Tender For Construction of Police Station Building At Tapri, Distt.- Kinnaur . (Sh:- Construction of Building Portion, Ws&Si, Septictank, Rain Water Harvesting Tank, & Protection Wall Etc. Estimated Cost:-₹ 4,78,58,798/- Earnest Money:-₹ 9,57,200/- T
Tender Value
4.78 Crore
Estimated cost
Bid Submission
26 Jul 2026
4 days left
EMD
9.57 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Police Station Building At Tapri, Distt.- Kinnaur . (Sh:- Construction of Building Portion, Ws&Si, Septictank, Rain Water Harvesting Tank, & Protection Wall Etc. Estimated Cost:-₹ 4,78,58,798/- Earnest Money:-₹ 9,57,200/- Time:- Eighteen Months.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work in all height and depths in all kinds of soil, including saturated soils comparising of pick work, jumper work, blasting work both in soft and hard rock with chiselling and wedging out of rock ( where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site., according to the HP.PWD specification of 1990 (One thousand nine hundred ninety) volume-I (One) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off to dumping site (to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transporation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineris, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by him in all respects including all incidental charges. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Stone filling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical rammer or by hand durmoot to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) volume-I including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Providing and laying in position cement concrete of 1:2:4 (One cement : Two coarse sand) : four graded stone aggregate 20 mm (Twenty millimetre) nominal size for all work up to plinth level excluding the cost of centering and shuttering, finishing and reinforcement including curing complete and carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand : six graded stone aggregate) 20mm ( twenty millimetre) nominal size graded stone aggregate upto plinth level including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10(one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Providing and laying damp-proof course 50mm ( fifty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter) nominal size including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (Ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 10 | Random rubble masonry / polygonal uncoursed/ brought to courses with hard stones of approved quality in superstructure above plinth level upto all floor level including leveling up with cement concrete 1:6:12 ( one cement: six coarse sand : twelve graded crushed stone aggregate ) 20mm ( twenty milimetre ) nominal size at window sills, ceiling level and the like at plinth level in cement mortar 1:6 ( one cement: six coarse sand ) including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with mimimum cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with cement content not less than of 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work for wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access plat form including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for Shelves (Cast in situ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form work for Stairs (excluding landing) except spiral stair case including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form work for Small lintels not exceeding 1.5 m( one Point five meter ) Clear span modelling as in cornies window sills, string coures, bands, coping, bed plates, anchor blocks and the like including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slab and break in floors and walls under 20cm (twenty centimeter) wide including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 24 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D (five hundred) or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 25 | Square rubble mansory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement: six coarse sand: twelve graded stone aggregate 20mm(twenty millimeter nominal size) upto plinth level with : cement mortar 1:6 (one cement :six coarse) including curring complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:4 (one cement : four coarse sand) including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 28 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade on Area of slab over 0.50 sqm (zero point five zero square metre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 30 | Providing and fixing 20mm ( twenty millimetre) dia curtain rods of 1.25 mm (one point twenty five millimetre) thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. (chromium plated) brass screws and wooden plugs, etcetera wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing M.S. grills of approved pattern in frames of windows etcetra with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to steel window/ wooden frame by welding/ rawl plugs/ screw etcetra upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 32 | Providing 40x5 mm (Forty into five millimetre) flat iron hold fast 40 cm (Forty centimetre) long including fixing to frame with 10 mm (Ten millimetre) diametre bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement : three coarse sand : six graded stone aggregate) 20mm (Twenty millimetre) nominal size including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Providing and fixing oxidised M.S. (mild steel) casement stays (straight peg type) with necessary screws etc. complete.250 mm (two hundred fifty millimeter) weighing not less than 150 gms (one fifty gram) complete upto all floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 34 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing 100mm brass mortice latch & locks with 6 (six) livers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing 50 mm (Fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 37 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size. stainless steel sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) nominal size. stainless steel sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) nominal size stainless steel tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 40 | Providing and fixing 200x10mm (two hundred into ten millimetre) nominal size stainless steel tower bolts, ISI(Indian Standards Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standred one thousand eight hundred sixty eight ) transparent or dyed to required colour or shade, with necessary screws etcetra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providng and fixing 125mm (one hundred twenty five millimeter) stainless steel handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 42 | Providng and fixing 100mm (one hundred millimeter) stainless steel handless, ISI(Indian Standards Institute) marked, anodised(anodic coating not less than grade AC10 (ten) as per IS:1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etctra complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian standerd :one thousand eight hundred sixty eight) transparent or dyed to required colour and shade, with necessary screws etc. Twin rubber stopper complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providing and fixing double rebates MS channel iron doors window clerestry window framminfg manufacturing framme MS channel 125x50 mm (one hundred twenty five into fifty millimeter) and MS FLAT 125x4 mm(one hundred twenty five millimeter) as per direction of Engineer- In -Charge and apporoved drawing including hinges lock jambs beed and if require angle thrash hold of mol;d steel angle 50X25 mm (fifty into twenty millimeter) welded or rigidly fixed by mechanically means lugs with split and tails to Each jambs including steel but hinges 2.5 mm (two ppoint five millimeter)thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed rk by mechanical m |
| 45 | Providing and fixing WPC door frame 63.5x127 mm (sixty three point five into one hundred twenty seven millimeter) including all accessories of approved mark, shape, sample complete in all respect as per directed by the Engineer-in-Charge complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including Stainless Steel butt hinges with necessary screws etcetera complete entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 47 | Providing and fixing 40mm thick (fourty millimeter) thick 1st Class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping scrk by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/removed as per the direction of Engineer-in-charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be |
| 49 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm (mild steel flat fifteen into three millimeter) and nuts & bolts complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing angle iron cup board frames manufactured from M.S. angle iron section 25x25x5mm ( twenty five into twenty five into five millimetre) thickness including hinges jamb, lock jamb , beed and if required angle thrashold of mild steel angle 25x25mm ( twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means , lugs with split end tails to Each jamb including steel butt hinges2.5mm ( two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | Providing and fixing 19mm (ninteen millimeter) thick waterproof termite resistant commercial board shutters ply bonded Action TESA / Green Ply/ Kit Ply/ Century Ply make of ISI (Indian Standards Institute) Marked IS-1659 (Indian Standard - one thousand six hundred fifty nine) of uniply, green ply shutter and shelves box including vertical portion and shelves. The back side of cupboard/cabinet work shell have 6mm (six millimeter) thick water proof ply and all cut portion sheel be finished with 6/12mm (six/ twelve millimeter) thick hard wood edging including all wood work of cubboard and cabinets from finished with synthentic enamel paint of approved shade and sample etc, complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Structural steel work (TATA/SAIL/Apollo/JSW Make ) welded in single / built up section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.In trusses and trussed purlins in building complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing M.S. (mild steel) fan clamp type I or II of 16 mm (sixteen millimetre) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (reinforced cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 56 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (Ninteen into ninteen millimetre) square bar with a clear height of 85cm (Eighty five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (Forty into six millimetre) size complete with a applying priming coat of red lead paint complete (Apollo/Jai Bharat/Tata) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing 75 mm x 65mm ( seventy five millimeter into sixty five millimeter)rounded hand rails in straight length complete in hard wood as per drawing specification and as per direction of Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing mild steel tube of TATA/ SAIL /APOLLO /JSW make hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer using structure steel etcetra as required complete up to all floor level including entire carriage of material in all leads and lifts and as per drawing and technical specification and as per direction of Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Providing and laying full body matt finished vitrified floor tiles of size 600x1200 mm (six hundred into one thousand two hundred millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 60 | Providing and laying Vitrified tiles in sizes 600X600 mm (six hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 61 | Providing and laying antiskid double charged vitrified floor tiles of size 600x600 mm (six hundred into six hundred millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 12 mm (twelve millimeter) thick cement mortar 1:3 (one Cement : three Coarse sand), Jointing with greycement slurry @3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 62 | Providing and laying antiskid digital ceramic glazed floor tile of size 600x600 mm (six hundred into six hundred millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK//KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 63 | Providing and laying digital glazed tiles in sizes 300X600 mm (three hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimeter)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement & matching pigments etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete with : baroda green marble complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and laying 20cm (twenty centimeter) marble in risers of steps, skirting dado and pillars laid in 12mm ( twelve millimetre) thick in cement mortar 1:3 (one cement : three sand) and jointed with grey cement and pigment to match including rubbing and polishing complete as approved pattern finish upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 4mm thick teak ply over 6mm (six millimeter) thick water proof ply with decorative surface on one face with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | Providing and fixing plain square edged cover fillets (beading) 25mmx12mm (twenty five into twelve millimeter) section with wood screws in ceiling and lining including mitring at junctions complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing wood work in frames of false celling partitions etc.sawn and put-up in position complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 6mm (Six millimeter) thick everest board ceiling cassade with suitable screws for board in ceiling etc. complete (frame work to be paid seperatately) complete upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | 40 mm (forty millimeter) thick fine dressed red sand stone flooring over 20mm (twenty millimeter) (average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flush complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 71 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing Single socketed pipes 75mm ( seventy five millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standrad:thirteen thousand five hundred ninty two) Type A, including jointing with seal ring conforming to IS : 5382,(indian standrad:five thousand three hundred ninty two) leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing and fixing 110mm(One hundred ten Millimeter)Size Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Coupler |
| 74 | Providing and fixing 110mm (One Hundred ten Millimeter) dia Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Single Pushfit Coupler |
| 75 | Providing and fixing 110mm(One hundred ten Millimeter) Bend Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised - PVC (Polyvinyl chloride) (Polyvinyl chloride)moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592(indian standard Thirteen thousand five hundred ninety two) Type A, including jointing with seal ring conforming to IS : 5382(indian standard five thousand three hundred eighty two ) , leaving 10 mm(ten millimeter) gap for thermal expansion complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing 0.60mm (zero point six zero millimeters) thick prepainted galvanized sheet of tata/sail/jindal steel in roofing with hot dipped metallic zinc coated sheet with top of regular modified polyster RNP organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeters) dia meter with prepainted limpet and rubber washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 77 | Providing and fixing ridges or hips of tata/sail/reliance/jindal steel 90cm(ninety centimeters) over all with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20(twenty) microns over 5(five) microns primer coating plus back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J and L hooks, bolts and nuts 6mm (six millimeters) dia and prepainted G.I. limpets and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 78 | Providing and fixing valley of tata/sail/reliance/jindal steel 90cm (ninety centimeters) overall 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5(five) microns primer coating including fixing with prepainted irons J or L hooks, bolts and nuts 6mm (six millimeters) dia with prepainted G.I. limpet and bitumen washers complete in all heights with all accessories as required as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 79 | Providing and fixing, 15cm.( fifteen centimeter) Wide 40cm.( Forty centimeter) Overall semi-circular plain G.I sheet gutters with iron brackets, 40x3(Forty into three) milimetre size bolts and nuts and washer etcetera including making necessaary connections with rain-water pipe complete as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 80 | Providing and fixing MS B.P. sheet 1.66mm to 2mm (one point six six millimeters into two millimeters) thick of tata/sail/reliance/jindal in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete up to all heights as per the instruction of Engineer-in-charge (base members of steel work shall be measured and paid separately), as per the direction of Engineer-in-Charge and technical specification including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 81 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:4 ( one cement : four coarse sand) upto all floor level including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | 6 mm (six millimetre) cement plaster of mix in cement mortar 1:3 ( One cement : three coarse sand) complete upto floor level including curing complete in the carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per direction of the Engineer-in-charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gm/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali & fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninty litre per ten square metre) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square) over an under coat of primer applied @ 0.80 ltr/10 sqm (zero point eight zero litre per ten square meter)of approved brand and manufacture complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Distempering with Oil Bound Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Providing and fixing GRC cladding of unistone on exterior wall surface etc. on 12mm (tweleve two) millimeter) thick cement plaster 1:3 (one cement : three cementapproved shade and sample with suitable screws etc. (frame work to be paid separately) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing Float glass panes of nominal thickness 4mm ( four millimetre) make of Modiguard, Saint Gobain, Asahi (weight not less than 10kg/sqm (ten kilogram per square metre) for renewing glass panes with putty and nails wherever necessary including racking out the old putty complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 93 | Providing and laying 60mm (sixty millimeter) thick faciory made cement concrete interlocking paver block of M -30 (M- thirty) grade made by block making vibratory compaction, of approved size, design & shape, laid machine with strong in required colour and pattern over and including 50mm (fifty millimeter) thick compacted bed of coarse sand, filling the joints with line sand etc. all complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 94 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimeter) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement: three Sand) including earth work and laying 10 cm (ten centimeter) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm (fourty millimeter) nominal size and 7.5 cm (seven point five centimeter) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm (twenty millimeter) nominal size) and finished with a floating coat of neat cement complete as per standard design all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 95 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqmmixed (zero point four eight eigth killogram per square meter) with water proofing cement compound @ 0.253 kg/sqm. (zero point two five three killogram per square meter). (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (ten centimeter). (c) third layer of 1.5 mm(one point five millimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm(one point two eight nine killogram square meter) mixed with water proofing cement compound @ 0.670 kg/sqm(zero point six seven zero killogram per square meter) and coarse sand @ 1.289 kg/sqm.(one point two eight nine killogram per square meter) This will be allowed to air cure for 4(four) hours followed by water curing for 48as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing Acostic tile ceiling cassade in power coated G.I prame work as per direction of Engineer-in-Charge (frame work and cover fillets to be measured and paid for separately) etc. all complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing Aerolite tile (60x60 centimeter) ceiling cassade in power coated G.I frame work as per direction of Engineer-in-Charge (frame work and cover fillets to be measured and paid for separately) etc. all complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Providing and laying tactile matte flooring of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (at the rate three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 99 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level:In one coat complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in charge complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 102 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The recover of useful stones recovered during demolition i.e. 270.95 cubic meter shall be recovered form the contractor @ Rs. 300/- per cubic meter from Each running bill on the pro data basis. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | Provinding readymade steel cabinets, cupboards, lockers of approved shade and sample as per the direction of Engineer-in-charge complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Constructing soak pit 1.20x1.20x1.20x1.25mm (One point two zero into one point two zero into one point two five metre) filled with brick bats including S.W. drain pipe 100mm (One hundred millimetre) and 1.20m (One point two zero metre) long as per design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 105 | Providing and fixing 110mm (One hundred one millimetre) nominal size PVC Cowl for ventilating pipe (Finolex/ Supreme/D-Plast make) confirming to IS 13592 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5(two point five) circular shape 450 mm (four fifty millimeter)internal diameter complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:5:10 (one cement : five coarse sand) : ten graded stone aggregate 40 mm (fourty millimeter) nominal size) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 108 | Providing weep holes in brick masonry / plain / reinforced concrete abutment, wing wall./return wall with 100mm (One hundred millimeter) dia PVC pipe, extending through the full width of the structure with slope of IV :20H (twenty horizontal) towards drawing face, complete as per drawing and MORTH technical specification.clause 2700 & 2200 (Two thousand seven hundred and two thousand two hundred) as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 109 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and M.O.R.D. technical specifications clause 1204.3.8 (one thousand two hundred four point three point eight) as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 110 | Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg Each as per drawing and technical specifications Clause 1301 complete including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 111 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m(one point five meter), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimeter) in depth, including consolidating Each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty meter) : Pipes, cables etc, not exceeding 80 mm(eighty millimeter) dia. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Providing and fixing white vitreous china pedestal type water closet (European type Single seat of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed as per the directi |
| 113 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm with integral complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 114 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 115 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/ Parryware/ Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm ( Six hundred thirty into four hundred fifty millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 116 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 117 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen Sink with drain Board: 510x1040 mm bowl depth 250mm entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 119 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 120 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 121 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera complete including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 122 | Providing and fixing CP brass toilet paper holder 1151N complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 123 | Providing and fixing 110mm(One hundred ten millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 124 | Providing and fixing 75mm(Seventy five millimetre) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/sqcm (six kilogramme per square centemtre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 126 | Providing and fixing 75mm(Seventy five millimetres) dia PVC clamp Finolex/ Supreme make of approved design with steel screws and rawl plugs complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 127 | Providing and fixing 110 mm (One hundred ten millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 128 | Providing and fixing 75 mm (Seventy Five millimetre) dia nominal size PVC of ( Finolex / Supreme make) single equal branch with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 129 | Providing and fixing 110mm(one hundred ten millimeter) dia. PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 130 | Providing and fixing 75mm(seventy five millimeter) dia.PVC(Polyvinyl chloride) double equal branch plain ISI(Indian Standards Institute) marked including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 131 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 132 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 133 | Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 134 | Providing and fixing 75 mm (Seventy Five millimetre) nominal size PVC collar complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 135 | Providing and fixing 110x75mm ( One hundered ten into seventy five millimetre) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 136 | Providing and fixing 600 mm (six hundred millimeter) long PTMT towel rail with total length of 645 mm,(six hundred fourty five millimeter) width 78 mm(seventy eight millimeter) and effective height of 88 mm,(eighty eigth millimeter) weighing not less than 190 gms.(one hundred ninty grams) PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) : including cost of cutting and making good the walls and floors :complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 137 | Providing and fixing 1216 (16mm OD ) pipe(one thousand two hundred sixteen) (sixteen millimeter outer diameter.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications rk by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all le |
| 138 | Providing and fixing 1620 (20 mm OD ) pipe(one thousand six hundred twenty) (twenty millimeter outer diameter.)Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450(indian standard fifteen four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications aas per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 139 | Providing and fixing 15 mm (fifteen millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 140 | Providing and fixing 20 mm (twenty millimetre) nomina bore G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work and Exposed on wall including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 141 | Making connection of G.I. distribution branch with G.I. main of size 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by Providing and fixing tee including cutting and threading the pipe (TATA/JINDAL (Hissar), Tata Steel Tubes Ltd, Prakash Surya, B.S.T.) etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 142 | Fixing water meter and stop cock 200 mm(two hundred millimeter) nominal bore in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 143 | Providing and fixing 20mm (Twenty millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 144 | Providing and fixing 25mm (Twenty five millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 145 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 146 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm ( one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty millimetre) nominal size and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engas per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes impose |
| 147 | Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 148 | Providing and fixing 20mm (twenty millimetre) nominal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 149 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 150 | Providing and fixing 15mm (Twenty millimetre) nominal bore C.P. brass bib cock of Jaquar (CON-047KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 151 | Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of Long body Jaquar (CON-107KN) with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware conforming to IS standards and weighing not less than 690 gms (six hundred ninety grams) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxesimposed by the Government. |
| 152 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock of Jaquar ( CON-059 KN ) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 153 | Providing and fixing PTMT Soap Dish Holder make of Prayag having length of 138mm,( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ), height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jaquar/ CZAR/Cera make (OPAL Series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 154 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre)as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.te responsibility of the contractor which shall have to be duly compensated by him in all respects including all incidental charges. including all incidentals Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender