Tender For Repair To Internal Road In Zone-I & Ii And Adjacent Area Under Age B/R-Ii Of Ge (North) Meerut Cantt
Tender Value
65 Lakhs
Estimated cost
Bid Submission
24 Aug 2026
0 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Internal Road In Zone-I & Ii And Adjacent Area Under Age B/R-Ii Of Ge (North) Meerut Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparing the black top surface of roads in patches with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887at a rate of application of 0.2-0.3 kg/Sqm on bituminous surface as spcified in Table 500-5 OF MoRTH specificaction for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed. |
| 2 | M&L for Premix bituminous macadam paving bitumen any penetrationlaid/rolled and compacted to required gradient and camber (consolidated thickness n. exc 75mm) using 4% binder (Viscosity grade VG 30) with 8 to 12 tone power roller complete all as specified and directed. |
| 3 | M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat Vg 10/Vg 30@ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder Vg 10/Vg 30 @9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed. |
| 4 | M&L for emergent repairing of potholes of Avg thickness 20mm to 75mm and stiches on the existing road surface top top priority using ready mix cold mix bituminous (CRRI) approvrd in 50 kg bags including cleaning, filling and compaction as per IRC: 116 and open to traffice after 10 minutes complete all as specified and directed. |
| 5 | M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness in patches with 5% binder (viscosity grade VG-30) content by weight of total mix, includung seal coat rolled and compacted to required camber and gradient, and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. |
| 6 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like, 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 7 | S&F in repairs Bi-Directional Reflective type road solar studs (125mm x 125mm x 25mm) illuminated red both sides of rectangular / square shape made out of thermoplastic body fixed on road with bitumen adhesive as per manufacturers instructions having abrasion resistance ceramic coating and reflective surface complete all as specified and directed. |
| 8 | S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 9 | S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 10 | S&F in repairs yellow and black plastic speed bump made up of ABS materials to highly reflective reflector moulded in EMMA material welded with ABS base plate through ultrasonic welding processes of size 350mm length and width of 263mm with working width of 250mm, height 53mm and weight appx 1200gms complete all as specified and directed. |
| 11 | S&F in repair retro relective direction and place identification sign boards by providing and fixing of new retro reflectorised cautionary, mandatory and informatory sign as per ASTM D 4956-04 made of high intensity grade Microprismatics sheeting Type IV fixed over 4.0mm thick Aluminium composite panel of size (900 - 1200mm) x (600 - 900mm) fixed to frame of stainless steel hollow square section of size not less than 25mm with necessary fixing arrangementns and having vertical post not less than 50mm round buffed stainless steel of grade SS 304 with half round cap wherever required back support on above ground level 2.00 - 2.50m and below ground level 0.50m directed by Engr in charge. The message symbol and numerals shall be of 3M high intensity micro-Prismatic Grade Retro reflective sheeting or equivalent (message and numbers as per approved by GE of any number of lettes and numbers) with and including complete foundation work of size 450mm x 450mm x 600mm like excavation,PCC (1:2:4) type B2 (using 40mm grade stone agg) removal, Returning/filling/ removal surplus soil and eracion at site complete all as specified and directed. |
| 12 | S & F in repair road side safety traffic convex mirror of dia 32 inches with radius of curvature 500-700mm of thickness 4-6mm ( acrylic) and optical specificats are 120-150 degrees, reflective coating of aluminium or silver with reflectyvity 85-95% with and including material and mounting on 50mm dia stainless steel pipe of grade SS 304 medium grade pipe of minimum height 2.0 to 3.0m above GL and 0.50 below GL fixing with bracket, clamp and adhesive if any required as per manufactures instructions including foundation work (size 450 x 450 x 600mm) excavation, PCC 1:2:4 (using 40mm graded stone aggregates) complete all as specified and directed. |
| 13 | S & F in repair road side safety traffic convex mirror of dia 32inches with radius of curvature 500-700mm of thickness 4-6mm ( acrylic) and optical specificats are 120-150 degrees, reflective coating of aluminium or silver with reflectyvity 85-95% with and including mounting on existing pipe including fixing with bracket, clamp and nut bolt etc complete all as specified and directed. |
| 14 | M&L PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) as in foundations, fillings, Mass concrete, footings etc incuding demolition complete all as specified & directed. |
| 15 | Excavating in post holes (or similar holes) each n exc 0.5 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 17 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note :- Height of bldg can be more than 10 meters. |
| 18 | S&F road sign such as mandatory sign board 1.5mm thick mild steel sheet boards ,1mm thick hexagonal patter retro reflective self adhesive plastic stickers sheets of approved colour as per size design and one another hexagonal patten retro reflective self adhesive plastic sticker sheet laseer cutted figures such as direction signs, photoes, words and alphabets. The specification and size as per manufacturesrs instruction complete all aas specified and directed. |
| 19 | S&F 1mm thick hexagonal patter retro reflective self adhesive plastic stickers sheets of approved colour as per size design and pasted on aluminium composite panel exterior grade sheet including laser cutted figures such as direction signs, photoes, words and alphabets complete all aas specified and directed. |
| 20 | M&L providing and laying at or near ground level factory made kerb stone of approced shape and size of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 21 | M&L for prepration of old or previously untreated Surfaces of any description/concrete surfaces kerb stone, road side sign board etc over 10cm girth or width, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 24, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender