Tender For Comprehensive Repair And Maintenance And Periodical Services To Jcos/Or Md Accn At Vasant Range Colony And Yogender Vihar Under Ge (South) Delhi Cantt-10
Tender Value
79.99 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
25 days left
EMD
1.44 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair And Maintenance And Periodical Services To Jcos/Or Md Accn At Vasant Range Colony And Yogender Vihar Under Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey and directedcomplete all as specified. |
| 2 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 3 | M&L for RCC 1 : 2 : 4 type B0 using 12.5 mm graded stone agg as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 4 | M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 5 | M&L TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 6 | M & L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite incl Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed. |
| 7 | M & L for Glazed Ceramic coloured tiles in vertical surface 600X300X7 mm thick set and jointed in type -II adhesive and pointed in approved cement tile grout with 4mm spacer incl dismantling existing tiles of any descrription and in any postion complete all as specified and as directed. |
| 8 | M&L for Vitrified Ceramic tiles double charged (light shade), 8-9 mm thick (square/rectangular) polished, area of each tiles not 0.36 sqm (600mm X 600mm), in floors and skirting etc. set and jointed in type -II adhesive and pointed in approved cement tile grout with 4mm spacer incl dismantling existing tiles of any descrription and in any postion complete all as specified and as directed. |
| 9 | M&L for non skid ceramic tiles 7-8 mm thick (square/rectangular) polished, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm of size (300mm X 300mm), in floors and skirting etc. set and jointed in type -II adhesive and pointed in approved cement tile grout with 4mm spacer incl dismantling existing tiles of any descrription and in any postion complete all as specified and as directed. |
| 10 | S&F in repair vitreous china squatting pan, (Orissa pattern) size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap etc complete including making good to floor, complete all as specified and directed. |
| 11 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts and flush pipe and removal of IWC/EWC and dismantling tile and fixing new tile(300x300x7 to 8 mm) with screed bed in CM(1:4) complete all as specified and directed by Engr-In -Charge. |
| 12 | S&F in repairs low level flushing cistern of 10 ltrs capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified. |
| 13 | M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces (Make of tapercreate M/S CICO Engg Services) then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm.(Make of fibre glass cloth M/S The Structure Water Proofing Co Pvt Ltd) and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours all as directed. |
| 14 | M&L Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified. |
| 15 | M&L for 10 mm thick cement plaster on brick/ concrete surface in CM 1:3, finished even and fair surface with out using extra cement but mixing water proofing compound at the rate of 2% of cement by weight (WPC shall be paid separately). |
| 16 | M&L 75 mm thick PCC type D2 (1:4:8) using 40 mm graded stone aggregate as in sub base of flooring. |
| 17 | M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors finished rough. |
| 18 | S&F in repairs 15mm two way angle valve, fancy type, chromium plated brass complete all as directed. |
| 19 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 20 | S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent |
| 21 | S&F in repair vitreous China wash hand basin (pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste PTMT pipe & waste coupling 32 mm dia including all necessary fitting and fixtures complete all as specified |
| 22 | S&F in repair PVC waste pipe 32/40 mm bore, 65 cm long for sink etc complete. |
| 23 | S&F in repairs looking mirror of any size as reqd bevelled edge selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 24 | S & F in repairs Chromium plated brass overhead shower rose 125mm with arm complete all as specified and directed. |
| 25 | S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 26 | S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed. |
| 27 | S&F in repair stainless steel sink with drainage board standered size made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union with bowl size410x330x160mm complete all as specified and directed. |
| 28 | Supplying and laying of CPVC 20mm OD pipes SDR 11 including Plain CPVC SDR 11 fittings and Brass FTA/MTA on walls/ceiling or laying in floors incl brass coupling fittings incl taking down existing GI/CPVC pipes complete all as specified complete with fitting as required. |
| 29 | Supplying and laying of CPVC 25 mm OD pipes SDR 11 incl Plain CPVC SDR 11 fittings and Brass FTA/MTA on walls/ceiling or laying in floors incl brass coupling fittings taking down existing GI/CPVC pipes complete all as specified complete with fitting as required. |
| 30 | M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, four layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball including taking out existing 500 Ltr unserviceable PVC tank of any description including fitting and fixtures complete all as specified. |
| 31 | Demolition and breaking up bath toilet and kitchen sewage vertical pipe and (CI,AC,PVC etc) 75/110 mm set in any cement mortar of any diameter incl bend. Note - CI pipe removed and provision of PVC pipe 75 mm and 100 mm pipe provided and will be paid on respective items. |
| 32 | S&F for PVC (SWR) bends any radius, 110 mm bore complete. Note: rate coated up to G+3 including scaffolding etc |
| 33 | S&F for PVC (SWR) bends any radius, 75 mm bore complete.Note: rate coated up to G+3 including scaffolding etc |
| 34 | S&F for 110 PVC (SWR) Tee with door plate complete all as specified and as directed.Note: rate coated up to G+3 including scaffolding etc |
| 35 | S&F for 75 mm PVC (SWR) Tee with door plate complete all as specified and as directed.Note: rate coated up to G+3 including scaffolding etc |
| 36 | S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to existing/new pipe waste pipe fixed in solvent cement concrete complete all as specified and as directed. |
| 37 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamp, of 110 mm dia complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete. |
| 39 | M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement complete. |
| 40 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' |
| 41 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete. |
| 42 | M&L for 5 mm thick rendering with ready mix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on ceiling of up to four stories bldgs. Make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast |
| 43 | M&L for 10 mm thick rendering with ready mix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs. Make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast |
| 44 | M&L for 15 mm thick rendering with ready mix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs. Make of ready mix plaster: Birla Aerocon/Ultratech radiplast/ACC acoplast |
| 45 | M&L preparation of new plaster surfaces of wall and ceiling applying 1 to 2 mm thick water proof wall care putty complete all as specified and as directed including Applying two coats on old surfaces wall/ceiling with Graco-490 spray machine, of Green Pro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent over a coat of primer as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work”. “Make - Asian Paint (Apex ultima protek)/ Berger paint (Weather coat long life – 10)/ Acro Paint (Acro Guard 3 X)/ Dulux Paint (Weather Shield) Elastomeric.Note - Primer should be compatible with the paint. |
| 46 | M&L for complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 ich/ 9 inches to make the surfaces free from dust, loose paint etc complete Complete all as specified and as directed. |
| 47 | M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickeness 1mm over the plastered/old painted wall/ceiling after scrapping to prepare the surface with machenical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 48 | M&L Applying two coats on new wall/ceiling surface with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work. |
| 49 | M&L for complete removal of existing treatment (OBD/oil paint/white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint.removal of nails etc & filling cracks/hole & windows/doors jams repair in good shape by skilled labour. M&L for two coats of oil bound distemper over waterproof putty @ 1 Kg (undiluted) per sqm of average thickeness 1mm over the plastered/old painted wall/ceiling after scrapping to prepare the surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step - 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step - 2) Applying the first coat the prepared mixer with the help of fully autometic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a miximum pressure 3300 PSI Step - 3) Allow 6-8 hrs time to dry the putty surface. |
| 50 | Demolition of brick work built in cement or cement lime mortar complete all as specified and directed. |
| 51 | M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified. |
| 52 | Taking down (Door) chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete. |
| 53 | Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete. |
| 54 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed. |
| 55 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 57 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 58 | S&F aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D\\" handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & 4 mm thick selected quality frosted and plain glass and guard bars fixed in 50x5 flat and 8mm sqaure bar @ 100mm c/c including necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 59 | S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified.Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. |
| 60 | M&L in repairs for 18 mm thick wood plastic composites (WPC) board for kitchen cabinets, partitions, cupboards and similar work 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for inner surfaces and one side decorative finished surface on exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform, in Cupboards or below counter top washbasins including all necessary fittings like handles and steel soft closing heavy type telescopic drawers channel etc wherever required and dismantling existing boarding complete all as specified and directed.Note : (a) Pattern & design of WPC board to be decided by GE. |
| 61 | S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. |
| 62 | S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws. |
| 63 | S&F SS tower bolt size 125mm complete. |
| 64 | S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed. |
| 65 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 66 | M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 67 | S&F, 25 mm dia SS curtain rods (minimum 1 mm thick sheet) fancy type, including SS bracket and SS side bulb decorative type complete for doors and windows complete all as specified. |
| 68 | Cutting of shrubs/bushes and small plants/vegetation including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified. |
| 69 | S&F in repairs 15 mm dia Brass wash basin CP mixer 2 in 1 WHB for mixing hot & cold water screwed down for iron pipe and fixed |
| 70 | S&F in repair hylam/bakelite laminated sheet top cover 1.5mm thick of size 8\\"x5\\" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 71 | S&F in repair hylam/bakelite laminated sheet top cover 1.5mm thick of size 11\\"x9\\" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 72 | S&F in repair hylam/bakelite laminated sheet top cover 1.5mm thick of size 7\\"x4\\" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 73 | S&F in repair hylam/bakelite laminated sheet top cover 3mm thick of size 5\\"x5\\" fitted with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 74 | S&F in repair MS sunken box 1.2mm thick of size 8\\"x5\\" to fixing of switch board concealed with necessary screws and washers complete as per site requirement complete all as specified and as directed. |
| 75 | S&F in repair MS sunken box 1.2mm thick of size 9\\"x11\\" to fixing of switch board concealed with necessary screws and washers complete as per site requirement complete all as specified and as directed. |
| 76 | S&F in repair MS sunken box 1.2mm thick of size 7\\"x4\\" to fixing of switch board concealed with necessary screws and washers complete as per site requirement complete all as specified and as directed. |
| 77 | S&Fin repair MS sunken box 1.2mm thick of size 5\\"x5\\" to fixing of switch board concealed with necessary screws and washers complete as per site requirement complete all as specified and as directed. |
| 78 | S&F in repair modular sheet cover of 3 module , with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 79 | S&F in repair modular sheet cover of 6 module with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 80 | S&F in repair modular sheet cover of 8 module with MS galvanised screws and cup washer including shifting of all fixture from the old switch board and connection complete all as specified and as directed. |
| 81 | M&L for comprehensive maint of ceiling, exhaust fan of Md accn including proper checking of base connection, lock pin of U clamp fan blade, serviceability of down rod, gun metal bush, shaft, stater, ring, ceiling fan outer body, exhaust fan blade, body and capacitor where ever required complete with greasing/lubrication and cleaning of fan bearing complete all as specified and as directed. Note :- 1. All material required/spare parts shall be measured and paid separately against 'supply only' under respective item of BoQ. 2. The rated quoted by the contractor deemed to be including taking down of ceilingfan/exhaust fan, transportation to workshop for rewinding or machining work, and refixing the same after repair. |
| 82 | M&L for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaningand winding with supper enameled copper wire of superior quality of same gauge, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan complete all as specified and as directed. |
| 83 | All as per Srl item No.13.00 here-in-before, but exhaust fan of 230/300 mm sweep. |
| 84 | Supply only 1200mm sweep BLDC fan controller PCB with short circuit protection power 240V suitable for BLDC ceiling fan of existing make at site complete all as specified and as directed. |
| 85 | Supply only upper and lower Gun metal bush for ceiling fans as per existing complete all as specified and as directed. |
| 86 | Supply only ball bearing for ceiling fan of suitable size & model as per existing complete all as specified and as directed. |
| 87 | Supply only fan shaft with pin for ceiling fans of 1200/1400 mm sweep as per existing complete all as specified and as directed. |
| 88 | Supply only 'U' clamp with rubber real for hanging ceiling fans of 1200/1400 mm sweep as per sample complete all as specified and as directed. |
| 89 | Supply only down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint complete all as specified and as directed. |
| 90 | Supply only Canopy for Ceiling fans of 1200 mm swipe heavy duty complete all as specified and as directed. |
| 91 | Supply only blade (set of 3 blades) of Ceiling fans 1200 mm sweep heavy duty as per existing complete all as specified and as directed. |
| 92 | Supply only blade (set of 3/4 blades) of exhaust/fresh air fans of 230/300 mm sweep heavy duty complete all as specified and as directed. |
| 93 | Supply only frame of exhaust/fresh air fans of 230/300 mm sweep heavy duty complete all as specified and as directed. |
| 94 | Supply only single phase motor AC 230V 1300 RPM copper wound suitable for exhaust fan of 230/300 mm sweep heavy duty including taking down of old louvers complete all as specified and as directed. |
| 95 | Supply only single phase motor AC 230V, 1350 RPM copper wounded suitable for fresh air fan 300mm sweep as per existing complete all as specified and as directed. |
| 96 | Supply only ceiling fan capacitor of 2.5 mfd complete all as specified and as directed. Make:- EPCOS , Tibcon , Havells |
| 97 | Supply only ceiling fan capacitor of 3.15 mfd complete all as specified and as directed. Make:- EPCOS , Tibcon , Havells |
| 98 | S& F in repair fan regulator electronic, stepped type/switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 99 | S& F in repair fan regulator electronic, stepped type/switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender