Tender For Providing Foundation And Erection Of 40M Ground Based Tower Including Dismembering Of Existing 40M Tower And Provision Of Od Bts & Horizontal Gantry At Uppada , Rajahmundry Ba(Site Diverted To Iift Ponnada).
Tender Value
14.73 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
3 days left
EMD
29480
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Godavari → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Foundation And Erection Of 40M Ground Based Tower Including Dismembering Of Existing 40M Tower And Provision Of Od Bts & Horizontal Gantry At Uppada , Rajahmundry Ba(Site Diverted To Iift Ponnada).
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 4 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge. |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 6 | In cement mortar |
| 7 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 8 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. |
| 9 | All kinds of soil |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 11 | All kinds of soil. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 13 | Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. |
| 14 | All kinds of soil. |
| 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 17 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | 1:4:8 (1 Cement : 4 coarse sand(zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 19 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 20 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 22 | Foundations, footings, bases of columns, etc. for mass concrete |
| 23 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 25 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 26 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 28 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 30 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 31 | 12 mm cement plaster of mix : |
| 32 | 1:6 (1 cement: 6 fine sand) |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 34 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 35 | Making and supplying of Anchor bolts to the site for fixing the base of tower manufactured with High Density Mild Steel bars of 0.90 m length as per IS 2062/IS 432 Conforming to GR specification no GR /TWR-11/ 01 Dec 2004 threaded up to 150 mm length and welded with 80x80x10 mm thick mild steel plate at 10 mm from bottom including hexagonal double nuts as per class 5 of is 1367 with appropriate -plain and spring washers conforming to is 2016 including galvanisation of top 200mm depth of anchorbolt assembly.all complete as per the approved drawing and directions of Engineer in charge. |
| 36 | Extra for cutting of anchor bolts manually / by mechanical means embeded in R.C.C. work. {Payment shall be made for removing anchor bolts (total 36 nos of 32mm dia each) embeded in four pedestals / stems} complete as per direction of Engineer in-charge. |
| 37 | Credit of recovered steel / Anchor bolts obtained after demolishing in R.C.C work. |
| 38 | Labour charges for orienting and fixing assembly of 36 nos -32 mm dia anchor bolts in each of the 4 legs /pedastals of tower with the help of template, base plate and other base arrangements . A total of 36 numbers anchor bolts shall be oriented and fixed for each tower as per drawings of Genetic requirements No GR TWR- 04/01 Dec. 2000. Rate includes cost of necessary scaffolding arrangement etc all complete as directed by the Engineer -in-charge (Base plate and Anchor bolts will be supplied by the Department). |
| 39 | Labour for hoisting fixing and erection of 40 mtrs height Ground based structural Steel Tower as per approved Genetic requirements No.GR TWR-04/01 Dec. 2000 along with emendment dt. 29.06.2005 with all its necessary components Viz climbing ladder, platforms with railing,Antenna mounts and fixing with bolts, nuts, plain and spring washers. Cost includes necessary welding and alteration of any mismatching holes to the members wherever required complete in all respect as per direction of the Engineer -in-charge (NOTE:Rate includes cost of all operations involved in hoisting and erection of tower including hire and labour charges of tolls, plants and machinerires all insurane, safety provision , acceptance testing etc all complete and nothing extra will be paid) Tower material shall be supplied by department at site. (Weight about 9.50 MT) |
| 40 | (Rs. 10,000/- will be with held for acceptance of AT and will be released after completion of AT). |
| 41 | Painting with High gloss synthetic enamel paint of approved brand and manufacture to give an even shade for 40 m tower including horizontal and vertical gantry ( weight about 9.5 MT) |
| 42 | Two or more coats on old work |
| 43 | Structural steel work riveted , bolted or welded in build up sections , trusses and framed work, icluding cutting hoisting, fixing in position with galvanized steel sections consisting of Angles , flats, plates fabricated as per approved drawings in gratings, frames, raillings, cable trays, ladders, space frames and similar locations. The galvanizing shall be as per IS 4759 with average mass of zinc coating of 610 gm/Sqm (approximately 85 micron) . The steel sections shall be of M.S grade 'A' as per IS 2062. Cost of galvanization is inclusive. The payment shall be made as per the standard structural steel tables/actual weight whichever is less for the bare steel sectional weights . All compete as directed by the Engineer -in-charge. |
| 44 | Supplying of galvanised high tension grip bolts and nuts of grade 5.6 and of required size minimum mass of galvanised coating not less than 610 gms per sqm on bolts and nuts and other fasteners etc., (Galvanisation shall be hot dipped as per IS : 1759 standard / Zinc galvanising should be conform to IS :13229-1991 or IS 209-1992.) |
| 45 | \\"Mechanical transportation of tower members comprising MS angles, flats, plates ,pipes nuts and bolts etc., of varying sizes and lengths from existing cell tower site to proposed tower site . The entire lot of tower members shall be transported in a single lot. The job includes cost of collection of all members with required lead, loading and unloading and depositing the tower members at the desired location complete including sorting of all members, nothing extra shall be paid as per the directions of Engineer-in-Charge. |
| 46 | a)With in the lead of 20.00km |
| 47 | b) Extra over above item for transportation beyond the lead of 20.00km |
| 48 | Dismembering of existing 40 M Ground Narrow Based Tower with all its necessary components viz climbing ladder, vertical gantry ,platforms with railing,antenna mounts including fixtures and bolts, nuts, plain and spring washers etc. complete and removing by welding if required including horizontal gantry with vertical posts if any etc complete and stacking dismantled tower material at site of work in orderely manner as per bill of materials / erection drawings and weighing as directed by the Engineer -in-charge. (The weight of tower is approximately 9.50 Metric tonnes). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender