Tender For Development Of 1000 Mt Capacity Rural Godown At Dahutia Under Jorhat Dist. Regulated Market Committee.
Tender Value
16.65 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
19 days left
EMD
33300
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of 1000 Mt Capacity Rural Godown At Dahutia Under Jorhat Dist. Regulated Market Committee.
BOQ
| Sl. No. | Item Description |
| 1 | 2.25(a): Excavating supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth sides of foundation etc. complete. |
| 2 | 4.17: Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zóne III) derived from natural sources) over 75 mm thick bed of dry ballast 40/mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 3 | 6.1: Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:6.1.2: Cement mortar 1:6 |
| 4 | 6.4 Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:66.4.2: Parapet wall above C.G.I sheet Roof |
| 5 | 10.16: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. m210.16.1: Hot finished welded type tubes |
| 6 | 11.3: Cement concrete flooring 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.11.3.1: 40 mm thick with 20 mm nominal size stone aggregate |
| 7 | 11.6: Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), 11.6.1: finished with a floating coat of neat cement.18 mm thick |
| 8 | 12.50: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | 12.51: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:12.51.1: Ridges plain (500-600) mm. |
| 10 | 13.8: 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix13.8.2: 1:4 (1 cement : 4 fine sand) |
| 11 | 13.48: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufactures specifications 13.48.3: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sq m over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 12 | 13.50: Applying primingcoat :13.50.3: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works |
| 13 | 13.81: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/litre, or approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.13.81.2: Two coats. |
| 14 | 14.5: Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :14.5.1: Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 15 | 15.7: Demolishing brick work manually/by mechanical means including stacking of servicebale material and disposal of unserviceable material within 50 metres led as per direction of Engineer-in-charge.15.7.4: In cement mortar |
| 16 | 15.28: Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of :15.28.1: G.S Sheet |
| 17 | M.R : Repairing of 2 Nos. existing shutters of the Godown by tempering of shutter, gressing etc. complete untile moving easily |
| 18 | M.R: Providing, fitting and fixing reputed make Turbo ventilator of the dimensions/ specification given below on the roof of godown including making good of the roofing. If required complete as directed and specified Throat dia : 610 mmHeight : 450 mmNo. of vanes : 42Fan weight : 6 kgs (approx.)Base weight : 5 kgs (approx..)Top cover : 0.3 mm thick galvanised two coats of paintingShaft assembly : M.S Hard crome plated.Bearing : Twin ZZ ball bearings encased in single integrated bearing housing. Turbine blades : 0.3 mm thick aluminium bladeThroat ring : 0.6 mm thickBottom ring : 0.6 mm thickAir distribution core : 0.6Rivets : High tensile Aluminiumrevets.Top cover screw : Stainless steel. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender