Tender For Construction Of 200 Bed Super Specialty Hospital (Cardiology, Pulmonology & Nurology) At Kanke Ranchi
Tender Value
299.99 Crore
Estimated cost
Bid Submission
11 Aug 2026
9 days left
EMD
3.09 Crore
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 200 Bed Super Specialty Hospital (Cardiology, Pulmonology & Nurology) At Kanke Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Disposal of materials by Mechanical Transport including loading, unloading and stacking of Earth up to 5 km |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge. |
| 3 | All kinds of soil |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 5 | Ordinary rock |
| 6 | Hard rock (blasting prohibited ) |
| 7 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming,watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 8 | All kinds of soil. |
| 9 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 10 | Pipes, cables etc. exceeding 300 mm dia . But not exceeding 600mm dia. |
| 11 | Open timbering over areas including strutting, shoring etc. complete. (Measurements to be taken of the face area timbered): |
| 12 | Depth exceeding 3 m but not exceeding 4.5 m |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 14 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 15 | All kinds of soil |
| 16 | From 1.50 mtr. to 3.00 mtr. |
| 17 | From 3.00 mtr. to 4.50 mtr. |
| 18 | From 4.50 mtr. to 6.00 mtr. |
| 19 | Ordinary or hard rock |
| 20 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 21 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 22 | All kinds of soil |
| 23 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 24 | Supplying chemical emulsion in sealed containers including delivery as specified. |
| 25 | Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 26 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
| 27 | Treatment of soil under existing floors using chemical emulsion @one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor: |
| 28 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 30 | 1:2:4 (1 cement : 2 coarse sand) derived from natural sources : 4 raded stone aggregate 20 mm nominal size derived from natural sources) |
| 31 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 33 | Foundations, footings, bases for columns |
| 34 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 35 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: |
| 36 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 37 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-Ill) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 38 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 39 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 40 | REINFORCED CEMENT CONCRETE |
| 41 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 42 | Foundations, footings, bases of columns, etc. for mass concrete |
| 43 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 44 | Suspended floors, roofs, landings, balconies and access platform |
| 45 | Shelves (Cast in situ) |
| 46 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 47 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 48 | Stairs, (excluding landings) except spiral-staircases |
| 49 | Extra for shuttering in circular work (20% of respective centering and shuttering items) |
| 50 | For beam portion |
| 51 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like |
| 52 | Edges of slabs and breaks in floors and walls |
| 53 | Under 20 cm wide |
| 54 | Weather shade, Chajjas, corbels etc., including edges |
| 55 | Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). |
| 56 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) |
| 57 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 58 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 59 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 60 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 61 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 62 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 63 | All works upto plinth level |
| 64 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 65 | Concrete of M30 grade with minimum cement content of 350 kg /cum |
| 66 | All works above plinth level upto floor V level |
| 67 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 68 | Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. |
| 69 | Providing and fixing parallel threaded couplers conforming to IS code on \\"Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement- Specification . to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer- in-Charge. |
| 70 | Coupler for 16 mm diameter reinforcement bar |
| 71 | Coupler for 20 mm diameter reinforcement bar |
| 72 | Coupler for 25 mm diameter reinforcement bar |
| 73 | Coupler for 28 mm diameter reinforcement bar |
| 74 | Coupler for 32 mm diameter reinforcement bar |
| 75 | Floor Joint 100mm Providing & Fixing of Expansion Joint system related with the Floor to Floor/ Floor to Wall Expansion Joint Cover for 100 mm Expansion Joints Aluminium Covers Profiles, having a Hard Wearing, Maintenance Free, long Lasting design. The surface of the Exp. Joint Covers should have Serrated Surface for Skid Resistance and should be ADA Compliant. The exposed surface should not exceed 113mm.The design of the Exp. Joint Cover System should be such that it should avoid any accumulation of dirt. The Exp. Joint Cover should have an Articulated Telescope Design so as to accommodate the movements in 3 directions. The system should be in alloy 6063 T66 in Mill finish and the total exposed surface of the profile should not be more than 113 & the installation Height can be of 35 mm. The system can be used for standard Rolling loads of private Cars or Cart wheel loads. The system should have ASTM1399 E certification. The extrusion should be as ASTM 6063 T66 standards. The System shall be such that it will be flushed with the finish The System should be ASTM-E 1399. Provision of Moiser Barrier in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by the Engineer-in-Charge. |
| 76 | Floor Joint of 100 mm gap |
| 77 | Providing & Fixing of Expansion Joint system related with the WALL to WALL (Internal / External) Location as per drawing and direction of engineer –In- Charge. Expansion Joint The design of the Joint Cover System should be such that the system should snap onto a 50mm wide, hook shaped aluminum clip. The system should have gasket seals on the edges to provide scratch protection to the wall finish and prevent accumulation of dust. The system should be in 6063 alloy in clear anodized matt finish. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement for all external area as per the manufactures design and as approved by the Engineer-in-Charge. |
| 78 | Wall Joint of 100 mm gap |
| 79 | Providing and fixing of expansion joint system of approved make and Manufactures for various roof locations as per approved drawings and Direction of Engineer-In-Charge. The joints shall be of extruded aluminium base members with, self aligning and self centring arrangement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to Accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centring arrangement that freely rotates / moves in all directions. The Self centring arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063 |
| 80 | Roof Joint of 100 mm gap |
| 81 | MASONRY WORK |
| 82 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 83 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 84 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 85 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: |
| 86 | Cement mortar 1:6 (1 cement :6 coarse sand) |
| 87 | Extra for brick work I AAC block masonry I Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. |
| 88 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor Vlevel. |
| 89 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 90 | Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry. |
| 91 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to 15:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). |
| 92 | CLADDING WORK |
| 93 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 94 | Granite stone slab colour black, Cherry/Ruby red |
| 95 | Area of slab over 0.50 sqm |
| 96 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 97 | Granite work |
| 98 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 99 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 100 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 101 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building ,for all heights and all levels etc. including:(a)Structural analysis & design and preparation of shop drawings for pressure equalisation or rainscreen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b)Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF I Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. |
| 102 | (c)The fastening brackets of Aluminium alloy 6005 T5 I MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perfonn as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the perfonnance characteristics all complete ,as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places. |
| 103 | Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. |
| 104 | 8 mm thick (mirror polished and machine cut edge) |
| 105 | Granite stone of any colour and shade |
| 106 | P/F of Lacquered glass paneling made using frame work of pinewood of section 2”x 2” grid form with 12mm ply fixed frame work free from any undulation. Top to be finished with 4 mm lacquered glasses (duly pasted to 12 mm ply using clear silicon) of specified color, pattern and sizes as per drawing and design. |
| 107 | WOOD AND P. V. C. WORK |
| 108 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moistureproof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 109 | Frame size 50 x 125 mm |
| 110 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 111 | 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws |
| 112 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 113 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): |
| 114 | Rectangular or square |
| 115 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). |
| 116 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 61O mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at comers (25 mm x 25 mm x 0.5 mm), joint finisher and two coats ofprimer suitable for board as per manufacture's specification and direction of engineer in charge all complete. |
| 117 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) |
| 118 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 119 | 1.0 mm thick |
| 120 | A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing confonning to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh I Glazing of plain/ toughened/ laminated/ double glass unit with I without high perfonnance coatings as per design requirements and confonning to IS: 3548 & IS: 16231 shall be paid separately. |
| 121 | Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. |
| 122 | Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). |
| 123 | Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. |
| 124 | Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre). |
| 125 | Fixed window I ventilator with mullion I transom. |
| 126 | Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). {Height upto 0.90 metre) |
| 127 | Providing and fixing panic bar/ latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. |
| 128 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded). |
| 129 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/ sqm) duly filled mineral wool insulation having density minimum 96 kg/ cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3 mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for separately). |
| 130 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (El20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & El. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing andcalibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. |
| 131 | Supply & Fixing 5 Knuckle, 2 bearing butt hinges size 4\\" x 3\\" x 3mm, in SS 304 and in satin stainless steel. As per EN 1935, CE Marked. Suitable for door weights upto 120kgs. as per direction of engineer-in-charge |
| 132 | Supply & Fixing rack and pinion door closer EN size 3-6, with standard arm and two independent closing valves and latching speed adjustable by arm. All adjustment screws face fixed with slide plate. For Door width upto 1400mm Silver finish. As per EN 1154 and CE marked. as per direction of engineer-in-charge |
| 133 | Supply & Fixing Automatic door bottom RP8si seal from Raven,extruded silicon sealing component, spring loaded to lift clear of the floor. Concealed mounted in a 15mm x 34mm groove. Max gap 13mm. Finish: Anadoised satin clear. L=920mm as per direction of engineer-in-charge |
| 134 | Supply & Fixing Surface mounted door coordinator for double doors SR 390, zinc plated for steel doors, non-Handed as per EN 1158 and CE marked. as per direction of engineer-in-charge |
| 135 | Supply & Fixing Delta Seal for acoustic, fire and smoke protection, suitable for wooden and steel frames, self adhesive, Finish = Black, Length = 1 x 2000mm, Height- 2 x 2750mm as per direction of engineer-in-charge |
| 136 | Supply & Fixing rack and pinion door closer EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154. as per direction of engineer-in-charge |
| 137 | Supply & Fixing Type 1 Lever Handle Package with Antiviral / Antimicrobial coated Lever Handle - clear & transparent coating with protection tested for antibacterial activity with up to 99.9% effectiveness* as per ISO 22196 and antiviral activity with 99.9% reduction as per ISO 21702. Pair Lever Handle on Roses & escutcheons. Including Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length both side key operation . as per direction of engineer-in-charge |
| 138 | Supply & Fixing floor stop half dome with 45mm dia with fixing accessories, in satin Chrome. as per direction of engineer-in-charge |
| 139 | Insulated Acoustic Door |
| 140 | Providing and fixing Fully Insulated Non Metallic Wooden Fire door at all levels. Wooden fire door should carry 120 minutes Insulation properties. Main Door frame shall be Single rebate profile of section 120 x 70 mm made out of Hard wood - Red meranti / Ivory Coast (2nd class ) as per requirement with factory made groove of suitable size so as to accommodate Fire & smoke seal of size 20x4mm . The frame must be primed with Fire retardant primer. Wooden shutter must be of minimum 52mm of thickness finished with commercial ply on both faces. The commercial ply must be finished with Fire retardant primer. The Commercial ply may also be pasted with Laminate in desired shade (payable in extra item). The composite thickness of the core insulation will be 44mm consists of Calcium Silicate boards of approved make and treated wool Insulation material. The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping . Vision panels wherever required should be of 120 minutes fire rated clear non-wired type. All hardware’s, Fasteners and FR Glass shall be payable in Extra item. Door shutter provided with commercial ply on both faces with 1mm Thick Regular SF grade Factory pasted Laminate on both faces and Main frame made out of hardwood frame. Frame primed with Fire retardant primer. FIXTURES OF DOORS: (A) Supply & fixing of SS Ball Bearing Hinges of size 100 x 75 x 3mm complete with SS Screws of BB1953 Becker Fire Solutions (4 No’s per panel), (B) Supply & fixing of anchor fasteners of M10X120mm length. (C) Supply & fixing of door closers of BLC-604 TS-89 (Except shaft door). (D) Supply & fixing of Stainless Tower Bolt 300mm Long for Double leaf door of height up to 2100mm with necessary screws as required. (E) Supply & fixing of Stainless Tower Bolt 600mm Long for Double leaf door of height up to 2400mm with necessary screws as required. (F) Supply and Filling the gap between wall & Door frame by using silicone sealant and Wool insulation on both side of the door |
| 141 | Three Track Windows with 2 Glass panels and 1 Mesh panel:Providing and Fixing of A2Z Series made of High performance factory made system Aluminium 3 Track Windows (2 Glass Panels & 1 Mesh Panel) with Akzonobel powder coating of 60-70 microns (Any RAL Colour). Section for outer frame should be of 86.5mm x 48mm, section for glass shutter should be of 64mm x 29mm, section for mesh shutter should be of 66.7mm x 29mm. 24mm DGU (Double Glazed Unit) of 6mm Solar Glass + 12mm Airgap + 6mm Solar Glass shall be used in all the windows & ventilators. Stainless Steel Wire Mesh shall be used in Wire mesh Shutters. All frame corners shall be joined/assembled using self-locating corner cleats (No screwing at corners shall be allowed). Weather silicon sealant of reputed make to be used to make glazing watertight. Single point locking system along with hardware of reputed make including heavy rollers for all the shutters, complete for finished item of work. |
| 142 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 143 | 2nd class teak wood |
| 144 | 50x12 mm |
| 145 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 146 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 147 | 250x16 mm |
| 148 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 149 | 250x10 mm |
| 150 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with ecessary screws etc. complete : |
| 151 | 125 mm |
| 152 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 153 | Twin rubber stopper |
| 154 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 155 | A Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing confonning to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh I Glazing of plain/ toughened/ laminated/ double glass unit with I without high perfonnance coatings as per design requirements and confonning to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for :(i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3(ii) Sites with structure height more than 20m for all wind speeds |
| 156 | Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. |
| 157 | Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). |
| 158 | 2000 Series Windows – Double Rebate WindowsProviding & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed . Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. |
| 159 | 3-Track Sliding Window Specification:-Providing and fixing of Three shutter vajra series Sliding Windows made of Pre Painted Steel and Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.58mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for Three Tracks size of 107 mm x 44 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with three integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminum 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window system at site using anchor fasteners, inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work. (Make: Elixir Met Form Pvt Ltd. / A2Z Infra Solutions / Urban Space) |
| 160 | STEEL WORK |
| 161 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 162 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) |
| 163 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 164 | 10 x 140 mm |
| 165 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 166 | Hot finished seamless type tubes |
| 167 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 168 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 169 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 170 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1and M.S. top cover of required thickness for rolling shutters. |
| 171 | 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 172 | Providing and fixing ball bearing for rolling shutters. |
| 173 | Extra for providing mechanical device chain and crank operation for operating rolling shutters. |
| 174 | Exceeding 10.00 sqm and upto 16.80 sqm in the area |
| 175 | Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured). |
| 176 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 177 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 178 | Profile B |
| 179 | Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 180 | FLOORING WORK |
| 181 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 182 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse sand), finished with a floating coat of neat cement. |
| 183 | 18 mm thick |
| 184 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. |
| 185 | Extra for pre finished nosing in treads of steps of Kata stone/ sand stone slab. |
| 186 | Extra for Kata stone/ sand stone in treads of steps and risers using single length above normal size up to 2.00 metre. |
| 187 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. |
| 188 | In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement :4 coarse sand) |
| 189 | Acid and alkali resistant tile |
| 190 | In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement :4 coarse sand) |
| 191 | Acid and alkali resistant tile |
| 192 | Extra for pre finished nosing to treads of steps of marble/granite stone. |
| 193 | Extra for marble/granite stone flooring in treads of steps and risers using single length up to 2.00 metre. |
| 194 | Kata stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 :4 (1 cement: 4 coarse sand): |
| 195 | 25 mm thick |
| 196 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 197 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. |
| 198 | Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. |
| 199 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 200 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 201 | Providing and fixing of 10 mm thick Laminated wooden flooring Classification of Use 23/32 (Heavy Domestic/General Commercial) with a Surface Abrasion Resistance of class AC4 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1291 mm X 135 mm having Uni fit locking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge) |
| 202 | Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 203 | Double charge vitrified tile polished finish of size |
| 204 | Size of Tile 600 x 1200 mm |
| 205 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 206 | Size of Tile 600 x 600 mm |
| 207 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to LS. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 208 | Size of Tile 600x600 mm |
| 209 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 210 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 211 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). |
| 212 | Providing,Supplying and applying of 2 MM Epoxy Flooring after necessary surface preparation. Surface preparation means the substrate should be sound and free from Dust,contamination such as paint splashes residue oil and grease. These should be removed by light mechanical grinding or scarifying. Grinding and Dust Collection of floor with Automatic Grinding Machine. and then applying 1MM thick self levelling Screed EP91 having Technical Parameters of Compressive Strength > 41 N/mm² (BS-6319) (P-2):1983),Tensile Strength > 16 N/mm² (BS-6319 (P-7)), Flexural Strength > 27 N/mm² (BS-6319) (P-3):1990) including one coat of Primer EP402 as per specification of approved Make, then Final Coat of Self Levelling Top Coat 1010N 1mm having Technical Parameters of Compressive Strength > 62 N/mm² (BS-6319 (P-2)), Tensile Strength >21 N/mm2 (BS-6319) (P-7)) ,Flexural Strength >24 N/mm² (BS-6319) (P-3)), Shore D >75 (7 days / +23°C) (ASTM D 2240) with approved RAL Shade Pigment. |
| 213 | Supply & fixing of flexible pastel conductive Esd range PVC sheet flooring in 2 mm thickness in the size of 2 X 20 mtr homogeneous with conductive backing polyvinylchloride marbled,impact sound reduction ISO-140-8,total weight 3200 g/m2,static electrical charge<2kv,electrical insulation to ground>50,good resistant to scratch,slip,fire ,chemical & does not favor in growth fungi & bacteria,diamond 10 coating for more durabality ,duly installed on smooth surface of self levelling compound with hot welding to make seamless & company recommended adhesive |
| 214 | Supply & fixing of flexible pvc sheet flooring in 2 mm thickness in the size of 2 mtr X 20 mtr use area classification 23/34/43 results from independent testing demonstrate that product inherently inhibits the growth of microbial strain MRSA. It shall be homogeneous in construction. The flooring shall incorporated a specially (PUR) to give polish free maintenance imported pvc vinyl flooring with total weight 28oo g/m2,dimensional stability EN-434, static electrical charge <2kv, impact sound reduction approx ISO 717-2, good resistant to scratch, slip, fire ,chemical & does not favor in growth fungi & bacteria, diamond 10 coating for more durabality, duly installed on smooth and hard surface of self levelling compound with company recommended adhesive and seamless joint. |
| 215 | Providing & Fixing of color/linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per Sqm , Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, stain resistant, thickness 4.3 mm and approximate weight of approx 1.8 k.g./sqm of roll form with acoustic sound impact 17dB. Flotex to be installed over cement based smooth level hard flooring. The carpet should be laid complete including SS edge profile at door opening |
| 216 | Providing & fixing 10.5 mm thick engineerwood flooring american exotic bruce 7 layer construction,top layer of wood veener 2mm ,plank size width 120 mm ,length 400-1200 mm,Lock & fold locking ,premium finish,micro bevel edges/ends with an underlayment made of natural colour foam,with accessories like end profile,transition profile,reducer ,etc.complete.The profiles are 100% matching. profile at door openings |
| 217 | Supply & fixing flexible Wallflex/walldesign PVC sheet wall cladding in 1 mm thickness in the size of 1.5 mtr X 20 mtr with polyurethane surface treatment testing results if inhibits the growth of MRSA in the wall with clean room certificatioin. Homogeneous vinyl wall covering (imported) with polyurethane shield .Classification EN-685 for wall only. Good resistant to chemical & fire ,anti fungi & bacterial growth, diamond 10 coating,class A in clean room test and available in various colour shade duly installed on smooth wall with company recommended adhesive and seamless |
| 218 | Providing and Fixing of Optra Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co- fficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. To ensure specification of tiles, Manufacturers Test Certificate is required having complete site address & duly signed by Manufacturer. |
| 219 | Providing and fixing of veenered panelling made of 12 mm commercial ply/MDF for even base duly fixed to wall on 1'X1.5\\" aluminium tubes framework using PVC plugs & MS screw on dry surface. Finished using 4 mm thick veener of approved make & grain duly fixed using wood adhesive as per drawing & design. |
| 220 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 221 | ROOFING WORK |
| 222 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 223 | In 75x75 mm deep chase |
| 224 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg I m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm)@60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. |
| 225 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush |
| 226 | finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 227 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 228 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 229 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. |
| 230 | With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.60) |
| 231 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) |
| 232 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece. |
| 233 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 234 | Providing corrugated G.S. sheet roofing including vertical I curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 235 | 1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 236 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. |
| 237 | 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 238 | FINISHING WORK |
| 239 | 12 mm cement plaster of mix : |
| 240 | 1:6 (1 cement: 6 coarse sand) |
| 241 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 242 | 1:6 (1 cement: 6 coarse sand) |
| 243 | 6 mm cement plaster of mix : |
| 244 | 1:3 (1 cement : 3 fine sand) |
| 245 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 246 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 247 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 248 | Two or more coats on new work |
| 249 | Finishing walls with textured exterior paint of required shade : |
| 250 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 251 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. |
| 252 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 253 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 254 | Two coats |
| 255 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 256 | Two or more coats on new work |
| 257 | Providing and fixing G.I. chicken wire mesh having wire of thickness 22 SWG and minimum aperture of 20mmx20mm of approved quality over the junction of R.C.C member and brick/AAC wall including fixing with U nails/screws 150 mm centre to centre in both direction before plastering etc. all complete as per the direction of Engineer-in-charge. |
| 258 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 259 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 260 | Neat cement punning. |
| 261 | ALUMINIUM WORK |
| 262 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 263 | For fixed portion |
| 264 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 265 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 266 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 267 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): |
| 268 | With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 269 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 |
| 270 | Upto 5 mm depth and 5 mm width |
| 271 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 272 | Upto 5mm depth and 5 mm width |
| 273 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 274 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 275 | WATER PROOFING WORK |
| 276 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 277 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. |
| 278 | (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compoundconforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. |
| 279 | (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: |
| 280 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 281 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 282 | 3 mm thick |
| 283 | Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : |
| 284 | using Rough Kota Stone |
| 285 | Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of selfhealing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the Engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage. |
| 286 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. |
| 287 | For vertical surface two coats @ 0.70 kg per sqm per coat |
| 288 | For horizontal surface one coat @1.10 kg per sqm. |
| 289 | Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : |
| 290 | Dumb bell with central bulb (180 mm wide, 8 mm thick) |
| 291 | SUB HEAD-14:- (RAIN WATER HARVESTING & TUBEWELLS) |
| 292 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. |
| 293 | All Type of Soil |
| 294 | 300mm dia |
| 295 | Rocky strata including Boulders |
| 296 | 400 mm dia |
| 297 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. |
| 298 | All Type of Soil |
| 299 | 300mm dia |
| 300 | Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. |
| 301 | 150 mm nominal size dia |
| 302 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. |
| 303 | 150 mm nominal size dia |
| 304 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 305 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. |
| 306 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. |
| 307 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. |
| 308 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed,measuring yield of well by “V” notch method or any other approved method,measuring static level & draw down etc. by step draw down method,collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 309 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts if required size complete. |
| 310 | 150 mm clamp |
| 311 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). |
| 312 | 150 mm nominal size dia |
| 313 | STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL |
| 314 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. |
| 315 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: |
| 316 | (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass |
| 317 | (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, roviding suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all nsamples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. |
| 318 | Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places. Note:- 2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories (1) Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr (2) Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.(3) Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml (4) Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm (5) Seismic Movement Test (upto 30 mm) as per AAMA501.4-09 testing method for Qualitative test. Tests to be conducted on site. (6) Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml |
| 319 | Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.25.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. |
| 320 | (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. |
| 321 | Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. |
| 322 | Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by awet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. |
| 323 | Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. |
| 324 | For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. |
| 325 | TOTAL WATER PROOFING WORK AMOUNT |
| 326 | MISCELLANEOUS WORK |
| 327 | SS Glass Railing : Fabrication, Supply & Installation of straight area only top mounted SS304 grade satin finished railing for desired area made by using SS top rail dia 50X1.5mm thk. Mounted on SS baluster made of SS round tube baluster of dia 50X1.5 mm thick with SS modular neck to hold the top rail. The total height of the installed rail including top rail will be 1000 mm from balustrade base. Further the baluster will be mounted on dia 100X6 mm thick SS 304 grade base plate fixed on the RCC floor with 3 nos. of M8X90 mm long GI stud anchors with SS nuts caps. The baluster will hold 8 mm thk. toughened glass connected to the baluster with the help of modular glamps clamps. The average specing of baluster will be 1000mm. The railing will include all accessories for top rail joints. All material need to be in SS 304 grade with stin finish only. |
| 328 | Un-Insulated automatic sliding glazed fire doorProviding and fixing of fire rated automatic sliding door FSD 120 (E120) with approved make operator ES 200 STD - Type F, as per IS16947 / IS/ISO 834-1 for stability and integrity. Pressed galvanized steel confirming to IS 277 with the following specification. Tested doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Automatic glazed sliding door shall be tested for maximum rating of 120mins as a complete assembly. Assesment reports shall be provided for side partitions from reputed international lab. |
| 329 | Frames and side partitions shall be single rebate frame profile of size 125 x 55mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Sliding door leaf shall be fully glazed with minimum 60 x 85mm profile step box section for taking glass element with minimum 1.2mm (18guage) minimum thick galvanised steel sheet. The glass should fire rated minimum 10mm thick, non-wired borosilicate for 120mins stability, integrity with light transmission of minimum 92% as per EN1363 and EN1364. Glass shall have a impact resistance of 1C1 as per EN 12600. Glass shall be held in position with clip on beading and concealed fastners. The operator shall be type tested for fire rating with ES 200 Std - Type F, compliant with European standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested for 1 Million Cycle of operation in accordance with low voltage guidelines of IEC /EN 60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards & also compliance with ASR A 1.7:2009. SS hinges to connect the main profile with cover profile. The profile finish should be silver anodized or black anodised with operator dimensions (H x D) not exceeding 150 x 180 mm. Activators - approved make 2Nos. Nemo combination sensor – (Motion and safety in single radar), Electro Mechanical Lock for Fail safe / Fail Secure, Program Switch with Knob, Inbuilt battery pack. The weight carrying capacity per panel is 2 X 160 Kgs for double sliding doors. The system shall have constant power supply 230V+ 5%, 50Hz, AC. Supports and studs required for mounting the system from top shall be included as per site condition (cost of which will be paid extra) |
| 330 | The system fixed to brick wall at the corner from finished floor level. Adjustable end cap. High impact vinyl acrylic Snap-On matt finished. The corner guard must be 50 mm * 50 mm, as specified by the client in size with aluminium retainer and rigid vinyl, must have 1.5 mm thick aluminium retainer, must have 2 mm thick scratch and stain resistance rigid vinyl cover, should be coated with antifungal and antibacterial chemical. the system shall be designed to withstand impact. making it ideal for areas like high traffic corridors and corners. the vinyl cover should be fire retardant according to the norms and should have test certificates of that. it must be according to ROHS compliances. The material should come the ROHS certification from govt. approved lab. texture to provide an anti-slip surface, it should have adjustable end cap. aluminium retainer should be in mill finish and fabricated from 6063-T5 alloy. |
| 331 | The system fixed to brick wall at 900mm centre high from finished floor level comprising continuous aluminium rail retainer, 2 impact absorbing strip, end cap and high impact vinyl acrylic Snap-On textured surface cover. The wall guard must be 152mm wide, as specified by the client , must have 1.5 mm thick aluminium retainer, must have 2 mm thick scratch and stain resistance rigid vinyl cover, should be coated with antifungal and antibacterial chemical. the system shall be designed to withstand impact and provides a cushioned surface with its integrated rubberized absorber, making it ideal for areas like high traffic corridors, loading bays and light cargo lifts. The vinyl cover should be fire retardant according to the norms and should have test certificates of that. it must be according to ROHS compliances. The material should come the ROHS certification from govt approved lab. texture to provide an anti-slip surface, it should have adjustable end cap, corner joint and adaptor plate. aluminium retainer should be in mill finish and fabricated from 6063-T5 alloy. |
| 332 | Providing and fixing G.I. chicken wire mesh having wire of thickness 22 SWG and minimum aperture of 20mmx20mm of approved quality over the junction of R.C.C member and brick/AAC wall including fixing with U nails/screws 150 mm centre to centre in both direction before plastering etc. all complete as per the direction of Engineer-in-charge. |
| 333 | Supply and Installation of multicell, multi-layered polycarbonate standing seam system, a complete assembly of co extruded UV protected polycarbonate panels incorporated along with all fixing accessories into a complete system. Co-extruded UV protected polycarbonate panel system of min 22mm thick of 600-1200mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design or commonly called as X structure for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.7 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineer in charge. |
| 334 | TOTAL MISCELLANEOUS WORK AMOUNT |
| 335 | ROAD WORK |
| 336 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 337 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 338 | With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 339 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 340 | Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineerin- charge. |
| 341 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. |
| 342 | Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer |
| 343 | Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. |
| 344 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) |
| 345 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. |
| 346 | Using grade 'A' sealing compound conforming to IS: 1834. |
| 347 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. |
| 348 | New work (Two or more coats) |
| 349 | Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for shape of bell mouth, including plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed surface of the slab & bell mouth including centring, shuttering & neat cement punning inside the bell mouth etc. all complete. |
| 350 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. |
| 351 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, onsolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 352 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 353 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 354 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineerin-Charge.(Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). |
| 355 | Sub-Head-1:- (SANITARY INSTALLATIONS ) |
| 356 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, auto closing type 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(Note- Flow rate Max 4 LPM) |
| 357 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps auto closing type |
| 358 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wallswherever required:- (Note- Flow rate Max 4 LPM) |
| 359 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Note- Flow rate Max 4 LPM) |
| 360 | White viterous china surgeon type wash basin of size 660X460 mm with a pair of 15 mm CP brass pillar taps with elbow including operated levers (Note- Flow rate Max 4 LPM) |
| 361 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink asper IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making goodthe walls wherever required : |
| 362 | Kitchen sink without drain board |
| 363 | 610x510 mm bowl depth 200 mm |
| 364 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : |
| 365 | Size 450x300x150 mm (Lab sink) |
| 366 | Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge. |
| 367 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 368 | Flexible pipe |
| 369 | 40 mm dia |
| 370 | Providing and fixing in posotion of 25 diameter mosquito proof coupling as per approved municipal design |
| 371 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 372 | Providing and fixing toilet paper holder : |
| 373 | C.P. brass |
| 374 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 375 | 150 mm dia |
| 376 | Providing and fixing plain bend of required degree: |
| 377 | 150mm Sand cast iron S&S as per IS : 15905 |
| 378 | Providing and fixing single equal plain junction of required degree. |
| 379 | 150 x 150 x 150mm Sand cast iron S&S as per IS : 15905 |
| 380 | Providing and fixing terminal guard |
| 381 | 150mm Sand cast iron S&S as per IS : 15905 |
| 382 | Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter: |
| 383 | 150mm |
| 384 | Supply, Installation, Testing and Commissioning of soil, waste, rain water and vent pipe mineral filled 3 layered (PP/PP mineral filled/PP) Polypropylene low noise pipes and fittings of min. density 1.9 gm/cm3, pipes of 40 mm – 200 mm including all fittings & accessories such as coupler, elbow, tee, Y, reducer, access door, end cap, cowls, etc. for soil, waste and vent purpose in floors, ceiling suspended, or on walls, with leak proof joints etc. Joining pipes & fittings with rubber sealing rings as per approved manufacturer recommendation. Wall chasing, holes, supporting, clamping, covering back with chicken mesh & plaster and making the wall good as per approved shop drawing. Sound level of less than 19 to 22 dB(A) at flow rate of 4 L/s according to DIN 4109. Should have D-s2, d0 fire classification as per EN 13501 or B2 as per DIN 4102, short term hot water resistance upto 95°c and long term upto 90°c, chemical resistance of pH 2 to pH12 - Should have IAPMO and Green certification. (Make - GF+, Astral, Huliot, Osterndrop) |
| 385 | 160 mm dia pipe |
| 386 | 110 mm dia pipe |
| 387 | 50 mm dia pipe |
| 388 | Providing and fixing 100 mm dia PP inlet fitting/ Extension Piece with 2 or 3 inlets of 32 to 50 mmdia, fixed to uPVC trap with Sealent and set in cement concrete as per drawing complete. |
| 389 | Providing and fixing PP trap of self cleansing design with grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 390 | Providing and fixing soil, waste and vent pipes : |
| 391 | 100mm dia pipe |
| 392 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 393 | 75mm dia pipe |
| 394 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 395 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
| 396 | For 100 mm dia pipe |
| 397 | For 75 mm dia pipe |
| 398 | Providing and fixing bend of required degree withh access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 399 | 100mm dia pipe |
| 400 | HublessCentrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 401 | 75mm dia pipe |
| 402 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 403 | Providing and fixing plain bend of required degree. |
| 404 | 100mm dia pipe |
| 405 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 406 | 75mm dia pipe |
| 407 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 408 | Providing and fixing double equal plain junction of required degree |
| 409 | 100x100x100x100 |
| 410 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 411 | 75x75x75x75 |
| 412 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 413 | Providing and fixing single equal plain junction of required degree |
| 414 | 100x100x75x75 |
| 415 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 416 | 75x75x75x75 |
| 417 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 418 | Providing and fixing double unequal plain junction of required degree |
| 419 | 100x100x75X75 |
| 420 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 421 | Providing and fixings single unequal plain junction of required degree |
| 422 | 100x100x75 |
| 423 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 424 | Providing and fixing terminal guard |
| 425 | 100mm dia |
| 426 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 427 | Providing and Fixing shielded coupling for hubless centrifugl cast iron pipe |
| 428 | 100 mm dia pipe |
| 429 | SS 304 grade coupling with EPDM rubber gasket |
| 430 | 75mm dia pipe |
| 431 | SS 304 grade coupling with EPDM rubber gasket |
| 432 | Providing and fixing MS Stays and clamps for hubless centrifugl cast iron pipe of diameter |
| 433 | 100 mm dia |
| 434 | 75 mm dia |
| 435 | Providing and Fixing floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. |
| 436 | 100 mm inlet and 100 mm outlet |
| 437 | Hubless Centrifugally cast (spun) iron pipes epoxy coated inside and out side IS : 15905 |
| 438 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 439 | White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 440 | Providing and fixing liquid soap dispenser with Glass bottel (Make Jaquar Model no-ACN-1135N |
| 441 | Providing and fixing towel ring round with round Flange (Make Jaquar Model no-ACN-1121BN |
| 442 | Providing and fixing towel rail 600mm Long (Make Jaquar Model no-ACN-1111NM |
| 443 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre, including seat cover, and cistern fittings, nuts, bolts and gasket etc complete |
| 444 | Providing and fixing white vitreous china battery/electrical based infrared sensoroperated urinal of approx. size 610 x 390 x 370 mm having pre &post flushing with water (250 ml & 500 ml consumption), havingwater inlet from back side, including fixing to wall with suitablebrackets all as per manufacturers specification and direction ofEngineer-in-charge. |
| 445 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 446 | Providing , Fixing , testing and commissioning of CP Brass Shower Mixer of approved make with provision of overhead shower with 120 mm long bend pipe, in built spout, spout/shower selector with wall flange complete with all accessories as required and making good the walls wherever required complete in all respect as directed by Engineer-in-charge. (Make Jaquar Model no-CQT- 23273UPR or equivalent as per list of make)Note:- Flow rate max 6LPM |
| 447 | Providing , Fixing, testing and commissioning of CP Brass 120 mm long Shower Arm of approved make with wall flange and pressure adjustable Shower Rose complete with all accessories as required and making good the walls wherever required as directed by Engineer-in-charge. (Make Jaquar Model no-SHA-487 or equivalent as per list of make) |
| 448 | Providing,Fixing satin finish stainless steel AISI 316 grade wall mounted twin coat hook on door complete in all respect as directed by Engineer-in-charge. (Make Jaquar Model no-ACN-1161N or equivalent as per list of make) |
| 449 | Providing & fixing of CP brass soap dish of approved design with fittings etc complete as directed by Engineer-in-charge. (Make Jaquar Model no-ACN-1131N or equivalent as per list of make) |
| 450 | Providing and fixing of fully automatic \\"NO TOUCH\\" durable & shock proof hand drier of approved make & manufacture suitable to operate on 220 volts, single phase 50 hz, A.C. power supply, 1500 Watt and directly plugged to power point complete in ABS plastic body having drying time 20-30 seconds complete as per direction of Engineer in Charge. (Make Jaquar Model no-HDR- WHT- M04A or equivalent as per list of make) |
| 451 | Providing,fixing,testing and commissioning Hand Shower (Health Faucet) Max flow rate is 4 LPM with 8mm Dia,1.2 Metre Long Flexible Tube & Wall Hook of approved make and manufacture complete as per direction of Engineer in Charge. (Make Jaquar Model no-ALD-573 or equivalent as per list of make) |
| 452 | Providing and fixing of handicapped toilet,Grab bar compelete as per direction of engineer-in-charge (Make Jaquar Model no-AHS-CHR- 1503 450M Long or equivalent as per list of make) |
| 453 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete |
| 454 | Providing and fixing CP brass bib cock |
| 455 | Provding and fixing CP brass long body bib cock of approved quality conforming to IS Standards and weighing not less than 690 gms |
| 456 | Providing and fixing Stainless Steel Floor Trap / Floor Drain Grating 143x143x5 mm thick Screwable with SS Fixed Frame 150 x150 mm size as per approved make & model complete in all respect as directed by Engineer-in- charge |
| 457 | Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe complete in all respect as directed by Engineer-in-charge. |
| 458 | Providing and fixing CP Brass floor cleanout plug / Clean out plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet including drip seal joint complete in all respect as directed by Engineer-in-charge. |
| 459 | Providing and fixing multi-floor trap fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes and sockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as per standard drawing complete in all respect as directed by Engineer-incharge. |
| 460 | Providing and fixing low flow type two way bib tap as per approved make complete in all respect as per engineer in the charge (Make ARI-39041 Jaquar or equivalent as directed by EIC) |
| 461 | Providing and fixing CP brass waste coupling(Make Jaquar Model no-ALD-705 equivalent as per list of make) |
| 462 | Supply, Installation, testing and commissioning of drinking water coolers with 50LHP RO : Storage Capacity 80 Liters No of Faucets 2 for bottle filler, Nominal Cooling Capacity 80L/hr Faster cooling, Silent operation, Nationwide service, Stainless Steel body, Stainless Steel tank, Easy controls, Speedy drainage with drain board complete set. |
| 463 | Supply, installation, testing and commissioning of horizontal type storage hot water heater within-built pressure relief valve, rated for inlet water pressure upto 6 bar complet in all respects including inlet, oulet connections, fixing bolts etc. and testing complete. (MakE - Jaquar ) |
| 464 | Capacity 25 litres |
| 465 | Providing and fixing of white vitreous china bed pan sink with p trap, size 600x450mm with 10 litre CI high level flushing cistern flush pipe, CI/MS bracket painitng with 3 coats of white paint complete with accessories, CP brass fittings with vertical jet horizontal spray complete with control cocks. (MakE - Vijay Healt ). |
| 466 | Providing & fixing fully automatic photoelectric cell operated No-touch urinal flushing system (Battery/electrical operated vandal proof- twin flush (pre & post use) operation), flush mounted sensors of jaquar make model: SNR-STL-51087 or equivalent to the satisfaction of engineer-in-charge complete in all respects in fully operational conditions (MakE - Jaquar Model SNR-STL-51083 ) |
| 467 | SUB HEAD-2:- (WATER SUPPLY) |
| 468 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 469 | Concealed work, including cutting chases and making good the walls etc. |
| 470 | 15 mm nominal outer dia Pipes |
| 471 | 20 mm nominal outer dia Pipes |
| 472 | 25 mm nominal outer dia Pipes |
| 473 | 32 mm nominal outer dia Pipes |
| 474 | Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall |
| 475 | 15 mm nominal bore |
| 476 | 20 mm nominal bore |
| 477 | 25 mm nominal bore |
| 478 | 32 mm nominal bore |
| 479 | 40 mm nominal bore |
| 480 | 50 mm nominal bore |
| 481 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. |
| 482 | External Work |
| 483 | 25mm nominal nominal bore |
| 484 | 32 mm dia nominal bore |
| 485 | 40 mm dia nominal bore |
| 486 | 50mm nominal nominal bore |
| 487 | 65 mm nominal nominal bore |
| 488 | 80 mm nominal nominal bore |
| 489 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 490 | 25 to 40 mm nominal bore |
| 491 | 50 to 80 mm nominal bore |
| 492 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 493 | 25mm nominal bore |
| 494 | 32mm nominal bore |
| 495 | 40mm nominal bore |
| 496 | 50mm nominal bore |
| 497 | 65mm nominal bore |
| 498 | 80 mm nominal outer dia C class Pipes |
| 499 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 500 | 15 mm nominal bore |
| 501 | Providing and laying S&S centrifugally cast (spun) iron pipes (ClassLA) conforming to IS - 1536 |
| 502 | 150 dia |
| 503 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paidseparately |
| 504 | Class-I |
| 505 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 506 | With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 507 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 508 | With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 509 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : |
| 510 | With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 511 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 512 | 15mm diameter pipe |
| 513 | 20mm diameter pipe |
| 514 | 25mm diameter pipe |
| 515 | 32mm diameter pipe |
| 516 | 40mm diameter pipe |
| 517 | 50mm diameter pipe |
| 518 | Painting of G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. |
| 519 | a) 32 mm dia |
| 520 | b) 40 mm dia |
| 521 | c) 50 mm dia |
| 522 | 65mm diameter pipe |
| 523 | 80mm diameter pipe |
| 524 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 525 | a) 15 mm nominal bore |
| 526 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : |
| 527 | 50 mm diameter pipe |
| 528 | 65 mm diameter pipe |
| 529 | 80 mm diameter pipe |
| 530 | Providing & fixing enclosed type water meter ( bulk type ) conforming to IS : 2373 and tested by municipal board , Borewell, STP recycled water outlet,captured Rain water ,Irrigation ,cooling tower ,WTP ,ETP complete with nuts , bolts , rubber insertion etc . ( The tail piece if required will be paid saperately ) |
| 531 | 80 mm dia nominal bore |
| 532 | 100 mm dia nominal bore |
| 533 | Providing, Fixing, Testing & Commissioning of nitrile rubber insulation on hot water supply pipes. of approved make complete in all respect as directed by Engineer-in-charge. |
| 534 | 15mm dia (13 mm thickness) |
| 535 | 20mm dia (13 mm thickness) |
| 536 | 25mm dia (13 mm thickness) |
| 537 | 32mm dia (13 mm thickness) |
| 538 | 40mm dia (19 mm thickness) |
| 539 | 50mm dia (19 mm thickness) |
| 540 | Providing and fixing of Garden Hydrant outlet consisting 1 no. 25mm dia Ball valve(Brass) of approved quality for connecting rubber hose, pipes and fittings complete as required |
| 541 | Providing and fixing Stainless Steel pipes confirming to corrosion resistant ausenitic steel, chrome-nickel- molybdenum X2CrNiMO17-12-2, no.14401 acordance to DIN-EN10088, according to AISI 316L with press type fitings with V profile for Hot and cold-water supply, capable to withstand temperature upto 135C and 16 bar pressure with length of 6 meters in accordance with dvgw regulation GW 41 such as tees, coupling, elbow, male adapter, connectors etc with Black grooved O-rings of EPDM material can withstand temperature upto 135C including suitable connection as per site requirement. Direct contact of stainless steel pipes and fittings to galvanized iron should be vaoided by inserting approved typeof filler material as per project managers/consultant requirement. Flanges, clamps with hanger as a spacing of 2 m centre to centre min or as required, necessary adapters for GI/copper and CP fittings, jointing, sundries, cutting holes in walls/floors/slabs & making good complete. ( For Domestic hot and cold water supply as well for external water supply covered with insulation ). - Make-VIEGA |
| 542 | 15 mm nominal outer dia pipes |
| 543 | 22 mm nominal outer dia pipes |
| 544 | 28 mm nominal outer dia pipes |
| 545 | 35 mm nominal outer dia pipes |
| 546 | 42 mm nominal outer dia pipes |
| 547 | 54 mm nominal outer dia pipes |
| 548 | 76.1 mm nominal outer dia pipes |
| 549 | 88.9 mm nominal outer dia pipes |
| 550 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: |
| 551 | 100 mm diameter |
| 552 | 150 mm diameter |
| 553 | 200 mm diameter |
| 554 | 250 mm diameter |
| 555 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: |
| 556 | 100mm dia SW pipe |
| 557 | 150mm dia SW pipe |
| 558 | 200mm dia SW pipe |
| 559 | 250mm dia SW pipe |
| 560 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : |
| 561 | 150 x 100mm size P-type |
| 562 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 563 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : |
| 564 | 150mm dia RCC pipe |
| 565 | 250mm dia RCC pipe |
| 566 | 300mm dia RCC pipe |
| 567 | 450mm dia RCC pipe |
| 568 | Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete |
| 569 | 450mm dia RCC pipe |
| 570 | 600mm dia RCC pipe |
| 571 | Constructing brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) with RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. |
| 572 | Inside size 90 x 80 cm and 45 cm deep including SFRC manhole cover and frame of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter. |
| 573 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 574 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : |
| 575 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 576 | Extra for depth for manholes: |
| 577 | Size 90 x 80 cm |
| 578 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 579 | Size 120x90 cm |
| 580 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 581 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : |
| 582 | 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): |
| 583 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 584 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m |
| 585 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 586 | Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : |
| 587 | 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : |
| 588 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 589 | Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m : |
| 590 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 591 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 592 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 593 | LD - 2.5 |
| 594 | Rectangular shape 600x450 mm internal dimensions |
| 595 | M D - 10 |
| 596 | Circular shape 500 mm internal diameter |
| 597 | Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design. |
| 598 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 599 | Constructing brick masonry water tight grease trap (with three chambers , each of 0.4 M X 0.6 M in plan) with 7.5 class designation bricks in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) earth work, excavation in all kinds of soil, foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including constructing baffle wall, stainless steel angles on corners, stainless steel perforated plates with stainless steel lifting handles in each chamber, inlet and outlet fittings in UPVC, double seal C.I. covers complete in all respect as directed by Engineer-in-charge. |
| 600 | Inside size 2.0m x 1.5m and 1.0m deep including two nos. 60x60 cm. C.I. Cover and frame (double seal weight of cover and frame not less than 75 kg) |
| 601 | PUMPS |
| 602 | Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : |
| 603 | Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. |
| 604 | Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 605 | M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 606 | Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 607 | 2280 lpm at 88 m Head - For Hydrant and Sprinkler |
| 608 | 2280 lpm at 70 m Head - For Fire Curtain |
| 609 | Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. |
| 610 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Drive Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. |
| 611 | Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. |
| 612 | M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 613 | Suitable cement concrete foundation duly plastered with anti vibration pads. |
| 614 | 2280 lpm at 88 m Head |
| 615 | Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point. |
| 616 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump). |
| 617 | Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. |
| 618 | Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. |
| 619 | M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. |
| 620 | Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 621 | 180 lpm at 88 m Head |
| 622 | (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 623 | (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. |
| 624 | (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. |
| 625 | (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 626 | (e) Suitable cement concrete foundation duly plastered and with anti vibration pads |
| 627 | 900 lpm at 35 m Head |
| 628 | CONTROL PANELS |
| 629 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : |
| 630 | Incomings |
| 631 | 600A, 50kA 4 Pole MCCB, Ics=100% Icu rating |
| 632 | Digital Voltmeter 0-500V with selector switch |
| 633 | Ammeter (0-600 A) with selector swtich & CTs etc. |
| 634 | LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps |
| 635 | Set of Copper Bus Bar 500A |
| 636 | Outgoings |
| 637 | (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) |
| 638 | Main Fire Pump |
| 639 | 250 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set |
| 640 | Jockey Pump |
| 641 | 125 A, 50kA TPN MCCB, Ics=100% Icu, with suitable 10 HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set |
| 642 | Diesel Engine Control |
| 643 | Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons,start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indicationBattery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications. |
| 644 | System Controller |
| 645 | Designing, supply, installation, testing & commissioning of system controller to control operation of main electric fire pump, diesel pump, pressurization pump, terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. |
| 646 | Pressurisation Pump and Terrace Pump Control Panel |
| 647 | 63 Amps. TP & N SFC with HRC fuses |
| 648 | Voltmeter (0-500 Volt) with selector switch. |
| 649 | Ammeter (0-60 Amps.) with selector switch & CTs. |
| 650 | Set of 3 phase indication lamp |
| 651 | Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation. |
| 652 | Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc. |
| 653 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. |
| 654 | 4 x 25 sqmm ( 28 mm ) |
| 655 | 3.5 x 50 sqmm ( 35 mm ) |
| 656 | 3 X 10 sq. mm (22mm) |
| 657 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. |
| 658 | 150 mm width x 50mm depth x 1.6 mm thickness. |
| 659 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 660 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 661 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 662 | Providing, fixing, tetsing & commissioning of annunciator panel for flow control switches, providing audio /visual indication of actuation of automatic sprinkler system for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system. The panel should have:-a) Fault indication for each zoneb) Indication of zone firec) Fire/Fault hooterd) Alarm Panel for fire/faulte) Battery for emergencyf) Battery Chargerg) mains supply and shall cater for minimum 14 zones working and 6 zones spare |
| 663 | Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred. |
| 664 | 4 core, 25 sq.mm. Aluminium Armoured |
| 665 | 3.5 core, 50 sq.mm. Aluminium Armoured |
| 666 | 3 core, 10 sq.mm. Aluminium Armoured |
| 667 | Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge. |
| 668 | PIPES & ACCESSORIES |
| 669 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground ) |
| 670 | 200 mm. Dia (wall thikness 6.3mm) |
| 671 | 150 mm. Dia |
| 672 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor) |
| 673 | 25 mm dia |
| 674 | 32 mm dia |
| 675 | 40 mm dia |
| 676 | 50 mm dia |
| 677 | 65 mm dia |
| 678 | 80 mm dia |
| 679 | 100 mm dia |
| 680 | 150 mm dia |
| 681 | 200 mm dia (wall thickness 6.3 mm) |
| 682 | 250 mm dia (wall thickness 6.3 mm) |
| 683 | 300 mm dia (wall thickness 7.0 mm) |
| 684 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 685 | Single headed Stainless steel |
| 686 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 687 | Single headed Stainless steel |
| 688 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 689 | 50 mm dia |
| 690 | 65 mm dia |
| 691 | 80 mm dia |
| 692 | 100 mm dia |
| 693 | 150 mm dia |
| 694 | 200 mm dia |
| 695 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 696 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 697 | 65 mm dia |
| 698 | 80 mm dia |
| 699 | 100 mm dia |
| 700 | 150 mm dia |
| 701 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 702 | 150 mm dia |
| 703 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 704 | Stainless Steel (Grade 304) |
| 705 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. |
| 706 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 707 | 20 mm nominal internal dia gun metal globe valve & nozzle. |
| 708 | Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 709 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 710 | Stainless Steel (Grade 304) |
| 711 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 712 | 2 way-100 mm dia M.S. Pipe. |
| 713 | 4 way - 150 mm dia M.S. Pipe. |
| 714 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 715 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : |
| 716 | Pendent Sprinkler |
| 717 | Upright Sprinkler |
| 718 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. |
| 719 | 150mm dia |
| 720 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : |
| 721 | 150mm dia |
| 722 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 sidebrackets, center bracket, stockbar of following sizes complete as required. |
| 723 | 1200mm |
| 724 | 1500mm |
| 725 | Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test & alarm, drip & drain valve with water motor gong complete as required |
| 726 | 100 mm dia |
| 727 | Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required |
| 728 | Providing, installation, testing & commissioning of electric release trim assembly for deluge valve with two way solenoid valve, weather proof operation on 24 volts DC supply complete as required |
| 729 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 730 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 731 | Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete. |
| 732 | Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & \\"FIRE HOSE\\" written on front.(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE) |
| 733 | Providing and fixing hose cabinet of size 700mmX600mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted \\"FIRE\\" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge. |
| 734 | Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. |
| 735 | 25 mm Dia |
| 736 | Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass connection to drain pipe/riser. |
| 737 | Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves. |
| 738 | 150 mm dia |
| 739 | Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below: |
| 740 | Concealed work, including cutting chases and making good the walls etc. |
| 741 | Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge. |
| 742 | Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge. |
| 743 | Water CO2 type of 9 lit.Fire Extinguisher with Gun metal cap and nozzlecomplete in all respects including wall suspension bracket and conforming to IS: 15683. |
| 744 | Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:910 . |
| 745 | Providing, fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285. |
| 746 | Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with imported Novec 1230 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions. |
| 747 | Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. |
| 748 | Supply, Installation, Testing and Commissioning In-line vertical multistage centrifugal pump set (for clear water) SS-304 casing, SS-304 impeller, SS-316 shaft, CI base with coating, complete directly coupled with TEFC induction motor of class \\"F\\" insulation & efficiency class IE-3, 2900 RPM, suitable for operation on 415 volts ±10%, 3 phase, 50 Hz, A.C. supply, mechanical seal, pressure gauges with gunmetal isolation cocks, vibration elimination pads etc. mounted on a MS base frame bolted to cement concrete foundation etc. complete in all respects and as per technical specification for following capacities: |
| 749 | Filter Feed Pump (Location - Plumbing Plant Room ) |
| 750 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 751 | Capacity : 330 lpm |
| 752 | Head : 35m |
| 753 | Make Up Water Supply Pump to STP (Location - Plumbing Plant Room ) |
| 754 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 755 | Capacity : 450 lpm |
| 756 | Head : 50m |
| 757 | Irrigation Water Supply Pump (Location - STP Plant Room ) |
| 758 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 759 | Capacity : 270 lpm |
| 760 | Head : 60m |
| 761 | (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class \\"F\\" insulation & efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. |
| 762 | (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 3 times the vessel operating pressure and prototype cycle tested for 80,000 cycles with charging connections to discharge pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as required. |
| 763 | (iii) Microprocessor based multi pump contoller/panel with graphical display and variable frequency drive (VFD) mounted inside a panel complete with pressure sensor transmitter. The graphical display capable to show number of pumps running & also communicate with other controllers following with open protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. The panel should also have provision for manual / automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as required. |
| 764 | (v) Necessary foundationing bolts, vibration elimination pads etc complete as required. |
| 765 | Domestic Water Supply Pumps for filling of overhead tanks at building terrace level. (Location - Plumbing Plant Room ) |
| 766 | Duty of each pump suitable for:- |
| 767 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 768 | Capacity : 330 lpm |
| 769 | Head : 70m |
| 770 | Note:-1 set consists of 2 nos. of pumps (1 Working + 1Standby) |
| 771 | Flushing Water Supply Pumps for filling of overhead tanks at building terrace level. (Location - STP Plant Room ) |
| 772 | Duty of each pump suitable for:- |
| 773 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 774 | Capacity : 160 lpm |
| 775 | Head : 70m |
| 776 | Note:-1 set consists of 2 nos. of pumps (1 Working + 1Standby) |
| 777 | Supply, Installation, Testing and Commissioning of compact packaged type skid mounted, self contained fixed speed drive hydro pneumatic system complete as per the technical specification complete as required:- |
| 778 | (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class \\"F\\" insulation & efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. |
| 779 | (ii) Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 3 times the vessel operating pressure and prototype cycle tested for 80,000 cycles with charging connections to discharge pipe line with necessary flanges, gaskets, isolating valve, nuts/ bolts etc. with suitable foundation bolts etc complete as required. |
| 780 | (iii) Microprocessor based multi pump contoller/panel with graphical display and variable frequency drive (VFD) mounted inside a panel complete with pressure sensor transmitter. The graphical display capable to show number of pumps running & also communicate with other controllers following with open protocol through RS485 port. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. The panel should also have provision for manual / automatic alternate (cyclic) operation of pumps, ON/OFF switch complete as required. |
| 781 | (v) Necessary foundationing bolts, vibration elimination pads etc complete as required. |
| 782 | Soft Water Supply Pumps (Location - STP Plant Room ) |
| 783 | Duty of each pump suitable for:- |
| 784 | No. of Pumps: 2 (1 Working + 1 Stand by ) |
| 785 | Capacity : 300 lpm |
| 786 | Head : 70m |
| 787 | Note:-1 set consists of 2 nos. of pumps (1 Working + 1Standby) |
| 788 | MULTIGRADE PRESSURE SAND FILTER: (For Domestic Water) |
| 789 | Location - Plumbing Plant Room |
| 790 | Supply, installation, testing & commissioning of vertical self supporting multi grade pressure filter (MGF) (Dual media filter) fabricated from MS sheet as per IS Code, pressure gauges at inlet & outlet, sample cock, air vent valve with piping, GI face piping distribution pipe with diffuser on top, CI butterfly valves and all accessories, with initial charge of filter media for filter, painting inside with food grade epoxy paint and outside with two coat of red oxide primer and two or more coat of synthetic enamel paint complete with bypass arrangement including piping and valves (3 Nos.) of required size. |
| 791 | Capacity/Flow rate : 16.5 M3/hr |
| 792 | Filtration rate/velocity : 17.5 M3/M2/hr |
| 793 | Max. operating pressure : 3.5 kg/Sq.cm |
| 794 | Test pressure : 5.5 kg/Sq.cm |
| 795 | Suggested diameter : 1200 mm |
| 796 | ACTIVATED CARBON FILTER: (For Domestic Water) |
| 797 | Location - Plumbing Plant Room |
| 798 | Supply, installation, testing & commissioning vertical self supporting Activated Carbon Filter (ACF) fabricated from M.S. Sheet as per IS Code, pressure gauge at inlet & outlet, sample cock, GI face piping, C.I. Butterfly valve and all accessories, air vent valve with piping, with initial charge of filter media for activated carbon filter, painting inside with epoxy paint and outside with two coat of synthetic enamel paint complete with bypass arrangement including piping, CI Valves (3 Nos.) of required size. |
| 799 | Capacity/Flow rate : 16.5 M3/hr |
| 800 | Filtration rate/velocity : 17.5 M3/M2/hr |
| 801 | Max. operating pressure : 3.5 kg/Sq.cm |
| 802 | Test pressure : 5.5 kg/Sq.cm |
| 803 | Suggested diameter : 1200 mm |
| 804 | Chlorinator |
| 805 | Supply, Installation, Testing and Commissioning chemical dozing system consisting of 2 nos. electronic dosing pumps (1W+1S) with all accessories, suitable to doze chemical solution up to 1 ppm doze of Sodium Hypo-chloride solution to a filtered water flow of required LPH against a pressure of 1.5 kg/cm2 complete with FRP moulded solution holding tank of min. 200 litre with all standard accessories & structural arrangement including suitable foundation bolts & other accessories etc. complete as per technical specifications as required. |
| 806 | Note:1 set consists of 2 nos. of pumps(1W+1S) |
| 807 | UV System |
| 808 | Supply, installing, testing & commissioning of Ultraviolet disinfection unit. The unit shall have over 99.9% bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 6000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometer with 4 -20 mA output. |
| 809 | The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with UV monitoring system. The UV Dosage should be > 60,000uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit. |
| 810 | Flow Rate : 330 LPM |
| 811 | Drainage Sump Pump |
| 812 | Supply, installation, testing and commissioning compact mono block dry motor sump pumps of suitable rating, with non-clog free flow open impeller, solid handling capacity at least 40 mm suitable for operation on 415 volts +10% , 3 Phase, 50Hz, A.C supply, speed 2900 RPM including oil chamber, guide wire for lifting & lowering of pump, G.I. galvanized lifting chain, complete. |
| 813 | The above pump sets must be supplied complete with following accessories. |
| 814 | GI Piping of 80mm dia for individual pump delivery line and 100mm dia for common delivery line, to be terminated outside the sump. |
| 815 | 80mm dia Butterfly valve.-- 2 Nos |
| 816 | 80 mm dia reflux valve.-- 2 Nos |
| 817 | Electrical switch panel with DOL starter having all necessary accessories & safety devices of standard specifications. Automatic built-up water level controller with necessary length of cable up to control panel. |
| 818 | No. of Pumps/set : 2nos. (1 W + 1 S) (for WTP plant room, CSSD, HVAC plant room pump) |
| 819 | Discharge - 230 LPM Each |
| 820 | Head - 15 Meters |
| 821 | Supplying, installing, testing & commissioning of R.O. Plant including filters, pumps, dosing units, RO supply pumps, control panel, piping and valves and 5,000 litres SS 304 stainless steel tank complete and Including all electrical panel and cabling works as per specifcation and drawings. For LAB & CSSD. |
| 822 | Feed Flow - 2000 LPH |
| 823 | Product Flow - 1200 LPH |
| 824 | Reject Flow - 800 LPH |
| 825 | Recovery - 60% |
| 826 | Mode of operation - Manual |
| 827 | Operating Pressure - 10 to 12 Kg/cm2 |
| 828 | Solar Water Heating System |
| 829 | Supply, Installation, Testing & Commissioning of Flat Plate collector having collector area should be min. 2 Sq, Mtr. (Collectror should be BIS & MNRE approved, based on thermo syphon solar water heating System suitable for Pressurized feed water comprising of Flat Plate collectors, internal system piping, insulated hot water storage tank with heat exchanger, valves on inlet & outlet, Y strainer temperature gauge, MS Angle frame etc. Details of each items used in system are mentioned below |
| 830 | 1 Lot of Inter-connected G.I. C-Class system piping as required dia. with fittings, insulated with 50 mm glasswool/rockwool insulation covered with chicken mesh & 24 SWG aluminum cladding to connect the collectors with hot water storage tank. |
| 831 | Providing and fixing a lot of Temperature Gauge, vent pipe, ball valve, NRV, CI/brass Y strainer, PT - 100 sensors with thermocople wire ,MS. Angle stand for hot water tank . |
| 832 | One No. Heat Exchanger cage type inbuild the hot water storage tank of SS 304 having surface area not less than 2.4 Sq. Mtr. |
| 833 | One No. Control Panel for electric heaters & recirculation pump having DTC with contractor, MCBs, and cycling timer for pump. |
| 834 | 60 Nos. Solar Flat Plate collector. - For Hospital Block |
| 835 | 60 Nos. Solar Flat Plate collector. - For RESIDENTIAL BLOCK_ |
| 836 | Design, Supply, installation, testing & commissioning of SS 316 horizontal hot water storage tank suitable for minimum 5 Kg /Sq.cm working pressure. Tank shall be provided with water flow meter at inlet (approved by department of weights and measures), inlet / outlet, overflow / drain connection with MH cover 6 mm thick SS tank, pressure relief valves, pressure gauge at inlet / outlet with isolation cock, thermometer at inlet / outlet. All the valves & accessories shall be suitable for an operating pressure of 5 Kg/sq.cm. |
| 837 | Tank shall be insulated as per specification, including 24 gauge aluminium cladding. Tank shall provided with 15 mm dia testing spout with valve (inlet temperature to hot water storage tank 60-65 deg.C). The flanges shall be machined from SS-316 sheets with dimensions confirming to ANSI, B 16.5 No. 150. The nozzles shall be SS pipes. (Tank shall be fabricated as per unfired pressure vessel code IS 2825-1969, IS 226 / IS 2062) complete with insulation, MS supporting structure with access ladder duly paint with red oxide primer & Synthetic Enamel Paint, face piping, valves etc complete.. |
| 838 | 5000 Litres Capacity |
| 839 | Supply, installation, testing & commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate complete with vibration isolators, isolating valve on suction and discharge, non return valve on discharge, pressure gauges with stop cock and dial type thermometer on suction or discharge. The pump shall have mechanical seal. The pump shall be SS casing, impeller, shaft and CI (Epoxy coated) base & EPDM Mechanical seal (suitable for hot water temperature up to 85 deg C.) including Valves, NRV, Strainers, Pressure Gauge, Thermometer & Cabling etc. complete in all respects. |
| 840 | Hot Water Return Pumps |
| 841 | Pump (2 Nos. 1W+1SB) |
| 842 | Flow - 1.0 LPS |
| 843 | Head - 20-22 mtrs |
| 844 | Electrical panel at plant room |
| 845 | Design, manufacture, supply, installation, testing and commissioning of the Plumbing panel, front operated, cubicle construction, Floor mounted type, fabricated out of 16 swg thick CRCA Sheet, Compartmentalized with hinged lockable doors, dust and vermin proof, Powder coated of approved shade, Cable alley, inter-connections, having Switch gear and accessories mounting, internal wiring, earth terminals, Top/ Bottom cable entry, numberings etc. suitable for operation of 415 volts, 3 phase, 50 Hz, AC Supply with enclosure protection class IP 54 complete as required and as specified with the following: |
| 846 | INCOMER - |
| 847 | Each Incomer shall consist of : |
| 848 | 350 Amps, Four pole, 35 KA MCCB with rotary handle on door. |
| 849 | Voltmeter (0-500 Volts) with selector Switch & protected by MCB's. |
| 850 | Ammeter (0-400 Amps) with selector Switch &CT's etc. |
| 851 | Set of (R,Y,B) LED phase and ON & OFF indication Lamps. |
| 852 | BUSBAR |
| 853 | 1 Set 415V, 400 Amps Three Phase bus bars of aluminum with Rear cable termination. |
| 854 | OUT GOING FOR :- |
| 855 | Filter feed pumps set ( 2 Nos. Pump - 1 set) |
| 856 | Pump feeder shall consist of : |
| 857 | Suitable rating MPCB with DOL Starter for outgoing feeder of 5.5 HP. Each Compartment shall contain Auto/Manual Selector Switch and Indicating Lamp for ON/TRIP Status of Motor---3 Nos. |
| 858 | Ammeter (0-100 Amps) with selector Switch & CT's etc. |
| 859 | Set of ON / OFF LED indication Lamps protected by MCB. |
| 860 | Make Up water supply Pump to STP set ( 2 Nos. Pump - 1 set) |
| 861 | Pump feeder shall consist of : |
| 862 | Suitable rating MPCB with DOL Starter for outgoing feeder of 7.5 HP. Each Compartment shall contain Auto/Manual Selector Switch and Indicating Lamp for ON/TRIP Status of Motor---3 Nos. |
| 863 | Ammeter (0-100 Amps) with selector Switch & CT's etc. |
| 864 | Set of ON / OFF LED indication Lamps protected by MCB. |
| 865 | Domestic Water Supply Pumps for filling of water tanks ( 2 Nos. Pump - 1 set) |
| 866 | 100 Amps. TP with neutral link MCCB ( Motor Duty) 1.1 KA with rotary handle on door suitable for 21 HP and for Connection to Built up Hydro Panel.---1No. |
| 867 | Chlorine dosing system |
| 868 | Each pump set feeder shall consist of : |
| 869 | 6 Amps. DP, 10 KA \\"C\\" curve MCB with DOL Starter suitable for single phase 240 V, 50 Hz AC supply. Inter locking with filter feed pump treated water pump suitable for 0.5 HP ---4Nos. |
| 870 | Set of ON / OFF indication Lamps protected by MCB. |
| 871 | For Drainage Sump Pumps Plant Room area - 2 Nos.(1W +1S) - 1 set |
| 872 | Pump feeder shall consist of : |
| 873 | 32 Amps. TP MCCB 25 KA with rotary handle on door suitable for Connection to Built up Panel.--1No |
| 874 | NOTE:-1. All MCCB shall have 100% Ics =Icu 2.Panel shall be provided with NO-NC Potential free contact for BMS compliance. |
| 875 | Providing and fixing centralized Contol / Monitoring Panel for water level controller cum indicating system, as per the following details: |
| 876 | Centralized PLC control panel along with touch-screen display board (min. 8\\" Diag. size) along with all accessories for complete controls & indication. Panel shall be made out of CRCA sheet min. 2mm thick having necessary interlocks, I/O's, required number of repeater amplifiers, all audio-visual alarms as required specifications as listed below. An emergency stop push button shall be provided in the panel. The panel shall have Modbus compatibility for seamless BMS/BAS Integration and shall be of approved make. The complete system control matrix, wiring diagram, SLD's and technical details shall be submitted by the vendor and gotten approved before commencement of execution of works. |
| 877 | Water level indicators cum controllers working on hydrostatic pressure measurement principle made of Stainless Steel for installation on storage tanks, and capable of providing 4 to 20 mA analog signal compatible with PLC signal inputs and complete as per working requirements for details of equipment below. All control outputs to MCC panel shall be included as per requierments. |
| 878 | Fire Static Underground tanks |
| 879 | Real-Time water level indication for monitoring |
| 880 | V. Low Level audio-visual alarm at less than 25% total capacity. |
| 881 | Raw Water Underground tanks |
| 882 | Real-Time water level indication for monitoring |
| 883 | V. Low Level audio-visual alarm at less than 30% total capacity. |
| 884 | V. High Level audio-visual alarm at more than 100% total capacity. |
| 885 | Auto cut-in of tubewell pumps at 35% |
| 886 | Auto cut-out of tubewell pumps at 95% |
| 887 | Auto cut-out of raw water pumps at 35% |
| 888 | Domestic Water Underground tanks |
| 889 | Real-Time water level indication for monitoring |
| 890 | V. Low Level audio-visual alarm at less than 30% total capacity. |
| 891 | V. High Level audio-visual alarm at more than 100% total capacity. |
| 892 | Auto cut-in of raw water pumps at 35% |
| 893 | Auto cut-out of domestic water hydro pumps at 10% |
| 894 | Manhole Cover for U.G Tanks and Sumps |
| 895 | Providing and fixing extra heavy duty, Water tight double sealed Ductile Iron circular Manhole Cover and Frames specially casted for placing over the underground water tanks with lifting and locking arrangements as per approved sample, complete in all respect including fixing in PCC as per site requirement. |
| 896 | Providing & fixing M.S. structural work fabricated from standard section e.g. M.S Flat Strips, Round Bars, angles, channels, plates etc.. including cutting to size, drilling, welding, fixing either by welding to insert plates in RCC structural members including cutting and making good the walls, ceilings and floors or by dash fasteners. (As per the Instructions of the Project-in-Charge) |
| 897 | Providing orange colour safety foot rest of minimum 6mm thick, plastic encapsulated as per I.S:10910 on 12 mm dia steel bar conforming to I.S:1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) complete as per standard design. |
| 898 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. |
| 899 | 100 mm width X 50 mm depth X 1.6 mm thickness |
| 900 | 150 mm width X 50 mm depth X 1.6 mm thickness |
| 901 | 200 mm width X 50 mm depth X 1.6 mm thickness |
| 902 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 903 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 904 | 50 mm dia |
| 905 | 65 mm dia |
| 906 | 80 mm dia |
| 907 | 100 mm dia |
| 908 | 150 mm dia |
| 909 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required |
| 910 | 50 mm dia |
| 911 | 65 mm dia |
| 912 | 80 mm dia. |
| 913 | 100 mm dia. |
| 914 | 150 mm dia |
| 915 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 916 | 50 mm dia |
| 917 | 65mm dia. |
| 918 | 80 mm dia. |
| 919 | 100 mm dia. |
| 920 | 150 mm dia. |
| 921 | Supply, installation, testing and commissioning reinforced neoprene rubber vibration eliminators/expansion joints (to provide relief from stresses at pipe flanges) suitable for up to 20 kg/cm2 pressure complete as per specifications as required. |
| 922 | 50 mm dia |
| 923 | 65 mm dia |
| 924 | 80 mm dia |
| 925 | 100 mm dia. |
| 926 | 150 mm dia. |
| 927 | Providing, installation, testing and commissioning of Cast Iron Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
| 928 | 150mm dia |
| 929 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 930 | 3 X 10 sq. mm (22mm) |
| 931 | 4 X 25 sq. mm (28mm) |
| 932 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 933 | 3 x 6 sq. mm |
| 934 | 3 x 4 sq. mm |
| 935 | 2 x 1.5 sq. mm |
| 936 | STP SYSTEM MBR - 200 KLD |
| 937 | Design, supplying, installing, testing & commissioning of Sewage Treatment Plant (excluding civil work, excavation, back filling & disposal of surplus earth Civil construction work) for the following duty: |
| 938 | Nature of effluent -Domestic Sewage from Public toilets, Kitchen etc. |
| 939 | Daily average flow - 200 M3/Day) |
| 940 | Inlet Parameters |
| 941 | pH- 5.9 - 9.0 |
| 942 | BOD5- 250 – 300 Mg/L |
| 943 | S. Solids - 200 – 400 Mg/L |
| 944 | COD- 400 – 600 Mg/L |
| 945 | Oil & Grease - 30 Mg / L |
| 946 | Effluent discharge standard after treatment |
| 947 | pH- 5.9 - 9.0 |
| 948 | BOD5 - Less than 5 Mg/L |
| 949 | S. Solids- Less than 5 Mg/L |
| 950 | COD - Less than 10 Mg/L |
| 951 | Oil & Grease - Less than 1 Mg/L |
| 952 | Sewage treatment plant shall include the following items: |
| 953 | Bar Screen Chamber |
| 954 | Oil & Grease Trap |
| 955 | Equalization Tank (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class \\"F\\" insulation & efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. |
| 956 | Anoxic Tank |
| 957 | Aeration Tank |
| 958 | MBR Tank |
| 959 | Flushing Water Tank |
| 960 | Soft Water Tank |
| 961 | Sludge Holding Tank |
| 962 | NOTE; |
| 963 | (1) All civil works, including RCC tank casting, waterproofing, plastering, and structural works duly tested for leak-proofing, plant room flooring, etc., and related S.S./M.S./C.I. works such as supply and fixing of handrails, manholes, gratings, grills, doors, vents, footrests, foundations, platforms, etc., shall be in the scope of the Civil Contractor/Client. Supervision for fixing of puddle flanges of approved quality will be in the scope of the STP Contractor. |
| 964 | (2) STP Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned components. |
| 965 | Supply, installation, testing & commissioning of 2 Nos MS Resin Quoted/ SS Bar Screen of 5 mm and 10 mm screen size with suitable lifting arrangement. |
| 966 | Supplying and fixing Stainless Steel suitable sized Automatic fine screen/ Static Screw Fine Screen made of SS in RCC screen channel as per following specifications. |
| 967 | Supply, installation, testing & commissioning of electronic type level indicator and controller for automatic operation of the system with high/ low level complete with auxillary NO/NC contacts. |
| 968 | Supply, installation, testing & commissioning of non clogging type pumps capable of handling solids upto 30-35 mm having CI body & CI impeller complete with all accessories, motor of required capacity, delivery header, valves, level controller (with wiring) to control the level of sump automatically. |
| 969 | Submersible Sewage Transfer Pumps |
| 970 | Flow rate (each)= 14 m3/hr |
| 971 | Head =8 - 10 Mtr |
| 972 | SHC=30 - 35 mm |
| 973 | MOC = CI Casing & CI Impeller |
| 974 | Qty = 1W+1S |
| 975 | Plant Room Sump Pump |
| 976 | Flow rate (each)= 40 m3/hr |
| 977 | Head= 10Mtr |
| 978 | SHC=30 - 35 mm |
| 979 | MOC = CI Casing & CI Impeller |
| 980 | Qty = 1W+1S |
| 981 | Cost shall be inclusive of PVC flexible Hose pipe( for piping submeged in effluent) with UPVC piping (for piping non-submerged in sewage) |
| 982 | Supply, installation, testing & commissioning of non clogging Self priming horizontal surface type Sludge recirculation pumps capable of handling solids upto 10 mm having CI body & CI impeller complete with all accessories, motor of required capacity, suction and delivery header and valves. Pumpsshall have following duty : |
| 983 | Flow rate (each)= 7 m3/hr |
| 984 | Head = 6 - 8 Mtr |
| 985 | (Solid handling size for this pump shall be 7 - 10 mm). |
| 986 | MOC = CI Casing, CI Impeller & Mech. Seal |
| 987 | Qty = 1W+1S |
| 988 | Providing and fixing of Submersible Agitator Mixer for Anoxic Tank - Min. 1 HP with CI Casing & PP/ CI/ SS Impellor.Guide Rail along with Lifting Arrangement to be provided along with the mixer in MS Resin coated / SS construction. |
| 989 | Air diffusion system shall include the following: |
| 990 | Supply, installation, testying and commissioning of Twin lobe rotary air blowers common for EQT & SHT capable of delivering 60m3/hr. of free air at 0.45 Kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 ± 10% volts, 3 Module, 50 cycles A/C supply. |
| 991 | Qty = 1W + 1SB |
| 992 | Supply, installation, testying and commissioning of Non clog type air dispersion system (Coarse Bubble Disc Type for Equalization Tank & SHT) with optimum through put and oxygen transfer efficiency of 6% per meter submergence. |
| 993 | Supply, installation, testing and commissioning of VFD based Twin lobe rotary air blowers common for AerationTanks (1&2) + MBR Air Scouring capable of delivering 200 m3/hr. of free air at 0.45 Kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 Module, 50 cycles A/C supply. |
| 994 | VFD = 2 No. |
| 995 | Qty = 1W+1S |
| 996 | Supply, installation, testing and commissioning of Non clog type air dispersion system (Fine Bubble Tubular Type for Aeration Tanks and MBR Tanks 1 & 2) with optimum throughput and oxygen transfer efficiency of 6% per meter submergence. |
| 997 | Supply, installation, testing & commissioning of MBR Membrane Module in MBR Tank of Sutaible Capacity for 200 KLD in SS 304 / MS Resin coated Skid. Membrane should be complete with accessories, piping, instrumentation, automation valves etc complete. Membrane shall be Flat sheet/ Ceramic Construction which is rugged & robust. Pore Size of MBR Membranes should not be less than 0.8 Micron. Cost should be inclusive of MBR Automation Valves and Membrane cleaning arrangement |
| 998 | Supplying, installing, testing and commissioning of Chlorine dosing system (Outlet of MBR Permeate Pumps) consisting of one LDPE tank of 100 litres capacity with diphragm dosing pump for Chlorine Dosing (1 No.) having variable flowrate of 0-6 lph. Themotor shall be suitable for operation at 240 V / single Module /50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves and injection fittings. |
| 999 | Supplying, installing, testing and commissioning of CIP dosing system (For MBR CIP) consisting of one LDPE tank of 100 litres capacity with diphragm dosing pump for Chlorine Dosing (1No.) having variable flow rate of 0-6 lph. The motor shall be suitable for operation at 240V/ single Module/ 50Hz Supply. The pump shall be supplied complete with necessary polypropylene piping, valves and injection fittings. |
| 1000 | Supply, installation, testing & commissioning of CIP HDPE Tank of 1000 Liters considering inlet & outlet connection. |
| 1001 | Providing and fixing all interconnecting piping (as described below) and isolation control valves for complete system. |
| 1002 | uPVC Sch40: Submerged waste water piping, submerged air piping, pumps suction and discharge headers, tanks overflow and drain, interconnecting. |
| 1003 | MS (Medium Class) : Exposed air piping, Frontal Piping of filters |
| 1004 | Supplying, installing, testing and commissioning of horizontal inline multistage centrifugal pumps with CI Casing, CI/SS 304 Impeller and CS/SS 304 Shaft. Each pump shall have TEFC 2900 RPM three Module electric motor. Pump shall be provided with single mechanical seal. Pump shall be complete with all accessories, suction and delivery header and valves. |
| 1005 | MBR Permeate Pumps |
| 1006 | Capacity = 7 m3/hr |
| 1007 | Head = 15M |
| 1008 | Type = Self Priming |
| 1009 | MOC= CI Casing, CI Impeller |
| 1010 | VFD = 2 No. |
| 1011 | Qty= 1W+1S |
| 1012 | MBR Backwash Pumps |
| 1013 | Capacity = 7 m3/hr or as per membrane manufacrurer recommendation |
| 1014 | Head = 20-25M |
| 1015 | Type = Horizontal inline multistage centrifugal pumps |
| 1016 | MOC = CI Casing, SS 304 Impeller |
| 1017 | Qty= 1W+1Sb |
| 1018 | Softener Feed Pumps |
| 1019 | Capacity= 14 m3/hr |
| 1020 | Head = 30 - 35M |
| 1021 | Type= Horizontal inline multistage centrifugal pumps |
| 1022 | MOC = CI Casing, SS 304 Impeller |
| 1023 | 1 Set = 1W+1S |
| 1024 | Providing, fixing, testing & commissioning of vertical MSEP / FRP Water Softener with adequate dirt holding capacity. Fabricated from MS sheet as per manufacturer's specifications complete with initial vessel media including painting inside with two coats of non toxic epoxy and with one coat of zinc chromate two coats of synthetic enamel paint outside. The softener shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (heavy)butterfly ,valves designed on 1.50 m / sec velocity and pressure gauges t inlet and outlet of Vessel for differential pressure. |
| 1025 | Feed Flow = 14 m3/hr |
| 1026 | OBR = 210 KL |
| 1027 | Inlet Hardness = 300 PPM |
| 1028 | Outlet Hardness = Less Than 50 PPM |
| 1029 | Size = 1100 mm Dia X 1800 mm HOS with 1050 Litres Resin |
| 1030 | Brine Tank = 700 Liters |
| 1031 | Providing, fixing, testing and commissioning of Filter Press with hydraulic operation mechanism for drying the organic sludge from tube settler, comprising 23 nos. of 23\\" × 23\\" size PP plates. The Filter Press shall be supplied with filter cloth and all other necessary accessories, complete in all respects. |
| 1032 | Supply, installation, testing & commissioning of non-clogging, self-priming, horizontal surface-type sludge recirculation pumps, capable of handling solids up to 10 mm, having CI body & CI impeller, complete with all accessories, motor of required capacity, suction and delivery header, and valves. Pump shall have the following duty: |
| 1033 | Flow rate (each)= 7 m3/hr |
| 1034 | Head = 6 - 8 Mtr |
| 1035 | (Solid handling size for this pump shall be 7 - 10 mm). |
| 1036 | MOC = CI Casing, CI Impeller & Mech. Seal |
| 1037 | Qty = 1W+1S |
| 1038 | Supplying, installing, testing and commissioning of Poly Dosing System consisting of one LDPE tank of 100 litres capacity with diaphragm dosing pump for poly dosing (1 No.) having variable flow rate of 0–6 LPH. The motor shall be suitable for operation at 240 V / single phase / 50 Hz. The pump shall be supplied complete with necessary polypropylene piping, valves, and injection fittings. |
| 1039 | Effluent / Treated Water Transfer Pump |
| 1040 | Providing, fixing, testing & commissioning of fully submersible, centrifugal non-clog effluent handling pump. The pump shall have C.I. casing, C.I. impeller, S.S. 304 shaft, submersible motor including pressure gauge on delivery line/header with isolation cock/ball valve, lifting arrangement for the pump, all necessary interconnecting piping, valves (ball valve/butterfly valve/NRV), level controller (with wiring) to control the level of sump automatically, probes/level sensors, power & control cable, etc., and other accessories as required. |
| 1041 | DUTY PARAMETER OF EFFLUENT TRANSFER PUMP: |
| 1042 | Capacity / Flow Rate of each pump - 7 M3/hr |
| 1043 | Pumping Head - 8 m - 10 m |
| 1044 | Solid Handling - 30mm (Minimum) or As per pump manufacturer |
| 1045 | Type of Pump - Monobloc |
| 1046 | Set of pump - 2 Nos. (1w+1s) |
| 1047 | AGITATOR |
| 1048 | Supply, installation, testing & commissioning of Gear Motorized Agitator Mixer for the Flocculation Tank, having SS 304 shaft and suitable rating motor and gear. |
| 1049 | ALUM DOSING SYSTEM |
| 1050 | Supply, installation, testing & commissioning of Alum Dosing System comprising 100 Ltrs capacity FRP/HDPE (chemical grade) tank with inlet/outlet connections, along with 01 no. metering pump of adjustable capacity for dosing of solution (0–6 LPH). The MOC of the pump shall be PP (Polypropylene) and the system shall be complete with all other fittings & accessories. |
| 1051 | POLY DOSING SYSTEM |
| 1052 | Supply, installing, testing & commissioning of polymer dosing system comprising of 100 Ltrs Cap.FRP/HDPE (chemical grade) tankwith inlet/outletconnection andalong with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene) and complete with all other fittings & accessories |
| 1053 | Supply, installation, testing & commissioning of PVC type Tube Settler Media in the Tube Settling Tank for settling purposes. |
| 1054 | Supply, installation, testing & commissioning of electro-magnetic type digital flow meter to be installed at raw sewage pump outlet line – one in each stream of 225 KLD. Flow meters must be BMS compatible with 4–20 mA output as required for BMS integration. |
| 1055 | Providing, fixing, testing & commissioning ofU.V. sterlizerwith 80 % transmission & UVdosingmorethan60000S.S. housing. U.V.lamp, glass tube and allother accessories as per manufacturer's specification with supports,inlets,outlet bypass connections & S.S. cabinet with glass door ofsuitablesize to house theU.V. sterilizer. The entire assembly shall be mounted on wall . |
| 1056 | At the Suction of Treated Water Transfer Pumps -7 m3/hr |
| 1057 | Supply of MS hot-dip galvanized puddle flanges in accordance with BS:10 Table D as required, to be provided (in the structural slab and wall) for various diameters. Puddle flanges shall be provided for all the structural components of the STP. The installation of the puddle flanges shall be carried out by the Civil Contractor in accordance with the Civil GA drawing (to be prepared by the STP Contractor) at the required levels and positions, under the supervision of the STP Contractor. |
| 1058 | Supply and fixing in position 1 m wide insulation mat made of elastomeric polymer material (Class-A) of 415 V grade as per IS 15642:2006. Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 kV dielectric strength as per IS 15652:2006. It should be complete as per specifications and directions of Engineer-in-Charge. |
| 1059 | Supply and fixing in position the best quality Danger Boards of approved shape and size as specified by Local Electricity Authorities written in English & Local Languages. |
| 1060 | Supply and fixing in position the approved “Shock Treatment Charts” written in English and Local Language.These charts shall be framed in teak wood frame and covered with glass. |
| 1061 | ETP- 50 KLD |
| 1062 | Design, detailed engineering, supplying, installing, testing & commissioning of Effluent Treatment Plant (ETP) (excluding civil work, excavation, back filling & disposal of surplus earth Civil construction work)with effluent handling capacity of 50 KLD. |
| 1063 | Daily average flow- 50 KLD |
| 1064 | Effluent treatment plant shall include the following items:- |
| 1065 | COMPONENT OF ETP : |
| 1066 | Equalization Tank with OGT & BSC |
| 1067 | Coagulation Tank |
| 1068 | Flocculation Tank |
| 1069 | Tube Settler Tank |
| 1070 | Filter Feed Tank |
| 1071 | Complete as above |
| 1072 | BAR SCREENS |
| 1073 | Supply, installation Testing & Commissioning of Screens stainless steel Moc of Suitable sized manually operated Bar screens made of SS304 in screen channels as per following specification. |
| 1074 | Cleaning : Mannual Screens |
| 1075 | Moc : Complete in SS 304 Screens |
| 1076 | PH CORRECTION DOSING SYSTEM |
| 1077 | Supply, installing, testing & commissioning of pH Correction dosing system comprising of 100 Ltrs Cap. FRP/HDPE (chemical grade) tank with inlet/outlet connection and along with 01 no. metering pump of adjustable capacity for dosing of solution (0-6LPH)). MoC of Pump shall be in PP (Polypropylene). complete with all other fittings & accessories [Location : Equalization Tank] |
| 1078 | EFFLUENT TRANSFER PUMP /EQUALIZED WASTE WATER TRANSFER PUMPS: |
| 1079 | Providing, fixing, testing & commissioning of fully submersible, centrifugal non-clog effluent handling pump for lab effluent transfer from equalization tank to flocculation tank. The pump shall have C.I. casing, C.I. impeller, S.S. 304 shaft, submersible motor including pressure gauge on delivery line/header with isolation cock/ball valve, lifting arrangement for the pump, all necessary interconnecting piping, valves (ball valve/butterfly valve/NRV), level controller (with wiring) to control the level of sump automatically, probes/level sensors, power & control cable etc., and other accessories as required. Pump shall be capable of handling solids 30 mm (minimum) or as per pump manufacturer. Pump shall have following duty. |
| 1080 | DUTY PARAMETER OF EFFLUENT TRANSFER PUMP: |
| 1081 | Capacity / Flow Rate of each pump - 3.0 M3/hr |
| 1082 | Pumping Head - 8 m - 10 m |
| 1083 | Solid Handling - 30mm (Minimum) or As per pump manufacturer |
| 1084 | Type of Pump - Submersible sewage handling type pump |
| 1085 | Location -Equalization Tank |
| 1086 | Set of pump - 2 Nos. (1w+1s) |
| 1087 | SLUDGE RECIRCULATION PUMPS: |
| 1088 | Supply, installation, testing & commissioning of Sludge Recirculation Pumps cum Centrifuge Feed Pumps for feeding the sludge to the Centrifuge system, complete with all accessories and motor of required capacity. The pump shall be complete with base frame, delivery header with pressure gauge on the delivery line, as per the following specifications: |
| 1089 | Flow rate/capacity- 3 M3/hr |
| 1090 | Pumping Head - 6-8 M |
| 1091 | Type - Non-Clog self Priming. |
| 1092 | Pump casing- CI |
| 1093 | Set of pump - 2 Nos. (1w+1s) |
| 1094 | AGITATOR |
| 1095 | Supply, installation, testing & commissioning of Gear Motorized Agitator Mixer for the Coagulation Tank, having SS 304 shaft and suitable rating motor and gear. [Location: Coagulation Tank] |
| 1096 | Supply, installation, testing & commissioning of Gear Motorized Agitator Mixer for the Flocculation Tank, having SS 304 shaft and suitable rating motor and gear. [Location: Flocculation Tank] |
| 1097 | ALUM DOSING SYSTEM |
| 1098 | Supply, installing, testing & commissioning of Aum Dosing System comprising of 100 Ltrs Cap. FRP/HDPE (chemical grade) tankwith inlet/outlet connection and along with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene) and complete with all other fittings & accessories [Location : Coagulation Tank] |
| 1099 | POLY DOSING SYSTEM |
| 1100 | Supply, installing, testing & commissioning of polymer dosing system comprising of 100 Ltrs Cap.FRP/HDPE (chemical grade) tankwith inlet/outletconnection andalong with 01 no. metering pump of adjustable capacity for dosing of solution (0-6 LPH) ). MoC of Pump shall be in PP (Polypropylene)and complete with all other fittings & accessories [Location : Flocculation Tank]. |
| 1101 | Supply, Installation Testing & Commissioning of PVC Type Tube Settler Media in the Tube Settling Tank for Settling purpose. |
| 1102 | FILTER FEED PUMP: |
| 1103 | Providing, fixing, testing & commissioning of horizontal/vertical centrifugal pumps for filtration process. The pumps shall be made of CI body, CI Impeller, SS shaft. Mechanical Seal are connected to a TEFC induction motor mounted on a common channel base frame with coupling guard, 63 mm dia pressure gauge with GM isolation cock/ball valve on delivery line of each pump, dry running protection. Motor tobe suitable for 415± 10% V, 3 Module, 50 cycles AC power supply, including all necessary headers, Inter connected piping, valves (ballvalve /butterflyvalve /nonreturnvalve), Y-Strainer, level controller including probes with power & control cable and dry running protection complete as required. |
| 1104 | DUTY PARAMETER OF FILTER FEED PUMP: |
| 1105 | Capacity/Flow rate of each pump - 3.0 M3/hr |
| 1106 | Pumping Head - 30-35 m |
| 1107 | Location - ETP Plant Room |
| 1108 | Set of pump - 2 Nos. (1w+1s) |
| 1109 | DUAL MEDIA FILTER |
| 1110 | Supply, installation, testing and commissioning of FRP filter vessel with all necessary accessories. The filter shall be suitable for a minimum working pressure of 3.0 kg/cm² and shall include filter media, manual multiport valve, standard fittings like pressure gauge at inlet & outlet, rinse drain, rotameter in the outlet, etc., complete with UPVC interconnecting pipe and all required accessories. |
| 1111 | Dual Media Filter: |
| 1112 | Flow rate /capacity- 3.0 m3/hr |
| 1113 | Filtration velocity - 14-15 m3/hr/m2 |
| 1114 | Suggested filter diameter - 16'' (400 mm) |
| 1115 | Filter Hos - 65\\" (1625 mm) |
| 1116 | Working pressure- 3.0 kg/cm2 |
| 1117 | Test Pressure - 4.5 kg/cm2 |
| 1118 | Filter Media - Sand Media, Gravels & Pebbles |
| 1119 | Providing, fixing, testing & commissioning ofU.V. sterlizerwith 80 % transmission & UVdosingmorethan60000S.S. housing. U.V.lamp, glass tube and allother accessories as per manufacturer's specification with supports,inlets,outlet bypass connections & S.S. cabinet with glass door ofsuitablesize to house theU.V. sterilizer. The entire assembly shall be mounted on wall . |
| 1120 | At the discharge of ETP - 1.0 m3/hr |
| 1121 | Supply, installation, testing & commissioning of Sludge Dewatering System comprising of 12\\" dia Basket Centrifuge. The MOC of the centrifuge shall be MS with PP bag. The unit shall be complete with inlet/outlet connections, all fittings & accessories, complete in all respects. |
| 1122 | POLY DOSING SYSTEM FOR DEWATERING |
| 1123 | Supply, installation, testing & commissioning of Polydosing System for dewatering, comprising of 100 Ltrs capacity FRP/HDPE (chemical grade) tank with inlet/outlet connections, along with 01 no. metering pump of adjustable capacity for dosing of solution (0–6 LPH). The MOC of the pump shall be PP (Polypropylene) and the system shall be complete with all necessary fittings & accessories. [Location: Inlet of Centrifuge] |
| 1124 | Providing, Fixing, Testing & Commissioning of all piping & fittings (as described below) and Isolation control valves (Ball valve/Butterfly valve), not returnvalve formaking the system complete. |
| 1125 | UPVC: Submerged piping / pump suction, pump discharge headers, tank overflow, drain, frontal, interconnecting, and wastewater piping. |
| 1126 | MAGNETIC FLOW METER : |
| 1127 | Providing, fixing, testing and commissioning of inline flange mounted magnetic flow meter with IP65 protection, fullbase, rubber/PTEF liners, SS316L/Hostelloy B, C/Ti/Ta electrodes, SS-304 flow tube, 0.3% in 0.5% of accuracy 220VAC, 50Hz/optional 24VDC supply 20 to180 o Casper model/selection, suitable for sewage & water including all fitting & accessories complete with bypass arrangement. |
| 1128 | Capacity - 3.0 m3/Hr (As per requirement of Line Flow). |
| 1129 | Location - at Effluent Transfer Pump outlet |
| 1130 | STP & ETP |
| 1131 | Design, Fabrication, Supply, installation, testing and commissioning, wiring, supply of motor control centre shall be fabricated out of 14gauge CRCA sheet steel in form in Type 2 Coordination with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary.Cable gl and plates shall be provided on to pas well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. Earthing terminals shall be provided for 3 Module, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. |
| 1132 | Note - Contractor to evaluate the feeder/MCCB rating as per actual requirement |
| 1133 | Incoming |
| 1134 | 150 amps TPN MCCB with the following accessories: |
| 1135 | a. 0-200 volts 96 x 96 mm square voltmeter with selector switch shall be protected by2 amps TP MCB.1 Set |
| 1136 | b. 0-500 amps 96 x 96 mm square ammeter with selector switch and 150/5 amps 10 VA CL:1 CTs. 1 Set |
| 1137 | c. Module indicating lamps shall be protected by 2 amp SP MCB 3 Sets |
| 1138 | Bus Bar |
| 1139 | 250 amps TPN (25 KA) aluminium bus bar with heat shrinkable insulation sleeves |
| 1140 | Outgoings |
| 1141 | 2W+1SB Suitable rating MPCB forstarter and outgoing feeder to raw sewage transfer pumps. Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1142 | 1W+1SBSuitableratingMPCBforstarterandoutgoingfeedertoPlantroomsump pumps. Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1143 | 2W+1SB Suitable ratingMPCBforstarterandoutgoingfeedertoSludgerecirculation pumps. Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1144 | 1W+1SB Suitable rating MPCB for starter and outgoing feeder to Air Blowers of EQT & SHT. Eachcompartmentshallcontainauto/manualselectorswtichandindicating/ pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1145 | 2W+1SBSuitableratingMPCBforstarterandoutgoingfeedertoAirBlowersof Aeration&MBR. Eachcompartmentshallcontainauto/manualselectorswtichand indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1146 | 2W+1SB Suitable rating MPCB for starter and outgoing feeder to MBR Suction Pumps. Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1147 | 2W+1SBSuitableratingMPCBforstarterandoutgoingfeedertoMBRBackwash Pumps.Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1148 | 1W+1SBSuitableratingMPCBforstarterandoutgoingfeedertoSoftenerFeed Pumps.Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1149 | 1W+1SBSuitableratingMPCBforstarterandoutgoingfeedertoFilterPressFeed Pumps.Each compartment shall contain auto / manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. (i) In- line vertical multistage centrifugal water pump set (for clear water) with SS-304 casing, SS-304 impeller with SS-316 shaft ,CI base with coating complete directly coupled with TEFC induction motor of class \\"F\\" insulation & efficiency class IE-3, 2900rpm, suitable for operation on 415 Volts ±10%, 3 phase, 50 Hz A.C. supply. The entire system shall be mounted on a common base frame i/c common suction and common delivery of G.I heavy class pipe headers with flanges, interconnecting piping with all required Control Valves, Non-return valves, pressure gauge with isolation cock etc. complete as required. |
| 1150 | 1W Suitablerating MPCB for starter and outgoing feeder toFilter Press.Each compartmentshallcontainauto/manualselectorswtichandindicating/pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1151 | 1W+1SB Suitable rating MPCB for starter and outgoing feeder to ETP Effluent Transfer Pumps(inEQT). Eachcompartmentshallcontainauto/manualselectorswtichand indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1152 | 1W+1SB Suitable rating MPCB forstarter and outgoing feeder to ETP Sludge Pumps. Each compartment shall contain auto / manual selector swtich and indicating / push button lamps with MCB for ON / OFF / TRIP of motor. |
| 1153 | 1W+1SB Suitable rating MPCB for starter and outgoing feeder to ETP FilterFeed Pumps.Each compartment shall contain auto/ manual selector swtich and indicating / pushbutton lamps with MCB for ON / OFF / TRIP of motor. |
| 1154 | Provision in panel for Agitators, Automatic Fine Screens, Dosing Pumps and Uvs. With required HP and Hydropneumatic System to be given in Electrical Panel. |
| 1155 | 1 Nos. suitable MCCB for 7.5 KW(approx)outgoing feeders toHPN starterpanel for Flushing. Each compartment shall contain VAF meter, auto/manual selector switch andindicating lamps with MCB for ‘ON/OFF/TRIP’ status of motor |
| 1156 | 1 Nos. suitable MCCB for 3.0 KW(approx)outgoing feeders toHPN starterpanel for Irrigation. Each compartment shall contain VAF meter, auto/manual selector switch and indicating lamps with MCB for ‘ON/OFF/TRIP’ status of motor |
| 1157 | 1W+1SB Suitable rating MPCB for starter and outgoing feeder to Softwater transfer pump. Each compartment shall contain auto/manual selector swtich and indicating / push button lamps with MCB for ON / OFF / TRIP of motor. |
| 1158 | Note: |
| 1159 | Provision shall be made for providing potential free contacts to all pumps starters for connection to building automation system. |
| 1160 | Necessary cable alleys, internal wiring, and interlocking, earthing for all equipment shall also included |
| 1161 | Note: |
| 1162 | All MCCB's to be suitable for motor duty and shall be of 25 KA breaking capacity. |
| 1163 | Provision shall be madefor providing potential free contacts to all pumps starters for connection to building automation system. |
| 1164 | Note: All Switchgear Ratings to be as per Actual final rating of equipment selection |
| 1165 | All cables with cable tray from STP/ETP panel to motors or equipments included. Cable selection will be as per motors rating. All cables will be FRLS copper upto 16 sqmm and aluminium above 16 sqmm. Incoming supply of STP/ETP panel will be provided by client |
| 1166 | H.T. PANELS AND TRANSFORMERS |
| 1167 | HT PANEL BOARD |
| 1168 | Supplying, Installation, Testing & Commissioning of Indoor type floor mounted fully Arc proof, sheet steel metal clad,11KV VCB panel with Following Nos. VCBs, totally enclosed & fully interlocked, suitable with shunt trip mechanism, including internal wiring with 1.5 Sq mm PVC insulated FRLS Copper conductor cable and CT wiring with 2.5 Sq mm PVC insulated FRLS Copper conductor cable, horizontal drawout, horizontal/ vertical isolation type breaker as per IEC 62271-100-200, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motorised charged and auto/manually closing breaker suitable for use on 11 KV, 3 Phase, 50Hz A.C. supply with short circuit fault level of 26.3 KA and Internal Arc Classified IAC AFLR 26.3 kA/0.1- sec,complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated self-supported Aluminium bus bars of 1250/800 Amps capacity extensible type, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, continuous duty shunt trip coil, automatic safety shutters, safety interlocks and auxiliary switch of 6 NO + 6 NC and equipped with following switchgears and accessories i/c connections suitable for 3 x 300 sq.mm. (for incoming ) / 3 X 300 Sq .mm. (for outgoing) XLPE 11KV cable (cable entry from top/bottom) with suitable size cable end box, end termination with heat shrinkable jointing material, Electronic hooter suitable for 230 Volt operation etc. as required with suitable size foundation as required at site. |
| 1169 | Main Receiving HT Panel (Grid Supply) - (11 KV)- (1 incoming / 1 Outgoing) |
| 1170 | Incoming/ Outgoing -1No. Each VCB HT Panel shall have following |
| 1171 | a) Incoming/ Outgoing -1No. 1250 Amp VCB. |
| 1172 | b)1 No. - Withdrawable 11KV/ 110 Volts PT Class 0.5 accuracy and 100 VA burden with associated encapsulated HRC fuses for primary isolation, space heater, 1 Nos. calibrated Intelligent multifunction digital panel meters of class 0.5 accuracy with multinine display with communication interface port RS 485 for giving output on BACNET/MODBUS protocol of IBMS forrecording V, A, KVA, KW, KWhr, KVAR, pf etc. complete with wiring, connections etc. |
| 1173 | c)1 No -Microprocessor based numerical relaywith O/L , E/F and S/Cprotection, having 04CT+05PT Inputs with microprocessor based protection scheme for detecting, indicating and tripping the breaker on various faults like (i) directional over-current or earth-fault in any of the three phases, (ii) negative sequence currents due to line-to-line or conductor- break faults, (iii) thermal runaway in cables monitored via simulated temperature control, (iv) circuit-breaker-failure alarm, (v) tripping-circuit-failures and GOOSE based inter- tripping to respective 11kV Outgoing VCB in case of circuit breaker failure to operate. Relay shall have RJ-45/USB communication port for peer-to-peer communication via Ethernet switchboard. |
| 1174 | d) Following cores of Current Transformers shall be provided for metering / protection:-Core 01:600/1, 10VA, Class 1.0 for Metering Core 02:600/1, 10VA. |
| 1175 | e) Indicating Lights, Push buttons, Space heater with thermostat complete with all standard accessories. Heater capacity shall be considered according to weather condition of guwahati. |
| 1176 | f) 8 Way annunciator window - 1 Nos. |
| 1177 | h) Breaker Control: TNC |
| 1178 | i) Surge Arrestor |
| 1179 | power pack with battery charger with 220 Volt AC input & 24Volt DC continuous output suitable for closing/ tripping/indication of 11 panel 11KV HT Both with 2 Nos. 12 Volts each maintenance free batteries of 180 (suitable) AH each, Battery charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter & Voltmeter i/c connections with 2.5 sq. mm FRLS insulated copper conductor cable etc. as required as separate unit. |
| 1180 | HT Panel described as above |
| 1181 | HT Panel for ESS - (11 KV)- (2 incoming / 1 Bus coupler / 4 Outgoings) |
| 1182 | Incoming - 2No. Each VCB HT Panel shall have following |
| 1183 | a) Incoming -1No. 1250 Amp VCB. |
| 1184 | b)1 No. - Withdrawable 11KV/ 110 Volts PT Class 0.5 accuracy and 100 VA burden with associated encapsulated HRC fuses for primary isolation, space heater, 1 Nos. calibrated Intelligent multifunction digital panel meters of class 0.5 accuracy with multinine display with communication interface port RS 485 for giving output on BACNET/MODBUS protocol of IBMS forrecording V, A, KVA, KW, KWhr, KVAR, pf etc. complete with wiring, connections etc. |
| 1185 | c)1 No -Microprocessor based numerical relaywith O/L , E/F and S/Cprotection, having 04CT+05PT Inputs with microprocessor based protection scheme for detecting, indicating and tripping the breaker on various faults like (i) directional over-current or earth-fault in any of the three phases, (ii) negative sequence currents due to line-to-line or conductor- break faults, (iii) thermal runaway in cables monitored via simulated temperature control, (iv) circuit-breaker-failure alarm, (v) tripping-circuit-failures and GOOSE based inter- tripping to respective 11kV Outgoing VCB in case of circuit breaker failure to operate. Relay shall have RJ-45/USB communication port for peer-to-peer communication via Ethernet switchboard. |
| 1186 | d) Following cores of Current Transformers shall be provided for metering / protection:-Core 01:600/1, 5VA, Class 1.0 for Metering Core 02:600/1, 5VA, Class 5P20 for Protection. |
| 1187 | e) Indicating Lights, Push buttons, Space heater with thermostat complete with all standard accessories. Heater capacity shall be considered according to weather condition of guwahati. |
| 1188 | g) 8 Way annunciator window - 1 Nos. |
| 1189 | h) Breaker Control: TNC |
| 1190 | i) Surge Arrestor |
| 1191 | a) Bus coupler -1 No. 1250 A VCB |
| 1192 | power pack with battery charger with 220 Volt AC input & 24Volt DC continuous output suitable for closing/ tripping/indication of 6 panel 11KV HT Both with 2 Nos. 12 Volts each maintenance free batteries of 180 (suitable) AH each, Battery charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter & Voltmeter i/c connections with 2.5 sq. mm FRLS insulated copper conductor cable etc. as required as separate unit. |
| 1193 | a) Outgoing - 4 Nos. 800 A VCB. Each VCB Panel shall have following |
| 1194 | a) Outgoing -1No. 800 Amp VCB. |
| 1195 | b)1 Nos. calibrated Intelligent multifunction digital panel meters of class 0.5 accuracywith multiline display communication interface port RS 485for giving output on BACNET/MODBUS protocol of IBMS for recording V, A, KVA, KW, KWhr, KVAR, pf etc. complete with wiring , connections etc. |
| 1196 | c) 1 Nos. - Microprocessor based numerical relays with O/L,E/F & S/C protections having protections including Overcurrent (min. setting 10% or less), Earth-Fault (min. setting 5% or less), Three Phase Inrush Detection, Circuit Breaker Control, Trip Ckt Supervision, Three Phase & Residual Current Measurement, non-volatile memory for 100-event log, five-fault- record with time-stamp, LCD screen and user-programmable 4DI/6DO for deployment of interlocking/indications etc. |
| 1197 | d) Following cores of Current Transformers shall be provided for metering / protection:-Core 01:150/1, 5VA, Class 1.0 for Metering Core 02:150/1, 5VA, Class 5P20 for Protection. |
| 1198 | e) Indicating Lights, Push buttons, Space heater with thermostat complete with all standard accessories. Heater capacity shall be considered according to weather condition of guwahati. |
| 1199 | f) 8 Way annunciator window |
| 1200 | g) Auxiliary relay for protection of Transformers. |
| 1201 | h) Breaker Control TNC switch |
| 1202 | i) Surge Arrestor |
| 1203 | HT Panel described as above |
| 1204 | Supply of Earth Truck Cable Side suitable for above 11 KV Panels. |
| 1205 | TRANSFORMER |
| 1206 | Supply, installation, testing and commissioning of following capacity (continuous loading) 11/0.433 KV Delta/Star,step down, 3 Phase, 50 Hz, Dyn 11 vectorSupply, installation, testing and commissioning of following capacity (continuous loading) 11/0.433 KV Delta/Star,step down, 3 Phase, 50 Hz, Dyn 11 vector group, Cast Resin / VPI (vacuum pressure impregnated) Dry Type, copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better) AN (air natural) cooled transformer suitable for indoor applications with Offload Tap Changer/ On Load Tap Changer (OLTC) ( upto 500 KVA offload and above 500 KVA On Load Tap Changer) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, insulation class F (minimum), suitable for environment conditions class E4, suitable for fire behaviour class F1,climate class-C1, having cable end boxes on HV side suitable for 3x300 sqmm XLPE cable of 11 KV grade with necessary hardware, clamps, lugs etc. for termination on HV/MV etc. for all transformers, bus trunking arrangement on LV side complete with all accessories and safety provisions as per relevant IS Code , |
| 1207 | The transformer shall be provided with standard fittings/accessories as per relevant IS and mentioned below, protection alarm/trip protection, 3 nos. of Polymeric Zinc Oxide surge Arrestors on HV Side. Winding Temperature scanner (Digital) with alarm/Trip contacts with RTD Sensors per LV winding and space for mounting differential protection CT's in LV chamber with neutral brought out separately including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/HT Panel for safety tripping, complete as confirming to IS-2026 Part-11, i/c supplying and grouting of suitable M.S. Channel with all accessories ,complete in all respects as required at site as per CPWD specifications . Design ambient condition : a) air temperature 50 0C, b) Relative Humidity 90 % Max, c) Seismic Zone as per location of site, d) Altitude as per location/site. The transformer should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. All testing shall as per relevant IS Code. Noise level Shall not exceed limits as per NEMA TR-1 with all accessories running measured as per IEC 551/ NEMA Standard. |
| 1208 | Fitting and Accessories : The following fittings shall be provided:- a) Two earthing terminals with the earthing symbol b) Rating and terminal marking plates; c) Thermometer pocket with cap; d) Lifting lugs for the complete transformer as well as for core and winding assembly; e) Bi-directional flat rollers (for transformers above 200 kVA); f) HV side neutral grounding strip (where one of the HV bushing terminal is connected to earth); g) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. for transformers up to 200 kVA; h) Bird guard; i) Jacking pads (for transformer above 1 600 kVA); j) Name Rating & Diagram Plate. k) Monogram Plate.i) Additional neutral separately brought out on bushing for earthing. |
| 1209 | Level 4 |
| 1210 | 2000 KVA (losses at 50% loading < 6150watt, losses at 100% loading < 18500watt) |
| 1211 | H.T. Cable |
| 1212 | Supply of following sizes of 11kV grade multicore aluminium conductor XLPE armoured power cable as per IS: 7098 amended upto date as per the following size. |
| 1213 | 3 Core, 300 Sq. mm |
| 1214 | HT Cable laying |
| 1215 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size in the existing RCC Trench/ HUME/ METAL pipe as required. |
| 1216 | Supplying and making Indoor end termination with Heat shrinkable compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 11 KV grade as required. |
| 1217 | 3 Core, 300 Sq. mm |
| 1218 | Supplying and making out door end termination with Heat shrinkable compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 11 KV grade as required. |
| 1219 | 3 Core, 300 Sq. mm |
| 1220 | Fabricating, Supply and installing of following size of GI closed type raceway in convenient sections, joined with connectors including horizontal and vertical bends, reducers, tees, cross members, clamps, connection pieces and other accessories as required, duly suspended from the ceiling with G.I. suspenders/wire rope system including bolts & nuts, including fabrication, powder coated etc. as required. |
| 1221 | 600mm widthx50mm depthx2.0mm thickness with (50x 50x 6 mm MS angle supports). |
| 1222 | 900mm widthx50mm depthx2.0mm thickness with (50x 50x 6 mm MS angle supports). |
| 1223 | SUPPLY OF DG SET - SITC OF D.G. SET |
| 1224 | Supply, Testing & Commissioning of diesel engine of following rating on common base frame alongwith ECP & other accessories like residential silencer, antivibration pad, batteries with leads, day oil fuel tank, suitable space heater for alternator, suitable amended arrangement for bus duct termination etc. as per EPC Tender & CPWD specification. |
| 1225 | The entire work shall confirm to Bureau of Indian Standards safety standards; British Standards, and CPWD specifications. |
| 1226 | DG Set shall have synchronizing facility. |
| 1227 | The D.G. Set shall be Radiator cooled. |
| 1228 | Working at ambient temperature between -5°C to 50°C and relative humidity upto 95%. |
| 1229 | Nominal output voltage of engine/alternator set shall be 415 volts 50 Hz AC Supply with manual adjustment at all conditions of load with coarse and fine controls with a range of ± 5%. |
| 1230 | The frequency shall be maintained at 50 Hz ± 2% for the set. The output wave-form shall be sinusoidal at all load conditions. |
| 1231 | The engine/alternator set shall be capable of taking 10% over-load for a period of one hour during any 12 hours period, while operating continuously at full rated load. |
| 1232 | The Engine shall be capable to minimum 60% bulk load of the rating during transfer of the load from NO Load position without tripping. |
| 1233 | The set may be idle for a long time except for periodical test whenever there is a electrical supply failure, the set may required to run continuously for period even exceeding 24 hours. |
| 1234 | The set shall have vibration limit less than 130 microns (as per BS:4999 Part – 142) & noise level shall be meet CPCB norms under all conditions of load. The efficient residential silencer shall be provided with or without catalytic converter on-line scrubber & the set shall meet EURO-II norms for D.G Sets, for the exhaust. Air inlet shall also be provided. |
| 1235 | The engine shall be stationary, compression ignition, totally enclosed, water cooled, 4 stroke direct injection, cold battery starting, turbo charged and low temperature with after cooled 1500 RPM in accordance to BS 5514 and IS: 10002 complete with all accessories. The DG engine shall be suitable for quick start & should be able to pick up 100% load within optimum time. The DG Engine & the batteries shall be designed to take up at least six starting attempts beyond which the system shall be protected by means of an over crank relay. The successful bidder will submit GFC drawings of the equipments/accessories selected for this work for the approval. |
| 1236 | The governor shall be Isochronous, electronic digital type with a steady state frequency variation of +/- .25%. The transient performance shall comply with ISO 8528-5, Class G3 requirements. |
| 1237 | The engine shall be water cooled heat exchanger type. |
| 1238 | The alternator shall be brushless synchronous and suitable for 3 phase 415 Volts, 4 wire, 50 Hz, 0.8 PF, 1500 RPM. The alternator shall be suitable for coupling directly to the diesel engine It shall be Drip proof, screen protected as per IP-23. The alternator shall be single bearing type & self ventilating. The alternators shall be continuously rated and shall have class ‗H‘ insulation with a temperature rise restricted to that of class F designed and built to withstand tropical conditions. It shall generally conform to BS: 5000 (Part - 99) / standards listed above. The alternator shall be suitable for sustaining a 10% overload for 1 hour in any 12 hour period without injury. The terminal arrangement for alternator shall be suitable for Bus Duct connections of adequate size to deliver the full load of the alternator. |
| 1239 | The alternator shall also have a solid state type digital voltage regulator (D.V.R.) suitable for single running with control limits of 1% from no load to full load under normal load changes. It shall be of static type and complete with cross current compensation. The regulator shall be provided with voltage adjusting potentiometer, and shall be complete with all alarm contacts, internal wiring, etc. |
| 1240 | Self excited, self regulated and providing alternator output regulation at plus or minus 0.25%. The alternator shall be provided with a pilot-excited, permanent magnet-excited generator (PMG) for superior short circuit capabilities. Bidders to specify sustained short circuit current capabilities for up to 10 seconds. The alternator shall be provided with sealed Barings. Load factor shall be 0.85. |
| 1241 | 24V DC Starting system comprising of starter motors: Voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (25 Plates, 160 Amp. Hour capacity maintenance free) as required as per specifications. |
| 1242 | Daily service fuel tank of 990 liters capacity fabricated out of 3 mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS Class C pipe of suitable dia complete with valves, level indication, including buffer tank and overflow tanks flow switch with potential free contacts for giving signal to existing BMS system and accessories as required as per specifications. |
| 1243 | 1250 KVA D.G. Set described as above and as per tender specification. |
| 1244 | SUB HEAD - III - DG LOW SIDE WORK |
| 1245 | Supplying of following dia M.S. Pipe heavy duty class C with all accessories such as bends flanges and supporting arrangement as required at site for DG Exhaust as per relevant IS:3589 including LRV rock wool insulation having 100 kg per m3 density 75 mm thick for exhaust pipe with chicken wire mesh and cladding with 24 gauge aluminium sheet, for exhaust of smoke of D.G. Sets including fixing the M.S. cladded pipes on the existing structure (including fixing of silencers, flexible bellows to be supplied by the owner as part of standard D.G. Supply) on the wall/ ceiling including cutting, welding primer coating and painting of supports etc. complete as required. |
| 1246 | The contractor shall submitt back pressure calculation in support of exhaust pipe size for each DG Set. |
| 1247 | 350 mm dia x 5.0 mm nominal thick |
| 1248 | 250 mm dia x 5.0 mm nominal thick |
| 1249 | Supply and fixing of stainless steel flexible bellows in exhaust pipe in vertical / horizontal formation including flanges of thickness 12 mm, GI nut bolt accessories as required at site.& as per manufacturer's recommendation complete as required. |
| 1250 | 250 mm |
| 1251 | 350 mm |
| 1252 | Supply and fixing of Y-bend as per requrement |
| 1253 | HIGH STORAGE DIESEL TANK AND ACCESSORIES |
| 1254 | Supply, Installation, Testing & Commissioning of 20 KL capacity mild steel horizontal cylindrical underground HSD tank (2.5M dia & 5.5M length) with shell 6mm and end plate 10mm thick suitable for underground installation complete with manhole accessories, fittings, piping inside the tank Decanting hose, foot ball, bucket filter etc. with paint with inside surface scrapped clean, anti corrosive paint on outer surface of tank. Tank will be tested at works under hydrostatic pressure of 5 psi before being painted with two coats of Red Oxide Primer as required as per specifications. |
| 1255 | Supply, fixing, testing and commissioning of M.S. heavy class ERW piping (Class-C) conforming to IS : l239 with necessary clamps, supports, anti vibration mountings, hangers and fittings such as bends, tees, reducers etc. painted as per specifications: |
| 1256 | 80 mm dia |
| 1257 | VALVES & STRAINERS |
| 1258 | Supply, Fixing and Testing of following valves, strainers, in the H.S.D. Fuel Handling System piping complete with companion flanges, nut bolts, gaskets, supports and painted etc. as per specifications : |
| 1259 | Ball valves : |
| 1260 | 80mm dia. |
| 1261 | 65mm dia. |
| 1262 | Non return valves :- |
| 1263 | 65mm dia |
| 1264 | Y-strainers :- |
| 1265 | 65mm dia. |
| 1266 | 80mm dia. |
| 1267 | Supply and erection of canopy type M.S.Structure made out of 40mm medium class M.S. pipe (Class-B), 25 x 25 x 3 mm angle iron frame work and 14 SWG GI Sheet. Structure shall be grouted in C.C. 1:2:4 foundation for hanging 4 Nos. 9 litre each fire fighting buckets including providing buckets with two coats of anticorrosive paints etc. complete as required. |
| 1268 | Supply and installation of 50ltr capacity Chemical Foam Fire Extinguisher with trolley suitable for Petroleum Fires Protection conforming to IS : 5507. |
| 1269 | Supply and installation of 5 kg. capacity dry chemical powder type fire extinguishers conforming to IS : 2171. |
| 1270 | Supply of suitable sizes sign boards as per IPR :1976 and fixing the same at various locations within the petroleum installation complete with painting and installation. |
| 1271 | Supply & erection of 3 HP Flame Proof positive displacement type HSD pump inside the fuel tank yard having mechanical seal complete with all accessories, fixing on M.S. channel including making earthing as required. |
| 1272 | 100 LPM, 15 M Head & Suction head not less than 3.5 m |
| 1273 | Supply and fixing of flow meter for diesel line as required. |
| 1274 | 80mm dia. |
| 1275 | 50mm dia. |
| 1276 | Supply, Laying, Testing & Commissiong of FRLS Aluminium Armoured Cable with earthing in ground including excavation of trench, sand & brick protection, back filling of trench, termination etc. as complete as required. |
| 1277 | 4C X 4 Sq.mm FRLS Al. Ar. Cable. |
| 1278 | Supply, Installation, Testing & Commissioning of 32A Flame Proof out door type isolator switch, M.S. Stand, earthing etc complete as required. |
| 1279 | Liasioning work for getting the HSD Yard layout drawing approval and licence / NOC from concern department. |
| 1280 | Supply, Installation, Testing & Commissioning of 990 litre Buffer deisel tank with foot ball, all necessay socket etc as per specification as complete as required. |
| 1281 | Supply and installation of oil level controllers for day oil tanks and for overflow tank in S.S. 304 construction, having flame proof terminal enclosure to automatically operate the oil transfer pumps (ON/OFF) at preset level positions. |
| 1282 | Providing & fixing of 65 mm dia, 220 Volt, solinoid valve with fire proof terminal etc. as complete as required. |
| 1283 | Supply & Wiring for buffer tanks automation with 1.5 sq.mm FRLS copper wire in M.S. Conduit etc. as complete as required. |
| 1284 | Supply, Installation, Testing & Commissioning of remote level controller with level controller for 20 KL HSD Tank etc. as complete as required. |
| 1285 | SUB HEAD - VII - BUS TRUNKING SYSTEM SANDWITCH TYPE |
| 1286 | Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap of boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required |
| 1287 | 1600 Amps with Isc = 50kA SC for 1 sec. |
| 1288 | 3200 Amps with Isc = 50kA SC for 1 sec. |
| 1289 | Providing and fixing M.V./ HT danger notice plate of following size, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required |
| 1290 | 200 mm X 150 mm, MV danger plate |
| 1291 | 250 mm X 200 mm,HT danger plate |
| 1292 | Providing of Set of 4 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint 'FIRE' and mounted on MS angle iron frame with bracket of appropriate size & capacity I/c filling sand etc. complete as required. |
| 1293 | Providing of First Aid Box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS 2217-1963. |
| 1294 | Supplying & Fixing Shock treat chart duly mounted on a wooden frame with 5mm thick glass on as reqd. (approximate front area 1.20sq.metre) in 2 languages (Hindi & English) |
| 1295 | Supply and fixing 3mm (nominal + - 10%) thick and 1 mtr wide synthetic insulation mat suitable for 11 KV grade as per IS: 15652:2006 with upto date amendments along with suitable adhesive / sealing material, having properties like high insulation resistance, fire retardant, anti skid, good mechanical strength and moistureproofi/c sealing of all joints as required. |
| 1296 | Supply and fixing 2 mm (nominal + - 10%) thick and 1 mtr wide synthetic insulation mat suitable for 1.1 KV grade as per IS: 15652:2006 with upto date amendments along with suitable adhesive / sealing material, having properties like high insulation resistance, fire retardant, anti skid, good mechanical strength and moistureproof i/c sealing of all joints as required. |
| 1297 | MAIN LT PANEL |
| 1298 | Supplying, installation, testing & commissioning of cubical type floor mounted LT panel double door typel having suitable depth and suitable front face areasuitable for 415V, 3 Phase, 4Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for load bearing members and 1.6 mm thick for non load bearing members , 3 mm thick for gland plates i/c cleaning & surface treatment with 9 tank process before powder coating in approved shade, suitbale capacity extensible type TPN Aluminium Alloy bus bars with suitable rating Neutral of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 65 KA for I Sec. |
| 1299 | bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common GI of size 75mm x 10mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, i/c providing following switch gears:- |
| 1300 | MAIN LT PANEL ESS |
| 1301 | Incomers |
| 1302 | i) 3200 Amp, 4 Pole ACB - 3 set (For 2000 KVA Transformer ) |
| 1303 | Air Circuit Breaker Horizontal drawout type of fault breaking capacity 65KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS-13947-2 1993 as amended up-to-date complete with Independent Electrical & manualspringclosing mechanism, Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary interlocking with PLC auto controls etc. as required including following accessories and suitable to receive bus duct connections. All incoming ACB shall have Load shedding and reconnection thru programmable contacts |
| 1304 | ii) 1600 Amp, 4 Pole ACB - 3 set (For DG Synch Panel ) |
| 1305 | Air Circuit Breaker Horizontal drawout type of fault breaking capacity 65KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS-13947-2 1993 as amended up-to-date complete with Independent Electrical & manualspringclosing mechanism, Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary interlocking with PLC auto controls etc. as required including following accessories and suitable to receive bus duct connections. All incoming ACB shall have Load shedding and reconnection thru programmable contacts |
| 1306 | Metering, indications and protections for each incomer: |
| 1307 | a) LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs. |
| 1308 | b) Set of Digital flush type multifunction meters (with RS485 port), class - 0.5 accuracy , showing V, A, PF, Hz, KW, KWH, KVAR, Individual harmonics distortion etc. with 3 Nos. cast resin current transformers of suitable ratio, 15 VA Class 0.5 metering. |
| 1309 | c) Under voltage/ Overvoltage with definite time relay & master trip relays - 1 set for Transformer incomer. |
| 1310 | d) Suitable size & nos of CT's for all protection relays (class 5P10, 15VA) & APFC Relay (class 0.5, 15VA) as per drawings. |
| 1311 | 06 Set Surge Protective Devices |
| 1312 | Bus Coupler |
| 1313 | 2 No. 3200 Amp as per design, 415V(Ics=Icu=Icw 65 KA for 1 second), 4 Pole, EDO ACB Electrical draw out type, Micro-processor based release Electrically interlocked, with all indications,push buttons etc. complete in all respects as mentioned in specifications and as required:- |
| 1314 | 1 Set of ON/Trip indicating lamps |
| 1315 | 1 No. DC under voltage trip relay |
| 1316 | Bus Bar |
| 1317 | TPN aluminium extensible type main bus bars 4000 Amp continuous rating (As per capacity of corresponding incoming / Bus couplers) , and auxilliary bus bar of suitable capacity with heat shrinkable coloured sleeves including non-breakable, non-hygroscopic epoxy resin or glass fiber reinforced polymer insulated DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 65 KA for 1 Sec. |
| 1318 | Interlocking: |
| 1319 | Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram enclosed. |
| 1320 | Outgoings:- |
| 1321 | All Microprocessor based release ACB/MCCB of following capacity and rating, 65 KA (Ics=Icu upto 690 V) with 3 phase 4 wire dual source type Multifunction meter of class 0.5S accuracy with communication interface port RS 485 for recording VV (Between Phases and between each phase and neutral), A ( In each Phase and neutral), KVA, KW, KWhr, KVAR, pf, 64 samples/cycle, Total harmonic distortion, with suitable rating CTsetc. complete with wiring , connections etc. |
| 1322 | 2000A 65 KA 4P EDO ACB - 08 Nos |
| 1323 | 1250A 65 KA 4P EDO ACB - 03 Nos |
| 1324 | 1000/800A 65 KA 4P EDO ACB - 03 Nos |
| 1325 | 630A 65 KA 4P MCCB - 05 Nos |
| 1326 | 400A 65 KA 4P MCCB - 06 Nos |
| 1327 | Thermal magnetic based release MCCB for over current, earth fault & short circuit protection of with all indication, front operating handle & door interlock following capacity and rating, 65KA (Ics=Icu upto 433 V) with calibrated Intelligent multifunction digital panel meters of class 0.5 accuracy with communication interface port RS 485 for recording V (Between Phases and between each phase and neutral), A ( In each Phase and neutral), KVA, KW, KWhr, KVAR, pf, complete with wiring , connections etc.) |
| 1328 | 250A 65 KA 4P MCCB - 09 Nos |
| 1329 | 200A 65 KA 4P MCCB - 04 Nos |
| 1330 | 100A 65 KA 4P MCCB - 06 Nos |
| 1331 | 63A 65 KA 4P MCCB - 03 Nos |
| 1332 | Main LT Panel as mentioned above |
| 1333 | Hybrid APFC Panel |
| 1334 | Supply, Installation, testing and commissioning of HYBRID APFC Panel, 3 phase 4 wire, 415 V, 50 Hz AC System for Ambient temperature -5°C to +40°C of following capacity with passive solution of 60% capacity and active solution of 40% capacity,3Phase 4 wire Hybrid Power Factor Correction Solution (with arrangment for neutral current balance) to achieve >0.99 lag and TDDI/THDV values within IEEErecommended limits.APFC should be designed as per IS 16636 Or IEC 61921. The active section and passive section shall work in sync to give optimized output. The degree of protection of passive section should be IP 42, and of active section should be minimum IP 21.The switching device for APFC passive section should be through capacitor dutycontactor and for the active compensation system shall be IGBT based with 3 level topology having 12 IGBT in inverter circuit. The active compensation system should filter harmonics from 2nd to 50th individual harmonic order and shall be selectable forthe entire range. The active compensation system should have feature to improve PF correction and harmonic filtration having response time < 100 Micro second. The hybrid panel shall be indoor type floor mounted free standing totally enclosed, extensible, fabricated in compartmentalised designed made of CRCA sheet steel of 2.0mm thick for framework &covers, 3 mm thick for gland plate i/c cleaning & finishing complete with 9 tank process for powder coated of approved shade ( RAL 7032-Siemens grayor as approved by Engineer-in-Charge), having front section (switch gear and control accessories) and rear section (capacitor and reactor), front and rear access, having suitable current carrying capacity, extensible TPN Aluminium alloy bus bar of high conductivity, DMC/SMC bus bar supports,bottom base channel of MS Section, fabrication shall be done in transportable section, entire panel shall have common copper earth bar of minimum size of 25mm x 5mm with 2 nos. earth studs, the earth terminals provided on the body of capacitor bank shall also be bonded to the main capacitor panel earth bus with 2 nos. 8 SWG or 6 SWG GI earth wires/ equivalent size of copper conductor cable, forced ventilation for maintaining temperature rise not more than 5°C from ambient, interconnections, connections with 14% detuned reactor and heavy duty 525 V ISI marked Impregnated MPP(Metalized Polypropylene) Capacitor (IS 13340 Part -1 & 2) APFC Panel shall be in compliance with IS :16636 & CPWD Specifications etc. as per below details. |
| 1335 | Incomers |
| 1336 | Suitable capacity MCCB/ACB (Upto 300 KVAR, MCCB and above 300 KVAR, ACB ) Microprocessor base with O/C, S/C, E/L release of TPN 50KA breaking capacity (Ics=Icu), ON, OFF, Trip, R, Y, B - LED Indicating Lamp set alongwith requiredInstruments and accessories with extended rotary handel and door interlocking arrangment. Current rating of the Incomer in ampere shall be APFC Panel rating in KVAR x 1.4 x 1.5 or Nearest higher standards rating. |
| 1337 | Instruments & Indicarions |
| 1338 | Passive Sections : |
| 1339 | 3-Phase current sensing APFC microprocessor relay/controller , advance 12/16 stages (12 stages for over all capacity of panel (active + passive) below 500 KVAR and 16 stages 500 KVAR & above) and having display of Phase wise V, A, PF, Cos-Phi, KW, KVA, KVAR, THD-V , THD-I, harmonics up to 31 level. |
| 1340 | Auto Manual Selector switch, auxiliary contactors with timer for delay in manual mode. |
| 1341 | Digital Multi function meter with LED Display for v A, PF, KW, KVA, KVAR, THD-V & I, Frequency. |
| 1342 | Suitable rating control transformer shall be provided for control and indication circuit. |
| 1343 | All components like control transformer, meter, relay and indicating lamp shall be protected by using suitable rating individual MCB's. |
| 1344 | Wiring of the control circuit shall be done by using 2.5 sq mm, FRLS/HFFR 1100 V grade, PVC insulated multi stranded copper control wire. |
| 1345 | Communication Ethernet/RS485/SNMP port open protocol for BMS integration as per approved by Engineering in charge. |
| 1346 | For Active Section : Dedicated HMI (Human Machine Interface) (Minimum 7 inchdisplay) for controlling and communication and having display of Phase wise V, A, PF, Cos-Phi, KW, KVA, KVAR, THD-V , THD-I, harmonics up to 50th level. Communication Ethernet/RS485/SNMP port open protocol for BMS integration as per approved by Engineering in charge. |
| 1347 | 1000kVA |
| 1348 | DG SYNCHRONISATION PANEL (TTA AS PER IEC 61439) ( DG SET WITH PCC 3.3 CONTROLLER) |
| 1349 | Design, Manufacturing, Supply, Installation, Testing & Commissioning of DG Synchronizing Panel. The panel will be totally enclosed type with, free standing, compartmentlized, floor mounted, indoor duty - IP 42, front operated, electrical panel fabricated from 2 mm thick Sheet Steel as per EPC tender specifications and will be complete with the main and auxiliary bus bars, metering system, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. The DG Synchronizing Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have Synchronizing through PCC 3.3 controller and Load management, AMF facility & interlocking through PLC to achieve electrical interlocking, buscoupler switching, auto operation of incommer and bus coupler, auto start of D.G. Sets, auto D.G. running by pre set timing, auto changeover etc and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification. All the control system, ACB & MCCB shall be compatible for SCADA system integration for monitoring / control. The entire control wiring shall be done accordingly. |
| 1350 | Each incoming and outgoing ACB breaker will have microprocessor release (O/C, S/C & EF release with hi set) or as mentioned in BOQ. All the Breaker shall Ics=Icu=Icw=65 KA. All the ACB shall be EDO Type. |
| 1351 | All ACB in main LT Panels shall have RS845 port for communication and Ethernet Gateway Module for Energy Meter shall be connected over IP network using Din Rail Mounted Managed Ethernet Switch in such a way that all electrical panel data shall be able to be communicated to SCADA |
| 1352 | All MCCBs shall be with Microprocessor based release having inbuilt adjustable protections against Over Load (L), Short Circuit (S) and Ground Faults (G) with time delay. All MCCBs should be provided with the Rotary Operating Mechanism. The ROM should be with door interlock (with defeat feature) & padlock facility. |
| 1353 | The LV switchboards shall be as per the standards IEC 61439-1 & 2 and also the Panel shall be tested of design as per Seismic Zone 5 of IS 1893 Part -1 2002 |
| 1354 | Panel shall be rated for Impulse withstand capability 8 KV for main circuit as per IEC 61439 Clause 5.2.4 Rated impulse withstand voltage (Uimp) (of the Assembly). Main switchboard shall be form 4b, for form of separation only metallic covers shall be used |
| 1355 | All panels above 800A and above shall be design verified / TTA (IEC61439-1&2). The TTA Panel design of the Switchboard shall be proven design from the main switchgear manufacturer (OEM). |
| 1356 | The Panel design shall be type tested for Internal arc tests as per IEC 61641 for 70 KA/ 50 KA for 0.5 sec as applicable as per system design fault level at HBB, VBB and cable chamber. Copies of the test certificate of any one rating shall be submitted along with the tender. |
| 1357 | All other specification shall be as per EPC Tender document. |
| 1358 | For Incomer and important outgoing feeders comprehensive power meters shall be provided which shall display A, V, Pf , Hz ,Kw , KVA, KVAr, Kwh , Kvarh, average and maximum values , demand values , THD on current and Voltages, Individual harmonics up to 31st level.. Also add on modules for RS485 port, programmable contacts, analogue output etc. to link to SCADA system. |
| 1359 | For outgoing feeders comprehensive power meters shall be provided which shall have 3 line display A , V, Pf , Hz ,Kw , KVA, KVAr, Kwh, KVARH, RS485 port etc to link to SCADA system. |
| 1360 | INCOMING FOR 3 X 1250 DG SET |
| 1361 | 3 Nos. 1600A FP EDO Air Circuit Breaker. The ACB shall have microprocessor based releases for O/C, S/C & earth fault protection with instantaneous. |
| 1362 | 3 Sets of indicating lamps to show the incoming power along with protection SP MCB's. |
| 1363 | 3 Set of ON OFF TRIP indication lamp with protection SP MCB's. |
| 1364 | 3 Nos. Multifunction Meter with CT's. (THD, Voltage, AMP, KWH, HZ, Power, KVAR Meter) |
| 1365 | 3 Nos. Load Manager EM 6400 with RS 485 port |
| 1366 | 3 Nos. Hooter |
| 1367 | 3 Nos. Reverse Power Relay (32) |
| 1368 | 3 Nos. Announciation window to cover LLOP, HWT, OIL Pressure, U/V, O/V, U/F, O/F, O/C, E/F, REF relay faults shall be provided. 2 nos phase reversal relay shall be provided. |
| 1369 | 3 Nos Engine should trip on LLOP, HWT, oil temp, O/V, O/F and breaker should trip on other faults. |
| 1370 | Initially U/V & U/F will be bye passed till oil pressure is picked up. |
| 1371 | 3 Sets of Generator start /stop facility through push button from panel, necessary cranking relay shall be provided. |
| 1372 | 3 Nos. Suitable battery charger for 24V 360 AH with d.c voltmeter & d.c ammeter. D.C voltmeter and ammeter will be analouge type. |
| 1373 | AUTO OPERATION OF INCOMER / BUSCOUPLER ACB's. |
| 1374 | AMF, Load Management & Interlocking through PLC shall be provided. |
| 1375 | Auto start of DG Sets on grid failure & phase reversal. |
| 1376 | Auto synchronizing through PCC 3.3 D.G. set Controller of Cummins Make. |
| 1377 | Auto DG Set running by preset timing. |
| 1378 | Auto changeover. |
| 1379 | Buscoupler switching. |
| 1380 | Interlocking. |
| 1381 | Necessary hardware shall be provided to achieve above functions including micro PLC with real time clock, digital inputs/outputs, MMI with 2 line display, power supply, auxillary relays, PB's indication etc. & software for the above. |
| 1382 | Automatic system shall be user friendly and shall have manual override. |
| 1383 | Operation logic, control & interlocking scheme shall be prepared by panel manufacturer with coordination of consultants. |
| 1384 | Auto operation of Cooling Tower, Cooling Pumps to be integrated with PLC to with DG set in automatically. The points for integrate the cooling tower and pumps to be considered in PLC accordingly. Also we need 20% of spare points in PLC for future use. |
| 1385 | BUSBARS |
| 1386 | 5000 Amp TPN busbars of aluminium alloy as per SLD. |
| 1387 | OUTGOING |
| 1388 | EACH OUTGOING FEEDER SHALL HAVE PANEL MOUNTED MULTIFUNCTION METER, ON, OFF & TRIP INDICATION LAMP & PHASE INDICATION LAMP WITH PROTECTION MCB. |
| 1389 | 03 Nos. 1600 Amp FP EDO Air Circuit Breaker. |
| 1390 | BATTERY & BATTERY CHARGER |
| 1391 | 1 No. 24V, 72AH SMF Battery with suitable battery charger for PLC. |
| 1392 | 3 No. 24V suitable battery charger for D.G. Set battery charging. |
| 1393 | DG Synchronization Panel describe as above |
| 1394 | MAIN LT PANEL Hospital Block |
| 1395 | i) 1250 Amp, 4 Pole ACB - 2 set |
| 1396 | Air Circuit Breaker Horizontal drawout type of fault breaking capacity 50KA (Ics=lcu=Icw) Electrical Draw Out Motorised operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/ test/isolated position indicators and frame earthing contact, conforming to IS-13947-2 1993 as amended up-to-date complete with Independent Electrical & manualspringclosing mechanism, Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection, Shunt trip coil 24V D.C / 220V A.C, Breaker Control Switch - 16A, Test terminal block set, circuits as per standard practice, auxiliary contactors with contacts (minimum 4NO+4NC) for positive interlocking of the breakers, necessary interlocking with following accessories and suitable to receive bus duct connections. All incoming ACB shall have Load shedding and reconnection thru programmable contacts |
| 1397 | Metering, indications and protections for each incomer: |
| 1398 | a) LED indication lamps for RYB, breaker 'ON/ OFF/ TRIP', spring charged, DC control supply healthy etc. with 2Amp control MCBs. |
| 1399 | b) Set of Digital flush type multifunction meters (with RS485 port), class - 0.5 accuracy , showing V, A, PF, Hz, KW, KWH, KVAR, Individual harmonics distortion etc. with 3 Nos. cast resin current transformers of suitable ratio, 15 VA Class 0.5 metering. |
| 1400 | Bus Coupler |
| 1401 | 1 No. 1250 Amp as per design, 415V(Ics=Icu=Icw 50 KA for 1 second), 4 Pole, EDO ACB Electrical draw out type, Micro-processor based release Electrically interlocked, with all indications,push buttons etc. complete in all respects as mentioned in specifications and as required:- |
| 1402 | 1 Set of ON/Trip indicating lamps |
| 1403 | 1 No. DC under voltage trip relay |
| 1404 | Bus Bar |
| 1405 | TPN aluminium extensible type main bus bars 1600 Amp continuous rating (As per capacity of corresponding incoming / Bus couplers) , and auxilliary bus bar of suitable capacity with heat shrinkable coloured sleeves including non-breakable, non-hygroscopic epoxy resin or glass fiber reinforced polymer insulated DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of 50 KA for 1 Sec. |
| 1406 | Interlocking: |
| 1407 | Electrical Interlocking through advance contacts / contactors in MCCB/ACB's (Incomers & Bus couplers) should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram enclosed. |
| 1408 | Outgoings:- |
| 1409 | All Microprocessor based release ACB/MCCB of following capacity and rating, 50 KA (Ics=Icu upto 690 V) with 3 phase 4 wire dual source type Multifunction meter of class 0.5S accuracy with communication interface port RS 485 for recording VV (Between Phases and between each phase and neutral), A ( In each Phase and neutral), KVA, KW, KWhr, KVAR, pf, 64 samples/cycle, Total harmonic distortion, with suitable rating CTsetc. complete with wiring , connections etc. |
| 1410 | 1000A, 50KA TP+N MDO ACB – 03 Nos |
| 1411 | 400A, 50KA 4P MCCB - 04 Nos |
| 1412 | 315A, 50KA 4P MCCB - 05 Nos |
| 1413 | Thermal magnetic based release MCCB for over current, earth fault & short circuit protection of with all indication, front operating handle & door interlock following capacity and rating, 65KA (Ics=Icu upto 433 V) with calibrated Intelligent multifunction digital panel meters of class 0.5 accuracy with communication interface port RS 485 for recording V (Between Phases and between each phase and neutral), A ( In each Phase and neutral), KVA, KW, KWhr, KVAR, pf, complete with wiring , connections etc.) |
| 1414 | 160A, 35KA 4P MCCB - 10 Nos |
| 1415 | 125A, 35KA 4P MCCB - 15 Nos |
| 1416 | 100A 35 KA 4P MCCB - 9 Nos |
| 1417 | 63A 35 KA 4P MCCB - 30 Nos |
| 1418 | Main LT Panel as mentioned above |
| 1419 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 1420 | Group C |
| 1421 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 1422 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 1423 | Group C |
| 1424 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 1425 | Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 1426 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 1427 | CIRCUIT -SUBMAIN WIRING |
| 1428 | 2x1.5 sq mm + 1x1.5 sq mm earth wire |
| 1429 | 4x1.5 sq mm + 2x1.5 sq mm earth wire |
| 1430 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 1431 | 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire |
| 1432 | 2x6 sq mm + 1x6 sq mm earth wire. |
| 1433 | 4x6 sq mm + 2x6 sq mm earth wire |
| 1434 | 2x4 sq mm + 1x2.5 sq mm earth wire. |
| 1435 | 4x4 sq mm + 2x2.5 sq mm earth wire. |
| 1436 | 2x6 sq mm + 1x4sq mm earth wire. |
| 1437 | 4x6 sq mm + 2x4sq mm earth wire. |
| 1438 | PANEL TO DB SUBMAIN WIRING |
| 1439 | 2x4 sq mm + 1x2.5 sq mm earth wire. |
| 1440 | 2x6 sq. mm + 1x4 sq. mm earth wire |
| 1441 | 2x10 sq. mm + 1x6 sq. mm earth wire |
| 1442 | 4x4 sq mm + 2x2.5 sq mm earth wire |
| 1443 | 4x6 sq mm + 2x4 sq mm earth wire |
| 1444 | 4x10 sq mm + 2x6 sq mm earth wire |
| 1445 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 1446 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 1447 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 1448 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 1449 | Supplying and fixing of following sizes of medium class PVC conduit along with the accessories in surface/recess including of surface cutting the wall and making good the same in case of recessed conduit as required. |
| 1450 | 20mm dia |
| 1451 | 25mm dia |
| 1452 | 32mm dia |
| 1453 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 1454 | 5/6 amps switch |
| 1455 | 15/16 A switch |
| 1456 | 3 pin 5/6 amp socket outlet |
| 1457 | 6 pin 15/16 A socket outlet |
| 1458 | TV anteena Socket Outlet |
| 1459 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. |
| 1460 | 1 or 2 Module (75mmX75mm) - For Telephone,TV outlet & Data |
| 1461 | 3 Module (100mmX75mm) - For Socket outlet. |
| 1462 | 6 Module (200mmX75mm) - For Socket outlet. |
| 1463 | 8 Module (125 mmX125 mm) |
| 1464 | 12 Module (200 mmX150 mm) |
| 1465 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 1466 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 1467 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 1468 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 1469 | Installation testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 1470 | Upto 450 mm sweep |
| 1471 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 1472 | Supplying and fixing of following sizes of steel conduit along with the accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 1473 | 20mm dia |
| 1474 | 25mm dia |
| 1475 | 32mm dia |
| 1476 | Wiring with the following sizes of FRLS insulated copper conductor single core cables in existing surface/recessed M.S. conduit etc. as complete as required |
| 1477 | 3 x 2.5 sq.mm (For Lift Shaft) |
| 1478 | 3 x 4.0 sq.mm (For Lift Shaft) |
| 1479 | Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box. |
| 1480 | 4 way |
| 1481 | 6 way |
| 1482 | 8 way |
| 1483 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1484 | Supplying and fixing 32 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32 A \\"C\\" curve, DP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1485 | Supplying and fixing 32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1486 | Supplying and fixing 25 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 25 A \\"C\\" curve, DP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 1487 | Supplying and fixing vii. Modular Type dual USB (Universal Serial Bus) Charger Socket outlets (2 Module), 2000 mA. |
| 1488 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 1489 | 16 Way, Double Door |
| 1490 | 12 Way, Double Door |
| 1491 | 8 Way, Double Door |
| 1492 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 1493 | 6 Way (4+18), Double Door |
| 1494 | 8 Way (4+24), Double Door |
| 1495 | 12 way (4 + 36), Double door |
| 1496 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 1497 | 4 way (4 + 12), Double door |
| 1498 | 8 way Double door (4 + 24) |
| 1499 | 12 way Double door (4 + 36) |
| 1500 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C series Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc,as required. |
| 1501 | Single pole |
| 1502 | Triple pole and neutral |
| 1503 | Double pole |
| 1504 | Triple pole |
| 1505 | Supplying and fixing following rating, double pole, 240 volts, MCB complete with connections, testing and commissioning etc. as required. |
| 1506 | 40 Amp |
| 1507 | 63 Amp |
| 1508 | Supplying and fixing following rating, four pole, 415 volts, MCB complete with connections, testing and commissioning etc. as required. |
| 1509 | 40 Amp FP MCB |
| 1510 | 63 Amp FP MCB |
| 1511 | 40 Amp TP MCB |
| 1512 | 63 Amp TP MCB |
| 1513 | Supplying and fixing of following rating four pole (Three phase and neutral) 415 volts, Residual Current Breaker with Overload (RCBO), having a current sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required. |
| 1514 | 25 Amp |
| 1515 | 40 Amp |
| 1516 | 63 Amp |
| 1517 | Supplying and fixing of following rating double pole 230 volts, Residual Current Breaker with Overload (RCBO), having a current sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required. |
| 1518 | 25 Amp |
| 1519 | 40 Amp |
| 1520 | 63 Amp |
| 1521 | Supply of following sizes of 1.1KV grade multicore Aluminium conductor XLPE insulated and PVC sheathed armoured cable conforming to relevant IS (Cable shall be purchased only after approval of cable schedule by architect / consultant) |
| 1522 | 3.5 core, 400 sq. mm. Al. Armoured Cable |
| 1523 | 3.5 core, 300 sq. mm. Al. Armoured Cable |
| 1524 | 3.5 core, 240 sq. mm. Al. Armoured Cable |
| 1525 | 3.5 core, 185 sq. mm. Al. Armoured Cable |
| 1526 | 3.5 core, 150 sq. mm. Al. Armoured Cable |
| 1527 | 3.5 core, 120 sq. mm. Al. Armoured Cable |
| 1528 | 3.5 core, 95 sq. mm. Al. Armoured Cable |
| 1529 | 3.5 core, 70 sq. mm. Al. Armoured Cable |
| 1530 | 3.5 core, 50 sq. mm. Al. Armoured Cable |
| 1531 | 3.5 core, 35 sq. mm. Al. Armoured Cable |
| 1532 | 4 core, 25 sq. mm. Al. Armoured Cable |
| 1533 | 4 core, 16 sq. mm. Cu. Armoured Cable |
| 1534 | 4 core, 10 sq. mm. Cu. Armoured Cable |
| 1535 | 4 core, 6 sq. mm. Cu. Armoured Cable |
| 1536 | 4 core, 4 sq. mm. Cu. Armoured Cable |
| 1537 | 2 core, 16 sq. mm. Cu. Armoured Cable |
| 1538 | 2 core, 10 sq. mm. Cu. Armoured Cable |
| 1539 | 2 core, 6 sq. mm. Cu. Armoured Cable |
| 1540 | 2 core, 2.5 sq. mm. Cu. Armoured Cable |
| 1541 | LayingLaying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.. |
| 1542 | Upto 35 sq. mm |
| 1543 | Above 35 sq. mm and upto 95 sq. mm |
| 1544 | Above 95 sq. mm and upto 185 sq. mm |
| 1545 | Above 185 sq. mm and upto 400 sq. mm |
| 1546 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. |
| 1547 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 1548 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 1549 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 1550 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 1551 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 1552 | 2 x 16 sq. mm (19mm) |
| 1553 | 2 x 10 sq. mm (19mm) |
| 1554 | 2 x 6 sq. mm (19mm) |
| 1555 | 3 x 10 sq. mm (22mm) |
| 1556 | 3.5 X 25 sq. mm (28mm) |
| 1557 | 3½ X 35 sq. mm (32mm) |
| 1558 | 3½ X 50 sq. mm (35mm) |
| 1559 | 3½ X 70 sq. mm (38mm) |
| 1560 | 3½ X 95 sq. mm (45mm) |
| 1561 | 3½ X 120 sq. mm (45mm) |
| 1562 | 3½ X 150 sq. mm (50mm) |
| 1563 | 3½ X 185 sq. mm (57mm) |
| 1564 | 3½ X 240 sq. mm (62mm) |
| 1565 | 3½ X 300 sq. mm (70mm) |
| 1566 | 3½ X 400 sq. mm (70mm) |
| 1567 | 4 X 10 sq. mm (25mm) |
| 1568 | 4 X 16 sq. mm (28mm) |
| 1569 | 4 X 25 sq. mm (28mm) |
| 1570 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers G.I. suspenders i/c base of suitable size G.I. angle, G.I. bolts & nuts, fastner etc. as required. |
| 1571 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1572 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1573 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1574 | 450 mm wide x 50 mm depth x 2.0 mm thickness. |
| 1575 | 600 mm width X 50 mm depth X 2.0 mm thickness |
| 1576 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1577 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1578 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers G.I. suspenders i/c base of suitable size G.I. angle, G.I. bolts & nuts, fastner etc. as required. |
| 1579 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1580 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1581 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1582 | 450 mm wide x 50 mm depth x 2.0 mm thickness. |
| 1583 | 600 mm width X 50 mm depth X 2.0 mm thickness |
| 1584 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1585 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1586 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Tee\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 1587 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1588 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1589 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1590 | 450 mm wide x 50 mm depth x 2.0 mm thickness. |
| 1591 | 600 mm width X 50 mm depth X 2.0 mm thickness |
| 1592 | 750 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1593 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 1594 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers G.I. suspenders i/c base of suitable size GI angle, G.I. bolts & nuts, fastner etc. as required. |
| 1595 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1596 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1597 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 1598 | 450 mm wide x 50 mm depth x 2.0 mm thickness. |
| 1599 | 600 mm wide x 50 mm depth x 2.0 mm thickness. |
| 1600 | 750 mm wide x 75 mm depth x 2.0 mm thickness. |
| 1601 | 900 mm wide x 75 mm depth x 2.0 mm thickness. |
| 1602 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 1603 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 1604 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 1605 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 1606 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with R.C.C. collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching(75 cm deep) and refilling etc. as required. |
| 1607 | 100 mm dia. R.C.C. pipe |
| 1608 | 150 mm dia. R.C.C. pipe |
| 1609 | 250 mm dia. R.C.C. pipe |
| 1610 | 300 mm dia. R.C.C. pipe |
| 1611 | INSPECTION CHAMBER: |
| 1612 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : |
| 1613 | Inside dimensions 600x 600 mm and 45 cm deep for pipe line with three or more inlets. |
| 1614 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1615 | Extra for depth beyond 45 cm of brick masonry chamber |
| 1616 | For 600x600 mm size |
| 1617 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1618 | Inside dimensions 450x 450 mm and 45 cm deep for pipe line with three or more inlets. |
| 1619 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1620 | Extra for depth beyond 45 cm of brick masonry chamber |
| 1621 | For 450x450 mm size |
| 1622 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1623 | Inside dimensions 1200x 900 mm and 75 cm deep for pipe line with three or more inlets. |
| 1624 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1625 | Extra for depth beyond 75 cm of brick masonry chamber |
| 1626 | For 1200x900 mm size |
| 1627 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 1628 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 1629 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 1630 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 1631 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 1632 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 1633 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 1634 | Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required. |
| 1635 | LIGHTNING PROTECTION - AS PER IEC 62305 / IS IEC 62305 |
| 1636 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.(but without charcoal/ coke and salt ) as required. |
| 1637 | Supply, Installation, Testing & Commissioning of Vertical G.I. Lighting Arrester of 16 mm dia, 2000 mm long with base plate as per technical specification as complete as required. |
| 1638 | Supply, Installation, Testing & Commissioning of Vertical G.I. Lighting Arrester of 16 mm dia, 1000 mm long with base plate as per technical specification as complete as required. |
| 1639 | Supply, Installation, Testing & Commissioning of 8 mm round aluminium conductor for horizontal lightning protection run in roof as per technical specification as complete as required. |
| 1640 | Supply, Installation, Testing & Commissioning of roof conductor holder for 8 mm round aluminium conductor made of Gun Metal for horizontal installation. The distance between each holder should be min of 1.5 mtr as per technical specification as complete as required. |
| 1641 | Supply, Installation, Testing & Commissioning of T connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt as per technical specification as complete as required. |
| 1642 | Supply, Installation, Testing & Commissioning of Cross connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt as per technical specification as complete as required. |
| 1643 | Supply, Installation, Testing & Commissioning of Glue for fixing the roof conductor holder on the roof as per technical specification as complete as required. |
| 1644 | Supply, Installation, Testing & Commissioning of 8 mm round aluminium conductor as a down conductor mounted in the surface of wall which will carry the lightning current to earth pit as per technical specification as complete as required. |
| 1645 | Supply, Installation, Testing & Commissioning of Down conductor holder for 8 mm round aluminium conductor of min distance between the wall to the conductor will be of 85 mm. The distance between each holder should be min of 1.5 mtr as per technical specification as complete as required. |
| 1646 | Supply, Installation, Testing & Commissioning of Expansion piece along with connector to compensate the expansion of round 8 mm Al conductor when temperature variation . Connection should be in every 20 mtr as per technical specification as complete as required. |
| 1647 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 1648 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 1649 | Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser andconstruction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape sizeand CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . |
| 1650 | 12 - 15 watt |
| 1651 | Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector |
| 1652 | 12 - 15 watt |
| 1653 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 1654 | Powder coated die cast/ Extruded aluminium Body(Thickness ≥ 1.20mm |
| 1655 | 36 watt |
| 1656 | 40 watt |
| 1657 | 10W MIRROR LIGHTSupply, Installation, Testing & Commissioning of 2ft length, 10W LED Mirror luminaire wall mounted delivering minimum system lumen of 1000 lumens & the luminaire shall be with system efficacy 100 lm/W. The luminaire Housing shall be made of extruded aluminium & the diffuser shall be of PMMA/PC. The operating CCT shall be 6500K with CRI of ≥80, SDCM<5. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95. LED Life with L70 Criteria should be 50,000 hours. IP20 protection. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Approved make: as per specification |
| 1658 | 10W LED BULKHEADSupply, Installation, Testing & Commissioning of 10W Wall mounted LED Bulkhead Light delivering minimum system lumen of 1000 lm & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing & Rim is Pressure Die Cast Aluminium, IP65, IK10, Optics: Polycarbonate Opal high transmissive Diffuser, Ambient temp 45deg C . The operating CCT shall be 4000/5700K with CRI of ≥80. The luminaire shall be BIS Registered with electronic driver with input voltage range of 140 to 280V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs luminaire Life with L70 Criteria. Shall have minimum surge protection of 2.5KV. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard. It should have Electrical class I insulation. Dimension: 183 X 113 X 65mm, Weight: 0.45Kg..Approved make: as per specification |
| 1659 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 1660 | Powder coated die cast/ Extruded aluminium Body(Thickness ≥ 1.20mm |
| 1661 | 36 watt |
| 1662 | Supply, Installation, Testing & commissioning of Passive Infrared(PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. |
| 1663 | Supply, Installation, Testing & commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high preformance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. |
| 1664 | Supply, Installation, Testing & commissioning of Microwave technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. |
| 1665 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of 5 watt / meter LED Cove Light fitting with high efficiency electronic driver complete as required. Approved make: as per DBR specification. |
| 1666 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of 15 watt LED wall bracket Light fitting with more than 100 lumens/watt, THD less than 10%, complete as required. Approved make: as per DBR specification. |
| 1667 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 1668 | 1200 mm. |
| 1669 | Supply, Installation, Testing & Commissioning ing and fixing of 250 mm sweep decorative Fresh air fan (exhaust fan), power consumption 36W, speed not less than 1200 RPM, Air Delivery not less than 860 CMM, (PVC Body Heavy Duty) with all accessories suitable for operation single phase 230 volt 50 cycle per second per sec. AC Supply, Installation, Testing & Commissioning etc. as required. in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning earthing etc. as required. as perTechnical specification. |
| 1670 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of 1x6 watt LED Light recess mounted downlight with high efficiency electronic driver, more than 100 lumens/watt, THD less than 10%, complete as required. Approved make: as per Technical specification. |
| 1671 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of 2W LED Foot light (Night lamp for ward) on wall, as complete as required. Approved make: as per DBR specification. |
| 1672 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of wall mounted 70W LED Light including all fixing arrangement complete as required.Approved make: as per Technical specification. |
| 1673 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of Exit Signages including all fixing arrangement complete as required. |
| 1674 | Supply, Installation, Testing & Commissioning , Installation, Testing & Commissioning of 36 watt LED Bed Head Light Wall mounted light fitting with high efficiency electronic driver, more than 100 lumens/watt, THD less than 10%, complete as required. Approved make: as per Technical specification. |
| 1675 | Design, Manufacturing, Supply, Installation, Testing & Commissioning of cubicle type totally enclosed free standing / Wall mounted type moisture, dust and vermin proof compartmentlized Floor Distribution Panel made out of 2.0 mm thick of Main members & front cover 1.6 mm thick CRCA sheet complete with internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the Multi Function Meter / KWH Meter shall be with RS 485 port / SCADA or BMS Connectivity. |
| 1676 | The MCCB rating up to 250A shall have thermal megnatic based adjustable over current, short circuit protection and above 250A MCCB shall have microprocessor based adjustable over current, short circuit, earth fault protection. |
| 1677 | The MCCBs should be either 3 or 4 poles fixed type. |
| 1678 | MCCBs shall comply with standards IS/IEC 60947-1 & 2. The breaking capacity performance certificates shall be available for category A to the above mentioned standards. |
| 1679 | MCCB shall have a rated operational voltage (Ue) of 415V, insulation voltage (Ui) of 750 V (AC 50/60 Hz) & impulse voltage (Uimp) of not less than 8kV. |
| 1680 | The electrical life of MCCBs shall be 8,000 operations up to 250A & 4000 operations up to 630A. |
| 1681 | All MCCBs upto 250A shall be thermal magnetic type with adjustable overload settings from 0.8 to 1 times In and adjustable magnetic settings. |
| 1682 | All MCCBs above 250A upto 630A shall be self-powered microprocessor based type having adjustable O/L, S/C & inbuilt Earth Fault protections. |
| 1683 | In case of 4 pole microprocessor based MCCBs neutral shall be protected & adjustable as a Neutral unprotected / Neutral protected at 0.5 In/ Neutral protected at In. |
| 1684 | In case of 3 Phase 4 Wire Systems, if 3 Pole MCCBs are specified then Vendor should provide Neutral CT from MCCB Manufacturer. |
| 1685 | For Motor application, motor duty type MCCBs shall be selected with reference to Type 2 coordination chart provided by the manufacturer. |
| 1686 | All MCCBs shall have Phase Barriers & Extended Rotary Operating Handles. The Rotary operating mechanism shall be of robust design and should be with door interlock & padlock facility. |
| 1687 | All MCCBs above 63A shall be provided with Silver Plated Copper Spreader Links for enhancing termination capacity |
| 1688 | Miniature circuit breakers shall be of approved design and make and must be tested and validated as per IS/IEC 60898 and IEC 60947-2 standards. |
| 1689 | MCBs shall ensure complete electrical Isolation of downstream circuit or equipment, when the MCB is switched OFF. |
| 1690 | Energy Limitation Class-3 shall be to ensure minimum let through energy in the event of a fault, for safety & longevity of downstream circuit equipment. (to be mentioned on the as per standards ) |
| 1691 | All the ATS shall be as per technical specification. |
| 1692 | MEDICAL EQUIPMENT PANEL, (HOSPITAL BLOCK) |
| 1693 | INCOMING |
| 1694 | 02 Nos. 630 Amp FP Moulded Case Circuit Breaker. |
| 1695 | 02 No. Digital MFM Meter, CT's control MCB. |
| 1696 | 02 Set of phase indicating lamps with Single Pole MCB. |
| 1697 | 02 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1698 | 2 Set Surge Protective Devices |
| 1699 | BUSCOUPLER |
| 1700 | 01 Nos. 630 Amp FP Moulded Case Circuit Breaker. |
| 1701 | BUS BARS |
| 1702 | 800 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1703 | OUTGOING |
| 1704 | 02 Nos. 630 Amp FP Moulded Case Circuit Breaker. |
| 1705 | 01 Nos. 400 Amp FP Moulded Case Circuit Breaker. |
| 1706 | 04 Nos.315 Amp FP Moulded Case Circuit Breaker. |
| 1707 | 01 Nos. 160 Amp FP Moulded Case Circuit Breaker. |
| 1708 | 01 Nos. 63 Amp FP Moulded Case Circuit Breaker. |
| 1709 | 15 Nos. 63 Amp FP Miniature Circuit Breaker. |
| 1710 | Panel described as above |
| 1711 | MAIN UPS PANEL, (HOSPITAL BLOCK) |
| 1712 | INCOMING |
| 1713 | 02 Nos. 315 Amp FP Moulded Case Circuit Breaker. |
| 1714 | 03 No. Digital MFM Meter, CT's control MCB. |
| 1715 | 03 Set of phase indicating lamps with Single Pole MCB. |
| 1716 | 03 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1717 | 03 Set Surge Protective Devices |
| 1718 | BUS BARS |
| 1719 | 1000 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1720 | OUTGOING |
| 1721 | 02 Nos. 500 Amp FP Moulded Case Circuit Breaker. |
| 1722 | 01 Nos. 200 Amp FP Moulded Case Circuit Breaker. |
| 1723 | 01 Nos. 160 Amp FP Moulded Case Circuit Breaker. |
| 1724 | Panel described as above |
| 1725 | OT UPS PANEL- (HOSPITAL BLOCK) |
| 1726 | INCOMING |
| 1727 | 01 Nos. 63 Amp FP Moulded Case Circuit Breaker. |
| 1728 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1729 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1730 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1731 | 01 Set Surge Protective Devices |
| 1732 | BUS BARS |
| 1733 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1734 | OUTGOING |
| 1735 | 03 Nos. 40/63 Amp DP Miniature Circuit Breaker. |
| 1736 | Note:-OT panel will be finalized by OT vender. |
| 1737 | Panel described as above |
| 1738 | UPS PANEL-1 - (HOSPITAL BLOCK, LEFT SIDE) |
| 1739 | INCOMING |
| 1740 | 01 Nos. 100 Amp FP Moulded Case Circuit Breaker. |
| 1741 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1742 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1743 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1744 | 01 Set Surge Protective Devices |
| 1745 | BUS BARS |
| 1746 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1747 | OUTGOING |
| 1748 | 02 Nos. 63 Amp FP Miniature Circuit Breaker. |
| 1749 | 01 Nos. 40 Amp FP Miniature Circuit Breaker. |
| 1750 | 02 Nos. 63 Amp DP Miniature Circuit Breaker. |
| 1751 | 05 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1752 | Panel described as above |
| 1753 | UPS PANEL-2 - (HOSPITAL BLOCK, LEFT SIDE) |
| 1754 | INCOMING |
| 1755 | 01 Nos. 63 Amp FP Moulded Case Circuit Breaker. |
| 1756 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1757 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1758 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1759 | 01 Set Surge Protective Devices |
| 1760 | BUS BARS |
| 1761 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1762 | OUTGOING |
| 1763 | 02 Nos. 40 Amp FP Miniature Circuit Breaker. |
| 1764 | 02 Nos. 63 Amp DP Miniature Circuit Breaker. |
| 1765 | 01 Nos. 40 Amp DP Miniature Circuit Breaker. |
| 1766 | 04 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1767 | Panel described as above |
| 1768 | UPS PANEL-RESIDENCE & ADMIN BLOCK |
| 1769 | INCOMING |
| 1770 | 01 Nos. 40 Amp FP Moulded Case Circuit Breaker. |
| 1771 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1772 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1773 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1774 | 01 Set Surge Protective Devices |
| 1775 | BUS BARS |
| 1776 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1777 | OUTGOING |
| 1778 | 05 Nos. 40 Amp DP Miniature Circuit Breaker. |
| 1779 | 03 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1780 | Panel described as above |
| 1781 | LIGHT PANEL-1 (HOSPITAL BLOCK, LEFT SIDE) |
| 1782 | INCOMING |
| 1783 | 01 Nos. 63 Amp FP Moulded Case Circuit Breaker. |
| 1784 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1785 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1786 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1787 | 01 Set Surge Protective Devices |
| 1788 | BUS BARS |
| 1789 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1790 | OUTGOING |
| 1791 | 06 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1792 | Panel described as above |
| 1793 | LIGHT PANEL-2 (HOSPITAL BLOCK, LEFT SIDE) |
| 1794 | INCOMING |
| 1795 | 01 Nos. 63 Amp FP Moulded Case Circuit Breaker. |
| 1796 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1797 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1798 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1799 | 01 Set Surge Protective Devices |
| 1800 | BUS BARS |
| 1801 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1802 | OUTGOING |
| 1803 | 05 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1804 | Panel described as above |
| 1805 | LIGHT PANEL-3 (HOSPITAL BLOCK, ADMIN BLOCK) |
| 1806 | INCOMING |
| 1807 | 01 Nos.63 Amp FP Moulded Case Circuit Breaker. |
| 1808 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1809 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1810 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1811 | 01 Set Surge Protective Devices |
| 1812 | BUS BARS |
| 1813 | 100 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1814 | OUTGOING |
| 1815 | 02 Nos. 40 Amp DP Miniature Circuit Breaker. |
| 1816 | 04 Nos. 25 Amp DP Miniature Circuit Breaker. |
| 1817 | Panel described as above |
| 1818 | POWER PANEL-1 (HOSPITAL BLOCK, LEFT SIDE) |
| 1819 | INCOMING |
| 1820 | 01 Nos. 160 Amp FP Moulded Case Circuit Breaker. |
| 1821 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1822 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1823 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1824 | 01 Set Surge Protective Devices |
| 1825 | BUS BARS |
| 1826 | 200 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1827 | OUTGOING |
| 1828 | 09 Nos. 63 Amp FP Miniature Circuit Breaker. |
| 1829 | Panel described as above |
| 1830 | POWER PANEL-2 (HOSPITAL BLOCK, LEFT SIDE) |
| 1831 | INCOMING |
| 1832 | 01 Nos. 125 Amp FP Moulded Case Circuit Breaker. |
| 1833 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1834 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1835 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1836 | 01 Set Surge Protective Devices |
| 1837 | BUS BARS |
| 1838 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1839 | OUTGOING |
| 1840 | 06 Nos. 63 Amp FP Miniature Circuit Breaker. |
| 1841 | Panel described as above |
| 1842 | POWER PANEL-3 (HOSPITAL BLOCK, ADMIN) |
| 1843 | INCOMING |
| 1844 | 01 Nos. 100 Amp FP Moulded Case Circuit Breaker. |
| 1845 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1846 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1847 | 01 Set of ON / OFF indicating lamps with Single Pole MCB. |
| 1848 | 01 Set Surge Protective Devices |
| 1849 | BUS BARS |
| 1850 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1851 | OUTGOING |
| 1852 | 02 Nos. 63 Amp FP Miniature Circuit Breaker. |
| 1853 | 01 Nos. 40 Amp FP Miniature Circuit Breaker. |
| 1854 | Panel described as above |
| 1855 | LIFT PANEL(HOSPITAL BLOCK & Residence) |
| 1856 | INCOMING |
| 1857 | 01 No. 125Amp Auto Transfer Switch (ATS) |
| 1858 | 01 No. 125 Amp FP Moulded Case Circuit Breaker. |
| 1859 | 01 No. Digital MFM Meter, CT's control MCB. |
| 1860 | 01 Set of phase indicating lamps with Single Pole MCB. |
| 1861 | 01 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1862 | 01 Set Surge Protective Devices |
| 1863 | BUS BARS |
| 1864 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1865 | OUTGOING |
| 1866 | 05 Nos. 63 Amp FP RCBO with KWH Meter. |
| 1867 | 01 Nos. 63 Amp FP RCBO |
| 1868 | 05 Nos. 63 Amp DP Miniature Circuit Breaker. |
| 1869 | Panel described as above |
| 1870 | ELECTRICAL KITCHEN PANEL-01 |
| 1871 | INCOMING |
| 1872 | 1 No. 400 Amp FP Moulded Case Circuit Breaker. |
| 1873 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1874 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1875 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1876 | 1 Set Surge Protective Devices |
| 1877 | BUS BARS |
| 1878 | 500 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1879 | OUTGOING |
| 1880 | 04 No. 63 Amp FP Miniature Circuit Breaker. |
| 1881 | 03 No. 40 Amp FP Miniature Circuit Breaker. |
| 1882 | 02 No. 32 Amp FP Miniature Circuit Breaker. |
| 1883 | 02 No. 63 Amp DP Miniature Circuit Breaker. |
| 1884 | 03 No. 40 Amp DP Miniature Circuit Breaker. |
| 1885 | 01 No. 25 Amp DP Miniature Circuit Breaker. |
| 1886 | Note:- kitchen panel shall be finalized after kitchen equipment. |
| 1887 | Panel described as above |
| 1888 | ELECTRICAL MGPS PANEL & CSSD-02 |
| 1889 | INCOMING |
| 1890 | 1 No. 250 Amp FP Moulded Case Circuit Breaker. |
| 1891 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1892 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1893 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1894 | 1 Set Surge Protective Devices |
| 1895 | BUS BARS |
| 1896 | 300 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1897 | OUTGOING |
| 1898 | 04 No. 63 Amp FP Miniature Circuit Breaker. |
| 1899 | 01 No. 40 Amp FP Miniature Circuit Breaker. |
| 1900 | 01 No. 32 Amp FP Miniature Circuit Breaker. |
| 1901 | 01 No. 63 Amp DP Miniature Circuit Breaker. |
| 1902 | 04 No. 40 Amp DP Miniature Circuit Breaker. |
| 1903 | 01 No. 25 Amp DP Miniature Circuit Breaker. |
| 1904 | Note:- MGPS panel shall be finalized after MGPS equipment. |
| 1905 | Panel described as above |
| 1906 | ELECTRICAL PANEL-1 (BMW ) |
| 1907 | INCOMING |
| 1908 | 1 No. 100 Amp FP Moulded Case Circuit Breaker. |
| 1909 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1910 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1911 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1912 | 1 Set Surge Protective Devices |
| 1913 | BUS BARS |
| 1914 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1915 | OUTGOING |
| 1916 | 01 No. 40 Amp FP Miniature Circuit Breaker. |
| 1917 | 03 No. 32 Amp FP Miniature Circuit Breaker. |
| 1918 | 02 No. 32 Amp TPN Miniature Circuit Breaker. |
| 1919 | 01 No. 63 Amp DP Miniature Circuit Breaker. |
| 1920 | 01 No. 25 Amp DP Miniature Circuit Breaker. |
| 1921 | Panel described as above |
| 1922 | ELECTRICAL PANEL-1 (MORTUARY) |
| 1923 | INCOMING |
| 1924 | 1 No. 100 Amp FP Moulded Case Circuit Breaker. |
| 1925 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1926 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1927 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1928 | 1 Set Surge Protective Devices |
| 1929 | BUS BARS |
| 1930 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1931 | OUTGOING |
| 1932 | 01 No. 63 Amp FP Moulded Case Circuit Breaker. |
| 1933 | 01 No. 63 Amp FP Miniature Circuit Breaker. |
| 1934 | 03 No. 40 Amp FP Miniature Circuit Breaker. |
| 1935 | 01 No. 40 Amp DP Miniature Circuit Breaker. |
| 1936 | 13 No. 32 Amp DP Miniature Circuit Breaker. |
| 1937 | Panel described as above |
| 1938 | ELECTRICAL PANEL(TYPE-III) |
| 1939 | INCOMING |
| 1940 | 1 No. 630 Amp FP Moulded Case Circuit Breaker. |
| 1941 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1942 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1943 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1944 | 1 Set Surge Protective Devices |
| 1945 | BUS BARS |
| 1946 | 400 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1947 | OUTGOING |
| 1948 | 01 No. 630 Amp FP Moulded Case Circuit Breaker. |
| 1949 | 03 No. 100Amp FP Moulded Case Circuit Breaker. |
| 1950 | 02 Nos. 63Amp FP Miniature Circuit Breaker. |
| 1951 | 02 Nos. 40Amp DP Miniature Circuit Breaker. |
| 1952 | Panel described as above |
| 1953 | METER BOARD-( TYPE-III) |
| 1954 | INCOMING |
| 1955 | 1 No. 100 Amp FP Moulded Case Circuit Breaker. |
| 1956 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1957 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1958 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1959 | 1 Set Surge Protective Devices |
| 1960 | BUSBAR |
| 1961 | 150 Amp TPN aluminium busbar with coloured heat shrinkable sleeve. |
| 1962 | OUTGOING |
| 1963 | 04 Nos. 40 Amp FP Miniature Circuit Breaker with Dual Source Energy Meter with current Limiter. |
| 1964 | Meter Board described as above |
| 1965 | Supplying, installing by suspension on ceiling/along the wall,testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos. aluminium bus bars having current density of 130 A/ sq. cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every meter, adopter box and copper flexible for joints, continuous earthing with 2 Nos. aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. |
| 1966 | 630 A |
| 1967 | 1000 A |
| 1968 | Supplying, installation, testing & commisioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. |
| 1969 | 630 A |
| 1970 | 1000 A |
| 1971 | Supplying, installation, testing & commisioning of following capacity Plug In/ tap off box on the existing Air Insulated CompType bus trunking/ rising mains for use on 3 phase 4 wire 415 V, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB (but without MCCB) complete etc. as required. |
| 1972 | 125 A, Isc = 15 kA for 1 second (For 100A, 63A, 80A & 40A Tap off) |
| 1973 | 200 A 25kA SC for 1 sec (including 160 A) |
| 1974 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (with VTPNDB - Incammer) |
| 1975 | 100 A, 30 KA,FP MCCB (using for both 100A, 63A, 80A & 40A) |
| 1976 | 125 A, 36 KA,FP MCCB |
| 1977 | 200 A, 36 KA,FP MCCB(including 160 A) |
| 1978 | EXTERNAL LIGHTING PANEL-1 (OUTDOOR TYPE)- |
| 1979 | Supply, Installation, Testing & Commissioning of fidder pillar type totally enclosed free standing type moisture, dust, vermin & weather proof (IP-55) Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting, MS Stand, RCC foundation etc complete as per specification & drawing. |
| 1980 | INCOMING |
| 1981 | 1 No. 63 Amp FP Moulded Case Circuit Breaker. |
| 1982 | 1 No. Digital MFM Meter, CT's control MCB. |
| 1983 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 1984 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 1985 | 1 Set Surge Protective Devices |
| 1986 | 1 Set 24 Hrs TSQ Timer |
| 1987 | 1 Set 63 Amp, FP Contactor & A/M switch and Push Button. |
| 1988 | 1 Set controller for BMS Connectivity |
| 1989 | BUS BARS |
| 1990 | 100 Amp FP aluminium busbar. |
| 1991 | OUTGOING |
| 1992 | 03 No. 32 Amp TPN MCB. |
| 1993 | 09 No. 25 Amp TPN MCB. |
| 1994 | 02 No. 32 Amp TPN MCB. |
| 1995 | Panel described as above |
| 1996 | EV CHARGING PANEL-1&2 (OUTDOOR TYPE) |
| 1997 | Supply, Installation, Testing & Commissioning of fidder pillar type totally enclosed free standing type moisture, dust, vermin & weather proof (IP-55) Floor Distribution Panel made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting, MS Stand, RCC foundation etc complete as per specification & drawing. |
| 1998 | INCOMING |
| 1999 | 1 No. 400 Amp FP Moulded Case Circuit Breaker. |
| 2000 | 1 No. Digital MFM Meter, CT's control MCB. |
| 2001 | 1 Set of phase indicating lamps with Single Pole MCB. |
| 2002 | 1 Set of ON / OFF / Trip indicating lamps with Single Pole MCB. |
| 2003 | 1 Set Surge Protective Devices |
| 2004 | BUS BARS |
| 2005 | 500 Amp FP aluminium busbar. |
| 2006 | OUTGOING |
| 2007 | 4 No.160 Amp FP Moulded Case Circuit Breaker. |
| 2008 | Panel described as above |
| 2009 | Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KVsurge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be |
| 2010 | a Voltage and Frequency Independent (VFI)-type UPS. Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display / LED) to display : a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery Voltage, Capacity. e) Load: KVA, KW, Percentage. f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc |
| 2011 | THD(i) shall be less than 3% in the entire loading range. |
| 2012 | UPS shall carry design output at 40 deg. |
| 2013 | Shall have soft start and hold of for incoming supply. |
| 2014 | Invertor capability to supply 150% load for 60 sec. |
| 2015 | Three Phase Input and Three Phase Output. (Input - 340V - 470V, Three Phase, 4 wire. / Output - 400-415 Volt, Three Phase, 4 Wire.) |
| 2016 | Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. |
| 2017 | Battery shall be external type with rack and suitable for 30 minute backup on 100% load. |
| 2018 | UPS shall be compatible for minimum 4 nos unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. |
| 2019 | Suitable size cable from UPS to battery bank. |
| 2020 | 200KVA (Each Power module shall be < 50 KVA) |
| 2021 | 10KVA (Each Power module shall be < 10 KVA) |
| 2022 | Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short |
| 2023 | circuit, battery deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc |
| 2024 | THD(i) shall be less than 3% in the entire loading range. |
| 2025 | UPS shall carry design output at 40 deg. |
| 2026 | Shall have soft start and hold of for incoming supply. |
| 2027 | Invertor capability to supply 150% load for 5 sec. |
| 2028 | Single Phase Input and Single Phase Output. (Input - 200V - 220V, Single Phase, 2 wire. / Output - 200-230 Volt, Single Phase, 2 Wire.) |
| 2029 | Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. |
| 2030 | Battery shall be external type with rack and suitable for 30 minute backup on 100% load. |
| 2031 | Suitable size cable from UPS to battery bank. |
| 2032 | 3 kVA |
| 2033 | SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM |
| 2034 | Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. |
| 2035 | a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate. |
| 2036 | b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232. |
| 2037 | c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided. |
| 2038 | d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices. |
| 2039 | e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc. |
| 2040 | f) Lightning, surge voltage protection, earthing protection and grid islanding. |
| 2041 | g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required. |
| 2042 | h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. |
| 2043 | PASSENGER CUM BED LIFT (HOSPITAL BLOCK) |
| 2044 | Supplying, Installation, Testing & Commissioning of 26 Passenger Cum Bed (1768 Kg) Lifts (Gearless), with Machine Room less having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- |
| 2045 | Speed --> 1.5 MPS |
| 2046 | Floors -->B+LG+G+7 |
| 2047 | Travel --> 42 Mtrs Approx. |
| 2048 | Stops & door opening --> 9/2 panel telescopic opening with 1200mm x 2100mm clear |
| 2049 | Controller: A.C. variable voltage & variable frequency drive. |
| 2050 | The apparatus shall be designed to operate on 415 +10% - 20% Volts, 3 Phase, 4 wires, 50 Hz A.C. Supply for illumination signal equipment shall be 240 Volts single phase 50Hz A.C. |
| 2051 | Automatic rescue device complete with dry maintenance free batteries as required. Automatic Rescue Device shall have suitable battery backup so that it can operate minimum seven times in a day provided the duration between usage is at least 30 minutes. |
| 2052 | A solid state siren type alarm unit operated by 2 Nos. 9 volt rechargeable Nickel Cadmium batteries shall be provided which shall give a waxing and waning siren when alarm bell in the car is pressed momentarily. An emergency light unit using a 9 volt dry battery power pack and incandescent lamp with stainless steel face plate shall be provided inside the car which shall operate automatically in the case of power failure. |
| 2053 | Interphone shall have one master unit in each machine room, one master unit on the ground floor for each 1 (outside hoist way) and one slave unit in each elevator car. |
| 2054 | A reverse phase relay shall be provided on the controller which is designed to protect the lift equipment against phase reversal and phase failure. |
| 2055 | The lift shall be provided with floor announcement system with volume control. |
| 2056 | Operation: Microprocessor based single automatic push button / Triplex selective collective with / without attendant. |
| 2057 | Type of doors |
| 2058 | (i) Car Power operated, Two Speed Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2059 | (ii) Landing doors : Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2060 | Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. |
| 2061 | The Lift shall be provided with Brail System. |
| 2062 | Ceiling as per manufacturer's standards with Fan & LED Lights. |
| 2063 | On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. |
| 2064 | IP based CCTV interfaced to be provided inside the lift car |
| 2065 | 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. |
| 2066 | All the doors shall have the Full height infra-red curtain for safety. |
| 2067 | Emergency Alarm, Overload Warning, Auto Light/Fan Cutoff, Door Open / Door Close, ARD operation indication in car, Emergency Alarm Button, Fire Man control, Over load detection device, Attendance operation, out of service mode shall be provided. |
| 2068 | Lift Car Flooring - 20mm granite shall be required for flooring. |
| 2069 | stracher guard should be provided inside Lift and shall be complience with NIT & techspax |
| 2070 | Lift described as above |
| 2071 | PASSENGER LIFT (HOSPITAL BLOCK) |
| 2072 | Supplying, Installation, Testing & Commissioning of 13 Passenger (884 Kg) Lifts (Gearless), with Machine Room less having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- |
| 2073 | Speed --> 1.5 MPS |
| 2074 | Floors --> LG+G+7 |
| 2075 | Travel --> 38 Mtrs Approx. |
| 2076 | Stops & door opening --> 9/COPD with clear opening 1000mm x 2100mm |
| 2077 | Controller: A.C. variable voltage & variable frequency drive. |
| 2078 | The apparatus shall be designed to operate on 415 +10% - 20% Volts, 3 Phase, 4 wires, 50 Hz A.C. Supply for illumination signal equipment shall be 240 Volts single phase 50Hz A.C. |
| 2079 | Automatic rescue device complete with dry maintenance free batteries as required. Automatic Rescue Device shall have suitable battery backup so that it can operate minimum seven times in a day provided the duration between usage is at least 30 minutes. |
| 2080 | A solid state siren type alarm unit operated by 2 Nos. 9 volt rechargeable Nickel Cadmium batteries shall be provided which shall give a waxing and waning siren when alarm bell in the car is pressed momentarily. An emergency light unit using a 9 volt dry battery power pack and incandescent lamp with stainless steel face plate shall be provided inside the car which shall operate automatically in the case of power failure. |
| 2081 | Interphone shall have one master unit in each machine room, one master unit on the ground floor for each 1 (outside hoist way) and one slave unit in each elevator car. |
| 2082 | A reverse phase relay shall be provided on the controller which is designed to protect the lift equipment against phase reversal and phase failure. |
| 2083 | The lift shall be provided with floor announcement system with volume control. |
| 2084 | Operation: Microprocessor based single automatic push button / Triplex selective collective with / without attendant. |
| 2085 | Type of doors |
| 2086 | (i) Car Power operated, Two Speed Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2087 | (ii) Landing doors : Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2088 | Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. |
| 2089 | The Lift shall be provided with Brail System. |
| 2090 | Ceiling as per manufacturer's standards with Fan & LED Lights. |
| 2091 | On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. |
| 2092 | IP based CCTV interfaced to be provided Inside the car |
| 2093 | 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. |
| 2094 | All the doors shall have the Full height infra-red curtain for safety. |
| 2095 | Emergency Alarm, Overload Warning, Auto Light/Fan Cutoff, Door Open / Door Close, ARD operation indication in car, Emergency Alarm Button, Fire Man control, Over load detection device, Attendance operation, out of service mode shall be provided. |
| 2096 | Lift Car Flooring - 20mm granite shall be required for flooring. |
| 2097 | Lift shall be complience with NIT & DBR. |
| 2098 | Lift described as above |
| 2099 | PASSENGER LIFT(HOSPITAL BLOCK) |
| 2100 | Supplying, Installation, Testing & Commissioning of 10 Passenger (680 Kg) Lifts (Gearless), with Machine Room less having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- |
| 2101 | Speed --> 1.5 MPS |
| 2102 | Floors --> B+LG+G+5 |
| 2103 | Travel --> 32 Mtrs Approx. |
| 2104 | Stops & door opening --> 8/COPD with clear opening 800mm x 2100mm |
| 2105 | Controller: A.C. variable voltage & variable frequency drive. |
| 2106 | The apparatus shall be designed to operate on 415 +10% - 20% Volts, 3 Phase, 4 wires, 50 Hz A.C. Supply for illumination signal equipment shall be 240 Volts single phase 50Hz A.C. |
| 2107 | Automatic rescue device complete with dry maintenance free batteries as required. Automatic Rescue Device shall have suitable battery backup so that it can operate minimum seven times in a day provided the duration between usage is at least 30 minutes. |
| 2108 | A solid state siren type alarm unit operated by 2 Nos. 9 volt rechargeable Nickel Cadmium batteries shall be provided which shall give a waxing and waning siren when alarm bell in the car is pressed momentarily. An emergency light unit using a 9 volt dry battery power pack and incandescent lamp with stainless steel face plate shall be provided inside the car which shall operate automatically in the case of power failure. |
| 2109 | Interphone shall have one master unit in each machine room, one master unit on the ground floor for each 1 (outside hoist way) and one slave unit in each elevator car. |
| 2110 | A reverse phase relay shall be provided on the controller which is designed to protect the lift equipment against phase reversal and phase failure. |
| 2111 | The lift shall be provided with floor announcement system with volume control. |
| 2112 | Operation: Microprocessor based single automatic push button / Triplex selective collective with / without attendant. |
| 2113 | Type of doors |
| 2114 | (i) Car Power operated, Two Speed Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2115 | (ii) Landing doors : Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2116 | Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. |
| 2117 | The Lift shall be provided with Brail System. |
| 2118 | Ceiling as per manufacturer's standards with Fan & LED Lights. |
| 2119 | On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. |
| 2120 | IP based CCTV interfaced to be provided Inside the car |
| 2121 | 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. |
| 2122 | All the doors shall have the Full height infra-red curtain for safety. |
| 2123 | Emergency Alarm, Overload Warning, Auto Light/Fan Cutoff, Door Open / Door Close, ARD operation indication in car, Emergency Alarm Button, Fire Man control, Over load detection device, Attendance operation, out of service mode shall be provided. |
| 2124 | Lift Car Flooring - 20mm granite shall be required for flooring. |
| 2125 | Lift shall be complience with NIT & DBR. |
| 2126 | Lift described as above |
| 2127 | PASSENGER LIFT (TYPE-III) |
| 2128 | Supplying, Installation, Testing & Commissioning of 16 Passenger Cum Bed (1088 Kg) Lifts (Gearless), with Machine Room less having contract speed of 1.0 MPS serving different floors in the lift shaft as per detailed specifications enclosed and as under:- |
| 2129 | Speed --> 1.5 MPS |
| 2130 | Floors --> G+4 |
| 2131 | Travel --> 20 Mtrs Approx. |
| 2132 | Stops & door opening --> 6/COPD with 1000mm x 2100mm clear |
| 2133 | Controller: A.C. variable voltage & variable frequency drive. |
| 2134 | The apparatus shall be designed to operate on 415 +10% - 20% Volts, 3 Phase, 4 wires, 50 Hz A.C. Supply for illumination signal equipment shall be 240 Volts single phase 50Hz A.C. |
| 2135 | Automatic rescue device complete with dry maintenance free batteries as required. Automatic Rescue Device shall have suitable battery backup so that it can operate minimum seven times in a day provided the duration between usage is at least 30 minutes. |
| 2136 | A solid state siren type alarm unit operated by 2 Nos. 9 volt rechargeable Nickel Cadmium batteries shall be provided which shall give a waxing and waning siren when alarm bell in the car is pressed momentarily. An emergency light unit using a 9 volt dry battery power pack and incandescent lamp with stainless steel face plate shall be provided inside the car which shall operate automatically in the case of power failure. |
| 2137 | Interphone shall have one master unit in each machine room, one master unit on the ground floor for each 1 (outside hoist way) and one slave unit in each elevator car. |
| 2138 | A reverse phase relay shall be provided on the controller which is designed to protect the lift equipment against phase reversal and phase failure. |
| 2139 | The lift shall be provided with floor announcement system with volume control. |
| 2140 | Operation: Microprocessor based single automatic push button / Triplex selective collective with / without attendant. |
| 2141 | Type of doors |
| 2142 | (i) Car Power operated, Two Speed Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2143 | (ii) Landing doors : Stainless Steel in Moon Rock finish. (SS 304 Grade). |
| 2144 | Hand rail not less than 600mm long at 900mm above floor level to be fixed on all the three sides adjacent to control panel in the lift car. |
| 2145 | The Lift shall be provided with Brail System. |
| 2146 | Ceiling as per manufacturer's standards with Fan & LED Lights. |
| 2147 | On each Landing outside the lift, a steel plate with illumination sign shall be provided with written on it:- DO NOT USE LIFT IN CASE OF FIRE. Fire man switch at ground floor to be provided. Interlocking provision with Fire detection system shall be provided. |
| 2148 | IP based CCTV interfaced to be provided Inside the car |
| 2149 | 2 Hour Fire rated door. Manufacturer shall be submit the certificate alongwith supply of material from NABL approved Lab. |
| 2150 | All the doors shall have the Full height infra-red curtain for safety. |
| 2151 | Emergency Alarm, Overload Warning, Auto Light/Fan Cutoff, Door Open / Door Close, ARD operation indication in car, Emergency Alarm Button, Fire Man control, Over load detection device, Attendance operation, out of service mode shall be provided. |
| 2152 | Lift Car Flooring - 20mm Granite shall be required for flooring. |
| 2153 | Lift shall be complience with NIT & DBR. |
| 2154 | Lift described as above |
| 2155 | STRUCTURED CABLING SYSTEM PASSIVE |
| 2156 | Supply, Installation, Testing and Commissioning of 12 cores - Outside Plant Fiber Cable, Single mode (OS2), Single Jacket, Single CST Armour, Gel-free, Zero Water Peak Fiber, ITU-T G.652.D, ITU-T G.657.A1, Stranded loose tube construction, MDPE UV stabilized sheath. Water swellable tape protection and rip cords in design. Compliant to ANSI/ICEA S-87-640, EN 187105 and Telcordia GR-20. Cable OD 11.5 mm, Tensile load 2700N, Crush 44N/m. |
| 2157 | Supply, Installation, Testing and Commissioning of 6 cores - Outside Plant Fiber Cable, Single mode (OS2), Single Jacket, Single CST Armour, Gel-free, Zero Water Peak Fiber, ITU-T G.652.D, ITU-T G.657.A1, Stranded loose tube construction, MDPE UV stabilized sheath. Water swellable tape protection and rip cords in design. Compliant to ANSI/ICEA S-87-640, EN 187105 and Telcordia GR-20. Cable OD 11.5 mm, Tensile load 2700N, Crush 44N/m. |
| 2158 | Supply, Installation, Testing and Commissioning of 6 cores Indoor type Bend-Insensitive Multimode Fiber, TIA-492AAAC (OM3), Riser Distribution Cable, 50/125/900 micron unarmored construction, compliant to ANSI/ICEA S-83-596 and Telcordia GR-409, tested as per IEC 60332-3, IEC 60754-2, IEC 61034-2, IEEE 383, UL 1666, LSZH jacket, Cable OD 6.07mm, Vertical rise 500m, Tensile load 667N. |
| 2159 | Supply, Installation, Testing and Commissioning of Single Mode 12 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required. |
| 2160 | Supply, Installation, Testing and Commissioning of Single Mode 24 port loaded LIU for with LC adaptor plates , pigtel cables for core switch to access switch connectivity over fiber. |
| 2161 | Supply, Installation, Testing and Commissioning of LC – LC Single mode 1.6mm Duplex LSZH Patch Cords, OS2, zero water peak, G.652.D, G.657.A1, IEC 60332-3, UL 1666 compliant, NEC OFNR-LS (ETL) and c(ETL), Insertion Loss <0.20dB; Return Loss >55.0dB, 3 Mtr. |
| 2162 | Supply, Installation, Testing and Commissioning of Multi Mode 12 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required. |
| 2163 | Supply, Installation, Testing and Commissioning of Multi Mode 24 port loaded LIU for with LC adaptor plates , pigtel cables for core switch to access switch connectivity over fiber. |
| 2164 | Supply, Installation, Testing and Commissioning of LC – LC Multi mode 1.6mm Duplex LSZH Patch Cords, OM3, 3 Mtr. |
| 2165 | Supply, Installation, Testing and Commissioning of Category 6A U/UTP 23 AWG Cable, ETL Verified, LSZH jacket, IEC 60332-3-22, IEC 61034-2, 4 pair. Shall be certified by Intertek under 4 connector channel performance for both long channel (100mtr) and short channel (15mtr) as per ANSI/TIA 568-C.2 for CAT6A. Cables should have TRACKING Number to check the genuineness/ details of the test reports. |
| 2166 | Supply, Installation, Testing and Commissioning of Category 6A U/UTP Information Outlets, ETL, 1.5A current rated, IEC 60603-7-4. |
| 2167 | Supply, Installation, Testing and Commissioning of loaded 24 port Category 6A U/UTP Patch Panel, 24 port, 1U with removable rear cable bundle managers, intelligent upgradable, UL and cUL Listed, shall have cable strain relief mechanism for termination protection. |
| 2168 | Supply, Installation, Testing and Commissioning of CAT 6A U/UTP RJ45 Patch Cords, Solid core, LSZH IEC 60332-3-22, Diameter no more than 7.24 mm, 3 ft. |
| 2169 | Supply, Installation, Testing and Commissioning of CAT 6A U/UTP RJ45 Patch Cords, Solid core, LSZH IEC 60332-3-22, Diameter no more than 7.24 mm, 7 ft. |
| 2170 | Supply, Installation, Testing and Commissioning of 42 U (800W/800D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 2171 | Supply, Installation, Testing and Commissioning of 42 U (800W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 2172 | Supply, Installation, Testing and Commissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 2173 | Supply, Installation, Testing and Commissioning of 6U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 2174 | Supply, Installtion, Testing and Comissioning of 12U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos of hardware pkts., 6 Socket PDU with MCB as per technical specification.. |
| 2175 | Supply, Installation, Testing and Commissioning of 24U floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 2176 | IP-PBX SYSTEM |
| 2177 | Supply, Installtion, Testing and Comissioning of IP Based voice Communication System - as per DBR / Tender specification. |
| 2178 | Supply, Installation, Testing & Commissioning of Type 1 IP Phone - as per DBR / Tender specification. |
| 2179 | Supply, Installation, Testing & Commissioning of Type 2 IP phone - as per DBR / Tender specification. |
| 2180 | Supply, Installation, Testing & Commissioning of Type 3 IP phone - as per DBR / Tender specification. |
| 2181 | Supply, Installation, Testing & Commissioning of Type 4 IP phone - as per DBR / Tender specification. |
| 2182 | LOCAL AREA NETWORK ( LAN ) |
| 2183 | Supply, Installation, Testing and Commissioning of Core Switch - as per DBR / Tender specification. |
| 2184 | Supply, Installation, Testing and Commissioning of Distribution Switchas - as per DBR / Tender specification. |
| 2185 | Supply, Installation, Testing & Commissioning of Access switch Should have minimum 48 X 10/100/1000 BaseT PoE/PoE+ RJ45 Ports (minimum 740W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members, Should have compatibility to work in atmospheric tempemperature range -5 degree C to 50 degree C. |
| 2186 | Supply, Installation, Testing & Commissioning of Access switch should have 24 x 10/100/1000 BaseTPoE/PoE+ RJ45 Ports (minimum 370W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2187 | Supply, Installation, Testing & Commissioning of Access switch should have 16 x 10/100/1000 BaseTPoE/PoE+ RJ45 Ports (minimum 250W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2188 | Supply, Installation, Testing & Commissioning of Access switch should have 8 x 10/100/1000 BaseTPoE/PoE+ RJ45 Ports (minimum 125W) plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2189 | Supply, Installation, Testing & Commissioning of Access switch should have 4 x 10/100/1000 BaseTPoE/PoE+ RJ45 Ports (for Parking, Roads area on pole) as per DBR / Tender specification. |
| 2190 | Supply, Installation, Testing & Commissioning of Access switch should have 48 X 10/100/1000 BaseT RJ45 Ports plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2191 | Supply, Installation, Testing & Commissioning of Access switch should have 24 x 10/100/1000 BaseT RJ45 Ports plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2192 | Supply, Installation, Testing & Commissioning of Access switch should have 16 x 10/100/1000 BaseT RJ45 plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2193 | Supply, Installation, Testing & Commissioning of Access switch should have 8 x 10/100/1000 BaseT RJ45 plus 2x 1/10G BaseX SFP+ Ports populated with 2 nos 10G (SX) SFP. Should have dedicated 40 Gbps of stacking bandwidth proposed with stacking cable. Stacking should support upto 8 Stacking members. Switch should have dedicated 1 x 10/100/1000 BaseT port for Out of band Management port. Should have compatibility to work in atmospheric temperature range -5 degree C to 50 degree C. |
| 2194 | Firewall with UTM - Supply, Installation, Testing & Commissioning of UTM solution should be Hardware based, Reliable, purpose-built security appliance with hardened operating system that eliminates the security risks associated with general-purpose operating systems, It Should support 1:1 high availability, It Should have minimum 6 x 10G supporting SFP+ interfaces & 4 x 100/1000/10 BaseT RJ45 ports to cater to connectivity from multiple service providers and load balance them. The Firewall should have ultra-low latency (~ < 5 micro seconds). The Firewall should support IPSEC & SSL VPN, inbound and outbound both. The IPSEC VPN should deliver at least 20 Gbps throughput to ensure connectivity with Multiple colleges / University catering to Data / Voice traffic over IPSEC tunnel. The Firewall should be able to handle very high concurrent sessions like 20 Million or above and at least 400,000 of new sessions per second. The solution should support Virtualization with 10 Virtual contexts scalable to 250 to help University use the logical Firewalls for internal / student projects run isolated with each other as per tender specification. |
| 2195 | Supply, Installation, Testing and Commissioning of Authentication, Authorization and Accounting (AAA) - as per DBR / Tender specification. |
| 2196 | Supply, Installation, Testing and Commissioning of Network Management System (NMS) - as per DBR / Tender specification. |
| 2197 | Supply, Installation, Testing and Commissioning of Router - as per DBR / Tender specification. |
| 2198 | Wi-Fi SYSTEMS |
| 2199 | AP Indoor - Supply, Installation, Testing and Commissioning of the WLAN solution should have comprehensive integrated security features that include layer 2-7 statefulpacket filtering firewall including for branch and remote offices. AP indoor 3x3 with 802.11 a/b/g/n/ac support and should have disaster recovery mechanism automatically by taking role of controller in terms of controller failure. Same Make of Switch and module. |
| 2200 | AP Outdoor - Supply, Installation, Testing and Commissioning of the WLAN solution should have comprehensive integrated security features that include layer 2-7 statefulpacket filtering firewall including for branch and remote offices,AP outdoor 3x3 with 802.11 a/b/g/n/ac support and should have disaster recovery mechanism automatically by taking role of controller in terms of controller failure, IP67. Same Make of Switch and module. |
| 2201 | Supply, Installation, Testing & Commissioning of Wirelss controller to support Min 512 AP in future , ready to support min 120 AP from from Day1 .Min 2x USB ports , Min 16 K Wirelss client support , Min 4 GB RAM ,Min 32 GB Storage , Same make as switch.WLAN Controller should be Hardware appliance 1U Rack mountable as per tender specification. Same Make of Switch and module. |
| 2202 | CCTV SYSTEMS |
| 2203 | Supplying Installation Testing and Commissioning of 5/6MP IP IR Dome Camera having following specifications and features etc :- 1)Type of Camera: Dome Camera 2) Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.008Lux@ F1.4, AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to 1/30000s Shutter Support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR 30 Mtrs for colour view in night. 9) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 10) Wide Dynamic Range: WDR (120dB or more) 11) Digital Noise Reduction: DNR (2D/3D) On/Off 12) Streaming: Triple/quad streaming, configurable 13) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5/6MP @25/30 fps, Sub streams: D1@25/30 fps or better 14) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser 15) Profile Management: User configuration import, export 16) Security: User Authentication, Water Marking 17) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 18) Recording Management: Format SD, overwrite, storage management, video to NAS device, 19) Edge Analytics : Tripwire, Intrusion, Motion Detection 20) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 21) Alarm Support: It should have 1/1 Alarm In/ Out Port 22) Audio Support: It should have 1x Built-In Mic and 1/1 Audio In/ Out Port for external Mic. and Speaker (As per site requirement) with G.711U/A/ G.711Mu/ AAC/ G.726 audio compression 23) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 24) System Capability: ONVIF 25) VMS: Camera shall support open source VMS 26) Cyber Security: trusted boot, AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, , account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade. 27) Ethernet: 1 RJ 45 10/100 Ethernet port 28) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE—to ensure continuous operation in the event of a failure in one power source. 29) Power Requirement: 12VDC/24VDC/PoE (802.3af)/ePoE 30) Enclosure: IP67 weather proof, IK10 40.5.1 40.5.2 31) Operating Condition: Ambient Temperature:- (-) 05°C to 50°C, humidity 95% (max) (non-condensing) 32) IR life: 40000 hours or higher 33) Video Bit rate: 32 KBPS - 8 MBPS or better34) Standards: BIS with ER, STQC Certified, CE, FCC , RoHS and UL certified, NDAA |
| 2204 | 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens Dome Camera. |
| 2205 | Supplying Installation Testing and Commissioning of 5MP/6 MP IP IR Bullet Camera having following specifications, type of lens and features etc :- 1) Type of Camera: Bullet Camera 2) Image Sensor: 1/2.8\\" or better progressive Scan CMOS get color image even at night condition 3) Signal System: PAL/NTSC 4) Minimum Illumination: 0.006Lux@ F1.4, AGC ON, 0 lux with IR or better 5) Imaging: 1/3s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Lens Type & Focus: as given below. 9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source Inbuilt IR LED's with effective distance upto 50 Mtrs integrated IR and 30 Mtrs for colour view in night. 10) Video Compression (Minimum): H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 11) Wide Dynamic Range: WDR (120dB or more) 12) Digital Noise Reduction: DNR (2D/3D) On/Off 13) Streaming: Triple streaming,quad, configurable 14) Video Streaming & Frame Rates: Triple streaming , configurable Main stream: 5MP/6MP @25/30 fps, Sub streams: D1@25/30 fps or better 15) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser 16) Profile Management: User configuration import, export 17) Security: User Authentication, Digital Water Marking 18) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 19) Recording Management: Format SD, overwrite, storage management, video to NAS device,20)Edge Analytics: Tripwire, Intrusion, MotionDetection21)Alarm Trigger : Motion/tampering detection;network disconnection detection; IP conflict detection;memory card state detection; memory space detection22) Alarm Support: It should have 1/1 Alarm In/ OutPort23) Audio Support: It should have 1x Built-In Mic and1/1 Audio In/ Out Port for external Mic. and Speaker(As per site requirement) with G.711U/A / G.711Mu/AAC/ G.726 audio compreesion24) Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP,NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE,NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS,unicast,25) System Capability: ONVIF26) VMS: Camera shall support open source VMS27)Cyber Security: trusted boot, AES 256-bitEncryption, Configuration encryption, trustedexecution, Digest, security logs, account lockout, ,video encryption, IP/MAC filtering, HTTPS, trustedupgrade.28) Ethernet: 1 RJ 45 10/100 Ethernet port29)Power Input: The camera should supportsimultaneous dual power input—12 VDC (via poweradapter) and PoE—to ensure continuous operation inthe event of a failure in one power source.30)Power Requirement: 12VDC/24V DC/PoE(802.3af)/ePoE31) Enclosure: IP67 weather proof, IK1040.6.1 40.6.2 40.7 32) Operating Condition: Ambient Temperature:- ()05°C to 50°C, humidity 95% (max) (non-condensing)33) IR life: 40000 hours or higher34) Video Bit rate: 32 KBPS - 8 MBPS or better35) Standards: BIS with ER, STQC Certified, CE, FCC,RoHS, UL and NDAA |
| 2206 | 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens outdoor Bullet Camera. |
| 2207 | 2 MP IP IR motorized PTZ @ 25/30fps or better camera, Triple streaming , configurable on resolution Main stream: 1080p@25/30 fps Sub streams :1080p@25/30 fps & D1@25/30 fps or better, varifocal lens 4.3-137 mm or better with Automatic & manual Focus Adjustment provisions, 32x Optical zoom and 12x Digital zoom with angle of view 57˚–2.4˚ , PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt, Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s |
| 2208 | Supply , Installation, Testing & Commissioning of 360 degree Panoramic Camera, True IP based panoramic fish eye camera capable to have 360 degree view having minimum 5 megapixel resolution with inbuilt IR for day/night operation. Should have all basic feature of dewarping digital zoom, etc. The cameras shall be UL/FM Listed. RJ- 45 Cable connectors will be used for Network/POE connectivity.with suitable power socket, power supply/ converters, Junction Box, indoor housin/wall/ parapet/ ceiling/ flush mount and connectors etc. complete as per specifications and approved makes |
| 2209 | Supply, Installation, Testing and Commissioning of 64 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/36/64, 2nd screen: 1/4/8/9/16 as per NIT specification. |
| 2210 | Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications . 6TB (Terabytes) |
| 2211 | Supply, Installation, Testing and Commissioning of Full HD 55\\" LED Professional Display Panel with mounting hardware, bracket etc. as per tender technical specification & list of approved makes. |
| 2212 | Supply, Installation, Testing and Commissioning of 24 port Fabric (SFP) switch with 20 Nos. of 20 100M/1G SFP Port , 4 Nos. of GbE RJ45/SFP Combo Port , 4 Nos. of 1G/10G SFP+ Port ,1 X Console , Switching bandwidth 128 Gbps , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP. L3 features - static routing , DHCP server as per tender technical specification & list of approved makes. |
| 2213 | Supply, Installation, Testing and Commissioning of Workstation PC for client : Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5\\" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest as per tender technical specification & list of approved makes. |
| 2214 | Supply, Installation, Testing and Commissioning of 4 or 6 Meter G.I Pole with foundation complete as required as per tender technical specification & list of approved makes. |
| 2215 | ACCESS CONTROL SYSTEM |
| 2216 | Supply, Installation, Testing and Commissioning of Access Control System Server Software consisting of Access Control system, Visitor management with all employee visitor license, Elevator Control, Guard Tour Management , Mantrap, Alarm Document, Alarm management, 3 client License, Graphical layout, Card Enrollment, Badge designing..All these along with high end security features consist in single package with an option to integrate with CCTV sub system (License based ) as per specifications of this tender and directions of Engineer-in-Charge. |
| 2217 | Supply, Installation, Testing and Commissioning of PC with 32\\" Monitor as per following specifications: Server Specification for Access Control Software- Processor - Intel® Xeon® X5670, 2.93GHz, 12M Cache, Turbo, HT, 1333MHz, OS - Genuine Windows XP/7 Colour Monitor - 17\\" Flat Panel LCD Monitor, RAM - 4GB DDR2, 667MHz SDRAM, Memory - 500 GB HDD, Graphic Card - Integrated Intel Graphics Media Accelerator X3100 Two(2) PCI-X and Two(2) PCI-Express Expansion Slots 2/4 USB, 2 serial, and 2 VGA Adaptor, CD/DVD ROM.; USB Keyboard and Mouse Dual Channel Internal Ultra320 SCSI Integrated RAID-1 with hot-spare, Dual Integrated 10/100/1000 Ethernet NIC I/O Expansion Option as per specifications of this tender and directions of Engineer-in-Charge. |
| 2218 | Supply, Installation, Testing and Commissioning of controller shall be a 32 bit microprocessor with Linux OS. The controller shall have 128 MB DDR SRAM and 64 MB Flash memory. Support minimum 16 doors with a readers for entry and exit. Support minimum 16 standard Weigand Interface on LONbus. Support minimum 64 I/Os with expandable 4 DI/DO modules on LONbus. Controller level redundancy with Hot Redundant Controller failover without manual intervention. The access controller shall support minimum Card Holder Memory: 1,00,000 card holders, expandable upto 2,50,000 card holders. The controller shall support minimum 100000 transaction buffer and 10000 event buffer. The controller shall have autonomous clock/calender with geographic time zone support and daylight saving. The controller shall have on-board 10/100MB Ethernet connection for TCP/IP connectivity. Controller shall have built-in web server and support web access. Shall perform in a peer to peer network with other controllers. Controller shall have IPSEC with 3DES encryption on LAN communication. Controller shall have Tamper protection feature.as per specifications of this tender and directions of Engineer-in-Charge. |
| 2219 | Supply, Installation, Testing and Commissioning of contact-less smart card reader with Read Range- upto 5cm, Mounting- Mullion, Operation Frequency- 13.56MHz, Reader Output- Wiegand, Card Compatibility- 2KByte, 4KByte I - Class smart cards, Mifare and DESFire. Environmental Rating- IP55, Operating Temp: -35º to 65º C, Operating Humidity: 5% to 95% relative humidity non-condensing, Power Rating: 5-16VDC, 55mA AVG Current, Certification: CE, UL, FCC as per specifications of this tender and directions of Engineer-in-Charge. |
| 2220 | Supply, Installation, Testing and Commissioning of biometric smart card reader Fingerprint Sensor : 500 dpi Optical Sensor, Fingerprint Capacity : 10K templates (5K users with 2 templates per user), Log Capacity: 50K events, Identification Speed:2000 matches per second, Card Reader: 13.56MHz Mifare, Operation Mode: Fingerprint, Fingerprint+ Pin/Card, Network Interface: TCP/IP, RS485, Reader output: Wiegand, Display: 128x64 graphic monochrome LCD, Multi - color LED, Keypad: 3x4 keypad, 3 navigation keys, Audio: Multi tone Buzzer, Power Supply:12 VDC, Protection Class: IP66, Operating Temp-20°C to +50°C, Certifications: CE as per specifications of this tender and directions of Engineer-in-Charge. |
| 2221 | Supply, Installation, Testing and Commissioning of single Electromagnetic lock,600 lbs along with magnetic contact complete as required. |
| 2222 | Supply, Installation, Testing and Commissioning of double Electromagnetic lock,1200 lbs along with magnetic contact complete as required. |
| 2223 | Supply, Installation, Testing and Commissioning of exit push button complete as required. |
| 2224 | Supplying and Laying including termination testing and Commissioning of following sizes of cable on surface/ recess/ existing cable tray/ conduit etc. complete as required. |
| 2225 | 3x1.5sqmm power twisted pair copper cable. |
| 2226 | Supply, Installation, Testing & Comissioning of Boom Barrier with Application: Outdoor, Drive: Block able Continuous Torque Motor, Version: Left handed (changeable to Right Hand), Logic Control: Included, Intelligence: The use of Block able Torque Motor Drive with continues torque Output and the microprocessor based controller eliminates the need for friction clutches to ensure maintenance free operation. The barrier may be installed at any position. Power Supply: 230 +/-10% VAC, 50Hz. Colour: Different and distinct colour pattern as decided by owner. The paint used will be anti-corrosive and luminous for night and bad weather. Boom Specifications: straight or articulated -extruded aluminium alloy. Boom with octagonal profile (straight and articulated 100mm x 55mm x 1.6mm. Housing Dimension: W300mm, D 350mm, H1040mm, Protection: All Housing and internal parts will be rust & corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable. Opening: 1.4 seconds for 6 meters long Boom Barrier. Closing Time: Should be 1.4 Sec approx. Power-Off: Manual Opening Possible, Operation: Push button type for electro-mechanical operation to open and close the Boom Barrier, Duty Cycle: 100% up to 3 meter Electromechnical Boom barrier with loop sensor /beam sensor & boom resting post vehicle access barrier & all accessories complete as required as per specifications . |
| 2227 | Supply, Installation, Testing & Comissioning of Boom Barrier with Application: Outdoor, Drive: Block able Continuous Torque Motor, Version: Left handed (changeable to Right Hand), Logic Control: Included, Intelligence: The use of Block able Torque Motor Drive with continues torque Output and the microprocessor based controller eliminates the need for friction clutches to ensure maintenance free operation. The barrier may be installed at any position. Power Supply: 230 +/-10% VAC, 50Hz. Colour: Different and distinct colour pattern as decided by owner. The paint used will be anti-corrosive and luminous for night and bad weather. Boom Specifications: straight or articulated -extruded aluminium alloy. Boom with octagonal profile (straight and articulated 100mm x 55mm x 1.6mm. Housing Dimension: W300mm, D 350mm, H1040mm, Protection: All Housing and internal parts will be rust & corrosion free metals or alloys of high strength with suitable Epoxy coating as applicable. Opening: 1.4 seconds for 4.5 meters long Boom Barrier. Closing Time: Should be 1.4 Sec approx. Power-Off: Manual Opening Possible, Operation: Push button type for electro-mechanical operation to open and close the Boom Barrier, Duty Cycle: 100% up to 3 meter Electromechnical Boom barrier with loop sensor /beam sensor & boom resting post vehicle access barrier & all accessories complete as required as per specifications . |
| 2228 | SITC of 8 Conductor, 18-24 AWG, Overall Shielded, PVC for Card ReadersDescription : Shielded multi conductor control cableConductors : 18/22 AWG 7/32 Strand Tinned Copper, 6 conductorsInsulation : Colour coded PVC 0.010\\"Colour Code : Black, white, red, green, blue, brownShielding : 100% aluminium mylar foil shield overall with a 24 AWG 7/32 strand tinned copper drain wire.Jacket : Gray flame retardant PVC 0.032\\"Nominal OD : 0.205\\"Capacitance : 33 pF/Ft between conductorsRatings : Manufactured in accordance with UL subject 13, type CM Passed UL VW-1 Flame Test UL CM approved |
| 2229 | SITC of 2 Pair, 18 AWG, Individually Shielded, Poly propyene Insulated Signal Cable for Intelligent Controller Communication.Description : 2 pair individually shielded cableConductors : 18 AWG 7/30 Strand tinned copper, twisted into 2 pairsInsulation : Colour coded polypropylene, 0.008\\"Colour Code : Black with red, Green with whiteShielding : Each pair individually shielded with 100% aluminium mylar foiled shield plus 22 AWG 7/30 strand tinned copper drain wire.Jacket : Gray flame retardant PVCNominal OD : 0.170\\"Capacitance : 35 pF/FtVoltage : UL rated 300 VoltsRatings : Manufactured in accordance with UL subject 13, type CM Passed UL VW-1 Flame Test UL CM approved |
| 2230 | NURSE CALL SYSTEM |
| 2231 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved System Switch. The system switch forms a decentralised communications node for exchanging data between the connected system devices and the rest of the communications system, IP Ports, Control LEDs for indicating the current operating state etc as complete as required etc and as per tender technical specification. |
| 2232 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Nurse Station Terminal. The Nurse Station shall comprises of minimum 6“ large touch screen LC colour graphic display for displaying all details , a smash proof glass panel (to protect the sensitive display from unnecessary contact during cleaning and other processes) , Querying receiver for speaking discretely, Microphone and loudspeaker for hands-free speech (incl. volume control), automatic changeover between hands-free and discrete speaking , Electronic circuit board with controller and FlashProm, 100BaseTX interface to the system switch, PC interface to the communications control panel , 2.8m connection cable with an RJ45 connection plug, which is protected, from disconnection, for connecting to a connection module . The ward terminal shall display date and time, indication of all presence, all set reminedrs, indication of all calls in accordance with VDE0834. All call indications follow the priority and must display the exact location of the calls. The ward terminal shall be provided along with suitable connection module & back box etc and as per tender technical specification. |
| 2233 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Patient Handset Without Speech consisting of a plastic case in antimicrobial finish having Call button with nurse symbol with integrated finder and reassurance light on the top end of the unit, Membrane keypad in antimicrobial finish with integrated LEDS for operation, 1 call key, 2 lighting keys, 2.80 metre connection cable with auto-disconnecting RJ45 connector plug. It shall be supplied with cradel for holding patient terminals etc and as per tender technical specification. |
| 2234 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved connection module for Patient Terminal. Connection module for patient handset shall consist of 1 x RJ45 socket marked in colour and with measures to ensure that the push button is correctly connected, including auto disconnect mechanism, 1 membrane keypad with 1 call button (red with nurse symbol) including a finder/reassurance light, 1 presence key/ cancel button (green) including a control LED etc and as per tender technical specification. |
| 2235 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Patient Handset With Speech For operation by patients from their beds to carry out the functions listed Nurse call with possibility for communications, Service call with possibility for communications, Additional calls via service call key (optional) with possibility for communications, Integrated IP telephone end device (H.323 or SIP protocol stack), Controlling two independent lighting circuits, Controlling electronically driven shutters or other environmental applications, Automatic volume switching when using the PAT in the cradle, Plastic case and membrane keypad in fungicidal material. Splash resistant case, consisting of Call button with nurse symbol with integrated fi nder and reassurance light on the top end of the unit, Loudspeaker, microphone, headphones socket, A fully-graphical display, 2.80 m connection cable with a RJ45 plug which is protected against disconnection etc and as per tender technical specification. |
| 2236 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Room Terminal with display for Voice Rooms. Room Terminal with display & integrated functional components and operating membrane keypad with symbols; consisting of Electronic buzzer for acoustic call forwarding, Membrane keypad for operation, comprising of Call button (red) with integrated finder and reassurance light, Doctor call button (blue) with integrated finder and reassurance light, Presence button (green) with control LED, Presence button (blue) with control LED etc and as per tender technical specification. |
| 2237 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Pull Cord with cancel Button for Bath Area. Pull cord for Bath area shall consist of 1 call button (pull cord) including a finder light & reassurance light, 1 presence button (green) incl. control LED, integrated finder lights or reassurance light, micro switch with a 2 metre pull cord and a luminous grip with a nurse call symbol, Pull cord characteristics, max. force at break: 120N (ca. 12 kg): for hygiene reasons it must also be possible to change the pull cord very easily using a snap hook etc and as per tender technical specification. |
| 2238 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Call with cancel Button for WC. A membrane keypad with 1 call button (red) including a finder light / reassurance light, 1 presence button (green) incl. control LED, Moisture protected etc and as per tender technical specification. |
| 2239 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Code Blue button Doctor call-Cancel button for wards, 1 doctor call key (blue) including a finder light / reassurance light, Doctor cancel button, a membrane keypad, Integrated sounder, 2 RJ45 ports for loop connectivity etc and as per tender technical specification. |
| 2240 | Supply, Installation, Testing & Commissioning of VDE 0834 certified/ approved Loop Powered Lamp Module. For optical indication of calls, presences and reminders in the relevant colours conforming to VDE0834 consisting of 5 light chambers with light reflectors for homogeneous illumination, 1 light chamber fitted with 3 ultra bright red LEDs, 1 light chamber fitted with 3 ultra bright white LEDs, 1 light chamber fitted with 3 ultra bright green LEDs, 1 light chamber fitted with 3 ultra bright blue LEDs, 1 light chamber fitted with 3 ultra bright Yellow LEDs, 2 RJ45 ports for loop connectivity etc and as per tender technical specification. |
| 2241 | Supply, Installation, Testing & Commissioning of Management center Nurse Call Server. Management Centre Server for Nurse Call System for uploading the firmware and the system configuration, for operating interfaces to foreign systems, for logging of all system events and as a central location for system configuration and remote maintenance as per VDE 0834 - Intel Xeon 3220 2,4GHz or similar, 2 GB RAM, 1 x 160GB HDD, 1 x DVD harddrive, 2 x Gbit LAN Ethernet RJ45, 1 x serial connection RS232 and 2 x USBV2.0, 1 x PCI or 1 x PICe socket, support for SUSE Linux enterprise Server from V10.1 etc and as per tender technical specification. |
| 2242 | Supply, Installation, Testing & Commissioning of Software- Event Database Software. Software pack installed on the system server for automatically logging all events in the entire communications system, such as, e.g., calls, presence markings, call acknowledgements, reminders etc and as per tender technical specification. |
| 2243 | Supply, Installation, Testing & Commissioning of Software- Integration with IPBX. This interface used Voice over IP technology in accordance with the standard H.323 or SIP (G.711 a-law, G.711 μ-law, G.729 a/b) and is used for telecommunications between the patient terminals and the public telephone network as well as to other in-house extensions etc and as per tender technical specification. |
| 2244 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the samein case of recessed conduit as required. |
| 2245 | 20mm dia |
| 2246 | 25mm dia |
| 2247 | 32mm dia |
| 2248 | Supplying & laying of 2x1.5 sqmm fire survival cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. ( for Fire & PA System) |
| 2249 | 2x1.5 sqmm fire survival armoured cable, ( for Fire & PA System) |
| 2250 | 2x1.5 sqmm fire survival unarmoured cable,( for Fire & PA System in Conduit) |
| 2251 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required 2 x 1.5 sq. mm ( for Fire System) |
| 2252 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log andfacility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. |
| 2253 | Ten Loop Panel |
| 2254 | Two Loop Panel |
| 2255 | Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required. |
| 2256 | Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. |
| 2257 | Supplying, installation, testing & commissioning of intelligent analog addressable Photo-Thermal detector (Smoke detector) complete with mounting base complete as required. |
| 2258 | Supplying, installation, testing & commissioning of intelligent analog Addressable Multi-criteria Photo-Thermal Detector complete with mounting base complete as required. |
| 2259 | Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. |
| 2260 | Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. |
| 2261 | Supplying, installation, testing & commissioning of fault isolator complete with base as required. |
| 2262 | Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. |
| 2263 | Supplying, installation, testing & commissioning of addressable fire control module complete as required. |
| 2264 | Supplying, installation, testing & commissioning of addressable phone control module complete as required. |
| 2265 | Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver includingconnections with remote test features etc complete as required. |
| 2266 | Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required. |
| 2267 | Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 2268 | Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. |
| 2269 | Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. |
| 2270 | Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. |
| 2271 | PA SYSTEM |
| 2272 | Supply, Installation, Testing & Commissioning of UL/EN-54 Certified IP based EVAC PA controller capable of adding 20 zones in the system and expandable upto 24 zones with 14 x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support amplifier redundany, 12 speaker line outputs. 8000 fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 18 control inputs and 19 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server, software dependent solutions shall not be accepted. Multiple controllers can be networked over IP using Dante audio up to 16 digital audio input signals and 16 digital audio output channels with low latency.Audio flows Up to 16✕16 simultaneous audio streams @ 48kHz. Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. |
| 2273 | Supply, Installation, Testing & Commissioning of system Router shall be an UL/EN54-16 certified device in a 2RU, 19”cabinet. The device shall extend the 24 number of zones in a system and shall contain all the necessary controlling and monitoring functions. The internal supervision system shall monitor the functions and operation of both itself and the connected devices, Internal router pcb:4x 2ch x 6zone, were each block can be daisy chained, 12 A/B zones or 24 single zones. |
| 2274 | Supply, Installation, Testing & Commissioning of UL/EN-54 certified 1x500W Class, high efficiency amplifier. 70/100V loudspeaker output voltages, 4 automatic selectable audio inputs , local input for audio source. THD ≤1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 25 kHz. Signal-to-noise ratio (A-weighted) > 104 dB. Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault. |
| 2275 | Supply, Installation, Testing & Commissioning of UL/EN-54 certified 1x100W Class, high efficiency amplifier. 70/100V loudspeaker output voltages, 4 automatic selectable audio inputs , local input for audio source. THD ≤1%. Frequency response, ref. 1 kHz, rated load, -3 dB : 50 Hz to 25 kHz. Signal-to-noise ratio (A-weighted) > 104 dB. Audio input level limiter, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter, ground fault. |
| 2276 | Supplying, installation, testing & commissioning of 1.5/3/6W ceiling recess Mounted speaker complete as required. |
| 2277 | Supplying, installation, testing & commissioning of ceiling Surface mounted loud speaker, 6 watt in ABS enclosure complete as required. |
| 2278 | Supplying, installation, testing & commissioning of wall mounted loud speaker, 6 watt in ABS enclosure complete as required. |
| 2279 | Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required. |
| 2280 | Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required. |
| 2281 | Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required. |
| 2282 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface I recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. |
| 2283 | speaker cable Single pair, 2-core, 1.5 sqmm |
| 2284 | speaker cable Four pair, 2-core, 1.5 sqmm |
| 2285 | Supply,Installation,Testing & Commissioning of Interactive Display Panel of 65\\"Screen Size (Diagonal) / Aspect ratio 16:9 Panel Type IPS Panel / D-LED , Resolution (H × V) 3840 × 2160 pixels, Brightness 500 cd/㎡ , Viewing Angle (Horizontal / Vertical) 178° / 178° , Response time 5ms (G to G) , Surface Treatment Hard Coating(2H), Anti-glare treatment of the front polarizer, Inputs 1x HDMI ,1x HDMI 1.4 (Type A) × 2 (4K@30Hz)/HDMI 2.0 (Type A) ×1 (4K@60Hz), HDMI Out HDMI Type A Connector × 1, DisplayPort × 1 complete with Wall mount kit |
| 2286 | Supply,Installation,Testing & Commissioning of Display Panel of 86\\"Screen Size (Diagonal) / Aspect ratio 16:9 Panel Type IPS Panel / D-LED , Resolution (H × V) 3840 × 2160 pixels, Brightness 500 cd/㎡ , Viewing Angle (Horizontal / Vertical) 178° / 178° , Response time 5ms (G to G) , Anti-glare treatment of the front polarizer, Inputs 1x HDMI ,1x HDMI 1.4 (Type A) × 2 (4K@30Hz)/HDMI 2.0 (Type A) ×1 (4K@60Hz), HDMI Out HDMI Type A Connector × 1, DisplayPort × 1 complete with Wall mount kit |
| 2287 | Supply,Installation,Testing & Commissioning of Display Panel of 65\\"Screen Size (Diagonal) / Aspect ratio 16:9 Panel Type IPS Panel / D-LED , Resolution (H × V) 3840 × 2160 pixels, Brightness 500 cd/㎡ , Viewing Angle (Horizontal / Vertical) 178° / 178° , Response time 5ms (G to G) , Surface Treatment Hard Coating(2H), Anti-glare treatment of the front polarizer, Inputs 1x HDMI ,1x HDMI 1.4 (Type A) × 2 (4K@30Hz)/HDMI 2.0 (Type A) ×1 (4K@60Hz), HDMI Out HDMI Type A Connector × 1, DisplayPort × 1 complete with Wall mount kit |
| 2288 | Supply,Installation,Testing & Commissioning of Wall Hardware for the Display panel. |
| 2289 | Supply , Installation , Testing & Commissioning of Matrix 4k Switcher Metal Chassis , with 12 nos Input slots (HDMI/DVI /DisplayPort/HdBaseT ) . 4 nos. output , expandable slots (HDMI/DVI /DisplayPort/HdBaseT ) , Resolution 4k (4096x2160 ) , Input/Output Signal Types HDMI/DVI /DisplayPort/HdBaseT , Advanced EDID management,HDCP complaint , Audio output , Ethernet port 10/100 Mbps. |
| 2290 | Supply,Installation,Testing & Commissioning of Wireless Presentation system with Operating system Windows 10 and higher macOS 11 (BigSur) and higher , Android v9 and higher , iOS 12 and higher (ClickShare App) ; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 , Audio output HDMI, USB 1 X USB-A, 1 X USB-C , Buttons 2nos ; Airplay, Google Cast, Miracast ; Maximum number of simultaneous connections 32 ; Noise Level Max. 25dBA @ 0-30°C , Max. 30dBA @ 30-40°C ; Authentication protocol WPA2-PSK in stand alone mode , WPA2-PSK or IEEE 802.1X ; Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1 |
| 2291 | Supply,Installation,Testing & Commissioning of High performance 2-way full range Ceiling Speaker Frequency Range (-10dB) 62 Hz – 20 kHz, Frequency Response (±3 dB) 96 Hz – 15 kHz , Power Rating IEC System Long-Term Ratings (low-Z direct):100 Watts Continuous Program Power 50 Watts Continuous Pink Noise (200W peak), 100 hrs Rated Noise Power 30W (30W tap) Rated Noise Voltage 70V/100V (with 70V/100V tap settings) , Sensitivity 91 dB (1kHz - 16 kHz) , Coverage Angle 110° conical Coverage Angles(by Frequency) Conical (Vertical & Horizontal) 500 Hz: 180°1000 Hz: 160°2000 Hz: 155°4000 Hz: 92° . |
| 2292 | Supply,Installation,Testing & Commissioning of Professional Dual channel Power amplifier 2x 200W @ 8 ohms, 2 x 300W @ 4 ohms, Sensitivity - 0.775v Input Impedence - 20K, Crosstalk - >65dB, S/ N ratio - > 110dB, Damping Factor - 500, THD - < 0.1% , Slew Rate - 15V / us. |
| 2293 | Supply,Installation,Testing & Commissioning of DIigital Signal Processor with Frequency Response 20Hz – 20kHz, ±0.5dB @0dBu , 8 input 8 output,400MHz 32/40 bit floating points , 96KHz sampling rate, ELNA capacitors ,PEQ / Low-shelf / Hi-shelf / ALL PASS filters, 2 USB, ethernet and RS232/RS485 control. |
| 2294 | Supply, installation, testing & commissioning of PTZ ,Camera with HD Resolution Real High Definition Image with 1/2.3 inch or higher high quality HD CMOS sensor , 1920 x 1080 super high quality video ,20 x or more zoom with 20x or more digital zoom, Pan Range: 170deg or more With HDMI output interface for video & RS 232/ RS 422 for controls 10 or more preset position. |
| 2295 | Network Controller with 10 Dante input channels, 2 output channels , Frequency Response +1, -1.5 dB 20 to 20,000 Hz , Sampling Rate 48 kHz , Bit Depth 24. |
| 2296 | Ceiling arrary microphone: Frequency Response 125 Hz to 20,000 Hz. Dynamic Range 77.5 dB. Signal-to-Noise Ratio 75.76 dB Aweighted. Maximum SPL 95.74 dBSPL. Sensitivity:-1.74 dBFS/Pa. Sampling Rate:48 kHz . Bit Depth: 24. Power Consumption:10.1 W maximum . Including with mount arrangement. |
| 2297 | Supply,Installation,Testing & Commissioning of High Speed triple-shielded bonded pairs HDMI Cable with Ethernet Gold Palted Lockable Connector. It support Data Transfer rate of upto minimum 10GBps and upto 48 bit Deep Color. Cable has overall shield against EMI/RFI interference and CL2 flame tested , Length 1.8mtr. |
| 2298 | Supply,Installation,Testing & Commissioning of Transmitter for HDMI Signal Extension over CATx Cable , Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3, transmission distance up to 40 m)for UHD and 4K signals or up to 70 m for 1080p, WUXGA, and 2K signals,EDID pass-through capability,bandwidth of 10.2 Gbps. |
| 2299 | Supply,Installation,Testing & Commissioning of Receiver for HDMI Signal Extension over CATx Cable , Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. |
| 2300 | Supply,Installation,Testing & Commissioning of Speaker Cable fof 2 Core 1.5 Sq. mm., stranded copper wire for maximum flexibility and covered with a tough PVC jacket to help prevent chafing,Wire should be designed to maximize sound quality and for better frequency response Cable with thickness of 2 Core1.5 Sq. mm. |
| 2301 | Supply,Installation,Testing & Commissioning of CAT6A U/FTP 4 shielded twisted pairs ,23AWG solid copper conductor Video & LAN , Bulk Cable — Low Smoke & Halogen Free recommended by HDBaseT. |
| 2302 | Supply,Installation,Testing & Commissioning of Equipment Rack , Size 24u u with front glass door , rear vented MS door , Lockable both doors , Inbuilt fitted Blower & Castors with power distribution panel |
| 2303 | Mis Interface Cables & Connectors |
| 2304 | Supply,Installation,Testing & Commissioning of Interactive Display Panel of 75\\"Screen Size (Diagonal) / Aspect ratio 16:9 Panel Type IPS Panel / D-LED , Resolution (H × V) 3840 × 2160 pixels, Brightness 500 cd/㎡ , Viewing Angle (Horizontal / Vertical) 178° / 178° , Response time 5ms (G to G) , Surface Treatment Hard Coating(2H), Anti-glare treatment of the front polarizer, Inputs 1x HDMI ,1x HDMI 1.4 (Type A) × 2 (4K@30Hz)/HDMI 2.0 (Type A) ×1 (4K@60Hz), HDMI Out HDMI Type A Connector × 1, DisplayPort × 1 complete with Wall mount kit |
| 2305 | Supply,Installation,Testing & Commissioning of Wireless Presentation system with Operating system Windows 10 and higher macOS 11 (BigSur) and higher , Android v9 and higher , iOS 12 and higher (ClickShare App) ; Video outputs 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-C DisplayPort 1.2 , Audio output HDMI, USB 1 X USB-A, 1 X USB-C , Buttons 2nos ; Airplay, Google Cast, Miracast ; Maximum number of simultaneous connections 32 ; Noise Level Max. 25dBA @ 0-30°C , Max. 30dBA @ 30-40°C ; Authentication protocol WPA2-PSK in stand alone mode , WPA2-PSK or IEEE 802.1X ; Wireless transmission protocol IEEE 802.11 a/g/n/ac and IEEE 802.15.1 |
| 2306 | Sound Bar VC cum sound bar with12 pixel , FOV 150º diagonal, 120º horizontal, 90º vertical ,4x lossless digital zoom, pan, and tilt,autozoom |
| 2307 | Supply,Installation,Testing & Commissioning of High Speed triple-shielded bonded pairs HDMI Cable with Ethernet Gold Palted Lockable Connector. It support Data Transfer rate of upto minimum 10GBps and upto 48 bit Deep Color. Cable has overall shield against EMI/RFI interference and CL2 flame tested , Length 1.8mtr.. |
| 2308 | Supply,Installation,Testing & Commissioning of CAT6A U/FTP 4 shielded twisted pairs ,23AWG solid copper conductor Video & LAN , Bulk Cable — Low Smoke & Halogen Free recommended by HDBaseT. |
| 2309 | Mis Interface Cables & Connectors |
| 2310 | Supply,Installation,Testing & Commissioning of Interactive Display Panel of 75\\"Screen Size (Diagonal) / Aspect ratio 16:9 Panel Type IPS Panel / D-LED , Resolution (H × V) 3840 × 2160 pixels, Brightness 500 cd/㎡ , Viewing Angle (Horizontal / Vertical) 178° / 178° , Response time 5ms (G to G) , Surface Treatment Hard Coating(2H), Anti-glare treatment of the front polarizer, Inputs 1x HDMI ,1x HDMI 1.4 (Type A) × 2 (4K@30Hz)/HDMI 2.0 (Type A) ×1 (4K@60Hz), HDMI Out HDMI Type A Connector × 1, DisplayPort × 1 complete with Wall mount kit |
| 2311 | Supply,Installation,Testing & Commissioning of HDMI Matrix Switcher with 6x2 matrix configuration, Inputs 6xHDMI, Outputs 2xHDMI, Resolution upto 4k ( 4096x2160 4K DCI), Color Sampling 4:4:4; Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby,TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audi, LPCM up to 8 channels . |
| 2312 | Supply,Installation,Testing & Commissioning of High performance 2-way full range Ceiling Speaker Frequency Range (-10dB) 62 Hz – 20 kHz, Frequency Response (±3 dB) 96 Hz – 15 kHz , Power Rating IEC System Long-Term Ratings (low-Z direct):100 Watts Continuous Program Power 50 Watts Continuous Pink Noise (200W peak), 100 hrs Rated Noise Power 30W (30W tap) Rated Noise Voltage 70V/100V (with 70V/100V tap settings) , Sensitivity 91 dB (1kHz - 16 kHz) , Coverage Angle 110° conical Coverage Angles(by Frequency) Conical (Vertical & Horizontal) 500 Hz: 180°1000 Hz: 160°2000 Hz: 155°4000 Hz: 92° . |
| 2313 | Supply,Installation,Testing & Commissioning of Professional Dual channel Power amplifier 2x 400W @ 8 ohms, 2 x 600W @ 4 ohms, Sensitivity - 0.775v Input Impedence - 20K, Crosstalk - >65dB, S/ N ratio - > 110dB, Damping Factor - 500, THD - < 0.1% , Slew Rate - 15V / us. |
| 2314 | Supply,Installation,Testing & Commissioning of Mixing Console of 6 channels, Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo) 1 Stereo Bus , mic preamps , XLR balanced outputs, PAD switch on mono inputs , +48V phantom power , Metal chassis. |
| 2315 | Supply,Installation,Testing & Commissioning of Transmitter for HDMI Signal Extension over CATx Cable , Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3, transmission distance up to 40 m)for UHD and 4K signals or up to 70 m for 1080p, WUXGA, and 2K signals,EDID pass-through capability,bandwidth of 10.2 Gbps. |
| 2316 | Supply,Installation,Testing & Commissioning of Receiver for HDMI Signal Extension over CATx Cable , Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3.Approved Make : Crestron. |
| 2317 | Supply,Installation,Testing & Commissioning of Wireless Lapel microphone system, 200 selectable frequencies, RF Carrier Frequency Range - CH1: 612.000 - 651.600 MHz (100 Selectable Frequencies) CH2: 652.000 - 691.600 MHz (100 Selectable Frequencies), Audio Frequency Range - 30Hz ~ 20 kHz, Signal-to-noise (A-weighted) - 120dB(A) , RF output - 50 mW max, Oscillation Mode -Inside the chip VCO oscillation True Diversity dual reciever. |
| 2318 | Supply,Installation,Testing & Commissioning of CAT6A U/FTP 4 shielded twisted pairs ,23AWG solid copper conductor Video & LAN , Bulk Cable — Low Smoke & Halogen Free recommended by HDBaseT. |
| 2319 | Supply,Installation,Testing & Commissioning of High Speed triple-shielded bonded pairs HDMI Cable with Ethernet Gold Palted Lockable Connector. It support Data Transfer rate of upto minimum 10GBps and upto 48 bit Deep Color. Cable has overall shield against EMI/RFI interference and CL2 flame tested , Length 1.8mtr.. |
| 2320 | Supply,Installation,Testing & Commissioning of Equipment Rack , Size 32 u with front glass door , rear vented MS door , Lockable both doors , Inbuilt fitted Blower & Castors with power distribution panel. |
| 2321 | Mis Interface Cables & Connectors |
| 2322 | SITC of exterior IP66 RGBW LED Neon Flexible light strip of 5 mtr standard length, Minimum System lumens of minimum 350 lumens/meter and System Lumen Efficacy > 25lm/w. Luminaire light beam spread - 110°, CRI90 for for better vivid color rendering, SDCM<4, which can be compatible with the DMX / Ethernet controller, product shall have 125mm pixel pitch with inbuilt DMX decoder, operating temp-40DegC to 45DegC, Product Dimension: 15x 15mm (WxH) ; The Strip should have IP66 protection and is offered IP67 rated connector to join the LED Strips incontinuity. The luminaire must be offered with Aluminum channel for mounting the strip lights. The product should be complete with all accessories and Driver. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate, approbation: CB/LVD/EMC/CE/ IP test report, Fixture & the Control system should be of same make for better compatibility, The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables.The successful bidder shall submit the technical data sheet for approval before supply of material. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2323 | SITC of compact DMX enabled Color changing with white LED linear grazing luminaire with high power LED with housing material of Extruded aluminum with die-cast aluminum end caps, dark grey anodized finish, system wattage should be less than or equal to 24W at full load and system lumen output of not less than 800 lumens with RGBNW. Fixture shall be available with minimum 24 High power discreet LED and architectural optics with choice of beam angles of elliptical 25°x 40°.The luminaires shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 1000 mm x 38 mm x 47 mm (with bracket) and weight not more than 1.5kgs. White SDCM < 4.CRI should not lesssthan 80.The prodcut should have discrete LED not 4 in 1 LED and it should have integral DMX de-coder.The product should be BIS certified.The product should have LM79 and LM80 certification. Fixture shall operate in a temperature range of -40°C to 50°C ; startup temperature range of -35°C to 50°C ; and storage temperature range of -40°C to 70°C. Fixture input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have for DMX and DC supply. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2324 | SITC of surface mounted, exterior-rated LED linearstrip light with 55W / 5m roll with 400 lm/m CCT3000K, luminaire with all the necessary accesories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 Robust Design & IP68 rating for outdoor use. Luminaire has input voltage 24VDC, Operating temperature -40°C to 50°C, IP68 & IK06 protection, Lumen maintenance of 30,000 hrs @ L50 at 35°C. Standards : EN60598，EN62471，EN62493+IEC62778, CE-EMC. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2325 | SITC of compact DMX enabled Color changing with white LED linear grazing luminaire with high power LED with housing material of Extruded aluminum with die-cast aluminum end caps, dark grey anodized finish, system wattage should be less than or equal to 120W at full load and system lumen output of not less than 3,900 lumens with RGBNW. Fixture shall be available with minimum 64 high power LED and architectural optics with choice of beam angles of elliptical 7.5°x 27°.The luminaires shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 1000 mm x 158 mm x 88 mm (with bracket) and weight not more than 8.5kgs. White SDCM < 4.CRI should not lesssthan 80.The prodcut should have discrete LED not 4 in 1 LED and it should have integral DMX de-coder.The product should be BIS certified.The product should have LM79 and LM80 certification. Fixture shall operate in a temperature range of -40°C to 50°C ; startup temperature range of -35°C to 50°C ; and storage temperature range of -40°C to 70°C. Fixture input voltage shall be 220V AC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have for DMX and DC supply. The luminaire should comply the IS 10322 (Part 5/Sec5):2013, IEC 60598-1:2014, IEC 60598-1:2014/AMD1:2017,IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. |
| 2326 | SITC of circular DMX enabled Color changing with White LED flood light luminaire with high power LED with housing material of diecast aluminium, dark grey anodized finish, system wattage should be less than or equal to 80W at full load and system lumen output of not less than 3500 lumens with RGBNW. Fixture shall be available with minimum 32 high power LED and architectural optics with choice of beam angles of Narrow 10°x 10°. The luminaires shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than φ225mm x 205mm (with bracket) and weight not more than 6 kgs.White SDCM < 4.CRI should not lesssthan 80.The prodcut should have discrete LED not 4 in 1 LED and it should have integral DMX de-coder.The product should be BIS certified.The product should have LM79 and LM80 certification. Fixture shall operate in a temperature range of -40°C to 50°C ; startup temperature range of -35°C to 50°C ; and storage temperature range of -40°C to 70°C . Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires for supply and 4 pole round cable L=50cm, 4x0.50mm2 for DMX. The luminaire should comply the IS 10322 (Part 5/Sec5):2013, IEC 60598-1:2014, IEC 60598-1:2014/AMD1:2017,IEC 60598-2-5:2015, IEC TR 62778:2014 (for LED chips) standards. |
| 2327 | SITC of Main Controller is an industrial-grade computer based on TCP/IP communication protocol network architecture. It’s designed for large scale DMX512 and DMX512/RDM lighting control projects. It supports multiple control systems for single and multiple buildings. It can control up to 6,000 DMX universes and equipped with operating system and intuitive user interface lighting control and management software. Industrial design for long-term operation with stable signal transmission, Can synchronize with NTP and GPS, Customizable hardware interface & supports unattended operation and remote control, supports power-on startup and scheduled timing start, supports automatic scenes playback and scheduling, Two RJ45 network interfaces (100/1000M adaptive), supports upgrading devices firmware over the network, housing made with steel aluminium with black finish, Input voltage of 100-240V AC at 50Hz, IEC classification of Class I, distance to sub-controller of max 100m (through Cat 5e cables), The dimensions of the main-controller shall be approximately 482 x 348 x 177 mm & shall have nominal weight of 11.7KG. Total power consumption of 300W. The net weight of the main controller shall not be more than 12KG, Operating temp. range of 0°C to 40°C, humidity range of 10 to 85% (no condensation), Ingress protection of IP20. Fixture & the Control system should be of same make for better compatibility, The successful bidder shall submit the following certifications/reports for approval before supply of materials: Product data sheets, complied with certificates of CE, CB & CQC. The successful bidder shall submit the technical data sheet for approval before supply of material. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2328 | SITC of Sub-controller is a new innovative and intelligent compact DMX512 control equipment that is based on TCP/IP communication protocol, it receives the data from the main or stand-alone controllers and transmits it to DMX512 luminaires in the network using USITTDMX512/1990 general protocol. The sub-controller structure is based on an industrial grade ARM and ultra-large-scale programmable logic circuits. It’s useful for complex fields applications environments as the signal transmission parameters can be adjusted and debugged. Key features like it supports online firmware upgrade, supports Art-Net, supports both daisy chain and series connection modes, Brightness control for easy white balance adjustment, 16 output ports, each port can control one DMX universe, Two network ports for cascaded connection between controllers or for main/backup operation, supports automatic luminaires addressing, signal port adopts an enhanced anti-surge and static design, housing made with aluminium material with black colour finish, Input voltage: 12V DC, power supply included, IEC Classification: Class III, Communication protocols: TCP/IP Art-Net, Network port: 2xRJ45 network communications ports, Output Ports: 16 signal output ports, Output ports type: 3 pole terminals (lockable), Power Consumption: 15W, Max Cable length: 100m, Net Weight: 3kg, Operating Temperature Range: -30°C to 50°C, Humidity Range: 10 to 90% (no condensation), Protection Rating: IP20, Fixture & the Control system should be of same make for better compatibility, Certifications: CE, CB, CQC, Product Dimension: 482 x 193 x 66 mm, The successful bidder shall submit the technical data sheet for approval before supply of material. The successful bidder shall submit the technical data sheet for approval before supply of material. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2329 | SITC of RDM-6Wall Splitter,should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic switching between DMX and RDM mode for auto-discovery, Operating temp: -10DegC to 35DegC, IP20, Interior applications,Finish/Color-Polycarbonate, Product Dimension: 195 × 105 × 21 mm, Fixture & the Control system should be of same make for better compatibility, Certification: CE Certified. The successful bidder shall submit the technical data sheet for approval before supply of material. The fixture, controller and powersupply should be of same make for better compatibility. |
| 2330 | SITC of Smart Managed Switches are the latest generation of switches to provide increased 8 port industrial network switch. It should Supports up to 8 10/100/1000Mbps Gigabit Ethernet ports and 4 SFP slots. It should be IEEE 802.1Q VLAN allows network segmentation to enhance performance and security. |
| 2331 | SITC of 19\\" Monitor for main controller |
| 2332 | SITC of 6 Meter GI Pole, 1x40W LED Light, 4 nos of foundation nut & bolt (20mm dia & 700 mm long with templates) with a base plate of 350mmx350mm, Base Plate thickness- 20 mm. GI Pole Thickness- 3.0mm. Pole OD should be 114 mm dia with inbuilt junction box. Pole Should have with single arm or Double Arm as per requirement at site. Pole should have a din rail for MCB mounting provision with Bakelite sheet and 32 mm Electrical Connector with Bubble sheet Packing complete as required including foundation. (Single Arm) |
| 2333 | SITC of 6 Meter GI Pole, 1x40W LED Solar light, PV Solar with hybrid and battery, 4 nos of foundation nut & bolt (20mm dia & 700 mm long with templates) with a base plate of 350mmx350mm, Base Plate thickness- 20 mm. GI Pole Thickness- 3.0mm. Pole OD should be 114 mm dia with inbuilt junction box. Pole Should have with single arm or Double Arm as per requirement at site. Pole should have a din rail for MCB mounting provision with Bakelite sheet and 32 mm Electrical Connector with Bubble sheet Packing complete as required including foundation. (Single Arm) |
| 2334 | SITC of IP66/ IK 06 Architectural LED Street Light LED Wattage in between 35w-42w. Fixture should be made up of die-cast aluminium and designed with a very small surface exposed to wind. Cooling fins are integrated into the cover. Pole connection: in die-cast aluminium and with gaskets to secure the frame. Suited for poles with a diameter 45-60mm. Optics: in PMMA, highly resistant to temperature and UV radiation. Fixture Coating should be standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating. Standard supply: automatic temperature control inside the device with automatic resetting. Safety diode to protect against voltage peaks compliant with EN 61547. With dedicated electronic device to protect the LED module. Complete with quick connection. Equipment: silicone rubber gasket; external screws and bolts in stainless steel; air recirculation valve. Insulation connector for quick installation with no need to open the fixture. ULOR should be 0%. Fixture should be with internal surge protector of 6 KV. Photometric performance: designed with an optical system capable of controlling the potential glare created by the growing light intensity of LEDs while achieving high photometric performance. Joint Accessories should be available for adjustable connection at 90degree, if required. Heat sink: the heat dissipation system should be specially designed and made to allow the operation of the LED lights with temperatures ensuring excellent performance/ efficiency and durability. Fixture should be Low Flicker i.e. product with a very low flicker; uniform light for greater eye protection. Fixture should have System Lumen package of minimum 5500 at maximum driver current of 530mA. Minimum System efficacy required – 140lm/w. Power factor should be minimum .9. CRI- 80, Fixture should be available in 4000K/ 5700 as per site requirement. Fixture should compliance with L80B20, Luminous Flux maintenance- 80%, Manufacturer name should be embossed on Light Fixture. LM 79/ LM80 reports should be produced for prior approval before procurement. |
| 2335 | SITC of LED Inground Uplighter of 25-35 W LED wattage, Adjustable with minimum 2000 lumens @700ma Driver current, minimum system efficacy- 70Lm/W, CCT: 3000K/4000K, IP 67, IK10, CRI-90, Adjustable Optics +/- 15 deg. Trafficable ( 4000 Kg). Operating Voltage: 220-240V & Beam Angle - 25 degree. The luminaries are high quality LED source with low energy consumption. Housing made up of Die-cast aluminum with high corrosion resistance. Complete with electronic control gear and accessories along with suitable fixing arrangement.Fixture should have reputaed LED like lumiled, cree or Nichia, LM 79 & LM80 must be provided at the time of exection. Fixture shuould be with 10-15 degree beam. have beam Fixture should be made in Europe & country of origin would be required at the time of supply. |
| 2336 | SITC OF IP65/IK 08 LED Bollard, Fixture should have wattage of 12-16W LED with minimum delivered lumen package 850Lm with minimum efficacy of 60LM/W. Fixture Top should be made of die-cast aluminium. Diffuser should be in vandal-resistant V2 self-extinguishing matt polycarbonate, UV-stabilized. Coating should be with standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating. LED: Luminous flux maintenance, 80%, 50.000h (L80B20). Power factor 0.9. Driver current should not be more than 350mA. Fixture should be compliant to EN62471 standard. Fixture should have reputaed LED like lumiled, cree or Nichia, LM 79,LM80 and sample must be provided before procurement for approval. Manufacturer name should be embossed on Fixture. |
| 2337 | Supplying and drawing following sizes of PVC insulated PVC sheathed copper conductor unarmoured multicore cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable copper lugs connections etc. complete in all respect as required. |
| 2338 | 3 core 1.5 sq.mm. |
| 2339 | Marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 2340 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 2341 | Supply & laying of following size of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC sheathed armoured cable in existing trenches/ Hume pipe/in ground as per IS : 7098:1988 with upto date amendments complete in all respect as required. |
| 2342 | 4c x 16 sq.mm |
| 2343 | 4c x 10 sq.mm |
| 2344 | 4c x 6 sq.mm |
| 2345 | 2c x 6 sq.mm |
| 2346 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 2347 | 4 X 16 sq. mm (28mm) |
| 2348 | 4 X 10 sq. mm (25mm) |
| 2349 | 4 X 6 sq. mm (19mm) |
| 2350 | 2 X 6 sq. mm (19mm) |
| 2351 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.c with cover & chamber. Complete in all respects as per direction of E/I. |
| 2352 | Providing and fixing 6 SWG dia GI wire on surface / in pipe / in trench for loop earthing along with the existing surface / recess conduit / submain wiring / cable as reqd. |
| 2353 | Water Cooled Centrifugal Chiller with VFD |
| 2354 | Supplying, Installation, Testing & Commissioning of 550 TR Centrifugal Water Cooled Chilling Machine Air-Conditioning, Heating, and Refrigeration Institute (AHRI) certified complete with factory fitted (unit mounted standing) (Variable Frequency Drive (VFD)) with active harmonic filter with IP54 protection having actual capacity as below. The scope of work shall include Lifting, shifting & positioning of the equipment at location shown on the drawing. Chiller given hereunder, comprising of following and complete as per specification/drawings and as directed by Engineer-in-charge. - Chilled water inlet temperature of 12.2°C (54°F) & Chilled water outlet temperature 6.7°C (44°F) with chilled water circulation, Evaporator side fouling factor 0.018 m².°C /kW - Condenser water inlet temperature Inlet - 32.2°C (90°F) & condenser water outlet temperature of 36.4°C (97.5°F) with water circulation, Condenser side fouling factor 0.044 m². ⁰C/Kw. |
| 2355 | Open/ Semi-Hermetic/ Fully hermetic Centrifugal Compressor complete with automatic capacity control system, safety switches, speed increasing mechanism, forced feed lubrication system etc. as per detailed specifications and compressor extended warranty of 1 year for refrigerant leakage & mechanical seal. |
| 2356 | Suitable capacity TEFC/SPDP Squirrel Cage Induction Motor with enclosure IP 23/ as per Original Equipment Manufacturer (OEM) standard & class 'F' insulation suitable for operation on 415±10% Volt, 3 Phase, 50 HZ, AC Supply. Vendor must provide Junction box along with each set of unit including cable works from junction box to chiller. |
| 2357 | Unit Mounted/ Free standing IP-54 protection (UL /EN certified) Variable Frequency Drive (VFD) Starter panel with air Cooled/ Refrigerant Cooled or as per Original Equipment Manufacturer (OEM) standard, suitable for compressor motor, complete having over-load protection, under-voltage protection, protection against phase reversal, current sensing independent single phasing protection etc. including multi-function meter and CTs, complete as per detailed specifications. |
| 2358 | Variable Frequency Drive (VFD)s shall comply with International Electro technical Commission (IEC) 61800-3 & have THD less than 5% at all Loads Active / passive filters must be use to achieve desired THD levels and other parameters as per IEEE - 519. Variable Frequency Drive (VFD)s shall be compatible for Modbus/BACnet Protocols. The power factor shall be > 0.95 at all loads. Original Equipment Manufacturer (OEM) shall ensure quality for each set of chiller & Variable Frequency Drive (VFD) before dispatch. Chiller performance parameters shall be as per IS 16590 and BEE star labeling. The chiller shall be Building Management System (BMS) compatible. |
| 2359 | Lubrication Device consisting of automatic electric oil pump, oil cooler, head tank, oil strainer, automatic pressure regulating valve, oil heater, thermal switch etc, as per detailed specifications and as required. |
| 2360 | Matching Shell and Tube Water Cooled Condenser of M.S. Shell and integrally finned Copper Tubes, 2 pass heat exchanger. The Condenser shall have U- stamping / PED Certification. Note- In case of R514a refrigerant, the relaxation on U stamping is applicable only after providing proper justification / proof documentation from Original Equipment Manufacturer (OEM) . |
| 2361 | Matching Shell and Tube Flooded type Chiller for centrifugal unit consisting of MS Shell and Copper Tubes, 2 pass Heat Exchanger, duly insulated at factory complete as per specifications and as required. The Evaporator shall have U- stamping. |
| 2362 | Refrigerant Line Accessories comprising of safety valves, angle valve, liquid line indications, liquid level control, liquid line Isolation valve, etc. OR as per Original Equipment Manufacturer (OEM) design standard complete as per specifications. |
| 2363 | DP/ Water Flow Switches at inlet and outlet of the condenser & chiller, water drain & air purge valves wherever required, complete as per specifications. |
| 2364 | Suction Line and Chiller Insulation with minimum 19mm thick elastomeric nitrile rubber insulation complete as required from factory. |
| 2365 | Foundation Frame Work for mounting the above condenser, chiller, compressor and motor with base plate, panel complete with anti-vibration pads (set of spring type), vibration isolators with Isolation efficiency more than 90%. Numbers shall be as per Original Equipment Manufacturer (OEM) standards.), complete as per specifications |
| 2366 | Initial/ First Charge of Refrigerant Gas and Compressor Oil. |
| 2367 | Chiller shall be factory tested at 25%, 50%, 75% and 100% load at Constant Condenser Water inlet at AHRI test bed |
| 2368 | Each chiller shall be provided with set of grooved coupling along with the chiller for cooler and condenser inlet / outlet connection. |
| 2369 | Chiller Original Equipment Manufacturer (OEM) shall provide undertaking in the name of end user for providing support for maintenance & spare availability for next 15 yrs from the date of Handover |
| 2370 | Software Selection Sheet to be Air-Conditioning, Heating, and Refrigeration Institute (AHRI) Certified based on latest version. Which can be varified online through AHRI website |
| 2371 | Sound performance shall be as per relevant AHRI for all loads. This data shall be provided as apart of chiller technical submittal. |
| 2372 | Suitable for Seismic Zone and Altitude as per location/site. |
| 2373 | Min. 550 TR BEE 3 Star Rated actual capacity centrifugal water chilling machine as described above and at above mentioned operating conditions in complaince with NIT. (2W+1S) |
| 2374 | Primary Chilled Water Pumps Set |
| 2375 | Supply, erection, testing and commissioning of end suction horizontally / vertically / end-suction split centrifugal primary chilled water pump set capable of delivering following given flow of water against following given head each comprising of the following and complete with TEFC squirrel cage induction motor, efficiency IE3 with class 'F\\" insulation. 1500 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. as required as per specification. The pump casing shall be PN 16 rating. The scope also shall include following. |
| 2376 | Insulation and mechanical protection, 2 Nos. 250 mm dia dial type pressure gauges. flexible pipe connector at inlet and outlet. Coupling and coupling guard as required. Pump head calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department, below reflcted pump head is indicative only. |
| 2377 | Primary Chilled Water Pumps Set in complinace with NIT, Flow - 4990 LPM, Head - 15 Meter, Motor Capacity - 30.00 HP Approx, Pump Efficiency (Min) - 75% (2W+1S) |
| 2378 | Secondary Variable Chilled Water Pumps Set (Criticle Area) |
| 2379 | Supply, erection, testing and commissioning of variable speed secondary variable chilled water end suction horizontally / vertically / end-suction split centrifugal pumps with aircooled IP42 adjustable frequency drives for each pump with balanced DC link reactors to minimize power line harmonics VFDs without a DC link reactor shall provide a 3% impedance line reactor for variable speed Pumping with 1 nos IP42 parallel pump controller from factory capable of delivering following given flow of water against following given head, complete with TEFC induction motor IE3 grade with class ‘F’ insulation to operate on 415+ 10% volts, 3 phase, 50 Hz A.C supply for each pump and DPT (Sensors). The entire system shall be complete in all respect along with variable speed pumps and shall be sourced from the single vendor. Pump casing shall be PN 16 rating. The system shall also include the following. |
| 2380 | Insulation with mechanical protection, 2 Nos. 150 mm dia dial type pressure gauges. Flexible pipe connector at inlet and outlet. Coupling and coupling guard as required. Pump head calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department, below reflcted pump head is indicative only. |
| 2381 | Secondary Variable Chilled Water Pumps Set in complinace with NIT, Flow - 2990 LPM, Head - 30 Meter, Motor Capacity - 25.00 HP Approx, Pump Efficiency (Min) - 75% (1W+1S) (Note: Pump size will be finalized as per final pump head calculation) |
| 2382 | Variable Frequency Drive (VFD) for Secondary Chilled water Pump |
| 2383 | Supply , erection ,Testing & commissioning of Variable Speed Pumping system consisting of three(03) nos. suitable HP adjustable frequency drive (AFD) suitably interfaced with other system components,hand/auto macro designed for pumping application,01 No.dedicated microprocessor based pump logic controller,parallel pumping software duly downloaded ,03Nos.Differential Pressure Sensor/ Transmitters, interfacing amongst all components & compatibility of I/O signals etc complete with other accessories as required. |
| 2384 | Secondary Variable Chilled Water Pumps Set (Non Criticle Area) |
| 2385 | Supply, erection, testing and commissioning of variable speed secondary variable chilled water end suction horizontally / vertically / end-suction split centrifugal pumps with aircooled IP42 adjustable frequency drives for each pump with balanced DC link reactors to minimize power line harmonics VFDs without a DC link reactor shall provide a 3% impedance line reactor for variable speed Pumping with 1 nos IP42 parallel pump controller from factory capable of delivering following given flow of water against following given head, complete with TEFC induction motor IE3 grade with class ‘F’ insulation to operate on 415+ 10% volts, 3 phase, 50 Hz A.C supply for each pump and DPT (Sensors). The entire system shall be complete in all respect along with variable speed pumps and shall be sourced from the single vendor. Pump casing shall be PN 16 rating. The system shall also include the following. |
| 2386 | Insulation with mechanical protection, 2 Nos. 150 mm dia dial type pressure gauges. Flexible pipe connector at inlet and outlet. Coupling and coupling guard as required. Pump head calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department, below reflcted pump head is indicative only. |
| 2387 | Secondary Variable Chilled Water Pumps Set in complinace with NIT, Flow - 3492 LPM, Head - 30 Meter, Motor Capacity - 40.00 HP Approx, Pump Efficiency (Min) - 75% (2W+1S) (Note: Pump size will be finalized as per final pump head calculation) |
| 2388 | Variable Frequency Drive (VFD) for Secondary Chilled water Pump |
| 2389 | Supply , erection ,Testing & commissioning of Variable Speed Pumping system consisting of three(03) nos. suitable HP adjustable frequency drive (AFD) suitably interfaced with other system components,hand/auto macro designed for pumping application,01 No.dedicated microprocessor based pump logic controller,parallel pumping software duly downloaded ,03Nos.Differential Pressure Sensor/ Transmitters, interfacing amongst all components & compatibility of I/O signals etc complete with other accessories as required. |
| 2390 | Pressurised Chilled Water Expansion Tank & Air Separator |
| 2391 | Supply, Installation, Testing and commissioning of insulated closed chilled water expansion tank suitable for total volume of water in chilled water circuit along with necessary accessories such as 2 Nos. pumps (1working +1standby) with Pressure Transmitter and interconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. The tank shall be pre-charged. Expansion tank Shall be with replaceable heavy duty butyl rubber bladder. The tank shall have 50 MM system connection and 20 mm drain and charging valve connection to facilitate the on site charging of nitrogen in the tank. The tank shall be fitted with lifting rings and a floor mounting skirt for vertical installation. The tank must be constructed in accordance with IS- 2825-1969 suitable for minimum 125 PSI working pressure. The complete system shall be sourced from single manufacturer and supplied and installed with all accessories and safety fixtures required for proper functioning of the complete hydronic system. |
| 2392 | The tank shall be duly painted in approved colour shall be complete with pressure switches and power distribution and control panel IP42 Control Panel, Pressure Transmitter, interconnecting piping & wiring. Minimum tank capacity is indicative only. Tank capacity calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department. Chilled water closed vessel pressurized expansion tank as described above shall be duly insulated with mechanical protection arrangement. |
| 2393 | Centrifugal type air separator with pot type strainer for flanged connection 200mm pipe line, automatic air purging arrangement etc. The design parameters for the air separator of efficiency 96-98 %. Suitable for PN15 rating, complete with super vent as required and duly insulated with mechanical protection arrangement. Flexible pipe connector at inlet and outlet. All should be in complinace with NIT. |
| 2394 | a) Supply, Installation, Testing & Commissioning, For Chilled Water Circuit, Minimum 1500 Liters Approx Tank Capacity with Air Separator |
| 2395 | b) Supply, Installation, Testing & Commissioning, For Hot Water Circuit, Minimum 750 Liters Approx Tank Capacity with Air Separator |
| 2396 | FRP Induced Draft Cooling Tower WITH EC Fan |
| 2397 | FRP Induced Draft Cooling Tower as per CTI Standards: Supply, installation, testing and commissioning of FRP Induced draft, cross / counter flow, FRP MOC Isophthalic resin, single/multiple fan, direct driven, site erected cooling tower of capacity as mentioned below based on the parameters given below and complete with PVC Fill, Louvers, Drift Eliminator, Weather Proof IP 55 TEFC Motor (IE3), EC Fan, FRP Basin, Hot dip galvanised Steel Ladder, Stainless Steel hardware including nut, bolt, washer etc. Isolating switch and other accessories to make it fully operational and maintaince National Accreditation Board for Testing and Calibration Laboratories (NABL) & positioning of cooling tower at Terrace of Building. The cooling tower shall conform to technical specifications given in the tender and should be as per CTI standards. The maximum allowable sound power at a distance of 1 M from the cooling Tower shall be less than 75 dB. (Make: Melfrank LLP, AAD Tech India Pvt. Ltd.). Lot- RCC/Cement concrete foundation shall be in civil cooling tower alongwith MS structure shall be in ac contractor scope. The Cooling tower shall be capable to communicate effectively with Building Management System (BMS). Range of CT: 4.17 deg C. Designed Duty Conditions :-EWT, LWT, D/WBT. drawings and as directed by Engineer-in-charge.(Note - Cooling tower size depends on the ambient temperature conditions , contractor must check the required design temperature). |
| 2398 | Existing RCC coloumn to raised as per GFC / Shop Drawings, floating deck in MS garder supporting structure or RCC structure as beam & sub beam to be placed over it for placing the cooling tower, service and maintenance movement space provision to be made around the tower and in-between the towers, anti-vibration mountings etc. complete as per specifications and as reqd. The scope shall include suitable electrical isolator suitable for outdoor application near cooling towers. The Cooling tower should be CTI complaince.Designed Wet Bulb Temperature- 28.9 °C Flow Rate: 9072 LPMWater Temp. IN:36.17°CWater Temp. OUT:32.0°C (2W+1S) Cooling Capacity 22,69,000 KCAL. & 2400 GPM |
| 2399 | Condenser Water Pumps Set |
| 2400 | Supply, erection, testing and commissioning of end suction horizontally / vertically / end-suction split centrifugal Condenser water pump set capable of delivering following given flow of water against following given head each comprising of the following and complete with TEFC squirrel cage induction motor efficiency class IE3 with class 'F\\" insulation. 1450 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply as required as per specification. Pump casing shall be PN 16 rating. The scope also shall include. |
| 2401 | 2 Nos. 150 mm dia dial type pressure gauges. Coupling and coupling guard as required. Flexible pipe connector at inlet and outlet. Pump head calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department, below reflcted pump head is indicative only. |
| 2402 | Condenser Water Pumps Set and in complinace with NIT, Flow - 8300 LPM, Head - 13 Meter, Motor Capacity - 40.00 HP Approx, Pump Efficiency (Min) - 85% (2W+1S) |
| 2403 | Hot Water Generator For Winter Heating / Monsoon reheat |
| 2404 | Supply, installation, testing and commissioning of electrically operated Hot Water Generator of efficiency more than 90% of capacity 225 KW in multiple bank complete with PLC based microprocessor controls, electrical panels, stainless steel braided pipe flexible connector etc. confirming to tender specifications section. SS double braided flexible pipe connector at inlet and outlet. The cost shall include the BMS interface card for integration with BMS System. |
| 2405 | Inlet Water Temperature 50 °C |
| 2406 | Outlet Water Temperature 55 °C |
| 2407 | Hot Water Generator of 250 Kw and in complinace with NIT (2W+1S) |
| 2408 | Hot Water Pumps Set: Supply, erection, testing and commissioning of end suction horizontally / vertically / end-suction split centrifugal primary hot water pump set capable of delivering following given flow of water against following given head each comprising of the following and complete with TEFC squirrel cage induction motor, efficiency IE3 with class 'F\\" insulation. 1500 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. as required as per specification. The pump casing shall be PN 16 rating. The scope also shall include following. |
| 2409 | Insulation and mechanical protection, 2 Nos. 150 mm dia dial type pressure gauges. flexible pipe connector at inlet and outlet. Coupling and coupling guard as required. Pump head calculation shall be submitted by HVAC Contractor based on approved shop drawings for approval from department, below reflcted pump head is indicative only. |
| 2410 | Hot Water Pumps Set and in complinace with NIT, Flow - 650 LPM, Head - 30 Meter, Motor Capacity - 10.00 HP Approx, Pump Efficiency (Min) - 75% (2W+1S) |
| 2411 | Variable Frequency Drive (VFD) for Hot water Pump: Supply , erection ,Testing & commissioning of Variable Speed Pumping system consisting of three(03) nos. suitable HP adjustable frequency drive (AFD) suitably interfaced with other system components,hand/auto macro designed for pumping application,01 No.dedicated microprocessor based pump logic controller,parallel pumping software duly downloaded ,03Nos.Differential Pressure Sensor/ Transmitters, interfacing amongst all components & compatibility of I/O signals etc complete with other accessories as required. |
| 2412 | Side Stream Filtration System: Supply, Installation, Testing and Commissioning of Side Stream Filtration System for 1200 TR (Working) Condenser water system @ 4.0 USGPM/TR and Condenser water Delta T of 7.5° F. Treatment systems which will be connected in parallel shall have sweeper jet, separator, pumps, automatic purge unit, control / electrical panel, power and control cabling, structural frame work of carbon steel, UV resistant fusion bonded polyester coated separator body and Enamel based paint on structural framework, piping and valves as required to connect with condenser pipe line etc and other associated accesseries as required. The cost shall include the BMS interface card for integration with BMS System. Flexible pipe connector at inlet and outlet as required to be included. All should be in complinace with NIT. |
| 2413 | Chilled Water Cassette Unit: Supply, installation, testing and commissioning of chilled water / hydronic cassette units (compact multi flow 4 way type) with factory equipped motorised modulating diaphram type pressure independent cum balancing control, pre-filter, fan section with low noise fan, multispeed motor, coil section with coil, drain pump, outer cabinet with cassette panel, drain pan, insulation, pipe connections arrangement, required length of copper piping, wired remote controller / thermostat of latest generation including wiring as required etc. etc. of various capacities as per approved drawings & complete as required. All should be in complinace with NIT. |
| 2414 | 4.0 TR nominal capacity with 1600 CFM air quantity. |
| 2415 | 3.0 TR nominal capacity with 1200 CFM air quantity. |
| 2416 | 2.5 TR nominal capacity with 1000 CFM air quantity. |
| 2417 | 2.0 TR nominal capacity with 800 CFM air quantity |
| 2418 | Chilled Water Fan Coil Unit: Supply, installation ,testing and commissioning of Ceiling Concealed Fan Coil Unit comprising of 3 rows deep chilled water cooling coil, centrifugal blowers, fractional horse power (FHP) motor, synthetic fibre filters, insulated & extended condensate drain pan along with L-type auxillary tray, casing, coil piping connections, condensate drain piping connections & wiring. Fan coil units shall be suitable for operation on 220 +/- 6% Volts, 50Hz, single phase power supply of following sizes & capacities. Complete as per CPWD specification and as directed by Engineer-in charge |
| 2419 | 3.0 TR nominal capacity with 1200 CFM air quantity. |
| 2420 | 2.5 TR nominal capacity with 1000 CFM air quantity. |
| 2421 | 2.0 TR nominal capacity with 800 CFM air quantity. |
| 2422 | 1.5 TR nominal capacity with 600 CFM air quantity. |
| 2423 | 1.0 TR nominal capacity with 400 CFM air quantity. |
| 2424 | Supply, Installation, Testing and commissioning of complete controls for AHUs comprising of Electronic, self balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valves in a single body. The actuator shall be capable of accepting 2-10VDC, 4-20mA electric signal and shall provide similar transduced feedback output signal to control system. The minimum close off pressure of actuator must be 1.5 times shut off head of pump as per specifications and drawing of following sizes. Valves and associated item sizes shall be 25 mm up to 2 TR & 32 mm for 2.5 TR & above for chilled water application. All should be in complinace with NIT. |
| 2425 | For Up to 2.0 TR |
| 2426 | For 2.5 TR & Above |
| 2427 | Air Handling Units, Floor Mounted: Double Skin Floor Mounted AHU (CC+ MERV 8 Filter + UV Section): Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Eurovent certfied (Leakage class L1, Casing strength class D1, Thermal transmittance class T2, Thermal Bridging factor TB2)Air- handling unit Floor mounted Horizontal & Vertical type/ Ceiling Suspended , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple Backward Curve Aerofoil design blades Non mettalic EC Bluefin fans (AAD Tech - Zeihl Abegg) made from composite ZAMID, Smart VSD MCU controller with ready BMS configuration an Digital I/O points,Auto RPM Modulation based on set parametrs either constant Airflow/Constant Temperature, MODBUs enabled BLE controller, Fire integration setting, Fan ON/Off Status,Scheduling facilty to Auto On/off based on set timing,IOT functionality for future integration to access from any point with internet power control panel with necessary switchgears incoming & outgoing, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE5) type and IP55 suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,, 4 / 6 Row cooling coil & 2 Row Heating Coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 & filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. System should be designed keeping in mind opeartioonal energy efficienct methodology so that it should not consume more than 0.188 watts per cfm. |
| 2428 | The AHU panels shall be insulated with 50mm thick of 40 Kg/m³ density PUF & shall have thermal break profile. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 137 MPM maxm. |
| 2429 | 2,000 CFM, C/S AHU 50 mm St. Pr., 4 Row CC, No HC, With EAC Filter(MERV-14) |
| 2430 | 2,500 CFM, C/S AHU 50 mm St. Pr., 4 Row CC, No HC, With EAC Filter(MERV-14) |
| 2431 | 3,500 CFM, C/S AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2432 | 4,000 CFM, C/S AHU 65 mm St. Pr., 4 Row CC, No HC, With EAC Filter(MERV-14) |
| 2433 | 5,500 CFM, C/S AHU 65 mm St. Pr., 4 Row CC, No HC, With EAC Filter(MERV-14) |
| 2434 | 5,000 CFM, F/M AHU 65 mm St. Pr., 4 Row CC, No HC, With EAC Filter(MERV-14) |
| 2435 | 7,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2436 | 8,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, 2 Row HC, With EAC Filter(MERV-14) |
| 2437 | 9,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2438 | 10,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2439 | 12,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2440 | 13,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, 2 Row HC, With EAC Filter(MERV-14) |
| 2441 | 13,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2442 | 14,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2443 | 15,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2444 | 16,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, No HC, With EAC Filter(MERV-14) |
| 2445 | 17,000 CFM, F/M DX AHU 65 mm St. Pr., 6 Row CC, NO HC, With EAC Filter(MERV-14) |
| 2446 | 18,000 CFM, F/M DX AHU 65 mm St. Pr., 6 Row CC, NO HC, With EAC Filter(MERV-14) |
| 2447 | 3,500 CFM, F/M TFA 65 mm St. Pr., 6 Row CC, 2 Row HC, With EAC Filter(MERV-14) |
| 2448 | 12,000 CFM, F/M TFA 65 mm St. Pr., 6 Row CC, 2 Row HC, With EAC Filter(MERV-14) |
| 2449 | DOUBLE SKIN FLOOR MOUNTED AHU (FOR OT WITH 12 ACH/HR) |
| 2450 | Double Skin Floor Mounted AHU (CC+ MERV 8 Filter + UV Section): Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Eurovent certfied (Leakage class L1, Casing strength class D1, Thermal transmittance class T2, Thermal Bridging factor TB2)Air- handling unit Floor mounted Horizontal & Vertical type/ Ceiling Suspended , fabricated out of extruded aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section with single / multiple Backward Curve Aerofoil design blades Non mettalic EC Bluefin fans (AAD Tech - Zeihl Abegg) made from composite ZAMID, Smart VSD controller - MCU, with ready BMS configuration an Digital I/O points,Auto RPM Modulation based on set parametrs either constant Airflow/Constant Temperature, MODBUS enabled BLE controller,Fire integration setting, Fan ON/Off Status,Scheduling facilty to Auto On/off based on set timing,IOT functionality for future integration to access from any point with internet power control panel with necessary switchgears incoming & outgoing, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE5) type and IP55 suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,, 4 / 6 Row cooling coil & 2 Row Heating Coil made of Aluminium finned Copper tube with coil section, Copper Header, pre-filter section with non woven synthetic media MERV 8 & filters in extruded aluminium frame, polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. System should be designed keeping in mind opeartioonal energy efficienct methodology so that it should not consume more than 0.188 watts per cfm. |
| 2451 | The AHU panels shall be insulated with 50mm thick of 40 Kg/m³ density PUF & shall have thermal break profile. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specication. The face velocity across coil shall be limited to 137 MPM maxm. |
| 2452 | 3000 CFM Supply Air, 8 Row CC, 2 Row HC, 125 mm St. Pr., Supply Fan, |
| 2453 | DOUBLE SKIN FLOOR MOUNTED AHU (FOR 100% FRESH AIR) |
| 2454 | Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section with 0.8mm pre- plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm polished SS sheet inside complete with supply & exhaust blower section with backward curved EC fan with aerofoil design blades, power control panel with necessary switchgears incoming & outgoing, HRW & humidifier, Non mettalic EC Bluefin fans (AAD Tech - Zeihl Abegg), made from composite ZAMID, Smart VSD MCU controller with ready BMS configuration an Digital I/O points,Auto RPM Modulation based on set parametrs either constant Airflow/Constant Temperature, MODBUs enabled BLE controller,Fire integration setting, Fan ON/Off Status,Scheduling facilty to Auto On/off based on set timing,IOT functionality for future integration to access from any point with internet power control panel with necessary switch gears incoming & outgoing, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE5) type and IP55 suitable forblower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium finned Copper tube, Copper header with coil section, pre-filter section with non woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply & exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow plenum & not to be included in the cost), Heat Recovery Wheel with HRW Section & mixing chamber. |
| 2455 | UV section only of 600 mm in length in floor & ceiling mounted AHU (UV System quantified separately), polished stainless steel drain pan made out of 22 G sheet duly insulated etc. without face and bypass dampers. The AHU panels shall be insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. These AHUs shall have air inlet / outlet connection made of aluminium 20 G & all fixing arrangement / blank off shall be of SS The complete AHU shall conform to standard specication. The face velocity across cooling / heating coil shall be limited to 152 MPM maxm. The static pressure given below is for guidance only actual shall be as per shop drawings. The capacity of Air-handlers shall be as follows: |
| 2456 | (4000 CFM Supply Air Blower, 8 Row CC, 2 Row HC, 125 mm St. Pr., 4000 CFM Ex. Air Blower, 40 mm St. Pr. with Heat recovery coil & other accessories as specified above) |
| 2457 | Thermostat for AHU: Supply, installation, testing and commissioning of latest generation digital display programmable BMS compatible thermostat for cool mode application suitable for two pipe system for various air handling Units. The thermostat shall have provision of setting of space temperature and display of the same. The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. The cost quoted shall be excluding the control valves. All should be in complinace with NIT. Temperature control shall be done through temperature sensors via BMS system, thermostat quantity considered herein for commissioning purpose only. |
| 2458 | Cooling & Heating mode thermostat for air-handler. |
| 2459 | Nominal Capacity 8.5 TR DX Outdoor unit (1 outdoor unit only of 8.5 TR ) including MS stand and Bracket for indoor and outdoor unit with Expansion Kit |
| 2460 | Refrigerant Piping for DX Outdoor unit : Supply, Installation, testing and commissioning of Interconnecting copper refrigerant pipe work with 9mm closed cell elastomeric nitrile rubber tubular insulation with class 'O' , FM approved including electrical cabling & earthing as per specification for split air conditioning units and cutting and chasing in wall for crossing and making good the same if required.All the joints to be sealed with Star bond R 242 Adhesive, as per specifications and drawings. All piping inside the building & shaft shall be properly supported with MS hanger and all external piping shall run in covered cable tray. |
| 2461 | Supply, installation, testing and commissioning of latest generation digital display thermostat for cool mode application suitable for two pipe system for various FCU. The thermostat shall have provision of setting of space temperature and display of the same. The quoted price of thermostat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. The cost quoted shall be excluding the control valves. All should be in complinace with NIT. |
| 2462 | Cooling & Heating mode thermostat for FCU |
| 2463 | Supply, installation, testing and commissioning of digital display, communicating type thermostat with humidistat for various air handling Units. The thermostat with built in / individual humidistat shall have provision of setting of space temperature & RH and shall display the both. The quoted price of thermostat / humidistat shall include the cost of 20mm MS conduits, control cabling, MS Box etc as required. Temperature + RH Sensor for AHUs are also specified in BMS Part. Thermostat with built in humidistat shall be installed in case BMS commissioning is significantly delayed. |
| 2464 | Cooling & Heating mode thermostat with RH control for air-handler. |
| 2465 | Humidifier |
| 2466 | Supply, Installation, Testing & Commissioning of Immersed resistive heater type of humidification system |
| 2467 | The humidifier system shall have the following: |
| 2468 | Linear Stainless Steam Distributor made of SS 304 material supported by a fastening bracket. |
| 2469 | Steam Hose Pipe of a length of 4m with a Operating temperature range of -25°C to 105°C. Hose should be made of thermoplastic rubber withgalvanized steel helix and polyester yarn reinforcement. |
| 2470 | Condensate Air Water Pipe of a length of 4m. |
| 2471 | Hot water drain hose of dia 40 mm & 1m long, Operating Temperature range should be -30°C to +110°C. Pipe should be of the following composition- heat-resistant smooth black EPDM rubber substrate.Reinforced with heat-resistant synthetic fabric. Smooth, resistantouter covering.1 m long |
| 2472 | Duct Temperature / Humidity Sensor |
| 2473 | Inlet Water Pipe at the Supply point of 1.5 m. |
| 2474 | The steam generator shall also have twin sensing electrodes for detection of water foaming and high limit water level; |
| 2475 | Antifoam algorithm (AFS) to prevent irregular operation due to the formation of foam inside the cylinder; |
| 2476 | Each element shall have 1 PTC to detect and protect against overheating; |
| 2477 | Electric resistances made in titanium with low thermal resistance for fast response, stability of production and safety against overheating; |
| 2478 | Must have a Graphic touch display 4.3” |
| 2479 | Water level sensor for the precise control of the water level on the entire conductivity range 0…1500µS/cm, without any change or additional board |
| 2480 | Humidifier shall be suitable for RO / DM Water or all types of water. |
| 2481 | Intelligent microprocessor controller with algorithm that automatically adapts operation to the water quality |
| 2482 | Steam capacity shall be continuously controlled in the range 0..100% of the rated production; |
| 2483 | Humidifier shall have built-in power transformer, no needs of neutral line on power supply or additional external transformer |
| 2484 | Embedded conductivity meter for the automatic management of the dilution drains and subsequent fills according to the supply water quality |
| 2485 | SSR’s (solid-state relays) for precise modulation of the steam production by dosing the power fed to the water |
| 2486 | Humidifier should be of IP20 Rating |
| 2487 | RS485 serial port ready to communicate on Modbus, Bacnet protocol for supervisory system. Without any additional devices |
| 2488 | Thermal shock feature, removing lime scale from the heating elements, extends the cleaning intervals and makes maintenance quicker |
| 2489 | Metallic housing with cover removable to allow full front access for easy maintenance |
| 2490 | The humidifier shall limit the steam production based on a proportional hi-limit probe that is self-adjusting according to AHU/duct air flow |
| 2491 | Electrical section separated by a division wall and including the power circuitry and the control components, manufactured according to state-of-the-art norms |
| 2492 | Pre-heating to keep the water warm in order to reduce the time to production (user-editable pre-heating set point |
| 2493 | The humidifier capacity and quantity shall be as follows: |
| 2494 | Humidification Load -4 kg/hr |
| 2495 | Humidification Load -6 kg/hr |
| 2496 | Supply, installation, testing and commissioning of single pahse square / circular type Inline fans with motor, fire retardent double layer canvass connection etc complete in all respect & of following capacities. The casing of inline fans shall be of heavy gauge & shall be selected for lower noise level. Fan motor shall have inbuilt speed controller. Indicative static pressure given below but actual calculation shall be done by HVAC Contractor based on approved shop drawings for approval from department. All should be in complinace with NIT. |
| 2497 | 200 CFM / 300 CFM (10mm static pressure, single phase) |
| 2498 | 600 CFM / 700 CFM / 800 CFM (10mm static pressure, single phase) |
| 2499 | 1500 CFM / 1600 CFM (20mm static pressure, single phase) |
| 2500 | 1700 CFM / 1800 CFM / 2000 CFM (20mm static pressure, single phase) |
| 2501 | 2200 CFM/2500 CFM (20mm static pressure, single phase) |
| 2502 | Supply, installation, testing and commissioning of propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply complete with gravity louvers & speed regulator etc. All should be in complinace with NIT. |
| 2503 | Up to 125 CFM, 6 Inch Dia, 3 mm St. Pr. |
| 2504 | Above 125 CFM and Up to 250 CFM, 8 Inch Dia, 3 mm St. Pr. |
| 2505 | Above 250 CFM and Up to 500 CFM, 10 Inch Dia, 3 mm St. Pr. |
| 2506 | Supply, installation, testing and commissioning of GI propeller exhaust fans of various capacities as given below suitable for 240 volts, 50 Hz, 900 / 700 RPM single phase AC supply complete with gravity louvers & speed regulator etc. All should be in complinace with NIT. |
| 2507 | Upto 4500 CFM, 610 mm Dia, 3 mm St. Pr., 700 RPM |
| 2508 | Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. |
| 2509 | Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted. Complete Fan shall be tested and approved by UL in accordance with \\"Power Ventilators forSmoke Control Systems\\" for Class- H Motor |
| 2510 | Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory. |
| 2511 | 4,000 CFM (25mm st. pr, 750 mm Dia Axial Fan, 1.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2512 | 5,000 CFM (25mm st. pr, 750 mm Dia Axial Fan, 1.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2513 | 6,000 CFM (25mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2514 | 7,000 CFM (25mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2515 | 9,000 CFM (25mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2516 | 10,000 CFM (20mm st. pr,900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2517 | 12,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2518 | 15,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2519 | 17,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2520 | 25,000 CFM (20mm st. pr, 1100 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2521 | 26,000 CFM (20mm st. pr, 1100 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2522 | 32,000 CFM (20mm st. pr, 1100 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2523 | Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans with adjustable pitch blade, MS / GI long casing (2mm thick up to 800 mm dia fan, 3 mm thick from 900 to 1250 mm dia & 4 mm thick above 1300 mm dia) , cast aluminium alloy impeller complete with TEFC (Motor Efficiency IE3) Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, three phase A.C supply with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep (Inlet & Outlet as required), bird screen (Inlet & Outlet as required) etc. & of following capacity. The complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours. Fan outlet velocity shall be limited to maximum of 16 m/sec. Fan & Fan motor KW given below are for guideline & actual Dia / KW shall be as per manufacturer selection based on maximum 16 m/sec outlet velocity. |
| 2524 | Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA 210 and AMCA 300. Complete certified model appearing on AMCA web site shall be accepted.Complete Fan shall be tested and approved by UL in accordance with \\"Power Ventilators for Smoke Control Systems\\" for Class- F Motor. |
| 2525 | Manufacturer shall furnish AMCA Test Certificate for air & sound performance along with UL fire test certificate (Latest) for each fan sourced from that particular factory. |
| 2526 | 4,000 CFM (25mm st. pr, 750 mm Dia Axial Fan, 1.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2527 | 5,000 CFM (25mm st. pr, 750 mm Dia Axial Fan, 1.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2528 | 6,000 CFM (20mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2529 | 7,000 CFM (20mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2530 | 9,000 CFM (20mm st. pr, 900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2531 | 10,000 CFM (20mm st. pr,900 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2532 | 12,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 3.7 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2533 | 15,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2534 | 17,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2535 | 20,000 CFM (20mm st. pr, 1000 mm Dia Axial Fan, 5.6 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2536 | 25,000 CFM (20mm st. pr, 1100 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2537 | 26,000 CFM (25mm st. pr, 1100 mm Dia Axial Fan, 7.5 KW, 1450 RPM Fan Motor, Direct Driven) |
| 2538 | Factory Fabricated Double Skin Airwasher |
| 2539 | Supply, installation, testing and commissioning of factory fabricated Double Skinned Air- washer unit floor mounted type fabricated out of extruded aluminium section with Aluminum Bird Louvers followed by 10micron filters 0.6mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside for Dry section & 0.6mm SS304 for Wetsection to avoid rustings, Blow through type unit to be designed with Aerofoil design blades Non mettalic EC Bluefin fans (AAD Tech - Zeihl Abegg), Smart VSD MCU controller with ready BMS configuration an Digital I/O points,Auto RPM Modulation based on set parametrs either constant Airflow/Constant Temperature irrespective of filter choking flow should remain constant on delivery side, MODBUS enabled BLE controller, Fan ON/Off Status,, blower suitable for static pressure as required (Fan Static given below is for guideline), blower motor TEFC (IE5) type and IP55 suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, tank shall be made of 18 G stainless steel. Tank should be 1.6mm thick and made of SS-304, Minimum depth of tank should be 300mm and is designed such a wat to carry extra droplets from final Airwasher section. (Make: Aad Tech India Pvt. Ltd/Intgeni Smarttech pvt ltd/ Air Vision technologies pvt ltd) |
| 2540 | The Air-washer shall be complete with fill of depth 300 mm deep Honeycomb type pads followed by 4 bend PVC eliminators & face velocity across the fill shall be limited to 152 MPM. The Air-washer shall have an efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The Air-washer shall have an saturation efficiency of 90% & shall be complete with water circulation pump GI B Class interconnecting piping & valves Aluminum viscous filters. The airwasher panels shall be insulated with 25mm thick & 40 Kg/m³ density PUF. The Airwasher shall conform to specication given in the tender & shall be of following capacity. |
| 2541 | 5,000 CFM, |
| 2542 | 22,000 CFM |
| 2543 | Factory Fabricated Dry Scrubber |
| 2544 | Supply, installation, testing and commissioning of factory fabricated Double Skinned Dry Scrubber unit floor mounted type fabricated out of extruded aluminium section with 0.8mm pre-plasticized /pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and blower motor TEFC type IE-3 suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, belt drive package, dry scrubber section etc. The face velocity across the section shall be limited to 152 MPM. The scrubber shall have fire retardent double canvass connection etc. |
| 2545 | The scrubber panels shall be insulated with 50mm thick & 36 Kg/m³ density PU foam. The dry section shall work on electrostatic precipitation technology and discharge clean dry type air after removing oil, smoke and fumes from exhaust air & shall be with washable type aluminum mesh filters, stainless steel spiked ionizers to create high voltage DC field, aluminum collector plates which should be alternatively charged positive and negative with large collecting area to work as magnet for charged smoke and oil particles. It shall conform to details given in NIIT. |
| 2546 | Dry Scrubber, 25,000 CFM, 1 x 500 mm Dia. Fan, 1 x 3.7 Kw Fan Motor, 70 mm St. Pressure. |
| 2547 | VRF/VRV OUTDOOR AC UNIT |
| 2548 | HI - WALL SPLIT SYSTEMS: Supply , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, ehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 2549 | 1.5 TR with 5 Star BEE Rating |
| 2550 | 2.0 TR with 5 Star BEE Rating |
| 2551 | Insulated Chilled Water Piping (Expanded Polystyrene Insulation): Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect. |
| 2552 | Note:-The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. |
| 2553 | 300 mm dia. (75 mm thick insulation) |
| 2554 | 250 mm dia. (75 mm thick insulation) |
| 2555 | 200 mm dia. (75 mm thick insulation) |
| 2556 | 150 mm dia. (75 mm thick insulation) |
| 2557 | 125 mm dia. (50 mm thick insulation) |
| 2558 | 100 mm dia. (50 mm thick insulation) |
| 2559 | 80 mm dia. (50 mm thick insulation) |
| 2560 | 65 mm dia. (50 mm thick insulation) |
| 2561 | 50 mm dia. (50 mm thick insulation) |
| 2562 | 40 mm dia. (50 mm thick insulation) |
| 2563 | 32 mm dia. (50 mm thick insulation) |
| 2564 | 25 mm dia. (50 mm thick insulation) |
| 2565 | BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. All should be in complinace with NIT. |
| 2566 | 250 mm dia |
| 2567 | 200 mm dia |
| 2568 | 150 mm dia |
| 2569 | 125 mm dia |
| 2570 | 100 mm dia |
| 2571 | 80 mm dia |
| 2572 | 65 mm dia |
| 2573 | 50 mm dia |
| 2574 | 40 mm dia |
| 2575 | Globe valves shall be of PN 1.6 rating as per IS 13095, flanges as per IS 6392 Table \\"E\\". Valves of sizes upto 40 mm and above diameter of cast iron close end body, cast iron epoxy coated disc, Nitrile Seat and SS 410 Stem with tefflon bush. All should be in complinace with NIT. |
| 2576 | 25 mm dia |
| 2577 | 32 mm dia |
| 2578 | BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/ hot eater circulation as specified. All should be in complinace with NIT. |
| 2579 | 300 mm dia |
| 2580 | 250 mm dia |
| 2581 | 200 mm dia |
| 2582 | 150 mm dia |
| 2583 | 125 mm dia |
| 2584 | 100 mm dia |
| 2585 | 80 mm dia |
| 2586 | 65 mm dia |
| 2587 | 50 mm dia |
| 2588 | 40 mm dia |
| 2589 | NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified. All should be in complinace with NIT. |
| 2590 | 250 mm dia |
| 2591 | 150 mm dia |
| 2592 | Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. All should be in complinace with NIT. |
| 2593 | 250 mm dia |
| 2594 | 150 mm dia |
| 2595 | 125 mm dia |
| 2596 | 100 mm dia |
| 2597 | 80 mm dia |
| 2598 | 65 mm dia |
| 2599 | 50 mm dia |
| 2600 | 40 mm dia |
| 2601 | 32 mm dia |
| 2602 | PIBC: Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. |
| 2603 | 80 mm dia |
| 2604 | 65 mm dia |
| 2605 | 50 mm dia |
| 2606 | 40 mm dia |
| 2607 | 32 mm dia |
| 2608 | Condenser Water Piping: Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect. Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. All should be in complinace with NIT. |
| 2609 | 400 mm dia pipe |
| 2610 | 350 mm dia pipe |
| 2611 | 200 mm dia pipe |
| 2612 | 80 mm dia pipe |
| 2613 | Supplying, fixing, testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications. All should be in complinace with NIT. BUTTERFLY VALVE (MANUAL) with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. All should be in complinace with NIT. |
| 2614 | 400 mm dia |
| 2615 | 350 mm dia |
| 2616 | 200 mm dia |
| 2617 | 80 mm dia |
| 2618 | 65 mm dia |
| 2619 | 50 mm dia |
| 2620 | NON - RETURN VALVE with dual plate of CI body SS platesvulcanized NBR seal flanged end & PN 16 pressure rating as specified. All should be in complinace with NIT. : 300 mm dia |
| 2621 | Manual Balancing Valve confirming to tender specification & of following sizes with sizes 32 mm to 65 mm dia. shall be of gun metal / cast iron construction with screwed ends angular design digital hand wheel with locking facility. Valves of sizes 75 mm and above of cast iron construction with internal parts of SS 410 and EPDM / nitrile seat with flanged ends. Valve shall have PN 1.6 rating. The valve shall have built in pressure drop measuring facility with flow measuring and adjustment facility. All should be in complinace with NIT. |
| 2622 | 300 mm dia |
| 2623 | Pot Strainer: Supply, installation, testing and commissioning of Pot - Strainer of the following sizes conforming to SSPL 106 shall have cast iron body and factory tested at works at 16 Kg/sq. cm pressure with flanged end as per Table-E, BS 10 . The screen / filter shall be made out of 3 mm perforated stainless steel sheet of SS-304 grade capable for heavy duty operation. A cone with sufficiently large drain pipe with butterfly valve at the bottom chamber to flush-out foreign particles shall be part of the pot strainer. A powerful magnet shall be provided in the body to arrest MS particles. All should be in complinace with NIT. |
| 2624 | 400 mm dia |
| 2625 | Motorized Butterfly Valve: Supplying, fixing, testing and commissioning of following sizes Motorized Butter fly Valve with CI Body, SS Disc,O - ring and minimum PN-16 pressure rating , conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20mA electric signal and providing similar transduced feedback output to control system as required. Valves on chilled / hot water line shall be insulated as per insulated piping specification and valves on condenser water line shall not be insulated. All should be in complinace with NIT. |
| 2626 | 300 mm dia |
| 2627 | 250 mm dia |
| 2628 | 200 mm dia |
| 2629 | 150 mm dia |
| 2630 | 125 mm dia |
| 2631 | Pressure Gauges |
| 2632 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required. All should be in complinace with NIT. |
| 2633 | Thermometer |
| 2634 | Providing & fixing in position the mercury in glass industrial type thermometers. All should be in complinace with NIT. |
| 2635 | Auto Air Vent / Plug Valves |
| 2636 | Supply, installation, testing and commissioning of auto air vent valve / purge valve of following sizes and complying with tender specification, auto air vent to purge out the trapped air in the water pipe line / plug valves in dirt legs to bleed out the dirt and debris in water pipe line complete as required. All should be in complinace with NIT. |
| 2637 | 10 mm dia auto air vent valve |
| 2638 | 19 mm dia auto air vent valve |
| 2639 | 25 mm dia auto air vent valve |
| 2640 | Condensate Drain Piping with Nitrile Rubber Insulation |
| 2641 | Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class on wall / floor / roof complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Complete pipe shall be duly insulated with fire retardent Closed Cell Elastomeric Nitrile Rubber in the form of pre-formed pipe sections of specified pipe section of specified thickness in the tender specification & suitable for indoor / outdoor application including mechanical and UV protection similar to chilled water piping. Green building complinace adhesive shall be used. All should be in complinace with NIT. |
| 2642 | 19 mm dia pipe, 13 mm Insulation |
| 2643 | 25 mm dia pipe, 13 mm Insulation |
| 2644 | 32 mm dia pipe, 13 mm Insulation |
| 2645 | 40 mm dia pipe, 13 mm Insulation |
| 2646 | 50 mm dia pipe , 19 mm Insulation |
| 2647 | 65 mm dia pipe, 19 mm Insulation |
| 2648 | Refrigerant Piping |
| 2649 | Flift |
| 2650 | All the civil work such as chisling, making hole in brick / block work for passing insulated refrigerant piping as well as power and control cabling, finishing / making good etc shall be included in scope. Piping inside the building on exposed wall shall be concealed inside the brick / block work and outside the building, it shall be clipped on wall / ceiling surafce to suit site requirement. All should be in complinace with NIT. |
| 2651 | For Air Cooled Hi Wall Unit |
| 2652 | For Air Cooled Precision Packaged Unit |
| 2653 | Condendate Drain Piping for Air Cooled Hi Wall Unit |
| 2654 | Supply, installation, testing & commissioning PVC hard drain piping with trap with with necessary tees, elbows and fittings, insulation with 6 mm / 9 mm thick make Nitrile Rubber Sleeve insulation of fire retardent grade of conductivity less than 0.22 Btu.in./(h.ft² °F) and density 60+/-10% Kg/CMT etc as required to suit site condition and mechanically and UV protected as applicable similar to chilled water piping. Insulation shall be CFC free. Green building complinace adhesive shall be used. All the civil work such as chisling, making hole in brick / block work for passing insulated piping, finishing / making good etc shall be included in scope. Piping inside & outside the building on exposed wall shall be concealed inside the brick / block work to suit site requirement. All should be in complinace with NIT. |
| 2655 | 19 mm Dia. of pipe, PVC Hard Pipe |
| 2656 | 25 mm Dia. of pipe, PVC Hard Pipe |
| 2657 | Supports of Outdoor / Indoor Unit |
| 2658 | Supply & fixing of GI frames for outdoor units, Choki / Cantilever Type and for indoor unit as required to suit site conditions. All should be in complinace with NIT. |
| 2659 | For Air Cooled Hi Wall Unit |
| 2660 | For Air Cooled Precision / Packaged Unit |
| 2661 | SS Braided Flexible Pipe Connector |
| 2662 | Supply, installation, testing and commissioning of insulated / non insulated as applicable flanged SS double braided pipe flexible connector of length range 200 mm to 600 mm of PN 16 pressure rating in chilled water / condenser / condensate drain water line at building expansion joints, at entry of each building, in external piping at every 100 meter, vertical riser after every two / three nos. of floors. For all the equipments such as Chillers, Condensers, AHUs, Cooling Towers, Pumps etc, it shall be part on equipent and costing shall be included in respective equipments. It shall be installed as per approved piping layout. All should be in complinace with NIT. |
| 2663 | 125 mm dia |
| 2664 | 150 mm dia |
| 2665 | 200 mm dia |
| 2666 | 250 mm dia |
| 2667 | 350 mm dia |
| 2668 | Rectangular GI Ducting (Factory Made - L Shape) |
| 2669 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. All should be in complinace with NIT. |
| 2670 | 24 G, Thickness 0.63 mm sheet (Up To 750 mm) |
| 2671 | 22 G, Thickness 0.80 mm sheet (751 to 1500 mm) |
| 2672 | 20 G, Thickness 1.00 mm sheet (1501 to 2250 mm) |
| 2673 | Site Fabricated GI Ducting |
| 2674 | Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. All should be in complinace with NIT. |
| 2675 | 24 G, Thickness 0.63 mm sheet (Up To 750 mm) |
| 2676 | 22 G, Thickness 0.80 mm sheet (751 to 1500 mm) |
| 2677 | 20 G, Thickness 1.00 mm sheet (1501 to 2250 mm) |
| 2678 | 18 G, Thickness 1.25 mm sheet (Above 2250 mm) |
| 2679 | Supply, fabrication, installation and testing of Aluminium ducts for OT's in accordance with the approved shop floor drawing complete with all accessories, bends, fittings, specials, chutes, vanes, necessary supports etc. as per specification. |
| 2680 | 20 gauge Aluminium Ducting |
| 2681 | Duct Accoustic Lining (Duct / Plenum & AHU Room) |
| 2682 | Supplying and fixing of acoustic lining of duct with green building complinace self adhesive fire retardent open cell nitrile rubber of density 140-180 Kg/m³ conforming to specification given in the tender. Lining shall have additional supports with the help of woodscrews, rowl plug, dash fasteners, washers etc as required. |
| 2683 | 19 mm thick for Duct & Plenum |
| 2684 | 25 mm thick for AHU Room |
| 2685 | Duct Insulation (For Indoor Application) : Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. All should be in complinace with NIT. |
| 2686 | 19 mm |
| 2687 | 25 mm |
| 2688 | Fire Dampers & Actuator: Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. All should be in complinace with NIT. |
| 2689 | Fire Damper (with sleeve of not less than 450 mm) |
| 2690 | Actuator (Up to 0.8 sq. metre of fire damper, single actuator with required torque to be considered) |
| 2691 | Grilles, Diffusers, VCD |
| 2692 | Supplying & fixing of powder coated extruded aluminium Supply / Return / Exhaust Air Grills WITH aluminium volume control dampers as per specifications. All should be in complinace with NIT. |
| 2693 | Supplying & fixing of powder coated extruded aluminium Supply / Return / Exhaust Air Grills with louvers but WITHOUT volume control dampers complete as required. All should be in complinace with NIT. |
| 2694 | Supplying, fixing testing commissioning of Supply / Return / Exhaust air diffusers of powder coated aluminium WITH aluminium volume control dampers with anti smudge ring & removable core. All should be in complinace with NIT. |
| 2695 | Supplying, fixing testing commissioning of Supply / Return / Exhaust air diffusers of powder coated aluminium WITHOUT volume control dampers with anti smudge ring & removable core. All should be in complinace with NIT. |
| 2696 | Supply, installtion and testing of powder coated aluminium extruded louvers constructed with casing in 16 G & louvers in 16 G construction for supply / exahust air application including bird screen, aluminium volume control dampers, fixing members, rain protector, free area of 55% etc as required to suit the site conditions. All should be in complinace with NIT. |
| 2697 | Supplying, fixing testing commissioning of Supply air jet diffusers / nozzles / drum jet diffuser of minimum 400 mm diameter of powder coated aluminium WITH aluminium volume control dampers with core and associated accesseries. All should be in complinace with NIT. |
| 2698 | GSS Duct Damper |
| 2699 | Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Back draft damper / Non return damper etc shall be considered under this item only. All should be in complinace with NIT. |
| 2700 | Duct Insulation (For Outdoor Application) |
| 2701 | Supplying and fixing 50mm thick aluminium foil faced resin bonded fibre glass insulation (on duct) of density 24 kg/cu.m or mineral wool insulation (non combustible) of density 44 kg/cum after applying two coats of cold setting green building compliance adhesive (CPRX compound) sealing all joints with self adhesive aluminium tape & covering with 0.63mmx19mm GI wire mesh netting & butting all joints and laced with GI wire complete and finally covered with one layer of tar felt stuck with hot bitumen equivalent materials or 26 G aluminium cladding as per specifications and as required. (for outdoor applications). Selected insulation material shall be CFC free. Green building complinace adhesive shall be used. All should be in complinace with NIT. |
| 2702 | Motorised Duct Damper |
| 2703 | Supply, installation, testing and commissioning of Motorized (Modulating Type) duct mounted GI volume control damper to work with CO2 sensros with controllers and necessary control wire (minimum 1.5 sqmm) for integration within AHU room. Cost shall include all associted accesseries as required for smooth functioning of system. All should be in complinace with NIT. |
| 2704 | Damper (with sleeve of not less than 450 mm if installed on wall) |
| 2705 | Actuator (Up to 0.8 sq. metre of damper, single actuator with required torque to be considered) |
| 2706 | Double Layered Flexible Canvass Connection |
| 2707 | Supply, installation, testing and commissioning of double layered flexible canvass connection (900 mm length minimum) made of fibreglass weave having silver grey silicon rubber coating, Flexible connection shall be air tight & water proof and withstand high temperature application, non flammable and does not support combustion. Flexible connection shall be complete with flanges made out of 22G G.S.S sheet on both sides for connection to unit and duct complete with nuts, bolts etc. For all airside equipments this shall be part of equipment. Considered quantity herein shall be installed with duct at building expansion joints in each applicable buildings. All should be in complinace with NIT. |
| 2708 | UNDED DECK INSULATION |
| 2709 | Supplying & fixing of Underdeck insulation on RCC slab ceiling with approved sample of Class \\"O\\" closed cell Nitrile Rubber Insulation with 25 mm Thickness & density 40-55 Kg/Cum .Thermal Conductivity not exceeding 0.035 W/mK at an average Temperature of 0°C. Material shall have fire performance acc. to BS 476 Part 7 & Part 6, water vapour diffusion resistance ( μ factor ) shall be greater than 7000 & tested from third party for the parameteres.Insulation material shall be factory laminated with Aluminium Foil |
| 2710 | AC Plant Room Panel |
| 2711 | Supplying, installation, testing & commissioning of cubical type wall / floor mounted Distribution Panel suitable for 433V, 3 Phase, 4Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type FP Aluminium Alloy bus bars of high conductivity, SMC bus bar supports, with short circuit withstand capacity of 35kA for I Sec. with entire panel shall have a common aluminium earth bus of capacity 25% more than the incomer rating of size 32x6mm or as required at the rear with 2 Nos. earth stud or as required, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, i/c additional NO/NC contacts in all outgoing starters for automatic operation through third party and providing & fixing following switch gears. |
| 2712 | AC panel shall be for following equipment. Drawing to be got approved from Engineer in charge before start of fabrication. Power supply from LT Panel of nearest Sub Station shall be supplied. All should be in complinace with NIT. |
| 2713 | a) 550 TR Centrifugal Chiller with VFD, 350.0 Kw Approx Each, (2W+1S) |
| 2714 | b) CHW Pr. Pump, 30.0 HP Each, (2W+1S) |
| 2715 | c) CHW Sr. Variable Pump, 25.0 HP Each, (2W+1S) |
| 2716 | c) CHW Sr. Variable Pump, 40.0 HP Each, (2W+1S) |
| 2717 | d) CDW Fixed Pump, 40.0 HP Each, (2W+1S) |
| 2718 | e) Cooling Tower 550 TR, 2x15.0 HP Each, (3W+1S) |
| 2719 | f) 250 KW Hot Water Generator, 250.0 Kw Each, (2W+1S) |
| 2720 | g) Hot Water Pump - 10.0 HP Each, (2W+1S) |
| 2721 | A) Incomer |
| 2722 | 3200 A EDO type BMS compitable 4 pole with overload, short ckt., earth fault, protection release, electronic type multifunction meter with CT, phase indication light with SP MCB, on / off / trip indicating light with SP MCB. SET-02 (1W+1S) |
| 2723 | 1000 Amp Active Harmonic Filters. SET-02 (1W+1S) |
| 2724 | B) Bus Coupler |
| 2725 | Bus Coupler for bus section A & B of 3200 A capacity, 4 pole EDO Type ACB. SET-01 |
| 2726 | C) Interlocking |
| 2727 | Incomer and bus coupler shall be mechanically & electrically interlocked to avoid paralleling of the two supplies. LOT-01 |
| 2728 | D) Outgoings |
| 2729 | a) For 3 Nos. 550 TR Water-cooled Centrifugal Chillers with VFD (2W+1S) |
| 2730 | 1250 A EDO type 4 pole BMS compitable ACB with overload, short circuit & earth fault protection, BMS compitable digital energy meter, (0-1250A) ammeter with three CT & selector switch, on / off / trip indication light with SP MCB, single phase preventer & auto / manual mode selector switch for BMS application. SET-04 |
| 2731 | b) For 3 Nos. 30.0 HP Pr. CHW Pumps (2W+1S) |
| 2732 | 63 A TPN MCCB with 32 A star delta starter overload relay, start / stop push buttons, automation compitable dual source energy meter with maximum demand, ammeter (0-63A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch for BMS application. SET-04 |
| 2733 | c) For 3 Nos. 25.0 HP Sr. Variable CHW Pumps (2W+1S) |
| 2734 | 100 A TPN MCCB, automation compitable dual source energy meter with maximum demand, ammeter (0-100A) with three CT & selector switch, on/off indication lights with SP MCB. SET-04 |
| 2735 | c) For 3 Nos. 40.0 HP Sr. Variable CHW Pumps (2W+1S) |
| 2736 | 100 A TPN MCCB, automation compitable dual source energy meter with maximum demand, ammeter (0-100A) with three CT & selector switch, on/off indication lights with SP MCB. SET-04 |
| 2737 | d) For 3 Nos. 40.0 HP Fixed CDW Pumps (2W+1S) |
| 2738 | 125 A TPN MCCB with 63 A star delta starter overload relay, start / stop push buttons, automation compitable dual source energy meter with maximum demand, ammeter (0-125A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch for BMS application. SET-04 |
| 2739 | e) For 3 Nos. Cooling Tower with 2x15.0 HP Motor with VFD (2W+1S) |
| 2740 | 63 A TPN MCCB, automation compitable dual source energy meter with maximum demand, ammeter (0-63A) with three CT & selector switch, on/off indication lights with SP MCB. SET-08 |
| 2741 | f) For 3 Nos. 250 Kw Hot Water Generator (2W+1S) |
| 2742 | 400 A TPN MCCB EDO type BMS compitable with overload, automation compitable dual source energy meter with maximum demand, short circuit & earth fault protection with (0-400A) ammeter with three CT & selector switch, on / off / trip indication light with SP MCB, single phase preventer & auto / manual mode selector switch for BMS application. SET-03 |
| 2743 | g) For 3 Nos. 10.0 HP HW Pumps (2W+1S) |
| 2744 | 32 A TPN MCCB with 25 A DOL starter overload relay, start / stop push buttons, automation compitable dual source energy meter with maximum demand, ammeter (0-32A) with three CT & selector switch, on/off/trip indication lights with SP MCB, single phase preventer & auto / manual mode selector switch for BMS application. SET-04 |
| 2745 | Controls & interlocking accessories as required for all the above shall be included in costing. |
| 2746 | Electrical Starter Panel for AHU / Fan |
| 2747 | Supplying, installation, testing & commissioning of cubical type wall / floor mounted Distribution Panel suitable for 433V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type FP Aluminium Alloy bus bars of high conductivity, SMC bus bar supports, with short circuit withstand capacity of 35kA for I Sec. with entire panel shall have a common Aluminium earth bus of size 32x6mm or as required at the rear with 2 Nos. earth stud or as required, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 1.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, i/c additional NO / NC contacts in all outgoing starters for automatic operation through third party and providing & fixing following switch gears & each panel to have the following. All should be in complinace with NIT. |
| 2748 | For AHU OR axial fan Motor Up to 3.73 Kw |
| 2749 | 40 A TPN MCCB with 25 A DOL starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2750 | Necessary contactors with overload relay and other accessories as required as bypass arrangement for smooth functioning of the equipment incase of VFD failure to be included. SET-01 |
| 2751 | 6 A SP MCB with control transformer 230/24 V, auxilary relay etc for Fire Damper & Interlocking. SET-01 + 01 Spare |
| 2752 | 6 A SP MCB. SET-01 for UVGI |
| 2753 | For AHU or Axial fan Motor of 7.5 Kw / 9.33 Kw / 11.19 Kw |
| 2754 | 63 A TPN MCCB with 25 A Star delta starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2755 | Necessary contactors with overload relay and other accessories as required as bypass arrangement for smooth functioning of the equipment incase of VFD failure to be included. SET-01 |
| 2756 | 6 A SP MCB with control transformer 230/24 V, auxilary relay etc for Fire Damper & Interlocking. SET-01 + 01 Spare |
| 2757 | 6 A SP MCB. SET-01 for UVGI |
| 2758 | For AHU & Axial fan Motor of 15.0 Kw |
| 2759 | 100 A TPN MCCB with 25 A Starter Delta starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2760 | Necessary contactors with overload relay and other accessories as required as bypass arrangement for smooth functioning of the equipment incase of VFD failure to be included. SET-01 |
| 2761 | 6 A SP MCB with control transformer 230/24 V, auxilary relay etc for Fire Damper & Interlocking. SET-01 + 01 Spare |
| 2762 | 6 A SP MCB. SET-01 for UVGI |
| 2763 | Fan Motor 1x 3.7 Kw, For LT Panel Room |
| 2764 | 25 A TPN MCB with 16 A DOL starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2765 | For Fan Motor, 1x5.6 Kw AWS + 1x7.5 Kw Dry Scrubber with 2 Nos. SP Pump (1W+1S) - Kitchen Ventilation |
| 2766 | A) Incomer |
| 2767 | 100 A TPN MCCB with (0-100A) ammeter with three CT and selector switch, (0 - 500 V) voltmeter with selector switch, phase indication light with SP MCB. SET-01 |
| 2768 | B) Outgoings |
| 2769 | a) For Fan Motor of 7.5 Kw |
| 2770 | 40 A TPN MCB with 16 A Star Delta starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2771 | b) For Fan Motor of 5.60 Kw |
| 2772 | 40 A TPN MCB with 25 A DOL starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2773 | c) For Pump of SP (1W+1S) |
| 2774 | 25 A SP MCB, including the necessary devices required for dry run protection of pumps. SET-02 |
| 2775 | For Fan Motor Up to 3.73 Kw |
| 2776 | 32 A TPN MCCB with 16 A DOL starter, overload relay, start / stop push buttons, phase indication lights with SP MCB, on / off / trip indication lights with SP MCB, single phase preventer, control transformer 230/24 V, auxilary relay & auto / manual mode selector switch for automation application for BMS application. SET-01 |
| 2777 | For Fan Motor of 5.60 Kw |
| 2778 | Power & Control Cabling |
| 2779 | Armoured Aluminium Power Conductor: Supplying and laying of following sizes and core FRLS PVC / XLPE insulated PVC sheathed, heavy duty cables of 1.1 KV, armoured electrical cable with aluminium conductor in the existing masonary open duct / cable tray as required. All should be in complinace with NIT. |
| 2780 | For Chillers & HW Generators |
| 2781 | 2 x 3.5C x 300 Sq. mm |
| 2782 | For Motor of 56 Kw |
| 2783 | 2 x 3C x 70 Sq. mm |
| 2784 | For Motor of 45 Kw |
| 2785 | 2 x 3C x 50 Sq. mm |
| 2786 | For Motor of 29 Kw / 37 Kw |
| 2787 | 2 x 3C x 35 Sq. mm |
| 2788 | For Motor of 22 Kw / 26 Kw |
| 2789 | 2 x 3C x 25 Sq. mm |
| 2790 | For Motor of 15 Kw / 19 Kw |
| 2791 | 2 x 3C x 16 Sq. mm |
| 2792 | 2 x 3C x 6 Sq. mm, Fire Survival Cable for Smoke Ventilation & Pressurisation Fan |
| 2793 | For Motor of 5.6 Kw |
| 2794 | 1 x 3C x 6 Sq. mm, Fire Survival Cable for Smoke Ventilation & Pressurisation Fan |
| 2795 | For Motor of 3.7 Kw |
| 2796 | 1 x 3C x 4 Sq. mm |
| 2797 | 1 x 3C x 4 Sq. mm, Fire Survival Cable for Smoke Ventilation & Pressurisation Fan |
| 2798 | Copper Flexible Cable : Supplying and laying of following XLPE / PVC insulated Copper flexible cables 650 / 1100 volts complete with clamps, saddles, cable glands, thimble etc. including effecting proper connection to the equipment as required. All should be in complinace with NIT. |
| 2799 | For Inline Fan / Propeller Fan / CHW Hi Wall & Cassette Unit / SP Pump / Precision Unit IDU / Hi Wall ODU etc |
| 2800 | 1 x 3C x 2.5 Sq. mm Copper Flexible Cable |
| 2801 | 1 x 3C x 4.0 Sq. mm Copper Flexible Cable |
| 2802 | 1 x 3 C x 6.0 Sq. mm Copper Flexible Cable |
| 2803 | 1 x 3 C x 10.0 Sq. mm Copper Flexible Cable |
| 2804 | 1 x 3 C x 16.0 Sq. mm Copper Flexible Cable |
| 2805 | Control cabling : Supplying and laying of following XLPE / PVC insulated Copper conductor of 1.1 KV Grade armoured cable complete with clamps, saddles, cable glands, thimble etc. including effecting proper connection to the equipment as required. All should be in complinace with NIT. |
| 2806 | 3C x 1.5 Sq. mm |
| 2807 | 4C x 1.5 Sq. mm |
| 2808 | 5C x 1.5 Sq. mm |
| 2809 | 5C x 2.5 Sq. mm |
| 2810 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. All should be in complinace with NIT. |
| 2811 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. All should be in complinace with NIT. |
| 2812 | Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006. All should be in complinace with NIT. |
| 2813 | Cable Tray- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray including tee, bends, reducer, cross etc (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. All should be in complinace with NIT. |
| 2814 | 100 mm wide x 50 mm depth x 1.6 mm thickness. |
| 2815 | 150 mm wide x 50 mm depth x 1.6 mm thickness. |
| 2816 | 300 mm wide x 50 mm depth x 1.6 mm thickness. |
| 2817 | 450 mm wide x 50 mm depth x 2.0 mm thickness. |
| 2818 | 600 mm wide x 50 mm depth x 2.0 mm thickness. |
| 2819 | Modular Operation Theatre -(5+1=6) Nos |
| 2820 | Wall Panelling System (SS) complete as per tender Specification |
| 2821 | False ceiling system a per tender specification |
| 2822 | PVC Flooring as per tender Specification |
| 2823 | Self-Levelling Compound for each MOT |
| 2824 | Laminar Flow Air System as per tender Specification |
| 2825 | Exhaust Cabinets and AC Ducting (Inside MOT) as per tender specification for each MOT |
| 2826 | Control cabling from MOT control panel to AHU & associated sensors for controlling teemperature and RH inside the MOT |
| 2827 | Hermetically Sealed Door {Size 2.1m(H) x 1.8m(W)} with leadlines as per tender Specification |
| 2828 | Hermetically Sealed Door {Size 2.1m(H) x 1 m(W)} with leadlines as per tender Specification |
| 2829 | Hermetically Sealed Door {Size 2.1m(H) x 1.8m(W)} with leadlines as per tender Specification |
| 2830 | Hermetically Sealed Door {Size 2.1m(H) x 1 m(W)} with leadlines as per tender Specification |
| 2831 | View Window with motorized blinds (Price to be quoted seperarely and will be considered for price ranking) |
| 2832 | Touch screen control panel as per tender Specification |
| 2833 | Pressure Relief Dampers as per tender Specification |
| 2834 | Hatch Boxes as per tender Specification for one MOT |
| 2835 | Hatch Boxes as per tender Specification for five MOT |
| 2836 | Operating List Board as per tender Specification |
| 2837 | X Ray Film Viewer as per tender Specification |
| 2838 | Scrub Station as per tender specification |
| 2839 | Storage Shelves as per tender Specification |
| 2840 | Double Arm Moveable Pendent Arm Pendent for Anaesthetist as per specification |
| 2841 | Double Arm Moveable Pendent for Surgeon as per specification |
| 2842 | Peripheral Lighting and Clean Room Luminaries as per tender Specification |
| 2843 | Electrical Installations (Distribution Board, Internal wiring, cable tray, etc) as per tender specification |
| 2844 | Distribution Box (Raw Power &UPS) |
| 2845 | Isolation Panel System |
| 2846 | Online UPS (For all MOTs) |
| 2847 | Medical Gas Pipeline Interconnection as per specification for each MOT |
| 2848 | HD Recorder with 19 inch Monitor |
| 2849 | 4K LED screen as per specification |
| 2850 | Civil works inside the MOT |
| 2851 | FURNITURE |
| 2852 | ROUND TABLE FOR MEETING ROOMSIZE:1200@DIAX750HTTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges End Legs: MS powder coated legs. Wire Management: 300mm Aluminium Flip Up and provision to mount switches and sockets on PVC cable dump. Wire Entry: Vertical Wire Entry Cover or Vertebra |
| 2853 | CHAIR FOR MEETING ROOM. MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2854 | TABLE FOR CONFERENCE ROOMSIZE: 4800LX1500DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management: 450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry / vertical wire entry cover considered. |
| 2855 | HEAD CHAIR FOR CONFERENCE ROOMHB ML 2D' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention High Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel)*Chrome Base *Leatherette Seat & Back |
| 2856 | CHAIR FOR CONFERENCE ROOM MB ML' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention Medium Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel) *Chrome Base *Leatherette Seat & Back |
| 2857 | TABLE FOR STAFF DINING AREA / VISITORS DINING AREA SIZE: 1800LX800DX750HT METAL STRAIGHT LEGSTable top : made up of 18mm thick Hydroshield topUnderstructure: supported on MS powdercoated Straight leg with MS support beam |
| 2858 | TABLE FOR DOCTORS EXECUTIVES DINING AREA / VIP DINING AREA / VISITORS DINING AREA / STAFF DINING AREA SIZE: 1200LX800DX750HTMETAL STRAIGHT LEGSTable top : made up of 18mm thick Hydroshield topUnderstructure: supported on MS powdercoated Straight leg with MS support beam |
| 2859 | CHAIR FOR DOCTORS EXECUTIVES DINING AREA / VIP DONING AREA / VISITORS DINING AREA / STAFF DINING AREA *Cafeteria Stackable Chair* Polypropylene Seat & Back* Powdercoated Sledge Legs Colour : Black , White , Red, Orange & Green |
| 2860 | STORAGE FOR STAFF DINING AREASIZE: 1200LX450DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2861 | STORAGE FOR VISITOR DINING AREA / DOCTORS EXECUTIVES DINING AREA SIZE: 1800LX450DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2862 | TABLE FOR CASHIER / PATIENT TAGGING / FRONT DESK / SEVA-VRATI COUNTER / RECEPTION & SUB WAITING / HELP/MIHY/PMJAY COUNTERS / PHARMACY AND STORE / NIGHT MEDICAL COUNTER TAKE AWAY / SEMINAR ROOM / NURSE STATION / LINEN STORESIZE: 1500LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2863 | CHAIR FOR CASHIER / PATIENT TAGGING / FRONT DESK / SEVA-VRATI COUNTER / RECEPTION & SUB WAITING / HELP/MIHY/PMJAY COUNTERS / PHARMACY AND STORE / NIGHT MEDICAL COUNTER TAKE AWAY / SEMINAR ROOM / NURSE STATION . MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2864 | STORAGE FOR NURSE STATION MEDICINE PREPARATION / HELP/MIHY/PMJAY COUNTERS SIZE: 1200LX600DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2865 | STORAGE FOR LINEN STORE / SUIT ROOM SIZE: 1500LX600DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2866 | STORAGE FOR DETERGENT SIZE: 600LX450DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2867 | STORAGE FOR SUIT ROOM SIZE: 1050LX450DX1200HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2868 | TABLE FOR LAUNDRY MANAGERSIZE: 1500LX600DX750HTCOMPOSITE STORAGE: 900LX450DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump.COMPOSITE STORAGE: Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2869 | CHAIR FOR LAUNDRY MANAGER. MBGS ADJ ARMS WITH HEADREST* . Medium Back Mesh Chair* Headrest* AC 60 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base * Fabric Upholstered Cushion Seat |
| 2870 | VISITOR CHAIR FOR LAUNDRY MANAGERFXD ARMS* . Medium Back Mesh Visitor Chair * AC 60 Mesh * Adjustable Lumbar Support* Fixed Arms * Powder Coated Sledge Base* Fabric Upholstered Cushion Seat |
| 2871 | 3 SEATER TANDEM FOR WAITNG AREA / GOWNED WAITING / PHARMACY AND STORE WAITING AREA / GENERAL WAITING / RELATIVE WAITING Armrest/leg: Metal Paint, Sprayed with static powder after antirust treatmentSeat: 1.8mm thickness metal with round hole. Sprayed with static powder after antirust treatmentBeam: 1.8mm thickness. Sprayed with static powder after antirust treatment |
| 2872 | 2 SEATER TANDEM FOR WAITNG AREA / GOWNED WAITING / RECEPTION & SUB WAITING / GENERAL WAITING / IPD / INSURANCE & PMJAY / OPD GENERAL WAITING / SUB-WAITING / RELATIVE WAITING Armrest/leg: Metal Paint, Sprayed with static powder after antirust treatmentSeat: 1.8mm thickness metal with round hole. Sprayed with static powder after antirust treatmentBeam: 1.8mm thickness. Sprayed with static powder after antirust treatment |
| 2873 | CABIN TABLE FOR CASUALTY MEDICAL OFFICER / CONSULTATION TELE-MEDICINE / RADIOLOGIST ROOM / MANAGER / CONSULTATION 2 / OPD MANAGER / SINGLE CONSULTANT / PROCEDURE ROOM / CONSULTANT CABIN / DNB ROOM / COUNSELING / BRONCHOSCOPY / HOD CABIN / DNB ROOM / CONSULT ROOM / DUTY DOCTOR ROOM FEMALE / DUTY DOCTOR / SEMINAR ROOM / CSSD MANAGER / MANAGER ROOM / HOD 7 & 8 / IT INCHARGE / DOCTOR DUTY ROOM / HW INCHARGE SIZE: 1500LX600DX750HTCOMPOSITE STORAGE: 900LX450DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump.COMPOSITE STORAGE: Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2874 | CHAIR FOR CASUALTY MEDICAL OFFICER / CONSULTATION TELE-MEDICINE / RADIOLOGIST ROOM / MANAGER / CONSULTATION 2 / OPD MANAGER / SINGLE CONSULTANT / PROCEDURE ROOM / CONSULTANT CABIN / DNB ROOM / COUNSELING / BRONCHOSCOPY / HOD CABIN / DNB ROOM / CONSULT ROOM / DUTY DOCTOR ROOM FEMALE / DUTY DOCTOR / SEMINAR ROOM / CSSD MANAGER / MANAGER ROOM / HOD 7 & 8 / IT INCHARGE / DOCTOR DUTY ROOM / HW INCHARGE / . MBGS ADJ ARMS WITH HEADREST* . Medium Back Mesh Chair* Headrest* AC 60 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base * Fabric Upholstered Cushion Seat |
| 2875 | VISITOR CHAIR FOR CASUALTY MEDICAL OFFICER / CONSULTATION TELE-MEDICINE / RADIOLOGIST ROOM / MANAGER / CONSULTATION 2 / OPD MANAGER / SINGLE CONSULTANT / PROCEDURE ROOM / CONSULTANT CABIN / DNB ROOM / COUNSELING / BRONCHOSCOPY / HOD CABIN / DNB ROOM / CONSULT ROOM / DUTY DOCTOR ROOM FEMALE / DUTY DOCTOR / CSSD MANAGER / MANAGER ROOM / HOD 7 & 8 / IT INCHARGE / DOCTOR DUTY ROOM / HW INCHARGE /. VA FXD ARMS* . Medium Back Mesh Visitor Chair * AC 60 Mesh * Adjustable Lumbar Support* Fixed Arms * Powder Coated Sledge Base* Fabric Upholstered Cushion Seat |
| 2876 | TABLE FOR DUTY DOCTOR ROOM / OFFICE & HOLDER READING / OFFICE AND REPORTING / OT MANAGER / HOD 4 / HOD 2,3 &4 / CEO / COO / MATRON / DEPUTY MATRON SIZE: 1800LX900DX750HT WITH FIXED SIDE STORAGETable Top: 25mm thick pre laminated particle board with matching PVC edge lipping Support: 25mm thick pre particle board with matching PVC edge lipping Modesty Panel: 1200 x 450HT- 18mm thick pre particle board modesty panel of 450mm Ht. Side Screen: 25mm thick pre lam particle board with matching PVC edge Lipping Side Storage: 25mm thick pre lmainated particle board with sliding shutters. Wire Management: 300 aluminium flip up with soft closure and provision to mount switches and sockets on PVC cable dump |
| 2877 | CHAIR FOR DUTY DOCTOR ROOM / OFFICE & HOLDER READING / OFFICE AND REPORTING / OT MANAGER / HOD 4 / HOD 2,3 & 4 / CEO / COO / MATRON / DEPUTY MATRON ML 2D' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'* High Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel)*Chrome Base *Leatherette Seat & Back |
| 2878 | VISITOR FOR DUTY DOCTOR ROOM / OFFICE & HOLDER READING / OFFICE AND REPORTING / OT MANAGER / HOD 4 / HOD 2,3 & 4/ CEO / COO / MATRON / DEPUTY MATRON /FXD ARMS - LEATHERETTE SEAT & BACK*Visitors Chair *Chromeplated Sledge Base * Fixed Arms *Leatherette Seat & Back |
| 2879 | TABLE FOR OBSERVATION & PPE / INTENSIVIST /REPORTING ROOMSIZE: 1800LX750DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2880 | CHAIR FOR OBSERVATION & PPE / INTENSIVIST / REPORTING ROOM* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2881 | TABLE FOR COMMON CONSOLE SIZE: 1500LX750DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump. |
| 2882 | ROUND TABLE FOR DEMONSTRATION & DISCUSSION ROOMSIZE: 1050DIAX750HTTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges End Legs: MS powder coated legs. Wire Management: 300mm Aluminium Flip Up and provision to mount switches and sockets on PVC cable dump. Wire Entry: Vertical Wire Entry Cover or Vertebra |
| 2883 | SIZE: 1200LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2884 | TABLE FOR USG / 2D ECHO SIZE: 625W X 500D X 750HT Table Top : Made of 25 MM Thick particle board with 2 MM PVC Edge band.LEGS : Legs Made up of 40 x 40 x 1.6 MM Thk tube with Die cast Connector connecting leg and beams With LevellerBeams : Made of 40 x 20 x 1.6 MM THK tube connecting to leg with Die cast connectors Shelf : Mesh Tray Provided below table |
| 2885 | CHAIR FOR COMMON CONSOLE / DEMONSTRATION & DISCUSSION ROOM / USG / ECHO* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2886 | RECEPTION TABLE SIZE: 1800LX750DX1050HTRECEPTION TABLE Specifications - Made up of prelam particle boardPrelam hanging drawer 2 Numbers |
| 2887 | RECEPTION & SUB WAITINGRECEPTION -2SIZE: 1500LX750DX1050HTSpecifications - Made up of prelam particle boardPrelam hanging drawer 2 Numbers |
| 2888 | CHAIR FOR RECEPTION TABLE / RECEPTION & SUB WAITING. MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2889 | 3 SEATER SOFA FOR HEALTH CHECK/ SINGLE CONSULTANT / DOCTOR LOUNGE/ WAITING AREA Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes. |
| 2890 | 2 SEATER SOFA FOR WAITING AREA /INTENSIVIST / DNB ROOM / COO / MATRON / MANAGER ROOM & 8 / SUIT ROOM /DOCTOR LOUNGE Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes. |
| 2891 | 3 SEATER SOFA FOR VIP WAITING MODEL:BARISTERSeat Foam: the sofa is made up of 100% pure leather.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of solid wood having pu matt finish. |
| 2892 | 2 SEATER SOFA FOR VIP WAITING / VIP GUEST ROOM / HOD CAIN / CEO / HOD 2, 3, 4, 7, 8 / COOSeat Foam: the sofa is made up of 100% pure leather.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of solid wood having pu matt finish. |
| 2893 | CORNER TABLE FOR HEALTH CHECK / HOD CABIN / HOD 2,3 &4 / CEO / COO / MATRON / MANAGER ROOM / HOD 7 & 8 CORNER TABLESize : 600 x45X450HT The overall size of the table shall be 600 mm Length x 450 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The Chair understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side. The manufacturer shall have quality & safety related prevalent certifications of BIFMA Level-2, Green Guard Gold Certificate and IGBC Gold rated manufacturing facility. |
| 2894 | CENTER TABLE FOR HEALTH CHECK / INTENSIVIST / WAITING AREA CENTER TABLESize : 1050 x525X450HT The overall size of the Centre table shall be 1050 mm Length x 525 mm depth, 450 mm height. the table top shall be made up of 18mm thick prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The Chair understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on the top & thinner on the bottom side. The manufacturer shall have quality & safety related prevalent certifications of BIFMA Level-2, Green Guard Gold Certificate and IGBC Gold rated manufacturing facility. |
| 2895 | ROUND CENTER TABLE FOR VIP GUEST ROOM / / SUIT ROOM CENTRE TABLE-ROUND SHAPE SIZE:-600WX600DX 450HFor Cafeterias - 25mm thk prelaminated particle board with 2mm edge banding finishUnderstructure: supported on MS powdercoated leg . |
| 2896 | TABLE FOR N.I.CARDIOLOGY REPORT WRITING / SAMPLE COLLECTION / CASH COLLECTION SIZE: 1350LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2897 | CHAIR FOR N.I.CARDIOLOGY REPORT WRITING / SAMPLE COLLECTION / CASH COLLECTION . MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2898 | RECEPTION FOR RECEPTION & REPORT WRITINGRECEPTION -2SIZE:2400WX750DX1050HTSIDE STORAGE:1500WX450DX750HTSpecifications - Made up of prelam particle boardPrelam hanging drawer 2 NumbersSIDE STORAGE: Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2899 | BACK STORAGE RECEPTION & REPORT WRITINGSIZE: 2400LX450DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2900 | TABLE FOR DISCUSSION ROOMSIZE: 4800LX900DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management: 450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry / vertical wire entry cover considered. |
| 2901 | CHAIR FOR DISCUSSION ROOM. MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2902 | WORKSTATION FOR BACK OFFICESIZE: 1500LX600DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm)Wire Management 250mm Ht Racway with 65mm Dia Wire Manager Grommet Specifications Vertical Raceway with built in separator for power and data of size 250H X 70mm thick with provision to mount swicthes and sockets on laminate facia with Vertical Wire Entry cover for wire uptake from floor to raceway with 65mm Dia Wire Manager Grommet. SCREEN: ALUMINIUM 30MM SCREEN WITH SPLIT TILES alf Fabric magnetic and half Glass marker |
| 2903 | TABLE FOR INSURANCE & PMJAY SIZE: 1500LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2904 | PARTITIONSIZE:1200WX50DX1200HTPartition: Height - 1200mm frame with top and sides in Aluminium trims and junctions with diecast caps. |
| 2905 | CHAIR FOR INSURANCE & PMJAY / BACK OFFICE. MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2906 | VISITOR CHAIR FOR INSURANCE & PMJAY. VA FXD ARMS* . Medium Back Mesh Visitor Chair * AC 60 Mesh * Adjustable Lumbar Support* Fixed Arms * Powder Coated Sledge Base* Fabric Upholstered Cushion Seat |
| 2907 | BACK STORAGE HOD CABINSIZE: 1800LX600DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2908 | SIDE STORAGE HOD CABINSIZE: 2100LX600DX750HT Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2909 | TABLE FOR CABIN 1,2,3,4,5 & 6 SIZE: 2100LX750DX750HTCOMPOSITE STORAGE: 1200LX450DX750HT WITH EXTENDED TOPBACK STORAGE: 2700LX450DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump.COMPOSITE STORAGE & BACK STORAGE: Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2910 | CHAIR FOR CABIN 1,2,3,4,5 & 6 CLICK HBGS ADJ ARMS* Click High Back Chair * Single Lock Synchro Mechanism* One Way Adjustable Arms ( Height)* Nylon Base * Fabric Upholstered Cushion Seat & Back |
| 2911 | VISITOR CHAIR FOR CABIN 1,2,3,4,5 & 6 CLICK VA FXD ARMS With PC Legs * Click Low Back Visitors chair * Powdercoated Sledge Base * Fixed Arms * Fabric Upholstered Cushion Seat & Back |
| 2912 | TABLE FOR MEETING ROOMSIZE: 2100LX900DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management: 450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry / vertical wire entry cover considered. |
| 2913 | CHAIR FOR MEETING ROOMADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention Medium Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel) *Chrome Base *Leatherette Seat & Back |
| 2914 | TABLE FOR CLASSROOM-1,2,3 & 4SIZE: 1500LX750DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump. |
| 2915 | CHAIR FOR CLASSROOM-1,2,3 & 4.ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2916 | STUDENT CHAIR WITH WRITING DESK FOR CLASSROOM-1,2,3 & 4*Genius Stackable Chair *Powdercoated Legs *Writing DeskColour : Black & White |
| 2917 | TABLE FOR CONSOLESIZE: 2100LX750DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2918 | CHAIR FOR CONSOLE. ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2919 | TABLE FOR ICU NURSE STATIONSIZE: 1500LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2920 | TABLE FOR NURSE STATIONSIZE: 1500LX750DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2921 | CHAIR FOR ICU NURSE STATIONCLICK MBGS ADJ ARMS* Click Medium Back Chair * Single Lock Synchro Mechanism* One Way Adjustable Arms ( Height) * Nylon Base * Fabric Upholstered Cushion Seat & Back |
| 2922 | BED FOR ICU RELATIVE WAITING BUNK BEDS SIZE:2060L X 900D X2015HBunk BedOverall size of the Cot – 2060L x 900D x 2015mm H The design is a modular & minimalist design, quick & easy to assemble, weldless technology, stable & sturdy.Vertical Tubes are from Sq.40x40mm thk tubes and horizontal beams are Rectangular tubular profiles of 60x40 confirming to IS 4923:2017. All 04 vertical sections/legs are connected to to form the under-structure, confirming to IS 4923:2017 grade.Beam to beam are connected by cross beams of Sq.20mm ERW tube confirming to IS 4923:2017, which supports the mattress platform. Mattress platform is of 12mm thk plywood sheet. Product comes with bed side support for safety at second level. The ladder is provided on one of the sides of the bunk bed. The bed side support & ladder are from MS ERW tubes. Enough space is given between the two levels of beds that enables the to sit & work or study comfortabely. All metal parts comes with powder coating finish 60-80 microns thk.The legs are fitted with PPGF moulded leg bushes & levellers to adjust heights upto 20mm based on ground undulations. |
| 2923 | TABLE FOR NURSE MANAGERSIZE: 1500LX600DX750HTSIDE STORAGE: 600LX450DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: Flip up with cable dump.SIDE STORAGE: Top & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2924 | CHAIR FOR NURSE MANAGER ADJ ARMS* Click High Back Chair * Single Lock Synchro Mechanism* One Way Adjustable Arms ( Height)* Nylon Base * Fabric Upholstered Cushion Seat & Back |
| 2925 | VISITOR CHAIR FOR NURSE MANAGERFXD ARMS With PC Legs * Click Low Back Visitors chair * Powdercoated Sledge Base * Fixed Arms * Fabric Upholstered Cushion Seat & Back |
| 2926 | TABLE FOR SEMINAR ROOM SIZE: 1050WX750DX750HTTable top - 25mm thk prelam partical board of E1 norm, with 2mm thk PVC edge binding all aroundUnder-structure comes with Angular Legs, made of MS ERW Oval tubes of 1.6mm(16g)thk, fixed with Castors for smooth movements.Legs and top support beam are connected by diecast aluminium connectors to offer sturdy & robust joint. Top support beam is a MS ERW tube of 1.6mm (16g) thk, to offer adequate stability.Design allows to nest the tables when not in use, as table top is foldable. All metal parts are powder coated to 60-80 microns. |
| 2927 | CHAIR FOR SEMINAR ROOM ML' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention Medium Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel) *Chrome Base *Leatherette Seat & Back |
| 2928 | SINGLE BED FOR DNB ROOM |
| 2929 | BED SIDE STORAGE FOR DNB ROOM |
| 2930 | SINGLE BED FOR DORMITORY (MALE) / (FEMALE) / SIZE:2060L X 900D X 400-750HOverall size of the Cot – 2060L x 900D x 750mm H (Bed height w/o mattress comes to about 400mm)The cot design is modular & minimalistic, quick & easy to assemble, stable & sturdy to take adequate weight.Verticals are from Sq.40x40x1.60mm thk (16g) tubes and horizontal beams are Rectangular tubular profiles of 60x40 confirming to IS 4923:2017. All 04 vertical sections/legs are connected to to form the under-structure, confirming to IS 4923:2017 grade.Beam to beam are connected by cross beams of Sq.20mm ERW tube confirming to IS 4923:2017, which supports the mattress platform. Mattress platform is of 12mm thk plywood sheet. All metal parts comes with powder coating finish 60-80 microns thk.The legs are fitted with PPGF moulded leg bushes & levellers to adjust heights upto 20mm based on ground undulations. |
| 2931 | SIDE STORAGE FOR DORMITORY (MALE) / (FEMALE) /SIZE: 600LX600DX1200HTTop & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2932 | L SHAPE WORKSTATION FOR DOCTOR CABINS / STAFF / HR DEPARTMENT / WORK STATION / ASSISTANT / SIZE: 1500/1500LX600DX750/1200HT Partition: Height - 1200mm frame with top and sides in Aluminium trims and junctions with diecast caps. Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: 18mm thick pre laminated gable ends. Wiremanagement : 65mm Grommet cap on table & One metal raceway tile to mount switches below table top level for power and skirting tile for data. Tile Finishes : Above table top Level: Fabric Tiles, one glass marker tile & one magnetic tile per workstation. Below table Top level: Pre-Laminated tiles and metal skirting tile on Main spine towards user. |
| 2933 | LINEAR WORKSTATION FOR STAFFSIZE: 1350LX600DX750HT Partition: Height - 1200mm frame with top and sides in Aluminium trims and junctions with diecast caps. Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: 18mm thick pre laminated gable ends. Wiremanagement : 65mm Grommet cap on table & One metal raceway tile to mount switches below table top level for power and skirting tile for data. Tile Finishes : Above table top Level: Fabric Tiles, one glass marker tile & one magnetic tile per workstation. Below table Top level: Pre-Laminated tiles and metal skirting tile on Main spine towards user. |
| 2934 | LINEAR WORKSTATION FOR TRAINING ROOM / WORKSTATION / CALL CENTER SIZE: 1200LX600DX750HT Partition: Height - 1200mm frame with top and sides in Aluminium trims and junctions with diecast caps. Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: 18mm thick pre laminated gable ends. Wiremanagement : 65mm Grommet cap on table & One metal raceway tile to mount switches below table top level for power and skirting tile for data. Tile Finishes : Above table top Level: Fabric Tiles, one glass marker tile & one magnetic tile per workstation. Below table Top level: Pre-Laminated tiles and metal skirting tile on Main spine towards user. |
| 2935 | CHAIR FOR WORKSTATION DOCTOR CABINS / STAFF / HR DEPARTMENT / WORK STATION / ASSISTANT . MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2936 | PEDESTAL FOR WORKSTATION DOCTOR CABINS / STAFF / MANAGER ROOM / HOD 7 & 8 / SEMINAR ROOM SIZE: 400LX450DX600HTTop & Sides : 18mm Thk pre laminated particle board Back : 9mm Thk pre laminated particle board Shutters : 18mm Thk pre laminated particle board Edge : All exposed area with 2mm thick PVC edge lipping Handle : Finger groove handle Lock : Regular lock |
| 2937 | TABLE FOR BOARD ROOM/SME DISCUSSION ROOMSIZE: 4800LX1200DX750HTTable top: Shall be made of 25 mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support shall be made up of 25mm thick PLT gable end. Modesty Panel shall be made up of 18mm thick 450mm ht plt modesty panel should be considered. It shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Wire Management: 450 mm Anodised flip up Made of Aluminum in anodised finish, that shall have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry. The manufacturer shall have BIFMA Level 2 Certification, Green Guard Gold Certification, AIOTA Certification, Griha Certification & IGBC gold rated manufacturing plant. |
| 2938 | HEAD CHAIR FOR BOARD ROOM/SME DISCUSSION ROOM ML 2D' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention High Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel)*Chrome Base *Leatherette Seat & Back |
| 2939 | CHAIR FOR BOARD ROOM/SME DISCUSSION ROOM' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention Medium Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel) *Chrome Base *Leatherette Seat & Back |
| 2940 | DOUBLE BED FOR VIP GUEST ROOM / SUIT ROOM / SINGLE ROOM /SIZE:2030L X 1575D X 415 /750HThe head rest, foot rest & bed side panels are from 25mm thk, E1 grade, particle board prelaminated on two sides, with rounded corners. The storage - drawer units and center panels are of 18mm thk prelam particle board.Height of head rest panel is 750mm and of foot rest is 450mm. The inner structure of the cot has a metal tubular frame work, Tubes are confirming to IS 4923:1997, it is in-addition to center panels of prelaminated particle board. Cot comes with two movable storage units, each of size 980mm L x 750mm D x 275mm H, fixed with castor wheels for easy accessability and mobility. The storage units designed to accomodate on either side (left side or right side) of the cot depending upon the clients requirement. The storage facia comes with flush handle as a standard offering. The foot rest & head rest panels comes with adjustable levellers. Mattress base or platform is of 18mm thk prelam particle board in white laminate finish. |
| 2941 | BED SIDE STORGAE FOR VIP GUEST ROOM / SUIT ROOM / SINGLE / ROOMSIZE: 450LX450DX510HTBED SIDE STORAGE Configuration - 1 Drawer on Top + Open shelf belowBody - made up of 18MM Thk Prelaminated Particle Board with 2 MM PVC Edge banding Drawer - With full panel drawer slides and Finger groove handle with cam Lock Finish - As per Approved Shade |
| 2942 | ROUND TABLE FOR VIP GUEST ROOM / SUIT ROOM MODEL:CENTRE TABLE-ROUND SHAPE SIZE:-600WX600DX 450HFor Cafeterias - 25mm thk prelaminated particle board with 2mm edge banding finishUnderstructure: supported on MS powdercoated leg . |
| 2943 | CHAIR FOR VIP GUEST ROOM / SUIT ROOM /MODEL:CLARA 'PC' 4 LEGS * Lounge Single Seater Sofa* Fabric / Leatherette Upholstered Cushion |
| 2944 | CHAIR FOR FUNCTION HALL 1 & 2MODEL:FORUM VA PC 4 LEGS FXD ARMS SLEDGE BASE* Forum Low Mesh Back Visitor Chair* AN 70 Mesh * Fixed Arms * Powdercoated Sledge Base* Fabric Upholstered Cushion Seat |
| 2945 | TABLE FOR CONFERENCE ROOMSIZE: 5400LX1200DX750HT Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Wire Management: 450mm Aluminium flipup with soft closure and provision to mount switches and sockets on Cable tray & Intermediate leg with wire entry / vertical wire entry cover considered. |
| 2946 | HEAD CHAIR FOR CONFERENCE ROOM HB ML 2D' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention High Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel)*Chrome Base *Leatherette Seat & Back |
| 2947 | SIDE CHAIR FOR CONFERENCE ROOMMB ML' ADJ ARMS - LEATHERETTE SEAT & BACK 'CB'*FP Invention Medium Back Chair *Multilock Mechanism *Two Way Adjustable Arms (Height & Swivel) *Chrome Base *Leatherette Seat & Back |
| 2948 | TABLE FOR MEETING ROOMSIZE: 900LX900DX750HTPERFORM - METAL STRAIGHT LEGSTable top : made up of 18mm thick Hydroshield topUnderstructure: supported on MS powdercoated Straight leg with MS support beam |
| 2949 | CHAIR FOR MEETING ROOM. MBGS ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2950 | CHAIR FOR CONVENTION HALL * Click Medium back auditorium chair * Tip up seat* Fixed Arms * Fabric Upholstered Cushion Seat |
| 2951 | TABLE FOR SEMINAR ROOMSIZE: 1500LX750DX750HTTable top - 25mm thk prelam partical board of E1 norm, with 2mm thk PVC edge binding all aroundUnder-structure comes with Angular Legs, made of MS ERW Oval tubes of 1.6mm(16g)thk, fixed with Castors for smooth movements.Legs and top support beam are connected by diecast aluminium connectors to offer sturdy & robust joint. Top support beam is a MS ERW tube of 1.6mm (16g) thk, to offer adequate stability.Design allows to nest the tables when not in use, as table top is foldable. All metal parts are powder coated to 60-80 microns. |
| 2952 | VISITOR CHAIR FOR SEMINAR ROOMFXD ARMS With PC Legs * Click Low Back Visitors chair * Powdercoated Sledge Base * Fixed Arms * Fabric Upholstered Cushion Seat & Back |
| 2953 | TABLE FOR EXAM & PROCEDURE ROOMSIZE: 800W X 525D X750HTTable top is 25mm thk PLBUnderstructure in Sq 25 tube with powder coating finish200*800 Modesty |
| 2954 | CHAIR FOR EXAM & PROCEDURE ROOM FXD ARMS With PC Legs * Click Low Back Visitors chair * Powdercoated Sledge Base * Fixed Arms * Fabric Upholstered Cushion Seat & Back |
| 2955 | TABLE FOR MEDICINE PREPARATIONSIZE: 1500LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2956 | CHAIR FOR MEDICINE PREPARATION ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat |
| 2957 | TABLE FOR DELUXE PATIENT ROOM / WAITING AREA / SINGLE ROOM / TWIN ROOM SIZE: 1500LX600DX750HT Table Top- Made of 25mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Gable End And Modesty - Made of 18mm thick prelaminated particle board of approved shade confirming to E1 norms. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. |
| 2958 | CHAIR FOR DELUXE PATIENT ROOM / WAITING AREA / SINGLE ROOM / TWIN ROOM ADJ ARMS* . Medium Back Mesh Chair* AC 60 Mesh * Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height) * Nylon Base * Fabric Upholstered Cushion Seat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender