Tender For Renovation Of Emergency Water Storage Pond And Carrying Out Allied Civil Works At Rlg Building, Barc, Trombay, Mumbai-85
Tender Value
1.12 Crore
Estimated cost
Bid Submission
17 Aug 2026
25 days left
EMD
2.65 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Emergency Water Storage Pond And Carrying Out Allied Civil Works At Rlg Building, Barc, Trombay, Mumbai-85
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead |
| 3 | Providing and fixing Designer Moasic tiles suitable for Premium water pool flooring of approved make in different sizes having minimum thickness about 8 mm thick tiles a size about 25 mm x 12.5 mm or approved size conforming to ISO 10545-2/ IS 13630-1 in all colours and shades in Glossy or Matt or satin finish with anti skid laid over a bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge |
| 4 | Providing and fixing Designer Glass Mosaic Tiles suitable for Premium water pool vertical/wall surfaces of approved make thickness about 8 mm size of 23 mm x 23 mm or apporved, conforming to IS 10545 in all colours and shades in Glossy or Matt or satin finish laid over ready surface and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge |
| 5 | Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge |
| 6 | Extra over above item for supplying and applying of premium and specialized Polymer-modified tile adhesives of approved make etc complete generally as per specifications and as directed by EIC. |
| 7 | Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel 2) Cleaning the re bars with Acetone for complete rust removal and washing with water . 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1: 1.5 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) including providing and erecting of scaffolding at site etc complete as per specifciation and as directed by EIC |
| 8 | Providing and painting walls with (TWO coats) of approved shade of high build protective , elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in- charge. |
| 9 | Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. |
| 10 | Charges for dismantling and removal of 6 mm thick plain glasses from exising Aluminium glazed partitions, doors including stacking of within 100 m lead, disposal off the same at outside as per approval method at outside for recycling basis etc complete as per clause of specifications and as directed by Engineer-in-charge. |
| 11 | Charges for dismantling and removal of aluminium sections/tubes from exising Aluminium glazed partitions, doors including stacking of within 100 m lead, disposal off the same to TVS stores of BARC Trombay from RLG by mechanical transport etc complete as per clause of specifications and as directed by Engineer: Area of partition-about 290 SqM |
| 12 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners of approved size and make including filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings etc. (glazing and panelling shall be paid for separately). Anodized- Silver/other approved shade-15 MICRON MINIMUM etc complete as per specificaitons and as directed by EIC |
| 13 | Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) |
| 14 | Providing and fixing glazing with 6 mm thick toughened float glass in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item).With toughened float glass panes of 6.00 mm thickness |
| 15 | Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width |
| 16 | Providing and Painting two coats of aluminium paint on aluminium circular solar disc roofing surfaces from bottom and upper side with approved brand and manufacture to give an even shade over a primer coat by spraying paint with recommeded pressure at height of 6 M from Floor level including preparation of the surfaces, scaffolding, providing of compressor & accessories equipment for spray paint including jointing of existing aluminium circular solar discs by applying of 6 mm dia aluminium blind rivet with using special rivet machine etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 17 | Providing and fixing Shade Net Specially Designed for sun protection And Dust protection over wires ropes roofing consisting with HDPE, Thickness : 120 GSM, Size- 6 meter x 50 meter including providing and tieing by using nylon wire ropes of suitable size including removal of same before monsoon etc. complete as per specifications and as directed by EIC |
| 18 | Carrying out miscellaneous civil works like carpentry, plumbing, removing/shifting of equipment, machines, tools, earth excavation by supplying Mandays etc. complete as per specification and as directed by Engineer-In-charge. |
| 19 | Providing, rubbing and mirror finish polishing in minimum three levels to obtain required finish to existing Precast terrazo tiles flooring, jointed with neat cement slurry mixed with pigments to match the shade of tiles including apply cementitious or resinous filler to fill pinholes and voids, which is essential for a uniform, durable surface, apply a specialized crystallization chemical and buff with a red pad to create a mirror-like finish, high-quality sealer to protect the floor from stains all as per specifications and as directed by EIC. |
| 20 | Providing and Laying precast terrazo tiles not less than 22 mm thick with graded marble chips of sizes up to 12 mm laid in floors and landings, jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing minimum 3 polishes to get required finish / smoothness complete with precast tiles on 20 mm thick of cement mortar 1:4 (using crushed sand) and LIGHT shade pigment with white cement of approved pattern. (Terrazo tiles to be tested as per standards and got approved by Engineer / Architect befor procuring) as per specifications and as directed. |
| 21 | Providing SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-charge |
| 22 | Providing and fixing using Welded wire mesh of 50 mm x 50 mm x 5 mm thick as reinforcement using approved brands of BARC only |
| 23 | Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels |
| 24 | Providing and fixing 35 mm thick minimum factory made solid flush door shutters conforming to IS : 2202 decorative high pressure 1.5 mm thick laminated sheet of approved finish & shade with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type Stype, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete etc complete generally as per specifications and as directed by EIC |
| 25 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters |
| 26 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings. |
| 27 | Providing and fixing doors louvers made with C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete |
| 28 | Stainless Steel 304 Mosquito Wire mesh Woven Wire Meshh Sheet, 15 Mesh, 0.4mm Hole, 1mm Thick, for Air Ventilation, Window Screen, Mosquito Net, Rat Mesh, Jali for door shutter louvers etc complete as per specifications and as directed by EIC |
| 29 | Removal and taking out doors, windlows and clear storey openings (steel / wood) shutter including removing of door closer, handles, lock, stacking within 100 m lead and disposal off the same as approved (only shutters) Of area within 3.00 Sq.M etc complete as per specifications and as directed by EIC |
| 30 | Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications. Dead Lock of approved make with both side Key Cylinder |
| 31 | Providing and fixing Heavy duty hydraulic door closers of Stainless Steel Door Closer TS 83 etc complete as per specifications and as directed by engineer in charge |
| 32 | Providing and fixing a pair of KICH PHH Model - 38 mm dia overall length of 1012 mm stainless steel handles 316 grade PHH 25 model of specified Dia and length handles in aluminium / glass / wooden doors complete all as per specifications and drawings.Sample to be approved by the Engineer-in-charge |
| 33 | Providing and fixing a pair of KICH PHH Model - 20 mm dia overall length of 250 mm stainless steel handles 316 grade PHH 25 model of specified Dia and length handles in aluminium / glass / wooden doors complete all as per specifications and drawings.Sample to be approved by the Engineer-in-charge |
| 34 | Providing and Laying 5 mm thick Epoxy screeding consisting of Araldite GY 257, 100 Parts by weight, Hardner HY 830, 40 parts by weight Hardner Hy 850, 20 parts plus quartz sand 900 parts over a primed surface with primer Aradldite GY 257, 100 parts by weight and Hardner HY 840, 50 parts by weight including application of 2 top coats based on Araldite 257, 100 parts Hardner HY 830, 40parts, Hardner HY 850, 20 Parts and flow control agent 1 to 3% with acrosil DTD 75, 3 parts complete as per CIBA geigy specification including preparation of surface to receive the treatment |
| 35 | Providing and fixing 1\\" Brass DN25 Fountain Nozzle Column Water Fountain Nozzle Sprinkler Spray Head for water Pond etc complete generally as per specifications and as directed by EIC |
| 36 | Providing & fixing 25 mm NB in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 37 | Provding, Laying , jointing, fixing and testing 25 mm NB Heavy quality (C- Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes. |
| 38 | Making connection of distribution branch with G.I main of 50 to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge |
| 39 | Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels |
| 40 | Extra for providing edge moulding to 17 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer-in-charge. |
| 41 | Providing and fixing white vitreous china laboratory sink of size 530 x 430 x 180 mm with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass trap with C.P. brass unions complete including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever required complete as per specifications and as directed by the Engineer-in-charge |
| 42 | Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge |
| 43 | Dismantling G.I pipes of all diameter from 15 mm to 40 mm dia in internal work etc. complete as per clause of technical specifications and as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender