Tender For Construction Of 25 No. 125 Mm Machine Drilled Hand Pump Wells At Various Spots Within Bandipora Assembly Consituency (Additional 05 No. Of Wells).
Tender Value
13.78 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
8 days left
EMD
41400
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 25 No. 125 Mm Machine Drilled Hand Pump Wells At Various Spots Within Bandipora Assembly Consituency (Additional 05 No. Of Wells).
BOQ
| Sl. No. | Item Description |
| 1 | Drilling/Boring of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I &II) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost of shifting of drilling machine, loading, unloading of accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items.Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. |
| 2 | Supply, Providing, Fitting, assembling in vertical position in above drilled bore of Mild Steel plain and beveled ended 125mm dia. (Class B) as per IS 4270 Casing pipes and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The whole casing pipe is inclusive of slotted pipe/ flushed, which is to be used as per the site requirement and as directed by site engineer. The pipe shall be lowered up to the desired level BGL. The average length of each pipe shall not exceed 3.00 Mts. The welding electrodes used for welding the pipe shall confirm to relevant IS codes.The specifications of the tube well shall be as per IS 2800 part I&II. |
| 3 | Supply, Installation, Testing and commissioning of India Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle axle, washers, nuts/bolts.(Qty may vary depends on the total no of wells to be drilled and quantity Required). |
| 4 | Providing and Fitting of 32 mm dia. GI risers out of class B pipes of approved SI make including properly threaded after 10 feet length each No. with heavy duty sockets for joint fitting in the tube well.(Qty may vary depends on the total no of wells to be drilled and quantity Required). |
| 5 | Providing and Fitting of 10 Feet long GI connecting rods suitable for INDIA Mark II Hand Pump.(Qty may vary depends on the total no of wells to be drilled and quantity Required). |
| 6 | Providing and laying of cement block of 4x4 feet size and 0.3 m (1ft) deep in a mix of 1:3:6 to adequate the strength to act as sanitary block for the well and grout the hand pump assembly in order to make it robust to resist shock load observer while pumping. Cost on account of shuttering, strutting, centring, curing etc. is included in the scope of work.In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly.(Qty. of blocks may vary depends on the total no of wells to be drilled) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender