Tender For special Repair Cariappa Hall Auditorium Including Connecting Toilet Block And Allied Wks At anganwadi center Under Ge (Awc) Mhow
Tender Value
47.06 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
15 days left
EMD
94200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Cariappa Hall Auditorium Including Connecting Toilet Block And Allied Wks At anganwadi center Under Ge (Awc) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | M & L Double charged Vitrified tiles of size 600 mm x 600 mm 10 mm thick following the specifications as per IS 15622-2006, cut to required size set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles as in floor incl screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying of floor tiles incl dismantling of floor tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. Note : Light Shade/ Dark Shade/ Colour/ Design of the tiles as approved by GE. |
| 2 | M & L Double charged Vitrified tiles of size 600 mm x 600 mm 10 mm thick following the specifications as per IS 15622-2006, cut to required size set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles as in skirting/ Dados incl layer of mortar 10 mm thick in CM 1:4 for fixing of tiles incl dismantling of floor tiles including bedding (but not backing), and rubbish off premises or removed to store complete all as specified and directed. Note : Light Shade/ Dark Shade/ Colour/ Design of the tiles as approved by GE. |
| 3 | M&L FibretteTile of 'Wood fiber Cement Composite '1mm width wood fiber 25 mm thick of size 600x1200mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results. including taking down old wall panelling and similar work and removing to store complete all as specified and directed. |
| 4 | Providing & fixing False ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws incl dismantling of old False Ceiling. The work shall be carried out as per specifications, drawing and as per directions. |
| 5 | M&L Modular Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 incl demolition of old brick work or stone/ boulder masonary built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 6 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:4 and to be finished even and smooth without using extra cement incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 7 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 8 | M&L for applying Two coats of oil bound distemper on wall or concrete over a coat of primer over 1 mm thick Wall Care Putty including preparation on newly plastered surfaces complete all as specified and directed. |
| 9 | M&L for applying Two coats of oil bound distemper on wall or concrete over a coat of primer over 1 mm thick Wall Care Putty including completely removing the layer of old surfaces including old putty work complete all as specified and directed. |
| 10 | M&L for 16 mm thick Granite slab, polished as mirror finish without any hairline crack, as in cooking platforms, steps, window cills, incl proper edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling and rubbish off premises or removed to store complete all as specified and directed. |
| 11 | M&L Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth incl taking down old cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of ceilings and apply three coats of white wash complete all as specified and directed. |
| 13 | M&L for preparation of old painted surfaces and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 14 | M&L for PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in sub-base flooring 25 mm thick (levelling course) surface finished even and rough to receive the topping layer incl demolition of old unreinforced sub base pcc complete all as specified and directed. |
| 15 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 16 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 17 | S&F in repair Collapsible steel gates ,top hung,consisting of channels picktes ,pivoted,flat bars ,top and bottom runners ,brass handles etc. as specified ,erected in position and securing runners with holdfasts and brackets complete all as specified and directed. |
| 18 | Providing and fixingfactory made white Upvc casement laminated openable door made with integrated fixed panel,fabricated from multi chambered Upvc PROFILES (Frame 67x62mm Sash67x115mm,T profiles 78.4x67mm).2.3mm wall thickness +- 0.2mm,duly reinforced with 1.20+0.2 mm thick galvanized mild steel section made from roll forming process of required length(shape and size according to uPVC profile )EPDM gaskey zinc alloyed white powder coated hardware (casement handle3D hinges,multipoint lock,strikes plate), and provision for 5mm toughned glass in shutter with 8mmx100mm anchor fasteners all as per design and manufacturer complete all as specfied and directed. |
| 19 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (108 mm x 52 mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)Note : Area not exceeding 2.00 sqm each |
| 20 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 incl dismantling wrought iron or mild steel work of any description complete all as specified and directed. (Note :-The rates include for riveting and/or welding as directed and fixing with screws, bolts, etc. complete) |
| 21 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 22 | M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. (Note :- The rates include for hardwood and rebated holes for hold fasts, bolts or screws including pelletting to heads.) |
| 23 | S&F Anodised aluminium door shutters , aluminium section weighing 0.55kg/m including necessary joining cleats ,glazing clips ,ruber neoprene packing ,handles 2 Nos in each door ,hinges ,anodised aluminium snap beading screws etc complete all as specified and directed |
| 24 | S&F Flush shutters 40 mm thick, solid core construction, with particle board core and plywood face panels, both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. (Note : The rates for flush shutters include for the provision of suitable blocks for taking mortice locks, latches, or other fittings.) |
| 25 | S&F 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 26 | S&F 150 mm long Brass barrel tower bolts, but with barrel of extruded section complete all as specified and directed. |
| 27 | S&F 300 mm Extruded brass handles, fabricated type polished complete all as specified and directed by Engr-In-Charge. |
| 28 | M&L for 100mm long Butt hinges, extruded brass with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 29 | S&F Floor door stopper 150 mm to 250 mm overall length (as approved by GE) of cover plate of of brass body and tongue with hard drawn steel spring , fixed in floor. complete as directed. |
| 30 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 375 mm length of bolt complete all as specified and directed. |
| 31 | Providing and fixing factory made uPVC white colour fixed / louvered ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)Note : Area not exceeding 1.00 sqm each. |
| 32 | Providing and fixing factory made uPVC white colour fixed / louvered ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)Note : Area exceeding 1.00 sqm each. |
| 33 | S&F in repair Brass made Double Curtain Rods 25 mm dia with abstract finial & brackets and globe at the end (as approved by GE) complete all as specified and directed. |
| 34 | S&F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. (Note : The Glass may be transparent or tinted as approved by GE) |
| 35 | S&F 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 36 | S&F 12 mm thick Toughned glass as in hinged Doors having locking system at the centre and similar work including cutting to shape, drilling holes required, including 400 mm long handles @ each shutter incuding necessary suitable arrangement of floor spring as required on ground complete all as specified and directed.. (Note : (i) All measurements of cutting shall, unless otherwise stated, include the consequent waste and breakages involved. (ii) The rate includes for any framing required as per site condition.) |
| 37 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, chains, square bars, cicular bars, etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of old railing complete all as specified and directed. |
| 38 | S&F Solid / Perforated +PVC Wall lining 3consisting of 5mm thickWood grain printed PVC Sheet inclusive of solvent cement* and fixing at site on frame with SR 998 adhesive as per specifications and drawing completeall as specifieand directed.( A groove of 2mm may be left at the joint of two panels for asthetic look.) |
| 39 | S&F Solid PVC frame (Single Rebated) of size 60mm x30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and shown on drawing complete all as specified and directed. |
| 40 | M&L for non-skid ceramic coloured ceramic tiles of design- as approved 7 to 8 mm thick ( square /rectangular) area of each tile n. exceeding 0.11 sqmbut not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 41 | M&L for glazed cramic coloured tiles 350x250x7 mm/450x350x7 mm thick on vertical surface such as dado/skirting/riser steps etc ec jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over complete all as specified and directed. |
| 42 | M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 43 | M&L for 10mm thickin CM 1:4 on brick or concrete surface complete all as specified and directed. |
| 44 | S&F Viterous china urinal bowl,Half stall type,white (exluding flushing cistern ,flush pipe and waste pipe complete all as specified and direcetd. |
| 45 | S&F waste coupling PTMT (half or full threaded)Minimum weight 32mm-45gms/40mm-60gms complete all as specified and directed. |
| 46 | S&F Grating doom 125mm dia of PTMT (Minimum weight 25gms )complete all as specified and directed. |
| 47 | S&F Shelf of PTMT Fixed with and including Chomium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed. |
| 48 | S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed. |
| 49 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 50 | S&F PVC waste pipe for WHB etc all as specified and directed. |
| 51 | S&F angle cock,15mm bore dia fancy type chromium plated with capstain head ,high pressure ,screwed down,screwed for iron pipe or for brass ferruled fixed to iron pipe complete all as specified and directed. |
| 52 | S&F Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 53 | S&F viterous China wash Basin,white angle back (counter type), size 600mmx480mm white, excluding taps ,waste ,chain,and plug and pocelain stopper but including bracketrs with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 54 | S&F in repair Viterous China premium /1st quality wash down water closet wall hung /floor mounted cascade pattern EWC Ivory white/off white(closed pattern incl all necessary accessories like rag bolts /gel gasket etc.)complete all as specified and directed. |
| 55 | S& F Wash down water closet china white pedestal pattern with 'P' or 'S' trap including connecting to out going drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed. |
| 56 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and direceted. |
| 57 | S&F 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed. |
| 58 | S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed top) 1000litre capacity hoisted and fixed in position complete all as specifed and directed. |
| 59 | Supplying and laying of CPVC pipes with outer dia 20mm SDR 11 & Plain cpvc SDR 11 fittings on walls /ceiling or laying in floor complete all as specified and directed. |
| 60 | Supply and laying of CPVC pipes with outer dia 25mm SDR 11 and plain CPVC SDR 11 fitting on walls /ceiling or laying in floors complete all as specified and directed. |
| 61 | S&F Brass Elbow for CPVC pipes with outer dia 20mm complete all as specified and directed. |
| 62 | S&F Brass Elbow for CPVC pipes with outer dia 25mm complete all as specified and directed. |
| 63 | S&F Brass Elbow Rd (3/4X 1/2) for CPVC Pipes with outer dia 20mm complete all as specified and directed. |
| 64 | S&F Brass Tee for CPVC Pipes with outer 20mm complete all as specified and directed. |
| 65 | S&F Brass Tee for CPVC Pipes with outer 25mm complete all as specified and directed. |
| 66 | S&F Male Brass Threaded adaptor (MTA/MBTA)for CPVC pipes with outer 20mm complete all as specified and directed. |
| 67 | S&F Male Brass Threaded adaptor (MTA/MBTA)for CPVC pipes with outer 25mm complete all as specified and directed. |
| 68 | S&F Female Brass Threaded adaptor (FTA/FBTA) for CPVC pipes with outer dia 20mm complete all as specified and direcetd. |
| 69 | S&F Female Brass Threaded adaptor (FTA/FBTA) for CPVC pipes with outer dia 25mm complete all as specified and direcetd. |
| 70 | S&F Tank adaptor for CPVC Pipes with outer dia 20mm complete all as specified and directed. |
| 71 | S&F Tank adaptor for CPVC Pipes with outer dia 25mm complete all as specified and directed. |
| 72 | S&F Union for CPVC pipes with outer dia 20mm complete all as specified and directed. |
| 73 | S&F Union for CPVC pipes with outer dia 25mm complete all as specified and directed. |
| 74 | S&F Ball valves for CPVC Pipes with outer dia 25mm complete all as specified and directed. |
| 75 | S&F 15mm bore chromium plated central hole basin mixer single lever without popup waste system with 450mm long braided hoses complete all as specified and directed. |
| 76 | S&F Brass chromium plated tubular towel rail 20 mm dia ,D type ,60cm long between flanges complete all as specified and directed. |
| 77 | S&F Soap dish,viterous china white ,approximate size 160x160x90mm complete all as specified and direceted . |
| 78 | S&F PVC (SWR) pipes 110mm bore single socketed inany length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 79 | S&F PVC (SWR ) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 80 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors ,trenches complete all as specified and directed. |
| 81 | S&F 75mm bore PVC (SWR) Soil ,waste and vent pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and drected |
| 82 | S&F Stack clamps made out of dia 50x5 mm flat iron ,16mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 83 | S&F Stack clamps made out of dia 50x5 mm flat iron ,16mm dia round iron stays including bolts and nuts and securing ends of stay to wall or roof for 75mm PVC pipe complete all as specified and directed. |
| 84 | S&F PVC (SWR) Bends any radius 110mm bore with access door complete all as specified and directed. |
| 85 | S&F PVC (SWR) Bends any radius 75mm bore with access door complete all as specified and directed. |
| 86 | M&L PVC (SWR) Teeof 110mm dia etc complete all as specified and directed . |
| 87 | S&F PVC (SWR) bends ,any radius of 75mm without access door complete all as specified and directed. |
| 88 | S&F PVC (SWR) bends ,any radius of 75mm with access door complete all as specified and directed. |
| 89 | S&F PVC (SWR) branch pipes single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches of 110mm dia with access door complete all as specified and directed. |
| 90 | S&F PVC (SWR) branch pipes single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches of 75mm dia with access door complete all as specified and directed. |
| 91 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and direceted . |
| 92 | S&F PVC (SWR) floor trap of dia of outlet 75mm,plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 93 | S&F PVC (SWR )'P' trap for 110 mm dia etc complete all as specified and directed. |
| 94 | M&L for Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil etc complete all as specified and directed. |
| 95 | M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 96 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade conforming to IS-15658 (2006) with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. Note :-Rate quoted by contractor include for all cutting and waste and work in all positions as well as in narrow widths. |
| 97 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed. Note :- The rates of cement concrete in flooring include for:(i) Use and waste of form work/screed strips and to divide the area in panels. (ii) Finishing surfaces of concrete topping even and fair (without using extra cement), and finishing surfaces of concrete in sub-floors, sub-bases, etc.even and rough to receive the topping layer.(iii) Finishing exposed edges fair or rounding or chamfering of exposed edges, where directed.(iv) Laying concrete in narrow widths, risers, treads, landings and the like. |
| 98 | M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 99 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. Note :-Rate quoted by contractor include all cutting and waste and work in all positions as well as in narrow widths. |
| 100 | M&L for preparation of new or previously untreated concrete surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of Plastic emulsion paint over priming paints plaster coat complete all as specified and directed. |
| 101 | M&L for providing and applying plaster of paris putty of 1mm thickness over plastered surface prepare the surface even and smooth complete all as specified and directed. |
| 102 | M&L for finishing wall withPremium acrylic smooth exterior paint with silicone additives of required shade . New York (Two or more coats applied @1.43 lit/10sqm over and including priming coat of exterior primer applied @2.20kg/10 Sqm complete all as specified and directed. |
| 103 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) applied to cutting through full thickness of floors and pavings complete all as specified and directed |
| 104 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed. |
| 105 | M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), withplain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:4 complete all as specified and directed. Note :- (a) The rates include for the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of theinternal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints. (b) Precast cement concrete item shall be reinforced, where indicated. Reinforcement shall be measured separately. |
| 106 | Supply only water proofing compound (liquid), ISI marked complete all as specified and directed. |
| 107 | Disconnecting existing tanks capacity exc 250 Litre but n exc 500 Litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 108 | Disconnecting existing tanks capacity exc 500 Litre but n exc 1000 Litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 109 | M&L Water proofing treatment on \\"Non approachable / non accessible and approachable roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete.(i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm(ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.(iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.(iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed. |
| 110 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 111 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed. |
| 112 | M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately). |
| 113 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 114 | Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 115 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 116 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 117 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 118 | (a) One light point controlled by one, one way switch 5 Amps |
| 119 | (b) One light point controlled by two, two way switch 5 Amps |
| 120 | (c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 121 | (d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 122 | (e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 123 | Description all as per item No 117.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 124 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 125 | S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site. |
| 126 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 127 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 128 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 129 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 130 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 131 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 132 | S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 133 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 134 | S & F for TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection on wall/ floor with necessary cement work and electrical connections complete all as specified. |
| 135 | S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 136 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 137 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 138 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 139 | S & F MCCB TPN 415 volts, Icu=100% Ics with rupturing capacity 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified. |
| 140 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 141 | S & F for MCB Single pole rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 142 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 143 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed. |
| 144 | S & F for energy efficient exhaust fan of 230/300 mm sweep made of pvc body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. |
| 145 | S & F for energy efficient exhaust fan of 450 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). |
| 146 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted by the contractor |
| 147 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 148 | S & F for LED luminaire 600 mm x 600 mm square LED panel 28 watts, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge. |
| 149 | Supply and laying and testing Cable XPLE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of 4 sqmm 2 core all as specified and as directed. |
| 150 | Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed. |
| 151 | M&L fine sand cushioning for cable protection in layers incl punning all as specified and directed. Note : Punned down thickness shall only be measured. |
| 152 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. |
| 153 | S & F tubes, 'light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. |
| 154 | Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed. |
| 155 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. |
| 156 | Supply and fixing manually operated change over switch 63amp, 3 phase 440 volt 50 HZ all as specified and directed. |
| 157 | S & F LED track aluminium housing with adjustable mounting track light installation complete all as specified and directed . |
| 158 | Servicing of 75 TR screw chiller with descaling, brushing, pcb cleaning complete all as specified and directed. |
| 159 | Supply, installation and testing of diffuser of appropriate size as per existing all as specified and directed. |
| 160 | dismantling of all diffuser, opening and cleaning of duct with suitable cleaner all as specified and directed. |
| 161 | Repair of insulation with nitrile/glasswool insulationand tape on joints all as specified and as directed . |
| 162 | M & L for supporting of duct through gripple all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender