Tender For repair maintenance Street Lights Pumps And electrical installation Of Various Underpasses Rub Ways Subways And Underneath Of Flyovers (Shahdara) Under Pwd M-251, Delhi. (Sh:-Restoration Of Electrical System At Apsara Boarder, Mansarovar, P
Tender Value
36.43 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
3 days left
EMD
72861
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance Street Lights Pumps And electrical installation Of Various Underpasses Rub Ways Subways And Underneath Of Flyovers (Shahdara) Under Pwd M-251, Delhi. (Sh:-Restoration Of Electrical System At Apsara Boarder, Mansarovar, Pratapkhand, Shyamlal Collage Underpasses In Jurisdiction Of Sub Division -3/M2533, Shahdara, Delhi.)
BOQ
| Sl. No. | Item Description |
| 1 | S.I.T.C of following manually operated Oil immersed Star-Delta motor Starter with single contact heavy duty and cable entry box, oil tank capacity 6 Ltr. to 8 Ltr. with filled oil complete with SS enclosure and operation handle complete etc. as reqd. |
| 2 | 40 HP |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Pro1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 5 | Hot finished welded type tubes |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required |
| 7 | In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 8 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. |
| 9 | Providing, fabricating, supplying, fixing and commissioning of sliding type wire mesh gate made out of suitable size M.S. frame with welded M.S. wire mesh, including guide channel, rollers, sliding arrangement, locking arrangement, handles, stopper, necessary nut-bolts, welding, cutting, grinding, primer coat and two coats of synthetic enamel paint complete as required at site. |
| 10 | Fabrication, Supplying and installation of outdoor type cubical feeder pillar of size 1875mm x 1100mm x 300mm of M.S. sheet 2mm thick (14 SWG) duly compartmentalised having 5 strip busbars of 250amp capacity double door with two nos. godown locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 40 mm X 40 mm X 6 mm (NS) 900 mm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement 2 sand :4 stone aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminum thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as reqd. Supplying & Fixing of following accessories in the existing cubical panel board/feeder pillar including connection testing etc. as reqd. Size of panel is not less than 2.06 Sqmtr. |
| 11 | Incoming:- a) 250Amp. 25 KA MCCB, FP with neutral link- 1 No.b) Spreder Link for MCCB -1setMetering:-a) R. Y. B indication Lamp - 1Setb) 6A SP MCB 10KA For Controlling - 1 No.c) CT 200/5A Class-1d) Digital voltmeter with selector switch - 1 No.e) Digital Ampmeter with selector switch - 1 No.f) Rotary handle extandedOutgoing:-a) 125Amp. 18 KA MCCB FP with neutral link -4 Nos.b) Spreder Link for MCCB -4 setc) Power Contactor 4 Pole with 125 Amp. - 1 No.d) Astronomical digital timer. - 1 No.e) Extanded Rotary handle -04 Nos.f) Indicating LED light/Lamp - 1 Set |
| 12 | SITC of Onload 4 pole manual changeover switch rating 400 Amp , operated on 415 Volts ,50 Hz with sheet enclosure weather proof side handling operated & fixing by Angle iron, nut & bolts etc. complete etc. as reqd. |
| 13 | Supplying and fixing corrugated/translucent Fiber Reinforced sheet, thickness 2mm over existing wire mesh fencing/barrier, including cutting to required size, drilling holes, overlapping, fixing with self-drilling/self-tapping screws, washers, Aluminium cleats, supporting members wherever required, complete with all fittings, fixtures, labour, tools & tackles, scaffolding, transportation and incidental charges, complete as required. colour of sheet and design is decide by Engineer-in-Charge |
| 14 | Supplying and Laying of one number PVC insulated Aluminium conductor and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/Open Duct etc. as required. |
| 15 | 3 x 10 sq.mm |
| 16 | 3.5 x 50 sq.mm |
| 17 | 3.5 x 95 sq.mm |
| 18 | 3.5 x 120 sq.mm |
| 19 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 20 | 3½ X 50 sq. mm (35mm) |
| 21 | 3½ X 95 sq. mm (45mm) |
| 22 | 3½ X 120 sq. mm (45mm) |
| 23 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 24 | 250 A,36KA, FPMCCB |
| 25 | 125 A,36KA, FPMCCB |
| 26 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 27 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 28 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 29 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 30 | Supplying, installation, testing and commissioning of Self Priming Factory Coupled sewage pump set nonclog free flow type capable of handling solid not less than 30 mm size suitable to give discharge of range 2160 LPM to 600 LPM at a head range of 9-25 mtr., maintenance free antifriction bearing with permanent grease filled for life with special metal carbide seals, Stainless steel impeller CF8 or CF8m, The pump set shall be with rated output of 10 HP suitable for operation on 415+/- 5% volts, TEFC, 50 HZ 1450 RPM, IE3 Three phase with IP 68 protection complete with lifting chain. The motor should have “F” Class Insulation. |
| 31 | SITC of fully automatic control panel suitable for 20 HP sewage SP Coupled Pump set having suitable contactors for star delta-starter, ammeter, voltmeter, overload relay, dry run protection, thermal protection, moisture protection, indicating lamps, ON/OFF Push button, SPP, all duly wired in MS Fabricated Indoor type box complete etc. as required. |
| 32 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: |
| 33 | 100 mm dia |
| 34 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: |
| 35 | 100mm dia |
| 36 | 150 mm dia |
| 37 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required: |
| 38 | 100mm dia |
| 39 | 150mm dia |
| 40 | SITC of 1 HP self-priming Dewatering sewage submersible pump with 11 mtr. head 100 LPM discharge complete with TEFC motor, starter, suction & delivery piping, cabling and all accessories required for priming of main pump system, including testing and commissioning complete. |
| 41 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 42 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 43 | Providing and fixing of 4.5Kg Carbon Dioxide type (Co2) fire extinguisher confirming to IS 15683 duly enamel painted fully charged, wheel release type valve, delivery hose horn locking arrangement, operating temperature: 30 Deg C to +55 Deg C i/c wall mounting MS. bracket etc. complete as required. |
| 44 | Supplying and fixing of anti-vibration pads mounts below motor pump base frame/foundation, made of high-grade neoprene rubber/cork-rubber composite vibration isolator, suitable load carrying capacity, including positioning, alignment, fastening with anchor bolts, levelling and all accessories required for proper vibration isolation of motor pump set, complete as per specifications and direction of Engineer-in-Charge. |
| 45 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 46 | Credit for old dismantle materials. |
| 47 | Assorted Starter |
| 48 | Assorted MCCB |
| 49 | Assorted Sluice valve 100 mm |
| 50 | Assorted NRV 100 mm |
| 51 | Assorted MS Pipe 100 mm dia |
| 52 | Assorted Panel |
| 53 | Assorted Sluice Valve 150 mm |
| 54 | Assorted NRV - 150 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender