Tender For Repairing And Plastering Of Terrace To Prevent Leakage At Various Locations In The Leased Portion And Conference Hall On The Second Floor Of Dgm (Oa) Office Building At Mahaveer Nagar, Pali, Ba-Jodhpur
Tender Value
5.65 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
1 days left
EMD
11305
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Plastering Of Terrace To Prevent Leakage At Various Locations In The Leased Portion And Conference Hall On The Second Floor Of Dgm (Oa) Office Building At Mahaveer Nagar, Pali, Ba-Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 2 | (i)Single socketed pipes. |
| 3 | 110 mm diameter |
| 4 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 5 | Single tee with door |
| 6 | 110x110x110 mm |
| 7 | Single tee without door |
| 8 | 110x110x110 mm |
| 9 | Bend 87.5° |
| 10 | 110 mm bend |
| 11 | Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge including finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (Note:-The whole terrace so finished shall be flooded with water for a minimum period of ten days for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : ) |
| 12 | 1:4 (1 cement: 4 coarse sand) with 300x300 mm chequers etc. all complete as per direction of engineer in charge. |
| 13 | Pointing on stone work with cement mortar 1:3 (1 white cement : 3 fine sand) as per existing colour matching with mixing red & yellow colour as per E/C including scaffolding upto four storeyed wherever required etc. all complete as per direction of engineer-in- charge: |
| 14 | Flush/ Ruled pointing |
| 15 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 16 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 17 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 18 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 19 | Chipping of unsound/weak concrete material from slabs, beams, columns, chhajja etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 20 | 25 mm average thickness |
| 21 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument ). |
| 22 | 25 mm average thickness in 1 layers. |
| 23 | Providing and fixing alkali resistant glass fiber mesh (minimum 145 GSM) in plaster, including cutting to required size, placing in position, fixing with nails/fasteners, overlapping of minimum 100 mm at joints, and embedding in cement mortar/plaster layer complete as per direction of Engineer-in-charge. |
| 24 | Supplying of Asian Paints Smart Care Damp Proof / Pidilite brand or equvalent materials for using terrace water proofing at site as per direction of Engineer - in - Incharge. |
| 25 | Supplying of epoxy bonding agent like PIDICRETE URP of Dr. FIXIT or ROFF brands of PIDILITE or STP or equivalent material as a bonding agent at site as per direction of Engineer - in - Incharge. |
| 26 | Supplying of Asian Smart Care crack seal / Dr. Fixit Crack seal putty or equivalent product at site to repair crackes in masonary/ plaster/ terrace plaster in external and internal plastered surface of buildings. The mix can be applied at plaster consistency and as per manufacturer ' s & specifications and as per direction of Engineer - in - Incharge. |
| 27 | Providing skill special Labour for applying water proofing of roofing work for treatment of leaked cement plastered surface of terrace of Asian Paints Smart Care Damp Proof / Pidilite brand or equvalent materials on terrace after preparation of roof and filling crackes with Asian Smart Care crack seal / Dr. Fixit Crack seal putty and again application of Asian Paints SmartCare Damp Proof / Pidilite brand or equvalent materials etc. all complete as per the direction of engineer in charge.(Note:- The Asian Paints Smart Care Damp Proof / Pidilite brand or equvalent materials and Asian Smart Crack seal / Pidilite Crack putty shall be paid in separate item.) |
| 28 | CREDIT of materials / items obtained from dismanteling being unserviceable. |
| 29 | Unservicable/Broken SCI/CI Rain water,Sanitary pipes and fittings of 75 mm to 100 mm diameter |
| 30 | Unserviceable and dismantled MS section such as tees, angle,flat,steel bar, pressed steel chowkhat etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender