Tender For Replacement Of Fire Fighting Pipeline At East Yard With Stainless Steel Ss316 Grade.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Aug 2026
11 days left
EMD
10 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Fire Fighting Pipeline At East Yard With Stainless Steel Ss316 Grade.
BOQ
| Sl. No. | Item Description |
| 1 | DISMANTLE EXISTING PIPELINE - The scope of work for contractor shall be Remove/Dismantle existing Pipeline including hydrant Valves/ Isolation Valves, Other fittings etc. Contractor shall dismantle existing Firefighting pipeline as per technical specs/ Tender drawings, Work Instruction, under the supervision of concern engineer. After dismantling contractor shall hand over these pipes and valves to MTC-EY or shift it to the designated place in MDL. Dismantling steel work (Pipes Supports) and stacking within the premises as directed. Carriage of material by mechanical transport including loading, unloading and stacking. for any height which may require lifting arrangements like crane, hydra etc. scaffolding is included in contractor scope without any cost.Note: Piping quantity is tentative it may vary at the time of execution. Remove existing Pipeline - For Pipe 20 NB |
| 2 | Remove existing Pipeline - For Pipe 20/25 NB |
| 3 | Remove existing Pipeline - For Pipe 80 NB |
| 4 | Remove existing Pipeline - For Pipe 100 NB |
| 5 | Remove existing Pipeline - For Pipe 150 NB |
| 6 | Remove existing Pipeline - For Pipe 200 NB |
| 7 | Providing & fixing in position anchor fasteners in concrete of HILTI / FISCHER make & quality, & fixing them in position at correct location, lines & levels as per specification and as directed & instructed by Engineer-in-charge/ Client – 12mm dia. |
| 8 | STAINLESS STEEL SUPPORT-Supply, Fabrication of Stainless-Steel Support to be Including. - ISA, ISMC - ISMB - Others as required by Site condition. Scope is including Supply & fitting Stainless Steel 316 U clamps with 02 nuts As per Pipe size. |
| 9 | Supply Fabrication Installation Testing and Commissioning of SS 316L pipe, SCH 40, Seamless, material Confirming to ASTM SA 312 TP 316L, dimensions as per ANSI B 36.19, length 5 to 7 meter each. The rates for various items under this head shall include pipe fittings (pipe fittings, BW end, SCH 40, Seamless, Confirming to ASTM SA 403 WP 316L, Dimensions as per ANSI B 16.9) except flanges, as per drawing / standard practice as per Tender Technical specs. The rate shall include cost of joining, welding, scaffolding & all temporary supporting for access work/ inspection/safety/ tools/tackels/ equipment/ machinery & any other required accesories for completion the works etc. for any height which may require lifting arrangements like crane, hydra etc. Note: Piping quantity is tentative it may vary at the time of execution |
| 10 | PIPE of SS 316L Seamless Sch 40. 20/25NB |
| 11 | PIPE of SS 316L Seamless Sch 40. 80NB |
| 12 | PIPE of SS 316L Seamless Sch 40.100NB |
| 13 | PIPE of SS 316L Seamless Sch 40.150NB |
| 14 | Supplying, Fabrication, Erection, Painting, Testing and Commissioning of FLANGES 150#, Confirming to ASTM SA 182 F 316-L, Dimensions as per ANSI B 16.5 including suitable SS Nuts & Bolts and suitable Gaskets |
| 15 | SFITC of SORF 80NB Class 150#. |
| 16 | SFITC of SORF 100NB Class 150#. |
| 17 | SFITC of SORF 150NB Class 150#. |
| 18 | BUTTERFLY VALVE-SITC of Wafer type SS 316L body & disc Butterfly Valves (suitable for Sea Water) ASA 150#/PN-16/Lever operated.[Valve Make: Sakhi / Advance / Hawa / Leader / L&T /Audco/Flowcen |
| 19 | SITC of Wafer type SS Butterfly Valves for size 80 NB, Lever Operated |
| 20 | SITC of Wafer type SS Butterfly Valves for size 100 NB, Lever Operated |
| 21 | SITC of Wafer type SS Butterfly Valves for size 150 NB, Gear Operated |
| 22 | GATE VALVE-SITC of SS 316L body Gate Valves (suitable for Sea Water) [Valve Make: Sakhi / Advance / Hawa / Leader / L&T /Audco/flowcen ] |
| 23 | SITC of SS Gate Valves for size 80 NB |
| 24 | SITC of SS Gate Valves for size 100 NB |
| 25 | SITC of SS Gate Valves for size 150 NB |
| 26 | HYDRANT VALVE-Supplying and installing gun metal 80/63 NB dia. Single Outlet GM Hydrant Valve fitted with all accessories complete. (Make : NEWAGE / SAFE GUARD / SAFEX / WINCO / AAAG (ShahBhogilal) |
| 27 | HYDRANT VALVE-Supplying and installing gun metal 100/63 NB dia. Double Outlet GM Hydrant Valve, PVC Cap and GM/SS Chain and fitted with all accessories complete. (Make : NEWAGE / SAFE GUARD / SAFEX / WINCO / AAAG (Shah Bhogilal) |
| 28 | Supply, installation & commissioning of 1.6 mm thick MS sheet metal hose pipe box of size 750x650x250 mm. The box shall have front glass door lock with hammer and key. The MS box shall be painted with two coats of signal red enamel paint from outside and white enamel paint from inside and suitable to house 2 nos 15Mtr. long length and 63mm dia of RRL hose with male female couplings, 1 nos. of short branch pipe. (Make : NEWAGE / SAFE GUARD / SAFEX / WINCO / AAAG (Shah Bhogilal)). |
| 29 | Supplying and fixing first-aid Hose Reel 30 mtr length with MS construction spray painted in post office red, confirming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall with all accessories complete.(Make : NEWAGE / SAFE GUARD / SAFEX / WINCO / AAAG (ShahBhogilal)) |
| 30 | Supplying Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with copper/ss wire with all accessories complete. (Make : NEWAGE / SAFE GUARD / SAFEX/ WINCO) |
| 31 | Supplying gun metal 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling asas required. (Make : NEWAGE / SAFE GUARD / SAFEX / WINCO) |
| 32 | Supply, installation and testing of 150 NB Cast Iron / Cast Steel, Ball / Flap type flanged end Foot Valves, inline with relevant IS (Make : Normex / Leader / L&T / Hawa/Flowcen). (To replace with the existing type either flap / ball type). |
| 33 | Supplying, Erection, Testing and Commissioning of MS 100 mm flanged x 100 mm FRT GM Adaptor with GM FRT 100 mm Blank Cap. Make : Aaag (Shah Bhogilal) / Newage / Safex. |
| 34 | Providing, fixing and painting of Structural Steel for trench cover and supports etc. in position (MS angles, rolled steel beams, joists and stanchions, square/ rectangle sections, MS plates, Lugs etc.) for any height which may require lifting arrangements like crane, hydra etc. |
| 35 | TAPE-Supplying and applying of anti-corrosion tape 4mm thick pypkote (iwl make) along with primer coaltar coat for 150 NB pipe for underground pipelines.. |
| 36 | TAPE-Supplying and applying of anti-corrosion tape 4mm thick pypkote (iwl make) along with primer coaltar coat for 100 NB pipe for underground pipelines |
| 37 | TAPE-Supplying and applying of anti-corrosion tape 4mm thick pypkote (iwl make) along with primer coaltar coat for 80 NB pipe for underground pipelines |
| 38 | Supply installation Testing and Commissioning of Screwed type Gun metal / SS316L 25/20 NB Air Release valve, SS coupling and complete as per tender scope of work and instruction of EIC [Valve Make: Leader / L&T / Zoloto / Hawa / Sant / Sakhi/Flowcen] |
| 39 | Supply installation Testing and Commissioning of Socket weld / screewed end Gun metal / SS316L Ball Valves , for size 25/20 NB.[Valve Make: Leader / L&T / Zoloto / Hawa / Sant / Sakhi/Flowcen |
| 40 | Supply installation testing and commissioning of Pressure Gauge of Range 0-20 kg/cm² Glysrene filled white screen 100NB Dail alongwith necessary fittings complete. [Pressure Gauge Make: H-Guru or General Instruments] |
| 41 | Providing PCC for underground pipe supports / trench for pipeline with cement morter 1:2:4 including shuttering and centring with curing and finishing etc. for pipe line etc, all complete as per specifications, drawings and as directed by Engineer-in-charge |
| 42 | Providing at the site of work and lowering, laying and jointing RCC NP2 class pipes conforming to IS:458-1988 in prepared trenches / underground road crossing in grade and level, bedding cement mortar in 1:4, including hoisting , making rubber ring/coller joints in cement mortar 1:1, including cost of collar/rubber rinf, jointing material like cement, sand etc and hydtraulic testing of thepipes at factory as well as on site as per the stipulation in relevant IS code etc. complete.--450 mm dia. |
| 43 | Providing at the site of work and lowering, laying and jointing RCC NP2 class pipes conforming to IS:458-1988 in prepared trenches / underground road crossing in grade and level, bedding cement mortar in 1:4, including hoisting, making rubber ring/coller joints in cement mortar 1:1, including cost of collar/rubber rinf, jointing material like cement, sand etc and hydtraulic testing of thepipes at factory aswell as on site as per the stipulation in relevant IS code etc. complete.--300 mm dia |
| 44 | Earth work in Excavation by Mechanical means/ manual means in all types of soils, such as Earth, Marine Clay, Marshy Land, Running Sand, Garbage, Slush, Murum, any type of road layer etc. except hard rock or concrete as directed by Engineer in-charge. Depth up to 1.5 m |
| 45 | Excavation/Dismantling/ Demolishing Cement concrete, hard rock, road layers etc. manually/ by mechanical means including stacking material at designated place within MDL premises before disposal as directed by Engineer-in-charge. Disposal shall be paid separately |
| 46 | Making core drills (cutting) with cylindrical cutting tools in concrete viz wall, slab, beam, column, pardi etc as directed by Engineer-in-charge/ Owner. --200 mm dia - depth upto 450 mm maximum. |
| 47 | Making core drills (cutting) with cylindrical cutting tools in concrete viz wall, slab, beam, column, pardi etc. as directed by Engineer-in-charge/ Owner. --300 mm dia - depth upto 450 mm maximum. |
| 48 | Providing and fixing in position reinforcement of all dia for Trench footings, foundations, slabs, columns, beams, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per EIC including cutting, bending, hooking the bars, binding with wires or welding and supporting as required at all locations and height all labour and materials etc. complete.i) HYSD (Fe 500) and more -HYSD bars |
| 49 | Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work (excluding reinforcement), using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying. including shuttering and centering(Note: - Minimum Cement content considered in this item is @ 350 kg/cum). - This item will be operated only whenever contractor execute RCC works with Ready Mixed concrete.--for raft Slab/ Pedestals/Road / trench |
| 50 | Dismantling steel work in single sections including dismembering, stacking of dismantled materials at designated place and disposal of similar unserviceable, dismantled or waste materials by manual, mechanical means, including loading, transporting, unloading to MDL Scrap Bin or as approved by Engineer-incharge, for all leads including all lifts involved. etc. complete. |
| 51 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender