29 In Pudukkottai City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ (± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection,Indication lamp, starting capacitor, running capacitor and On/Off Push butt on switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 2 | 1 HP Panel Board |
| 3 | 1.5 HP Panel Board |
| 4 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 5 | 5 HP Panel Board |
| 6 | Supply and delivery of clear water vertical wet type SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITHOUT PANEL BOARD and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %, 50 HZ +/-5 % |
| 7 | 15 lpm x 90 m (1.00 HP) |
| 8 | 15 lpm x 125 m (1.50 HP) |
| 9 | PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE COPPER CABLE CONFIRMING TO IS 694/1990 AND AS AMENDED THEREAFTER. Including cost and conveyance of all material and labour charges etc., complete as per standard specification. |
| 10 | 2.5 sq.mm |
| 11 | 4.0 sq.mm |
| 12 | HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) 32mm dia Including cost and conveyance of all material and labour charges etc., complete as per standard specification. |
| 13 | Supply and delivery and fixing of Nylon Rope for Bore well Including cost and conveyance of all material and labour charges etc., complete as per standard specification. |
| 14 | Supply and delivery and fixing of HDPE tank 1000 litres as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 15 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 16 | Construction of pedestal for HDPE tank including earth work, PCC, brick work, plastering and painding charge for Pedestal size of 1.3m dia and .60m height. And Supply and delivery and fixing of HDPE tank 1000 litres as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 17 | Construction of pedestal for kiosk including earth work, PCC, brick work, plastering and painding charge for Pedestal size of 0.75x0.45x1.30 m and Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., |
| 18 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 65) |
| 19 | Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under Labour charges for the erection of submersible pumpset in borewell/openwell |
| 20 | Upto 5 HP |
| 21 | Above 5.00 HP to 10.00 HP |
| 22 | Re-erection of centrifugal pumpsets, jet pumpsets and its accessories into the borewell/ openwell after attending the repairs 50% of the rate mentioned under Labour charges for the erection of submersible pumpset in borewell/openwell |
| 23 | Upto 5 HP |
| 24 | Above 5.00 HP to 10.00 HP |
| 25 | Rate for flushing of borewell of 6\\" dia requiring less than 4 hours operation using drill rods/hose with required size of pipes for various capacity compressor including transportation, labour, and fuel charges for compressors as directed by the Department Officer and conducting yield test by ‘V’ notch method if required. 125 Cfm (100 PSI) |
| 26 | Supply of Borewell and Power pump materials and parts required for attanding the repairs in pumps and motors. |
| 27 | 32mm SS hose collar |
| 28 | 32mm H Nipple |
| 29 | 150mm bore cover |
| 30 | 32mm Bore clamp |
| 31 | 32mm GI Union |
| 32 | 32mm GI Coupling |
| 33 | 32mm GI bend |
| 34 | 1 HP to 5 HP motor bush |
| 35 | Impeller |
| 36 | Condencer for starting |
| 37 | Condencer for Running |
| 38 | Motor bearing |
| 39 | 1HP Submersible motor rotor |
| 40 | Labour charges for attending the repairs and refunctioning of assembly as directed by Department officials. |
| 41 | 7.5HP Monoblock motor repairing charges |
| 42 | 1HP Submersible motor rewinding charges |
| 43 | 5HP Submersible motor rewinding charges |
| 44 | 7.5HP Submersible motor rewinding charges |
| 45 | 5HP Monoblock motor rewinding charges |
| 46 | 7.5HP Monoblock motor rewinding charges |
| 47 | 1HP to 12.5HP starter relay |
| 48 | Single phasing preventer |
| 49 | 1HP to 10HP submersible motor thrust bearing |
| 50 | Supply and delivery of G.M GATE VALVES AS PER IS BS 5154 and related IS Specifications Including cost and conveyance of all material and labour charges etc., complete as per standard specification. |
| 51 | Labour charge of GM gate valve removal and refixing including earth work and refilling the pit etc., complete as per standard specification. |
| 52 | 50mm to 80mm |
| 53 | Replacement and Attending of PVC pumping mains and distribution pipe line leak (damaged) work., including cost of earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of PVC pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the earthwork etc complete and as directed by the Department officers. |
| 54 | 63 mm burst |
| 55 | 75 mm burst |
| 56 | 90 mm burst |
| 57 | 110 mm burst |
| 58 | 140 mm burst |
| 59 | 160 mm burst |
| 60 | 200 mm burst |
| 61 | Replacement and Attending of DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 pumping mains and distribution pipe line leak (damaged) work., including cost of earthwork excavation in all soil strata, including BT/CC road cutting, removal of slushy soil and replacing the pipeline with sound pipe, including supply and delivery of DUCTILE IRON SOCKET/SPIGOT PIPES pipes, couplers, jointing materials and required specials, cutting, conveying , laying, jointing and cost of refilling for the earthwork etc complete and as directed by the Department officers. |
| 62 | 150 mm burst |
| 63 | 200 mm burst |
| 64 | 300 mm burst |
| 65 | Attending repairs to deep well handpumps for borewells inclusive of removal of G.I. Pipes, Plunger rods, Cylinder and re-erection of hand pumps inclusive of lowering the GI Pipes Plunger rods cylinder, jointing etc. |
| 66 | Upto 30 M |
| 67 | Supply and delivery of following Hand pump specials etc., Including cost of material and transport any were in tamil nadu etc., complete. |
| 68 | Plunger set |
| 69 | Cylinder body |
| 70 | Bolt nut plate washer |
| 71 | 32mm Dia GI Raiser pipe B class (10 feet) |
| 72 | 32mm Dia GI coupling |
| 73 | 32mm Dia GI pipe cutting charge |
| 74 | 32mm Dia GI pipe threading charge |
| 75 | 15mm Dia connecting rod (10 feet) |
| 76 | Hand set |
| 77 | Bottom stand Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender