Tender For Repair/ Polishing Of Wooden Furniture Articles And Connected Worksat Raiwala Mil Stn
Tender Value
8 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
12 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Polishing Of Wooden Furniture Articles And Connected Worksat Raiwala Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | HAT STAND WITH MIRROR (FD-23M/206/233)Repair/Replacement of following U/S parts of \\"Hat Stand with Mirror\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 760x380x5mm thick as approved by GE. |
| 2 | S&F suitable new frame of first class hard wood (Teak) including 6mm thick plywood for back side of mirror duly fixed with frame as per drg and as directed. |
| 3 | S&F suitable new top/shelf of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading. |
| 4 | S&F of new legs of 1st class hard wood (Teak) as per drg. |
| 5 | S&F of new pegs/hooks of suitable pattern as approved by GE. |
| 6 | S&F of new Buffers. |
| 7 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing shape and size in drg as directed. |
| 8 | TABLE DRESSING GENTS WITH MIRROR (FD-250/31M/230)Repair/Replacement of following U/S parts of \\"Table Dressing Gents\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 760x380x5mm thick as approved by GE.Make: Modi Guard/Atul. |
| 9 | S&F suitable new frame of first class hard wood (Teak) including 6mm thick plywood for back side of mirror duly fixed with frame as per drg and as directed. |
| 10 | S&F suitable new top of prelaminated MDF board of 18/19mm thick one side teak finish with 4mm thick half round teak wood beading. |
| 11 | S&F different new parts of drawers: Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12mm thick ply wood with 4mm thick teak wood half round beading as per drg. |
| 12 | S&F of new heavy duty mild steel telescopic channel for smooth functioning of drawer as approved by GE. |
| 13 | S&F suitable new 50mm long \\"D\\" shaped stainless steel handle as approved by GE. |
| 14 | S&F suitable size new leg of 1st class hard wood (Teak) as per drg. |
| 15 | S&F of new Buffers. |
| 16 | Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site. |
| 17 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side as per existing. |
| 18 | TABLE DRESSING LADIES WITH STOOL (FD-251/378/MAP-II/07)Repair/Replacement of following U/S parts of \\"Table Dressing Ladies with Stool\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F suitable new electro copper plated mirror of polished sheet glass of first class quality ISI marked size 1220x380x5mm thick as approved by GE. |
| 19 | S&F suitable new frame of first class hard wood (Teak) including 6mm thick plywood for back side of mirror duly fixed with frame as per drg and as directed. |
| 20 | S&F different new parts of drawers: Top/Side/Bottom of existing shape and size made of 18mm prelaminated MDF board & 12mm thick ply wood with 4mm thick teak wood half round beading as per drg. |
| 21 | S&F suitable new top of table dressing ladies (box) of prelaminated MDF board of 18/19mm thick with 4mm thick half round teak wood beading. |
| 22 | S&F suitable new side planks of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading. |
| 23 | S&F suitable new door plank of table dressing (box) of prelaminated MDF board of 18mm thick with 4mm thick half round teak wood beading. |
| 24 | S&F suitable new bottom (box) of 12mm thick plywood as shown on drg. |
| 25 | S&F suitable new stainless steel piano hinges and one No magnetic catcher as shown on drg. |
| 26 | S&F of new heavy duty mild steel telescopic channel for smooth functioning of drawer as approved by GE. |
| 27 | S&F suitable new 50mm long \\"D\\" shaped stainless steel handle as approved by GE. |
| 28 | S&F suitable new 75mm long \\"D\\" shaped stainless steel handle as approved by GE. |
| 29 | S&F suitable new plain sliding glass as per drg and as directed. |
| 30 | S&F suitable size new leg of 1st class hard wood (Teak) as per drg. |
| 31 | S&F suitable new acrylic knob as approved by GE. |
| 32 | S&F new cushion foam of 75mm thick and 40 density for seat of stool dressing (box) as shown on drg. |
| 33 | S&F new leatherite cloth for seat of stool dressing (box) as shown on drg as approved by GE. |
| 34 | S&F suitable new heavy duty revolving nylon double wheels for stool dressing (box) as shown on drg. |
| 35 | S&F of new Buffers. |
| 36 | Tightening of complete table dressing by suitable size nails and screw as directed by Engr-in-Charge on site. |
| 37 | M&L for two or more coats walnut/lacquer polish for all beading and view portion of table dressing match with grains and finish as directed. |
| 38 | TABLE DINING 4 PERSONS (FD-273/30M/239)Repair/Replacement of following U/S parts of \\"Table Dining 4 Persons\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F new top of prelaminated particle board 18/19mm thick of teak shade of size 1200x750mm covered with 4mm thick teak wood beading all round complete. |
| 39 | S&F of new legs with 1st class hard wood (Shisham/Teak) made to shape as per drg of size 740x60x60mm. |
| 40 | S&F of new top long rail of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 41 | S&F of new top short rail of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 42 | S&F of new Buffers. |
| 43 | Tightening of complete table by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site. |
| 44 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 45 | TABLE DINING 6 PERSONS (FD-273/376/30M/239)Repair/Replacement of following U/S parts of \\"Table Dining 6 Persons\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F new top of prelaminated particle board 19mm thick of teak shade of size 1500x900mm covered with 4mm thick teak wood beading all round complete. |
| 46 | S&F of new legs with 1st class hard wood (Shisham/Teak) made to shape as per drg of size 740x60x60mm. |
| 47 | S&F of new top long rail of 1st class hard wood (Shisham/Teak) made to shape as per drg of size 1100x25x100mm. |
| 48 | S&F of new top short rail of 1st class hard wood (Shisham/Teak) made to shape as per drg of size 900x25x100mm. |
| 49 | S&F of new Buffers. |
| 50 | Tightening of complete table by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site. |
| 51 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 52 | TABLE DINING 8 PERSONS (FD-376/30M)Repair/Replacement of following U/S parts of \\"Table Dining 8 Persons\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F new top of prelaminated particle board 19mm thick of teak shade of size 1800x900mm covered with 4mm thick teak wood beading all round complete. |
| 53 | S&F of new legs with 1st class hard wood (Shisham/Teak) made to shape as per drg of size 740x60x60mm. |
| 54 | S&F of new top long rail of 1st class hard wood (Shisham/Teak) made to shape as per drg of size 1400x25x100mm. |
| 55 | S&F of new top short rail of 1st class hard wood (Shisham/Teak) made to shape as per drg of size 900x25x100mm. |
| 56 | S&F of new Buffers. |
| 57 | Tightening of complete table by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site. |
| 58 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 59 | TEAPOY WOODEN (FD-232/278/382/34M)Repair/Replacement of following U/S parts of \\"Teapoy\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F new top of 18/19mm prelaminated MDF board of exterior grade size 600x400mm with 4mm thick half round beading all round of table top as directed. |
| 60 | S&F of new legs of 1st class hard wood (Shisham/Teak) made to shape as per drg of size 525x45x15mm. |
| 61 | S&F of new long rails of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 62 | S&F of new short rails of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 63 | S&F of new stiffeners of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 64 | S&F of new Buffers. |
| 65 | Tightening of complete table by suitable size nails made of bamboo & wood corner (wherever required) as directed by Engr-in-Charge on site. |
| 66 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 67 | PEG TABLE (FD-277/25M/236)Repair/Replacement of following U/S parts of \\"Peg Table\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F new top of 18/19mm prelaminated MDF board of exterior grade size 450x300mm with 4mm thick half round beading all round of table top as directed. |
| 68 | S&F of new legs of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 69 | S&F of new long rails of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 70 | S&F of new short rails of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 71 | S&F of new stiffeners of 1st class hard wood (Shisham/Teak) made to shape as per drg. |
| 72 | S&F of new Buffers. |
| 73 | Tightening of complete table by suitable size nails made of bamboo & wood corner (wherever required) as directed by Engr-in-Charge on site. |
| 74 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 75 | CHAIR DINING MAP OFFICER (FD/MAP-II/04)Repair/Replacement of following U/S parts of \\"Chair Dining MAP Officer\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F of new front legs of 1st class hard wood (Teak). |
| 76 | S&F of new rear legs of 1st class hard wood (Teak). |
| 77 | S&F of new stiffeners of 1st class hard wood (Teak). |
| 78 | Replacement of old torn U/S cloth of seat with new synthetic tapestry cloth of best quality not less than Rs.350/mtr as approved by GE, along with new markin cloth of matching colours as per drg or as directed. |
| 79 | Repair/Replacement of U/S plywood of seat with 6mm new commercial plywood. |
| 80 | Replacement of U/S foam of seat with new foam of 75mm thick with 40 density and fixing it with seat as per drg or as directed. |
| 81 | S&F of new Buffers. |
| 82 | Tightening of complete chair by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site. |
| 83 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 84 | CHAIR WOODEN BOTTOM / CHAIR DINING JCO/OR (FD-285/MAP-II/05)Repair/Replacement of following U/S parts of \\"Chair Wooden Bottom / Chair Dining JCO/OR\\" with suitable new parts (teak wood) of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge.S&F of new front legs of 1st class hard wood (Shisham/Teak). |
| 85 | S&F of new rear legs of 1st class hard wood (Shisham/Teak). |
| 86 | S&F of new front/rear rails of 1st class hard wood (Shisham/Teak). |
| 87 | S&F of new side rails of 1st class hard wood (Shisham/Teak). |
| 88 | S&F of new stiffeners bearer of 1st class hard wood (Shisham/Teak). |
| 89 | S&F of new 4mm thick PVC seat with holes (not less than 0.500 kg) along with wooden support in the middle as directed by Engr-in-Charge. |
| 90 | M&L for seat of chair wooden bottom made out of plywood commercial BWR Grade 6mm thick of size & shape as per drg including fixing of seat with steel screws complete.Make: Assam/Kit Ply/Sharda/Greenply/Century. |
| 91 | S&F of new Buffers. |
| 92 | Tightening of complete chair by suitable size bamboo skewers & wood corner as directed by Engr-in-Charge on site. |
| 93 | M&L one or more coat walnut wooden polish of approved shade and quality and one coat of lacquer polish for smooth shining and finish (after rubbing/scrapping and filling) to complete side. |
| 94 | BED HARD PLY TOP (FD/E6/MAP/08)Repair/Replacement of U/S parts of \\"Bed Hard Ply Top\\" complete as directed.S&F 12mm thick BWR phenol bonded commercial plywood on top of the bed of existing size (approx 1875x900mm) duly fixed with screws/bolts. Make: Assam/Kit Ply/Sharda/Greenply/Century. |
| 95 | S&F new MS flat 40x4mm stiffener duly welded with bed frame as per drg. |
| 96 | S&F of new hard rubber shoes (black) to legs. |
| 97 | Preparation of old painted steel surfaces and applying two coats of black synthetic enamel paint including rubber shoes. |
| 98 | BOOK CASE WOODEN (FD-45M/237/147)Repair/Replacement of U/S parts of \\"Book Case Wooden\\" complete as directed.S&F new shelves of 18mm prelaminated MDF board with 4mm thick half round teak wood beading. |
| 99 | S&F new side planks of 18mm prelaminated MDF board with 4mm teak beading. |
| 100 | S&F new back panel of 6mm thick commercial plywood BWR grade. |
| 101 | S&F new door shutters of 18mm MDF with hinges 75mm-02 Nos, handle and magnetic catcher. |
| 102 | S&F of new Buffers. |
| 103 | Tightening of complete book case by suitable size nails & screw as directed. |
| 104 | M&L for two or more coats walnut/lacquer polish for all beading and view portion. |
| 105 | LOCKER BED SIDE FD (FD-1029/FD-257/SK-572)Repair/Replacement of U/S parts of \\"Locker Bed Side FD\\" complete as directed.S&F new top of 18mm prelaminated MDF board with 4mm half round teak wood beading. |
| 106 | S&F new side planks of 18mm prelaminated MDF board with 4mm teak beading. |
| 107 | S&F different new parts of drawer: Top/Side/Bottom made of 18mm MDF & 12mm plywood with 4mm teak beading. |
| 108 | S&F new door shutter of 18mm MDF with handle and hasp & staple CP. |
| 109 | S&F new 6mm thick back ply as per drg. |
| 110 | S&F of new HD MS ball bearing telescopic channel for drawer. |
| 111 | S&F of new handle/knobs for drawer as approved by GE. |
| 112 | S&F of new Buffers. |
| 113 | Tightening of complete locker by suitable size nails & screw as directed. |
| 114 | M&L for two or more coats walnut/lacquer polish for all beading and view portion. |
| 115 | TABLE BED SIDE (FD/E6/MAP/15/SK-572)Repair/Replacement of U/S parts of \\"Table Bed Side\\" complete as directed.S&F new top of 18mm prelaminated MDF board with 4mm teak beading all round. |
| 116 | S&F new side planks 230x510mm of 18mm MDF with 4mm teak beading. |
| 117 | S&F different new parts of drawers made of 18mm MDF & 12mm plywood with 4mm teak beading. |
| 118 | S&F new 6mm thick back ply as per drg. |
| 119 | S&F of new HD MS ball bearing telescopic channel for drawer. |
| 120 | S&F of new handle/knobs for drawer as approved by GE. |
| 121 | S&F of new hard rubber shoes (black) to legs. |
| 122 | S&F of new Buffers. |
| 123 | Tightening by suitable size nails as directed. |
| 124 | M&L for two or more coats walnut/lacquer polish. |
| 125 | SIDE BOARD WOODEN (FD-34M/235)Repair/Replacement of U/S parts of \\"Side Board\\" complete as directed.S&F new top of 18mm MDF with 4mm teak beading. |
| 126 | S&F new side planks of 18mm MDF with 4mm teak beading. |
| 127 | S&F new shelves of 18mm MDF with 4mm teak beading. |
| 128 | S&F drawer parts made of 18mm MDF & 12mm plywood with teak beading. |
| 129 | S&F new door shutters of 18mm MDF with hinges, handle and magnetic catcher. |
| 130 | S&F new 6mm thick back ply. |
| 131 | S&F of new HD MS telescopic channel for drawer. |
| 132 | S&F of new legs of 1st class hard wood (Teak/Shisham). |
| 133 | S&F of new Buffers. |
| 134 | Tightening by suitable size nails & screw as directed. |
| 135 | M&L for two or more coats walnut/lacquer polish. |
| 136 | SOFA SET WOODEN (FD-281/MAP-II/10)Repair/Replacement of U/S parts of \\"Sofa Set (3+1+1)\\" complete as directed.S&F new front/rear legs of Teak for 3 seater sofa. |
| 137 | S&F new front/rear legs of Teak for single seater sofa. |
| 138 | S&F new arms/arm rest of Teak as per drg. |
| 139 | S&F new rails/stiffeners of Teak as per drg. |
| 140 | Replacement of seat/back cushion cloth with new velvet cloth min Rs.350/mtr with TKK chain and markin cloth. |
| 141 | Replacement of seat cushion foam with PU foam 100mm thick 40 density. |
| 142 | Replacement of back cushion foam with PU foam 75mm thick 32 density. |
| 143 | Repair of 3 seater sofa frame with tightening. |
| 144 | Repair of single seater sofa frame with tightening. |
| 145 | S&F of new Buffers. |
| 146 | M&L for walnut/lacquer polish for all wooden view portions of sofa set. |
| 147 | TABLE WRITING WOODEN (FD-33M/248/275)Repair/Replacement of U/S parts of \\"Table Writing\\" complete as directed.S&F new top of 18mm MDF 1145x600mm with 4mm teak beading all round. |
| 148 | S&F drawer parts made of 18mm MDF & 12mm plywood with teak beading. |
| 149 | S&F of new HD MS telescopic channel for drawer. |
| 150 | S&F new handle/knobs of approved quality. |
| 151 | S&F of new legs of Teak/Shisham 760x60x60mm. |
| 152 | S&F of new rails/stiffeners of Teak/Shisham. |
| 153 | S&F of new Buffers. |
| 154 | Tightening by bamboo skewers & wood corner as directed. |
| 155 | M&L walnut polish and lacquer polish for smooth finish. |
| 156 | TABLE CENTER / COFFEE TABLE (FD-382/232/278)Repair/Replacement of U/S parts of \\"Table Center\\" complete as directed.S&F new top of 18mm MDF 900x600mm with 4mm teak beading all round. |
| 157 | S&F new bottom shelf of 18mm MDF with 4mm teak beading. |
| 158 | S&F of new legs of Teak/Shisham. |
| 159 | S&F of new long rails of Teak/Shisham. |
| 160 | S&F of new short rails of Teak/Shisham. |
| 161 | S&F of new stiffeners of Teak/Shisham. |
| 162 | S&F of new Buffers. |
| 163 | Tightening by bamboo skewers & wood corner as directed. |
| 164 | M&L walnut polish and lacquer polish for smooth finish. |
| 165 | TABLE 900x600mm WOODEN WITH DRAWER (FD-283/41M)Repair/Replacement of U/S parts of \\"Table 3x2\\" complete as directed.M&L for replacement of table top 900x600mm with prelam particle board 18mm with 4mm teak beading all round. |
| 166 | S&F drawer parts made of 18mm MDF & 12mm plywood with teak beading. |
| 167 | S&F of new HD MS telescopic channel for drawer. |
| 168 | S&F new handle/knobs of approved quality. |
| 169 | S&F of new legs of Shisham/Teak 760x60x60mm. |
| 170 | S&F of new rails/stiffeners of Shisham/Teak. |
| 171 | S&F of new Buffers. |
| 172 | Tightening by bamboo skewers & wood corner as directed. |
| 173 | M&L walnut polish and lacquer polish for smooth finish. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender