Tender For Provn Of Street Light At Bomdila And Covering Of Fire Fighting Tank With Iron Grill/ Wire Mesh Near Smb Ph-Ii Of Jat And Hard Standing For Washing Utensils And Covered Drain Near Bldg No Ch-35 Of Sikh Li Of Age B/R And E/M Under Ge Tenga
Tender Value
47.30 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
20 days left
EMD
94600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Street Light At Bomdila And Covering Of Fire Fighting Tank With Iron Grill/ Wire Mesh Near Smb Ph-Ii Of Jat And Hard Standing For Washing Utensils And Covered Drain Near Bldg No Ch-35 Of Sikh Li Of Age B/R And E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | M&L precast solid block masonry of block 1:2:4 type B-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth with out using extra cement all as specified. |
| 3 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 5 | M&L for hard core broken to guage n exc 63mm with broken stone/ boulders complete all as specified and directed |
| 6 | M&L for 100 mm thick PCC type B-2, 1:2:4 (40mm graded aggregate) as in sub-base, floors and pavings etc complete all as secified and directed. |
| 7 | M&L for Chequered cement concrete tiles 20cm x 20cmx 25mm thick,set,jointed and pointed in neat cement slurry and finish with grey cement & pigment with glossy finish over and including 15mm thick screed bed 1:6 cement mortar as per specified |
| 8 | S&F mild steel framed work Fe 410-W (Gde E-250) quality A as in door shutters of angles or other section with gusset plates rails, braces,jalli, etc complete drilling welding for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including as per specified and directed |
| 9 | M&L for PCC 1:3:6 type C0 using 12.5 mm graded agg as in back filling of hold fast complete all as specified and directed. |
| 10 | M&L for Preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of black japan paint over a coat of red oxide complete all specified and directed. |
| 11 | S&F of 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all specified and directed. |
| 12 | S & F chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 13 | Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over and including 10mm thick rendering with CM 1:4 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified. |
| 14 | M&L 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) in sub-base complete all as specified and as directed. |
| 15 | M&L non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 15mm thick screed bed in CM 1:6 complete |
| 16 | M/L for 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in floor /base complete all as specified and as directed. |
| 17 | S&F 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as per specified and directed |
| 18 | M & L for screed bed or bedding layer of 20 mm thick for laying floor finishes in CM (1:4 ) complete all specified and directed |
| 19 | S & F polythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 20 | S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified |
| 21 | M&L rolled mild steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc, Fe- 290 (Gde E- 165).complete all specified and directed |
| 22 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 23 | M&L for reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all specified and directed |
| 24 | Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) including fair finishing complete all as specified and directed |
| 25 | Use and waste of flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 26 | M&L for preparation of new plastered or unplastered surface of walls and applying two coats of acrylic Emulsion distemper any tint over a coat of primer complete all as specifed and as directed. |
| 27 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil. |
| 28 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation of post or struts. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified . |
| 30 | Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with two coats of aluminium paint over one coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. |
| 31 | S&F of kirlosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 250x200x100mm, IP 66 fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. Make :- Sintex/Supreme/Hensel |
| 32 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, GI brackets for fixing LED street light fitting fabricated out of GI tubing 32 mm dia, medium grade, .9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 33 | M& L for cable 1.5 sqmm 3 core PVC insulated multistranded copper cable with PVC insulated copper conductor with PVC cover for connection between Junction box and street light with all as spd and directed. |
| 34 | Supply & Lay XLPE insulated screened PVC bedded,galvanized steel strip or wire armored, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 10 Sq mm 4 core. |
| 35 | Supply & Lay XLPE insulated screened PVC bedded,galvanized steel strip or wire armored, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 70 Sq mm 3½ core. |
| 36 | Supply & Lay XLPE insulated screened PVC bedded,galvanized steel strip or wire armored, electric power cables (heavy duty) 1100V grade with stranded aluminium conductor of size 16 Sq mm 2 core. |
| 37 | M&L for PCC 1:3:6 Type C2 for erection of pole in base with 40 mm gradede coarse agreegete complete all as specified and as directed. |
| 38 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out soil complete all as specified and as directed. |
| 39 | Returning filling in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 40 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 41 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 42 | Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection , laid flat ie length of cable cover shall be laid across the cable all as specified and directed |
| 43 | M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed. |
| 44 | Supply and laying galvanised tube light grade ISI marked of size 80 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 45 | Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 46 | Supply,installation,testing and commissioning 3 phase and neutral , 415 volts out door type , CPRI approved, factory made free standing , floor mounting ,dust and vermin proof, cubical type LT Feeder Pillar fabricated from 3.15 mm thick CRCA sheet for outer shell and 2.0 mm for inner shell, with angle iron frame of 50 x 50 x 6 mm , double door , front and back openable type, double door system, hinged opening , rubber lining,locking arrangement,with anticorrosive coating and finally epoxy polyester power coating with pure polyster Siemens grey structural RAL-7032 shade , protection class IP-54 fully compartmentalize design with 4 nos of bus bar made of Aluminium suitable for 200 Amps pre-wired with suitable size of Aluminium Strip with colour code for connecting out going MCCB/ MCB`s, including suitable aluminium earth strips conforming to IS with danger notice plate , necessary cable glands, cable connection with proper lugs ,PCC foundation and pedestal for fixing piller feeder box with PCC 1:5:10 , 15 cm thick in foundation , brick (Fly ash) / PCC block work in CM 1:6 , rendering 1:6 on exposed surface and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting bolts etc for panel. The plateform shall be of 450 mm height above ground level all as specified with supply and fixing the following. |
| 47 | (A) Incoming : (i) MCCB 125 Amps rating, 4 pole , 415 V, AC, 50 HZ, thermal Magnetic release type, having thermal release range 100-125 Amp with adjustable overload and short circuit setting, Ics=100 % Icu , Service breaking capacity 25 kA - 01 Nos (ii) Digital 3 Phase Ammeter, Flush mounting, 96 x 96 mm, Accuracy class 1.0, with inbuilt selector switch for three phase, CT/PT site programable ---01 Nos with Suitable CT as per MCCB and wiring with copper wire.(iii) Digital 3 Phase Voltmeter, Flush mounting, 96 x 96 mm, Accuracy class 1.0, with inbuilt selector switch for three phase, CT/PT site programable- 01 No(iv) Three indication lamps- 01 Set (Red, Yellow, Blue). (B) Outgoing : (i) MCCB 63 Amp ,3 Pole, 25 kA, 415 volts, AC, 50Hz thermal adjustable type 50-63Amp - 04 Nos (ii) MCB 3 Pole 415 volts, 16 Amps 10 KA for out going :- 03 Nos (iii) MCB SPN 220 volts, 16 Amps 10 KA for out going :- 04 Nos (iv) Astronomical Time Switch 32 Amps 24 hour programming type with ML-4 contractor 70A, 415 V, three phae, coil operating voltage 230 V, three point Auto manual switch 25 Amps for bypass system with 32A 4P MCCB adjustable (40% to 100%) Microprocessor release, 25KA complete including necessary connection. |
| 48 | M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6 mm thick burried directly in ground ( earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 2009 connected all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, funnel, PCC chamber ( 1 : 3 : 6) type C1, RCC pit cover , charcol, salt including provision of earth lead protected by 50 mm dia light grade GI pipe and 25 mm dia medium grade GI Pipe for watering complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender