Tender For maintenance of electrical installation & Fans Installed At Mso Building, Ip Estate, New Delhi. (Sh:- Supply Installation Testing and Commissioning of E&M Works With Led Screen)
Tender Value
98.84 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
0 days left
EMD
1.97 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance of electrical installation & Fans Installed At Mso Building, Ip Estate, New Delhi. (Sh:- Supply Installation Testing and Commissioning of E&M Works With Led Screen)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, laying and fixing of following sizes XLPE insulated PVC sheathed following conductor armoured cable of 1.1 KV grade on Wall/surface etc complete as required.a) 4 X 16 Sq.mm Coper Conductor |
| 2 | b) 3.5X 35 Sq.mm aluminum conductor |
| 3 | c) 3.5 X 50 Sq.mm aluminum conductor |
| 4 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 5 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required.` |
| 6 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required |
| 7 | Supplying and fixing of cubical type outdoor feeder board suitable for 3 Phase, 4 wire, 415 volt, 50 Hz, dust and vermin proof made out of 2 mm thick CRCA sheet duly powder coated with siemens gray paint after prepaint treatment fully compartmentalized and with suitable capacity aluminium bus bar of with colour coated PVC sleeve, cable alley i/c. Manual ON-OFF Bypass push button assembly brought out at rain protected door slot so as to operate pumps manually without opening of doors of the panel , earthing studs & detachable gland plates i/c providing and fixing following switchgears and accessories therein complete with connection, interconnection earthing stud and neutral bus bar suitable base frame, concrete foundation i/c. testing and commissioning etc. complete as required. (Depth of panel minimum 300mm) (I) MAIN INCOMER 1 SET.125A, FP 36KA MCCB THERMAL MAGNETIC BASEDRELEASE WITH EXTENDED ROTARY HANDLE 1 NOS. (II) METERING(a)- DIGITAL MULTIFUNCTION METER 1 NOS. (b)-R, Y, B PHASE INDICATION LAMP 3 NOS. (c)- CT150/5 15 VA 1.0 CL 3 NOS. (d)- 06A SP MCB 3 NOS. (III) BUSBARS(a)-150A FP BUSBAR ALUMINUM 1 SET. (IV) OUTGOING (4SET)(a)-63A, FP 25KA MCCB THERMAL MAGNETIC BASED RELEASE WITH EXTENDED ROTARY HANDLE 1 NOS. (b)ON INDICATION LAMP 1 NOS.(b)-10-32 Amper SP MCB- 24 NOS. (c)- 32A DP MCB 10KA 12 NOS. |
| 8 | Supply, Installation, Testing & Commissioning (SITC) of Outdoor Active LED Video Wall of 230 inches minimum size 5.0 m (W) × 3.0 m (H) (±2%), complete with LED display cabinets, mounting frame/structure, power supplies, signal and power cabling, connectors and all necessary accessories. The LED display shall be of maximum 6.94 mm pixel pitch, minimum resolution 720 × 432, SMD 3-in-1 technology, minimum 20,700 pixels/m², minimum 5,000 nits calibrated brightness, minimum 12,000:1 contrast ratio, minimum 160°/120° viewing angle (H/V), 14-bit or higher processing, 3840 Hz or higher refresh rate, maximum 800 W/m² power consumption, IP65 protection (front & rear), magnesium/aluminium cabinet construction, and suitable for outdoor operation under specified environmental conditions.The item shall also include OEM Digital Signage Software of the same brand as the LED controller and LED cabinets, featuring secure content management with application encryption, sandboxing, HTTPS (TLS 1.2 or above), MD5/AES decryption, port control, file integrity verification, multi-user access, content design, scheduling over LAN/WAN, multi-zone screen layout with independent display of images, videos, URLs, HDMI inputs and other multimedia content, complete with all software licenses, configuration, testing, commissioning and warranty, as per the detailed technical specifications and approved drawings, complete in all respects.The item shall include an OEM LED Controller of the same make as the LED display with original OEM configuration software, supporting HDMI (HDCP 2.2), DisplayPort and OPS input, 4K (3840 × 2160 @ 60 Hz) input resolution, minimum 8.2 million output pixels, minimum 16 LAN outputs, RS-232C loop, LAN control, temperature monitoring, chroma adjustment, brightness adjustment, scaling, HDR10/HDR10 Pro, remote control, signal and power redundancy, and inbuilt operating system, complete with all required licenses and accessories(Make:- Samsung/LG/NEC/Daktronics) |
| 9 | SITC of Media Player (same make as LED VW Display) with support for PBP/PIP, up to 4 simultaneous input sources, inbuilt OS, minimum 8 GB internal memory, built-in Wi-Fi, local key operation, automatic input failover, minimum HDMI × 2, DP × 1, USB × 2 inputs, HDMI & DP outputs, RS-232C, RJ45 and IR control ports, complete with remote controller, accessories, cabling, installation, testing and commissioning(Make:- Samsung/LG/NEC/Daktronics) |
| 10 | Providing, supplying, fabricating, erecting, testing and commissioning of 6.0 m high MS Bi-Pole structure comprising two heavy-duty 300 mm dia MS tubular poles with cross beam, MS mounting frame suitable for supporting the LED display, base plates, anchor/foundation bolts, cable entry arrangement, maintenance platform (where required), and all necessary brackets, stiffeners and accessories. The work shall include design, construction and casting of RCC foundations/pedestals of suitable size and grade (minimum M25), including excavation, PCC levelling course, reinforcement steel, formwork/shuttering, concreting, curing, backfilling, disposal of surplus earth, grouting, alignment, and fixing of anchor bolts as per structural design. The pole and supporting members shall be treated with one coat of anti-corrosive zinc-rich primer and two coats of synthetic enamel paint (or hot-dip galvanizing where specified), complete with all welding, nuts, bolts, clamps, earthing provision, cable routing arrangements, and all civil and structural works required for a complete, safe, rigid and durable installation, as per approved structural drawings and technical specifications. |
| 11 | Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperature shall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db / km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cut off wavelength < 1260 nm i/c splicing & marking etc complete as required.9.01) Single Mode 6 Core Optical fiber cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender